Work status error

Hi gurus,
When i`m implementing the work status when i lock a data region and i try to send data instead of receive a message like "this data region has submitted work status" i received and error message that says "Error when try to check work status".
It doesn't allow me to send data but when i try to open the region via BPC for web to change the work status it shows me an incorrect current work status.
Anyone has the same problem
Thanks in advance.

Hello eljosetxu,
This may be related to some problem in UJW_STATCODE table.
In this table, you should see in STATUS colums an indentifier number for the work state and an sequential number in column ORDERN (for each apset) starting in 0.
The other columns will show what you have defined during work status configuration where 0 is manager, 1 is owner and 2 means both.
In table /1CPMB/LKWS<APPSET_PREFIX><APPL_PREFIX> you can check what is the SATUS for each locked intersections and compare.
As far as I know, the numbers in ORDERN must be sequential. Confirm that the column STATUS for the data region in the LKWS* and UJW_STATCODE tables are the same.
Hope it helps! Let me know what you'we found
Debora

Similar Messages

Work Status error BPC NW 7.5

Hi,
I am having some trouble with Work Status for BPC NW 7.5.
When trying to change status I always get same message: "Controlled by rule has been violated". I've tried with differente ussers and I am suer they have all rights necessary to change status but, there is no way.
Please help.
Thanks in advance,
Raul

We have already made all tasks related to Work Status:
1. Configuring Work Status u2013 Like Unlocked, Submitted and Approved
2. Enter the Owner property in dim Entity
3. Configure the work status setting at the application level: Entity as owner, Time and Category "YES"
4. Aplication Administration --> Define the hierarchy as H1. We have defined the hierarchy in Entity PANETH1 also
But still didn't work... as we though it should. We have gone through the Admisnitration manual for BPC NW75 and check everything again. Everythign was correct. But, we checked all appendix also. There is where SAP explains how is all working. In some stage, BPC thogh we were the manager (because of the Entity hierarchy structure) but our Work status was not define for a Manager (because we don't need it). We made a try with everything in BOTH and is Working!!! Cool.
We are going to adjust everythign to our requirements now. But, we now itiis working correctly.
Thank you very much for you help.
Raul

Error changing work status in EPM Addin

    Hi all,
    I'm trying to change the working status for a category and a specific period.
    However in doing so the system is generating error
    Failed in checking status in control
    Failed or unexecuted control sets exist in your data region
    I'm doing this from Excel client, option EPM tab, save data, change work status.
    Working state has already configured in the Web Administrator
    That I can do to fix this error?
    Thank you for your help
    Regards,
    Guillermo

Hi all,
According to what the 1795953 note says and thread sent by Dinesh,
the problem is some of the Entity members are not part of the Group selection on Ownership settings. This is the configuration that I have for the entity
    I'm trying to change the work status for the item Org_so, who is the parent of the other.
    I have another question, what is the relationship between the controls and work status,
    if controls have not been executed you can not change work status?
    Best regards,
    Guillermo

Error checking work status

Dear ALL,
I'm working on SAP BPC 10.0 NW version.
So, I'm launching a script logic for a particular company, actually working on the currency translation but unfortunately I got an error "Error checking work status".
I did enable the Work Status in my model, and I did also put 2 Controls in it. But, I'm very sure the 2 Controls are all pass which I could also see the same from Control Monitor.
Any part which I could have missed out or any steps I have to work on in order to skip the error?
BR,
Antony

Hi Antony
Finally the problem was bigger than I thought; the user uploaded data from previous period and it’s affected the currency conversion, because it is configured at periodic way
The access member profile for each group was configured wrongly, too
We fix this point and the currency conversion and the work status pass OK
Thank for your time answer its
Regards
Ariel

Package Log - Error checking work status

Hi, Experts,
We are using SAP BPC 10 NW.
When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
++++++++++++++++++++++++++++++++++++++++++++++
/CPMB/MODIFY finished in 0 seconds
/CPMB/ALLOCATION_LOGIC finished in 449 seconds
/CPMB/CLEAR finished in 0 seconds
[Selection]
SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
[Message]
RUN_LOGIC:
Error checking work status
+++++++++++++++++++++++++++++++++++++++++++++++
There is no work status activity at REVISAO and PROJETADO category members at this model.
Would anybody help us to understand what is happening?
Best Regards,
Ana Teresa

Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo

Error when trying to delete a work status option

I am trying to delete one of our work states and I keep getting an error indicating the "operation has timed-out", has anyone seen this before?
Thanks!

Hi Amy,
Whenever you try to delete a particular work state, it will delete all the work status related information from the database. This means that all the work status previously set for the transactional data will be lost. How many records do you have with teh work status set? You might be getting this error because there might be lot of records for whom the work status has been set.
You might try to first take a bakup of all the work status related information from all the applications, then delete them. And then try to delete your work state.
Hope this helps.

Work Status --ABAP error at BPC Web Interface

Hi,
I'm receiving an error in the Web Interface for adjusting
the Work Status settings. When selecting Active CV or Another CV and
then clicking on the arrow at right the error message that pops up
says:
Error: a dump occurred on the ABAP stack.
Thanks,

Hello - I received the same error message. I would look at the 'how to' paper on Work Status. It was very helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70f99970-8c09-2d10-d486-8989be63d8cc?QuickLink=index&overridelayout=true&47047071760394

Redwood CPS job goes to status ERROR but job works completes ok in SAP

Hi
When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
Checked the operator messages and all it says is:
Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
- doesn't elaborate why the job has status Error.
Is this saying the CPS part had an error or the ABAP part??
Ross

Hi Anton
I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
Cheers
Ross

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Material statuses error message should go after entering Trackin No in PO

Hi All,
I have created one Material statuses with error message, I have created material with the use of that material statuses..
Its working fine,At the creation of PR, PO I'm getting that Error message..
My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
Is it possible?? how to do it?? plz help me...
Is it possible in standard SAp???
thanks and regards
rames reddy

Hi,
You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
And then assign field selection key to PO Document type and save.
SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
The same you can do for PR document type by having a field selection key for PR document type.
Regards,
Biju K

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

Time machine backup error OS Status error 2

Time machine has been backing up to newly replaced Time Capsule with no Time Machine issues until today.
There have been a few Time Capsule 'amber flashing light' moments, solved with a reset.
But after one such reset this morning, despite the green light being steady, the error message stated in the title above has appeared.
Time capsule is visiblle and properly configured, according to Airport Utility.
On the menu bar, the Tme Machine logo is grey, and states "Time Machine is not configured".
In the Time Machine preferences window, have re set the Time Capsule as the backup disk (several times).
Time Capsule green light is on, and I can hear it whirring into action when I select it as back up disc.
The complete message reads:
Time Machine can’t access the backup disk “(my name) Time Capsule”. Time Machine backup OS status error 2.
I am Running OSX 10.6.7
Time Capsule 1 TB
Less than one month old, and the second time calsule replacement form Apple.
Can anyone please shed any light on this?
Many thanks
Lorraine

Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
See this post (Major Dude) that is in the More Like This section:
Time Machine and ReadyNAS Duo

BPC 7.5 - Multiple Usernames in the owner property for Work Status Update

Good Day,
We have an issue in our BPC system, where our organisation dimension(entity) has an owner property which is maintained with multiple usernames. The issues comes in when we have to update the Work status for locking. The system recognises the first username as the owner property and only that first username can change or update the workstatus in BPC. We have a problem with that because we have a team of people that manages process.
The error that we get when one of the usernames other than the first one tries to update the work status is - "User not a Manager/Owner, Work status cannot be updated".
Please advise of the solution we are BPC 7.5 SP17
Thanks,
Themba

Hi Themba,
We are combining Team and multiple users without issues:
Vadim

Work Status and Script Logic

Hello, gurus!
Explain please situation with a script logic and work status of data.
I have the script logic file, with code, for example:
*XDIM_MEMBERSET UNIT = 19
*XDIM_MEMBERSET AP_TR_SA = COMMON
*XDIM_MEMBERSET C_DATASRC = MANUAL
*XDIM_MEMBERSET RPTCURRENCY = USD
*XDIM_MEMBERSET CATEGORY = PLAN,ACTUAL
*XDIM_MEMBERSET ENTITY = C1113,C1111
*XDIM_MEMBERSET TIME = 201007
[#CF0700]=([AP_TR_ACCOUNT].[CF0612])-([AP_TR_ACCOUNT].[CF0611])
*COMMIT
Work status is established for (ENTITY=C1113; CATEGORY=ACTUAL,PLAN;TIME=201007) as Approved (data is locked).
Will execute this logic for (ENTITY=C1111;CATEGORY=ACTUAL,PLAN;TIME=201007)? Should I divide this script logic for C1111 and C1113?

I have 2 entities (companies) - C1111 and C1113.
I have the script logic for calculation keyfigures for this entities (it is automatic chain).
C1113 has entered the data and has locked it. When the C1113 will enter the data, the script logic will not been executed.
I have tested it and I have received that:
the script logic has broke when system has tried to write data into database after "Error Work Status check".
If I change the line of script logic as
*XDIM_MEMBERSET ENTITY = C1111,C1113
calculation for C1111 is executed.
Best Regards,
Svetlana.
Edited by: Svetlana Kazaneva on Sep 6, 2010 1:17 PM

Work status error

Similar Messages

Maybe you are looking for