Package Log - Error checking work status
Hi, Experts,
We are using SAP BPC 10 NW.
When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
++++++++++++++++++++++++++++++++++++++++++++++
/CPMB/MODIFY finished in 0 seconds
/CPMB/ALLOCATION_LOGIC finished in 449 seconds
/CPMB/CLEAR finished in 0 seconds
[Selection]
SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
[Message]
RUN_LOGIC:
Error checking work status
+++++++++++++++++++++++++++++++++++++++++++++++
There is no work status activity at REVISAO and PROJETADO category members at this model.
Would anybody help us to understand what is happening?
Best Regards,
Ana Teresa
Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo
Similar Messages
-
Dear ALL,
I'm working on SAP BPC 10.0 NW version.
So, I'm launching a script logic for a particular company, actually working on the currency translation but unfortunately I got an error "Error checking work status".
I did enable the Work Status in my model, and I did also put 2 Controls in it. But, I'm very sure the 2 Controls are all pass which I could also see the same from Control Monitor.
Any part which I could have missed out or any steps I have to work on in order to skip the error?
BR,
AntonyHi Antony
Finally the problem was bigger than I thought; the user uploaded data from previous period and it’s affected the currency conversion, because it is configured at periodic way
The access member profile for each group was configured wrongly, too
We fix this point and the currency conversion and the work status pass OK
Thank for your time answer its
Regards
Ariel -
Error changing work status in EPM Addin
Hi all,
I'm trying to change the working status for a category and a specific period.
However in doing so the system is generating error
Failed in checking status in control
Failed or unexecuted control sets exist in your data region
I'm doing this from Excel client, option EPM tab, save data, change work status.
Working state has already configured in the Web Administrator
That I can do to fix this error?
Thank you for your help
Regards,
GuillermoHi all,
According to what the 1795953 note says and thread sent by Dinesh,
the problem is some of the Entity members are not part of the Group selection on Ownership settings. This is the configuration that I have for the entity
I'm trying to change the work status for the item Org_so, who is the parent of the other.
I have another question, what is the relationship between the controls and work status,
if controls have not been executed you can not change work status?
Best regards,
Guillermo -
Script Logic - Check Work Status
Hi,
I am using the standard process chain "/CPMB/DEFAULT_FORMULAS_LOGIC" to trigger Script logic file.
I have created some logic to clear and copy data to a targer category. I want to check the workstatus of the target category and if it is locked i want to clear/copy to fail.
I am not sure how to go about this? I was thinking of adding the following but that is just a guess!
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
any advice would be helpful.
Thanks,Hi,
Ideally did want an option for the user to select option to check whether the copy should happen if the data had been locked. Have done this via the standard COPY package.
Can this be done with the script logic e.g. using paramters in the package?
Or if you create a script logic file does it always check the workstatus?
thanks -
Hi experts,
Coud anyone say how to fill Locks Log Table UJW_UPD_LOG. It found in programm UJW_WS_TEST.
I need to analyse Work Status historical log - no only last state.
Thanks a lot,
Oleksandr.Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo -
Hi gurus,
When i`m implementing the work status when i lock a data region and i try to send data instead of receive a message like "this data region has submitted work status" i received and error message that says "Error when try to check work status".
It doesn't allow me to send data but when i try to open the region via BPC for web to change the work status it shows me an incorrect current work status.
Anyone has the same problem
Thanks in advance.Hello eljosetxu,
This may be related to some problem in UJW_STATCODE table.
In this table, you should see in STATUS colums an indentifier number for the work state and an sequential number in column ORDERN (for each apset) starting in 0.
The other columns will show what you have defined during work status configuration where 0 is manager, 1 is owner and 2 means both.
In table /1CPMB/LKWS<APPSET_PREFIX><APPL_PREFIX> you can check what is the SATUS for each locked intersections and compare.
As far as I know, the numbers in ORDERN must be sequential. Confirm that the column STATUS for the data region in the LKWS* and UJW_STATCODE tables are the same.
Hope it helps! Let me know what you'we found
Debora -
Hi,
Assuming category, entity, time are my work status dimension, and i have decided to give a work status of 'approved' to category=budget, entity=sales, time=2015.total, hence category and entity are both base members while time is a parent member. However i DID NOT click on "include children in the data region". But later when i checked the work status of 'category=budget, entity=sales, time=2015.aug", it has turned into "approved". Don't i have to click on "include children in the data region" in order to flow this down to the children?
Regarding the work status checking in data packages, what does the following mean:
- Select whether to check work status settings when deleting comments?
- Select whether to check work status settings when importing data?
- Select whether to check work status settings when running logic?
Thanks and regardsHi,
You are absolutely right. Ideally, if "Should children of this data region be included?" is not selected, the children should not be included. However, I am not sure why this has happened in your case. Will definitely check on this and get back to you.
For your second query regarding the DM packages.
If you select Yes, work status settings will be copied with the data. If you select No, work status settings are not copied with the data.
Hope this helps. -
Hi,
We are using script logic in the package.
We would like to prevent the packed from running on u201Clockedu201D data.
Below is the code of the script. The statuscode of locked data is 3. The maxstatus parameter in stored procedure is set to 1 (unlocked).
*SysLib Stored_Procedure_Wrapper.lgl
//=============================================
// Currency translation logic
//=============================================
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','GLOBAL','%SCOPETABLE%','%LOGTABLE%','' ,'' ,'', 1)
Unfortunately we still can write to the locked intersection.
We are using BPC MS 5.1.
Could you give us some advise how to solve this problem?Mariusz,
If you define a business rule in a script logic file and call the script
logic file from data manager, the data generated by the business rule
will be posted to a locked data region since the business rule engine
cannot check Work Status. BPC has the limitation of the business rule. It has been earlier requested as an enhancement.
Regards -
Hi,
We are implementing BPC 7.5 NW version and having SP04.
we have an Entity A (parent entity) and unerneath that we have two entities B and C.
In the Entity Dimension we have an owner peroperty in which for Entity A we gave a user (say Administrator as the owner) and for both Entity B and C we gave another user (say-BPcuser as the owner)
So the user Administrator of Enitity A is the owner of Entity A and he is also now the Manager for Enitity B and C.
After making these settings, when we try to modify work status through BPC for Excel it takes to BPC for WEB and in BPC for WEB we make the following selection.
Category-Actual
Entity- A
Time -2010.April
And in the next screen we are changing the satus from sUBMITTED to APPROVED ( TO lock the Data region) and save it.
Now when we input any data for this data we are getting Check work status settings.( which is our desired output)
However when we try to change the work status setting From Approved to Submitted (to unlock the data region) with the ID Administrator (i.e Owner of Parent Entity A) it is getting saved.However when we try to input the data it is still showing check the Work status settings.
So can you please suggest me how to unlock the work status settings now so that we can post the data for that data region.
Thanks,
Shankar.vHi,
If you are in a development system and if you want to delete all the locks on the data at one go......you could try reordering your work states (rearrange your last work state for example by moving it one step further up). You get a message on the screen that this will delete all the locks on the data....just confirm the message. You could change the order again back to the original order.
Above is only if you are working on a development system and for test if you want to delete all the existing locks at one go.
If your system wants only to unlock a specifc dataset, select the required members of the work state dimensions (refer to your appliation and work staus to know what the work status dimensions are for your application). Note, if your selection includes any parent member for a dimension current work status is not displayed.(This is again as per the work status set up in BPC that work status is stored at non-parent members).
Please let me know if you still have any issues in deleting the locks -
Update Content and Creation of New Packages Fails, Errors in PKGXFERMGR.log
I am having a problem distributing packages to Distribution Points. This has worked for over a year previously. I believe there may be a problem with IIS configuration somewhere but I cannot find what the delta may be.
When I look at the pkgxfermgr.log I see several things.
First, I see the jobs that I have started are stuck in a pending state. Example below:
==== Found 19 send requests in outbox D:\Program Files\Microsoft Configuration Manager\inboxes\PkgTransferMgr.box\requests.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UESC1~ Job: J4YJMEGH Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UFSC1~ Job: JPZJ1IM3 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UGSC1~ Job: J8OKU91R Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UHSC1~ Job: JM51YI72 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UISC1~ Job: J5C9KJX1 Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:25~ Start: 12:00 Finish: 12:00 Retry: 10:55~
SWD PkgID: SC1001ED SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
For each job, I see the following for errors:
Checking for sending capacity. Used 0 out of 15.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 2 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VSSC1, Destination: PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xF94) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 1 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VTSC1, Destination: PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xCA8) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
No (more) send requests found to process. SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Waiting for new/rescheduled send requests, Maximum Sleep Time = 60 minutes
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.480 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12B.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12B.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.482 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12A.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12A.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Performing preactions package SC1001F4, Distribution point PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Performing preactions package SC1001F4, Distribution point PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.687 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12A.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.741 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12B.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Any help would be greatly appreciated.Hi,
0x80070003 = The specified path couldn't be found.
Please try to disable the AV software.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error while checking the status of Oracle Cluster ware
Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [ GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [ CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1 STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS MThe permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work. -
5 error while checking job status
Hi,
We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
5 error while checking job status.
The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
Can anybody help why we get the error.
Regards,
ShashankHi Shanshank,
Try to Debug the FM.
Rgds,
Ravi -
WLC 2504 - error in log can't work out
Hi All,
I've been getting this error in my WLC logs and cant work out what it is. Can anyone advise?
*spamReceivedTask: Mar 27 18:36:20 #LOG-3-Q_IND: smap_irad.c:48107 The system is unable to find WLAN1 to be deleted; AP 88:75:56:da:18:60
*spamReceivedTask: Mar 27 18:36:20 #LWAPP-3-WLAN_ERR2: smap_irad.c:48107 The system is unable to find WLAN1 to be deleted; AP 88:75:56:da:18:60
Seems to be occuring from all AP's. The Wlan appears to be ok?
Regards
David(Cisco Controller) >show WLAN 1
WLAN Identifier.................................. 1
Profile Name..................................... WestminsterHouse
Network Name (SSID).............................. WestminsterHouse
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 17
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ 3000 seconds
--More or (q)uit current module or to abort
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... Cisco_b3:aa:24
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. management
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
--More or (q)uit current module or to abort
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11b and 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More or (q)uit current module or to abort
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
--More or (q)uit current module or to abort
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More or (q)uit current module or to abort
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
--More or (q)uit current module or to abort
(Cisco Controller) > -
Error checking no longer works when filling in a form - FF 29
I am running FF 29.0 and when I try to fill in the following form, the error checking on the form does not work, I cannot tick the checkbox and the 'Submit' button remains 'greyed-out'.
The problem persists in 'Safe' mode. Here is the form in question:-
https://digitalmailbox.com.au/registration
Hope a solution can be found.
Regards
Dennis WI don't normally use Internet Explorer but on this occasion I thought I would give it a try.
IE 11.0.9600.17105 handles the above registration page without a problem.
Is the problem with FF 29 or with the webpage in question?
Regards
Dennis W -
Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
SebHi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
HELP! Iphone 3G wont allow me to use!
The phone will not open. Front screen shows USB cord pointing towards an Itunes icon. Only other option is emergency call! Help, what do I do?!
-
Restricting The DragSource to a particular area in JPanel
Hi everyone, I have a JPanel which I have registered as a Drag Source as well as a a drop target. Now I have a header in the JPanel and need to restrict the Drag source to the rest of the JPanel except for the header. Also there are various polygons
-
How to turn off recuring automatic payment for an app
My daughter purchased "Sing!" by Smule, a karaoke app. Unfortunately, this has a weekly recurring automatic payment. How do I turn it off?
-
Default settings at User level
Hi All, Please explain how to do the default settings at User level. Appreciate early action.
-
Hi hussein, We have installed EBS R12.0.6 for our new client, it's default database is 10.2. The requirement is to RAC the database. But our client software acquisition is quite troublesome :( They said thay bought license for 11g database RAC. And t