Work Status log

Hi experts,
Coud anyone say how to fill Locks Log Table UJW_UPD_LOG. It found in programm UJW_WS_TEST.
I need to analyse Work Status historical log - no only last state.
Thanks a lot,
Oleksandr.

Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo

Similar Messages

Package Log - Error checking work status

Hi, Experts,
We are using SAP BPC 10 NW.
When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
++++++++++++++++++++++++++++++++++++++++++++++
/CPMB/MODIFY finished in 0 seconds
/CPMB/ALLOCATION_LOGIC finished in 449 seconds
/CPMB/CLEAR finished in 0 seconds
[Selection]
SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
[Message]
RUN_LOGIC:
Error checking work status
+++++++++++++++++++++++++++++++++++++++++++++++
There is no work status activity at REVISAO and PROJETADO category members at this model.
Would anybody help us to understand what is happening?
Best Regards,
Ana Teresa

Hi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo

Work status

Hi Gurus,
I am trying to design security for users. For users who can approve the plan i am setting the authorizations with task profile as "set work status". But when user logs in to BPC web to change the work status, The data region is either blank/white screen. The user is not able to proceed to next step.
I have maintained owner dimension also. But when gave user authrizations as secondary sys admin + lockings user is able to see the data region and proceed to next step.
My question with only set work status authorization can user change the status? or user needs to have secondary system admin + locking tasks assigned to complete status change.
Regards,
Reddy.

I'm pretty sure that users can be owner of a work status node, even if they have read-only (not write) access to that node. This is easy enough for you to test; just change the member access profile for that one user, and see if it solves the problem.
But I suspect it won't solve it.
You say that users with secondary admin rights can change work status, which means you have most f the setup (at the application and dimension levels) correct. There must be something about these users, or their task profiles, or their member access profiles, or the assignment to them of the OWNER property of the drive dimension, which is not correct.
Make sure you double-check all these, and then process all the dimensions in the application & process the application itself. It's a bit of looking for a needle in the haystack, but there must be something that's not correct. The fact that it works for other users means that you're very close.

Work status setting

Dear Experts,
Basically, I am from 5.1.
In 5.1, For Application work status settings we have, "AppSet Dim Names" , "WorkState", "Member Validation" Columns.
But in 7.0NW i can see only "AppSet Dim Names" , "WorkState" columns.
Without "Member Validation" column how can we configure work status?
Please help me...
Thank alot in advance...

Hi Friend,
I Appreciated you with points!
Suppose, I have two users Owner and a normal user.
My entity Dimension is the secure dimension. so, Owner property is configured.
Now, Owner logged in to Admin and Set "Locked" for "Started","Submitted" and "Aproved".
And Normal user logged in ...and access input templates...and submitting data...
Now My question is.....When Owner "locked" the workstatus....How can a normal user can submitting the data..
It should be locked ..right?
Could you please put some light on this....?
Thanks lot in advance....

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

Likely Apple problem
iTunes Store - 20% of users are affected
Users are unable to make purchases.
http://www.apple.com/support/systemstatus/

Work Status Report Date and Time Setting

Hi all
We are running BPC10 on servers configured with Central European Time which is currently 2 hours ahead of GMT allowing for Daylight Savings Time.
From what i can see in BPC10 date and times are now stored in GMT (Zulu time) in the Audit activity tables so when a user updates the work status at say 11:00AM local CET time then a value of 09:00AM GMT is stored in the Audit Activity Header table.
We have a report in excel that uses the EVLCK formula and will return the correct value of 11:00 am however if we run the Work Status Audit report on the Planning and Consolidation home page with user preferences set to Central European Time +1 then the time is displayed as 10:00am suggesting that daylight savings time is not accounted for. We need to set the time to Eastern European time +2 hours to display the correct figure.
Can anyone explain why this happens? Has DST been overlooked?
Rgds
Alan

Hi Alan,
probably it's a bug, I think it's better you open an OSS message to SAP.
Regards
Roberto

Work Status Report

Hi,
I was wondering if there is a work status report available in the system? What I would like to see is a summary of which dimensions are locked in BPC so that I can monitor it to ensure that someone doesn't accidentally open something by mistake.
Currently I have to go through BPC Web and check the dimensions manually. If there is no report can someone confirm where the work status data is stored so that I can have one built.
Is this the table (where "finance" is the application) - [dbo].[tblFinanceLock] ??
thanks in advance.

Hi,
You're right, work status information are stored in "tbl<App>Lock".
Concerning your first question, you can build a BPC for Excel report that retrieves work states.
Having for example an expansion on all entities, you can use EVLCK function (from 5.1 version) or EVASV function (in CPM 4.2). You can then do whatever you would like to send it to others via distribution list or other.
Hope this will help.
Kind Regards,
Patrick

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)

Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787

Work status at application level

Hi Team
Can any one explain purpose of keeping dimension members in work status settings where dimensions are not relevent for work status at application level?

Hi Miguel,
You are comparing work status and the validation rules. However, these 2 are completely different functionalities.
For maintaining validations, please take a look at the below links from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/72/027eddf803405eb131738b655408ce/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/d9/7e49e5b686462a9f2a2d38c98b8446/content.htm
For work status, please refer to the below links from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f8/d51b881cfa4c5992de481ccfa05db3/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/75/712b5c7be845cbb1e76cfe78650343/content.htm
Hope this helps.

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Issue with setting work status

Hi Gurus,
I am using the standard work status (copied from Appset), in the applications work status setting I have set entity as owner and time and category as yes for work status. In the entity dimension under owner and reviewer property I have keyed in the correct user ids. I am using one of the owner user id to perform the activity mentioned below
The issue I am facing is when I select modify work status from Esubmit menu it takes me to the web interface for setting the Work status after selecting the value for the 3 dimensions mentioned above when I click on OK it pops up a message that you are not authorized to change the work status setting please contact system administrator. The owners have admin profiles for auth so they should be able to do pretty much everything.
would appreciate help on this
BPC 5.1 Support Pack 2
Thanks

Make sure all the members within the parent hierarchy you are using have owners assigned.
In BPC terms; Managers are the owners of parents, owners are the owners of members.
For example the owner might be a clerk entering forecast data for a single/set of entities, (base level members). The manager owns the parent.
Also, when testing, make sure you login to the system/server/domain/network, (whatever) with the userid you will be testing with and then login to BPC. (Just to be sure.)
This should do it if you have everything else laid out!
Good Luck!

Touchpad doesn't work in log in screen

Since I updated to Lion my Touchpad doesn't work in log in screen, I have to use the keyboard arrows to move around. I can't intall the recovery because the touchpad doesn't respond!!!! Please can someone help me on how can this be fixed?

try this http://support.apple.com/kb/ht1379 and let us know if it helps. It's supposed to reset mouse speed but we'll see if it solves other things too.

Work status custom report

Hi Gurus,
I have built a work status custom report. The user was able to change status. When i run my custom EVDRE report no values are retrived for status, user and date/time stamp columns. I am using simple
EVLCK function. I think something is blocking/filtering retrival of data.
Best Regards,
Suresh.

Hi Suresh,
I am looking for the functionality in which we can display the current work status in our BPC excel sheet.
Do you mean the same when u tell work status custom report.
My actual idea is to display the current work status to the user. If you are meaning the same... can you please let me know how have you built the custom report?
Regards,
Swetha

E-mail Notification of Work Status Change

Hi Experts, I configured and triggered a BPC e-mail notification for Work Status change. However, there are few areas I would like to improve on. Please help. A sample notification message is attached below. Areas highlighted in red are the areas I would like to improve on.
Subject: You have received an automated message from %PRODUCT2%
The work status code of Entity has been changed by RCHU:
This is to inform you that RCHU has updated the work status to Submitted on 01/09/2012 16:21 UTC.
Category:C_Actual
Entity:E_1211
Time:2007.FEB
New Status:Submitted
Date/Time:01/09/2012 16:21 UTC
Here are my questions.
1. Subject line - Where do I configure the variable %PRODUCT2% ?
2. Entity - How can I display the description of the Entity?
3. Date/Time - How can I display local time instead of UTC?
Thank you in advance for your help. We are running the Microsoft version of BPC.
Edited by: Raymond Chu on Jan 12, 2012 8:17 AM
Edited by: Raymond Chu on Jan 12, 2012 8:18 AM

The periodic scripts or launchd would have to send the email. I don't think you have to do anything to send mail, just receive it, you can check that from the command line:
mail [email protected]
When you finish your message put a period on a blank line and hit return, that indiecates the end of the message.
The one butt biter is that Apple puts a .forward file in all home directories that says to direct all mail to /dev/null , essentially it sends it to a black hole. You'll need to edit this file and put in your email address (if you want the email to go there) or the mails (should) wait for the user to run the mail command to read their messages.
The mail command has a fairly extensive man page:
man mail
Roger

Work Status log

Similar Messages

Maybe you are looking for