[WORKAROUND] Can only boot after exiting EFI Shell
Hello there, What happens is when I boot, this is an EFI, if I boot directly to GRUB I get the menu then the messages:
Loading Linux core repo kernel ...
Loading initial ramdisk ...
Then is just stops. There are no more messages or any thing. The only way I have found is to boot into EFI Shell then exit the shell which drops into grub which will then boot all the way.
I have efibootmgr set to boot into EFI Shell. The startup.nsh just runs 'exit'.
grub2-common 1:2.00beta2-3
grub2-efi-x86_64 1:2.00beta2-2
Linux 3.2.13-1
root/boot are a single partition. Filestsyem is btrfs compressed zlib on an SSD.
I hope this is clear enough.
Last edited by tweezerhead (2012-04-06 00:13:34)
I ran into very similar problem today, except that I'm using grub-bios.
Booting 3.2.13-1 fails at "loading initial ramdisk...", with no error message or whatsoever. The lts kernel also fails.
It turns out the downgrading the kernel from 3.2.13-1 to 3.2.11-1 fixes the problem.
Similar Messages
-
Mavericks can only boot in safe mode
In can only boot my Imac 27' (end of 2009) in safe mode.
The problem started in Lion, when the computer suddenly froze.
I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
Even with all this, I can only start in safe mode.
Here is a copy of the log. If anyone can help, I would be grateful !
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
03.05.14 11:48:37.000 kernel[0]: 2.300782: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
03.05.14 11:48:37.000 kernel[0]: init
03.05.14 11:48:37.000 kernel[0]: probe
03.05.14 11:48:37.000 kernel[0]: start
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (502 27 1097)
03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
03.05.14 11:48:37.642 kdc[78]: label: default
03.05.14 11:48:37.642 kdc[78]: dbname: od:/Local/Default
03.05.14 11:48:37.642 kdc[78]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:37.642 kdc[78]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
03.05.14 11:48:43.092 configd[56]: network changed.
03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
03.05.14 11:48:46.813 digest-service[67]: label: default
03.05.14 11:48:46.813 digest-service[67]: dbname: od:/Local/Default
03.05.14 11:48:46.813 digest-service[67]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:46.814 digest-service[67]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
03.05.14 11:48:50.554 configd[56]: network changed: DNS*
03.05.14 11:48:50.556 configd[56]: network changed: DNS*
03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
03.05.14 11:48:50.561 mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
03.05.14 11:48:51.199 kdc[78]: KDC started
03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume. destroying old logs. (157 8 1095)
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume. destroying old logs. (155 10 1095)
03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
03.05.14 11:51:07.187 distnoted[172]: # distnote server agent absolute time: 177.064182367 civil time: Sat May 3 11:51:07 2014 pid: 172 uid: 502 root: no
03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
I am posting the latest system log (on this one, I forgot to unplug the printer)
Please help !!!
May 4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:45 --- last message repeated 6 times ---
May 4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
May 4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
May 4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
May 4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
May 4 20:38:44 localhost kernel[0]: zone leak detection enabled
May 4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
May 4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
May 4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
May 4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
May 4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
May 4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
May 4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
May 4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
May 4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
May 4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
May 4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
May 4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
May 4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
May 4 20:38:44 localhost kernel[0]: USBF: 1.518 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
May 4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
May 4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
May 4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
May 4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
May 4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
May 4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
May 4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
May 4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
May 4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
May 4 20:38:44 localhost kernel[0]: 2.261691: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
May 4 20:38:44 localhost kernel[0]: USBF: 4.521 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 5.362 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 8.760 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 9.587 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
May 4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
May 4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
May 4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
May 4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
May 4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
May 4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
May 4 20:38:45 localhost distnoted[65]: # distnote server daemon absolute time: 28.917725827 civil time: Sun May 4 20:38:33 2014 pid: 65 uid: 0 root: yes
May 4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
May 4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
May 4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
May 4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
May 4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
May 4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
May 4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
May 4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
May 4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: init
May 4 20:38:49 localhost kernel[0]: probe
May 4 20:38:49 localhost kernel[0]: start
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
May 4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
May 4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: DSMOS has arrived
May 4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
May 4 20:38:51 localhost kdc[79]: label: default
May 4 20:38:51 localhost kdc[79]: dbname: od:/Local/Default
May 4 20:38:51 localhost kdc[79]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:51 localhost kdc[79]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost digest-service[66]: label: default
May 4 20:38:52 localhost digest-service[66]: dbname: od:/Local/Default
May 4 20:38:52 localhost digest-service[66]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:52 localhost digest-service[66]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
May 4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
May 4 20:38:52 localhost configd[55]: network changed.
May 4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
May 4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
May 4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
May 4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
May 4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
May 4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
May 4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
May 4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
May 4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
May 4 20:38:58 --- last message repeated 1 time ---
May 4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
May 4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
May 4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
May 4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
May 4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
May 4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
May 4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
May 4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
May 4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
May 4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
May 4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
May 4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
May 4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
"00-22-41-ce-73-b2",
"7c-d1-c3-bc-ed-9b",
"04-f1-3e-e9-76-f5",
"d4-88-90-f0-2d-96",
"90-27-e4-f2-fd-53"
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
May 4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
May 4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
May 4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
May 4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
May 4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
May 4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
May 4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
May 4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
May 4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
May 4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
May 4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
May 4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
May 4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
May 4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
May 4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
May 4 20:39:43 --- last message repeated 1 time ---
May 4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
May 4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
May 4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load
May 4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load
May 4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
May 4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent absolute time: 252.755084619 civil time: Sun May 4 20:42:17 2014 pid: 161 uid: 502 root: no
May 4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
May 4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent absolute time: 272.385323107 civil time: Sun May 4 20:42:37 2014 pid: 169 uid: 89 root: no
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
May 4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
May 4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0 -
Mac OS drives no longer visible, can only boot windows.
I have 4 internal drives and 1 external drive on my Mac Pro. Three drives are Mac OS, on internal drive is XP, and one is Win 7. At the moment I can only boot from the Windows drives. The Mac drives are not visible from boot camp or at startup holding the option button down. I know the cause, but I dont know how to fix it.
I caused the problem while booted into Win 7. I was trying to install VS2010 beta 2. The program failed to install, and I found out the problem was that the installer was trying to access the Mac disks. I removed the drive numbers from the 3 Mac disks, and the installation worked. After I relettered the disks I was able to see them from Win 7 (not XP).
I assume I somehow messed up bootcamp. I have no idea of how to fix this. I would appreciate any help.We have a BootCamp forum.
Do any of the drives show up in Disk Utility?
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
DALE -
For Those Who Can't Boot After Upgrading To 10.5.6
For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler -
Can't boot after system update: unknown filesystem type
After running a system update, including updating the kernel, I can't boot to the new kernel.
On booting, grub loads the kernel image, runs/loads udev, but then fails to mount the root partition with error:
mount: unknown filesystem type 'ext4'
I have tried reinstalling the 'linux' package via packman several times, also trying the --recursive argument to make sure all my dependencies were there, and after days of googling and tweaking my system, I'm at a loss.
Thank goodness I happened to keep a spare kernel laying around in /boot.
Thanks in advance.
Last edited by jackrabbit (2012-03-22 23:25:28)The OP can read their partition initially though, it's only after udev that they can't.
Also, try adding "rootfstype=ext4" to your grub kernel line. Is your /boot on a separate partition or part of your / partition? -
Can't boot after 10.6.6 update
I see lots of new complaints here about system slowness, apps not working, etc., but after updating my MacBook Pro from 10.6.5 to 10.6.6, I can no longer boot into OS X.
If I do a verbose boot, I see some complaints regarding VMware's vmnet adapter:
vmnet: Invalidating peer info for hub: 0, port: 0
vmnet: VNetUser-IfFree: freeing user If at [mem-address]
... and then it goes no further. I have let this run for over an hour without any progress.
I've also booted the install DVD and repaired permissions and the disk, but that didn't help.
I've also booted via "safe mode" (Shift on boot), which showed an additional progress bar at the bottom of the boot screen for a while and then went back to the spinning progress circle. This too has run for over an hour now.
Don't know what else to try at this point. Of course, I had written a presentation in Keynote that is due in an hour, and this is my only Mac.Sorry ... what?!? I'm not sure from where you made this assumption, but of course I keep data back-ups; and I'm not sure what you classify as a "production machine", but I certainly don't consider a laptop a production system (again: my data is safely backed up).
If you have a presentation due in an hour, which is what your post said, surely you anticipate the ability to access that presentation in an hour, and not be beset by issues resulting from updates, hardware issues, etc, I would classify that as a production machine, because time sensitive access is a necessity. One should not be shooting oneself in the foot by modifying what is working until one is absolutely certain that it won't affect their ability to access time sensitive data. Since you are backed up, the issue presented here, is one of a machine which may need directory repair, or to be cleaned up so it isn't too full that the machine can't boot, or one of not having compatible firmware or drivers with the new operating system. Whichever, a recovery of a backup would allow one to continue as if no update had happened, it would also allow one to recover to another hard drive if the hard drive is dying, it would also allow one if the directory is too badly munged to recover data to another hard drive, but whichever the issue, you have within your power the ability to recover from this situation. To repair the directory I give directions here*:
http://www.macmaps.com/directoryfaq.html
If it can't be repaired, that's when you have to assume the drive may be dying.
If it can be repaired, but won't boot, that's when you assume that some driver was installed that won't work with the new operating system, and you'll have to downgrade.
Whichever the scenario, your backup saves you a lot of trouble.
- * Links to my pages may give me compensation. I merely have to say this whenever posting links to my site. That's just a given because of the terms of this forum. -
Can't boot after installation of Time Machine
Hello there,
I am not sure I am posting on the write forum here but I will try anyway.
I have recently set-up TM to back up my system on a 150 Go partition of an external 250 Go HD that I formated for Mac (it used to be a PC format). All worked fine and I performed my first (and all the subsequent) backup.
Please note that this external HD is constantly connected to my new MB via a USB2 port and is set to auto power (so that it turns ON automatically when my MB is on and connected to the HD - which should be constantly if I did not face the problem that I am facing now).
Now that is where it becomes tricky. Ever since I did that, my system does not boot. I mean that I never get to the grey screen when the Apple logo shows. Even stranger, my external HD starts showing signs of activity, as if my MB were trying to boot from it. If I do nothing, I never get to grey logo screen and never reach the login page and, of course, can never use the computer (I must confess I gave up waiting after 10 minutes, but my system usually boots in 30 to 40 seconds).
After 10 minutes, I switched off my external HD and within 5 seconds, boot sequence resumed normally (i.e. grey screen with Apple logo followed by login page).
So now, I must switch off my external HD, switch on my MB and switch on my external HD when I am logged in....it can't be right.
It all looks very strange to me and I have no idea as to what I should do to stop this from happening (I switched 2 weeks ago to Mac).
Any thoughts anyone ?
Thanks in advance,
JulienJulian,
I'm back. Yes, reformatting/partitioning will remove all data. So move what you need to preserve OFF of the drive. Below is the procedure I use.
*_How Should a Time Machine Hard Disk be Prepared?_*
For Time Machine to work properly, the hard disk must be formatted “Mac OS Extended (Journaled)” and its’ Partition Scheme should be either GUID or Apple Partition Map.
Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
For some, Time Machine begins to perform as expected with a new external hard disk. But then the initial full backup or subsequent incremental backups fail. The user only later discovers the hard disk was still partitioned as Master Boot Record (MBR).
One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” [http://www.girr.org/mac_stuff/backups.html]
It’s been recommended by many here that your reserve +at least+ double the size of your primary hard disk, that way Time Machine backups have room to grow as the size of your data grows. Additionally, the more space you give Time Machine the more history it can preserve. The less space you reserve for Time Machine the sooner older backups & deleted items will disappear.
One poster recommended this regarding multiple partitions: “If you do create multiple partitions (half and half would be a good place to start), make sure you use the first partition for Time Machine, and the second for your own stuff (the first one will be on top in the graphical representation shown in Disk Utility; you'll understand when you see the partition tab). This way, you can expand the Time Machine volume at any later time by deleting the second partition. Disk Utility allows this dynamic re-sizing of volumes, but volumes can only be expanded toward the end of the drive, when a volume that comes after is deleted to create the room.” [http://discussions.apple.com/thread.jspa?threadID=1712437&tstart=0]
Procedure
Connect the hard disk you wish to use for Time Machine backups.
Launch Disk Utility.
It will appear twice in the pane on the left. (Make sure you recognize that it is different from the 2 icons that represent your Macs' internal drive.) The upper entry represent the device as a whole, including the controller inside. The lower entry represents the hard disk contained within the device.
Click on the upper icon of the external hard disk.
Select the "Partition" tab.
For "Volume Scheme" choose "1 partition". (Choose 2 partitions if you intend on storing other data on the disk besides your Time Machine backups. Ensure that the two partitions have different names.)
Name the disk.
Format should be "Mac OS Extended (Journaled)".
Click "Options".
Select either GUID or Apple Partition Map. (See above for significance)
Click "OK".
Click "Apply". Then click “Partition”.
Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups. If you chose to create 2 partitions, then select the first partition for Time Machine backups, and the second for additional files/folders.
Let us know if this was helpful.
CHeers! -
Mac Book Pro 2.13 17" can only boot up in Safe Mode
I have a 4+ year old Mac Book Pro 2.13 Intel Core 2 Duo 17" and it's primarily been used for heavy graphics usage it's entire life. (Adobe CS Suite etc). A few weeks ago I was watching a video, Hulu, and the entire screen froze. Since it was none responsive I force powered off. waited a few and restarted. I got to the Grey screen, Apple logo, and after 30 sec the screen went to all grey and no further. Tried it several times, powering off, removing battery, resetting PRAM, all to the same result.
Things that DO work:
Can boot in Target Disk mode and mount the disk on another computer. Ran Disk utility and all check out.
Can boot in Safe mode but screen shows some video artifacts. Light red squares all over the screen.
Can option boot to choose a disk although see the same result as above description.
Things That DONT work:
Booting from CD fails at same location as OS boot
Booting using Hardware Check Disk
I haven't visited an apple store yet for this issue since I'm hoping to repair myself once I narrow down the problem.
I'm guessing it's the power supply but not sure. It does get hot so guessing something is wonky.
Any thoughts?
ThanksBeen reading a little and the Mac Book Pro may not have a power supply in the traditional sense so it may not be replaceable. Hmm
-
Can't boot after update, getting "microcode: failed to load" error
After restarting my computer, it's no longer able to boot, and just prints a continuous stream of errors. The first error it gives is "microcode: failed to load", and I looked it up and found that I should just have to install amd-ucode. Easy enough, except I can't boot. I tried booting into the latest live-usb image, and after connecting to the internet, mounting the partition to /mnt, and running
# arch-chroot /mnt pacman -S amd-ucode
I get the following error
error: amd-ucode: signature from "Allan McRae <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I'm not very familiar with how chrooting works, especially not arch-chroot, so I don't trust myself to fix the problem without breaking something. I was thinking of just putting the package on a flashdrive and installing it with
# arch-chroot /mnt pacman -U amd-ucode-package-name
Should I do it this way or am I misunderstanding how arch-chroot works?
By the way, this is an issue with my desktop. startx stopped working on my laptop right before I went to use my desktop and rebooted it, so after this issue is fixed I'll be making another thread about my laptop >_> Any help is much appreciated.Ok, so I managed to install amd-ucode with pacstrap. That got rid of the microcode error, but I'm still getting
/dev/sdc1 contains a filesystem with errors. Forcing check
And then it just repeats the error message
[60.50342] ata5.00: failed command: READ FPDMA QUEUED
[60.51345] ata5.00: cmd 60/<long number that's formatted similarly to a MAC address>/40 tag 0 ncq 131072 in
[60.51743] res 40/<the same number>/40 Emask 0x10 (ATA bus error)
[60.62421] ata5.00: status: { DRDY }
The numbers on the left just keep counting up, but the repeating error message stays mostly the same. What's odd about this error is that the disc it says it has a problem with isn't even the disc with the OS on it. When I have time I'm going to try physically removing /dev/sdc from my computer to see if the error stops.
Oh and there won't be any thread about my laptop issues. Turns out I filled my whole HDD, which was causing startx to fail. -
Resized partition, now can only boot using option key
I made my boot camp partition larger and my os x partition smaller using a 3rd party program. I can still boot into windows, but only using the option key. When I look at my startup disks in OS X, only my OSX partition shows up. Is there any way to make snow leopard recognize this resized partition? Thanks!
Hi,
I am not familiar with that program but since it is a Windows program I doubt that it has installed anything in OSX.
Most likely that program wasn't even "aware" that it was used on a Mac running WIndows.
And it also might be that that is the reason for your problem.
To run Windows with BootCamp on a Mac OSX has to establish/use a form of hybrid GPT/MBR partitioning.
GPT for OSX and MBR for Windows.
That also means that using any kind pof partitioning tool (resizing etc.) would have to be done best in OSX since only OSX "knows" that there is a Windows partition and can handle the hybrid partitioning accordingly.
First thing I would propose (if not already there) is a backup / clone of your OSX onto an external HD.
Secondly boot your Mac from the OSX DVD and use Disk Utility from it to verify/repair your OSX.
Regards
Stefan -
[SOLVED] Can not boot after mishap with clonezilla
Hi
I was trying to back up my computer with Clonezilla. It kept telling me that the drive I was trying to back up (the only hard drive in my laptop and only has Arch Linux installed on it) had a GPT and MBR partition table. I thought that this was odd so booted back into Arch Linux and loaded up gparted and it said that the drive was MBR. So I ran clonezilla again and it said about a command to run to remove the GPT if you are sure that you are using MBR so I went ahead (stupidly) and ran it thinking that everything would be ok and now I can not boot back into my Arch Linux. I just get a black screen with GRUB and a flashing cursor. I think the command that I ran was either:
gdisk -z /dev/sda
or
sdisk -z /dev/sda
I'm not too sure and I should have written it down or researched it first. (That will teach me.) I have booted the computer from a Knoppix DVD and can see all the partitions on the drive (root, swap and home) and also read all the data. I have tried to reinstall grub (install-grub /dev/sda deom the Arch install cd) but this has not worked. I hope that as will most things Linux I can fix this. Please can you point me in direction I need to go to fix this?
Thanks
Robert
Last edited by toca180 (2012-02-25 17:20:11)Hi
I have fixed it. I ran testdisk from Knoppix and let it write out the partition table again as MBR then reinstalled grub from the Arch Linux install CD by doing the following from with in grub:
root (hd0,0)
setup (hd0)
Lesson learnt. I'll read and research before just blindly running commands again. Thank you all for reading.
Thanks
Robert -
Can't Boot After New HD + Time Machine Restore
So a couple days ago my 27" iMac running Snow Leopard started making some weird noises and stalling out. Annoyed, I talked for a couple hours with apple tech support which eventually lead me to run an Apple Hardware Test. This test returned the error
"Alert! Apple Hardware Test has detected an error.
4HDD/11/40000000 SATA(0,0)"
I scheduled an appointment at the Genius Bar, and they replaced the hard drive.
After that I got it home and did a System restore from my time machine backup. It finished fine, but when I restarted it got stuck on the grey apple screen with the spinning dial thing.
I called apple back and they had me do a couple things like repair disk, verify disk, and one person had me reboot into this command line mode and type some stuff in. Nothing worked. After that They had me try to reinstall the OS first from archive, and next by erasing the hard drive and doing it. Both times the install fails with a big yellow exclamation point saying that it couldn't install support files and the OS couldn't be installed.
Any ideas how to fix this?
I'm currently trying to restore from my time machine backup again, but I'm not hopeful.Here's what I got - apologies for any formatting peculiarities.
The problem: 10.6.6 mac won't boot after time machine restore to disk.
Further symptoms: Booting with Command-v shows several errors: usually blued and loginwindow collapse with errors from launchd. Errors will be of the style "dyld: Symbol not found: CSSMOID_APPLE_TP_MACAPPSTORERECEIPT" and other CommerceKit / CommerceCore framework errors.
A solution: Your Framework Security library may be an older version (possible cause with Time Machine below). The easiest way to fix this is to find another, working 10.6.6 Mac, and update the Security library on the broken machine.
Identifying if you're affected:
1) Boot the broken machine into "target" mode - hold "Command-t" during boot until the [Firewire|http://itunesu.utah.edu/terms/images/Firewire_Icon.png] icon appears.
2) Connect the broken machine to the working 10.6.6 machine with a firewire cable.
3) On the working machine, the disk of the broken machine should mount.
4) Open Terminal
5) Run "ls /Volumes" - the name of disk you mounted should be there (in this example, we'll use "Macintosh HD".)
6) Typing in the path of the broken machine, run:
<pre>
nm /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
(this does a dump of the library, looking for the version value)
If this comes back with the value 22457 (or less?), your Mac is not booting because it does not have the updated version of the Security library, which is required in 10.6.6 since Snow Leopard added the Appstore / Commerce framework.
Fixing if you're affected:
1) First, make sure the working 10.6.6 Mac has a correct version of the framework:
<pre>
nm /System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
For 10.6.6, this should be at least "22458"
2) *Be extremely careful at this point* - Make sure on the mounted disk (not the machine you are working on!) run the following
<pre></pre>
2a) Make a backup of the broken library
<pre>
mkdir /Volumes/Macintosh HD/savedLibrary
cp /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/savedLibrary
</pre>
2b) Copy the working version over the non-working version:
<pre>
cp /System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security
</pre>
3) Eject the mounted disk from the working Mac, disconnect the firewire cable, and reboot the "broken" Mac. It should come up.
If it doesn't, you have problem(s) that are probably outside the scope of this. I'd also suggest restoring your original security library that you saved off.
Suspected cause:
It appears that Time Machine never recorded the change to the Security library after the update. If the library hadn't changed, the machine should have failed to boot like it did after restore the moment a 10.6.6 update was applied.
Inspecting the contents of my Time Machine backups before and after updating shows that Time Machine never updated the Security Framework library - why is still not 100% determined, but restoring from it is definitely broken. Combing through the backup databases on my Time Machine disk:
(I upgraded to 10.6.6 on January 6)
<pre>
for name in 2010-12-30-093337 2011*
do
echo -n "In backup on ${name}, version of Security library is: "
nm "${name}/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security" | grep random_fd | cut -d. -f2
done
</pre>
In backup on 2010-12-30-093337, version of Security library is: 22457
In backup on 2011-01-04-100707, version of Security library is: 22457
In backup on 2011-01-05-082402, version of Security library is: 22457
In backup on 2011-01-06-092846, version of Security library is: 22457
In backup on 2011-01-07-094827, version of Security library is: 22457
In backup on 2011-01-10-093559, version of Security library is: 22457
In backup on 2011-01-11-110542, version of Security library is: 22457
In backup on 2011-01-12-094137, version of Security library is: 22457
In backup on 2011-01-13-103238, version of Security library is: 22457
In backup on 2011-01-14-113145, version of Security library is: 22457
In backup on 2011-01-18-112856, version of Security library is: 22457
In backup on 2011-01-20-114953, version of Security library is: 22457
In backup on 2011-01-21-103642, version of Security library is: 22457
In backup on 2011-01-24-102321, version of Security library is: 22457
In backup on 2011-01-27-002508, version of Security library is: 22457
In backup on 2011-01-27-011931, version of Security library is: 22457
In backup on 2011-01-27-104406, version of Security library is: 22457
In backup on 2011-01-27-114322, version of Security library is: 22457
In backup on 2011-01-27-123928, version of Security library is: 22457
In backup on 2011-01-27-134523, version of Security library is: 22457 -
Can't boot after glibc update (even after a fresh netinstall)
My main system no longer booted after doing a pacman -Syu yesterday, following the instructions at https://www.archlinux.org/news/the-lib- … a-symlink/ .
I booted a livecd, rsynced my /home to a storage drive and did a netinstall today. The system still doesn't boot.
The screen goes black after "waiting for udev uevents to be processed" appears, together with expected microcode errors.
I booted the system with a livecd again and mounted /dev/sda3. /var/log is empty, except for a pacman.log from the install, containing no errors.
Photo from just before the screen goes blank: https://goput.it/9id.jpg
inxi -v7 output from sometime before this happened: https://goput.it/rmh.png
Last edited by ne (2012-07-15 12:43:58)Adding nomodeset to the grub kernel line made it boot fine, so I've narrowed it down to a framebuffer issue.
-
Macbook Pro, Can't boot after EFI update....
Updated the EFI this morning- Prior to that update, everything was working fine. After the update, I have the flashing question mark folder of doom. Can't use internet recovery even while plugged into ethernet. What happened? Everything was going so well Apple! I'm on Lion, latest updates, 2011 MBP 2.2 i7, SSD 120g with a 750g running beside it (data doubler).
Okay, so the disk is supposed to show up as disk0s2.
Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
I think next I'm going to try swapping out the new HD in my MacBook Pro with the one it originally came with. -
LILO can't boot after recent update
After updating today, I cannot boot any longer. My root is on lvm and I also use LILO.
I've tried the suggestions to boot from live cd and run mkinitcpio without any success. I've also tried reinstalling udev and mkinitcpio with pacman from a live cd and that did not work either.
When I boot, I see the following messages:
:: Running hook [udev]
:: Triggering uevents...done
:: Running Hook [lvm2]
Activating logical volumes...
2 logical volume(s) in volume group "vg1" now active
Creating device node with major 254 and minor 3.
:: mounting '/dev/root' on real root
mount: you must specify the filesystem type
You are being dropped into an emergency shell
sh: can't access tty: job control turned off
[edit] changed title to reflect what I discovered to be the underlying problem: LILO
Last edited by despotic (2012-05-07 02:42:31)Yes, I can manually mount the lvm partitions in the recovery shell.
Here is my lilo.conf: http://pastebin.com/w0L1kgqv
Here is my fstab: http://pastebin.com/eyvfnYpC
Also, when i try to update udev or linux or device-mapper with pacman, I get the following warnings:
warning: could not get filesystem information for /bootmnt: No such file or directory
warning: could not get filesystem information for /cowspace: No such file or directory
warning: could not get filesystem information for /sfs/root-image: No such file or directory
warning: could not get filesystem information for /sfs/lib-modules: No such file or directory
warning: could not get filesystem information for /sfs/usr-share: No such file or directory
warning: could not get filesystem information for /repo/core/x86_64: No such file or directory
warning: could not get filesystem information for /repo/core/any: No such file or directory
warning: could not get filesystem information for /bootmnt: No such file or directory
Thanks for your help!
[edit] for anyone looking at this post trying to resolve the above warnings, don't. They don't seem to cause problems and as far as I know they show only during a chroot environment within a live boot, so don't worry about them. If you experience issues, it's most likely related to something else, my particular issue was actually with the LILO boot loader and not related to these warnings at all.
Last edited by despotic (2012-05-07 02:33:05)
Maybe you are looking for
-
I have contacted Apple Support because I am locked out of my iPhone. They e-mailed me instructions on how to restore all my settings to their original settings. The problem, however, is that iTunes is telling me I need to unlock my phone before iTune
-
Personnel number in sales customer master records
Hi my users want to add an ID number in the customer master data, currently they are using one of the name line to enter ID number. It is possible to add a personnel number for a customer? because i heard someone say you can link a personnel number
-
Unable to download or update apps from mac store
I am unable to download ANY apps from mac store. It was working just fine but some two weeks ago mac store stopped updating and downloading apps. i tried clearing the temp folder, deleted the appstore temp files. But still i am getting the error. My
-
How to Fix quality issues with video in Premiere Elements?
I am uning Premiere Elements 10 on a HP computer with sufficient RAM and an i5 processor. When I upload footage from my Canon Vixia HF r20, it looks fine using Windows media player to play it back, but after putting it into premiere elements 10 usin
-
BOE-Hydis sRGB (13N7194) monitor color profile?
Hello all, Does anyone know what monitor profile should be used for the sRGB BOE-Hydis LCDs? I'm having a hard time getting it to look right with the ordinary Flexview color profile found in http://www-307.ibm.com/pc/support/site.wss/document.do?site