Workaround for using the latest nightly SDK 4.0 builds with Flash Builder Beta 2

The latest builds of SDK 4.0 have been updated in preparation for including playerglobal.swc for Flash Player 10.1. Flash Builder Beta 2 can not find playerglobal.swc due to the addition of the {targetPlayerMinorVersion} variable found in the flex-config.xml file.
When using recent nightly SDKs with Flash Builder Beta 2, please modify them as follows:
1) Rename the folder <nightly sdk location>/frameworks/libs/player/10.0 to "10"
2) Edit the file <nightly sdk location>/frameworks/flex-config.xml and remove ".{targetPlayerMinorVersion}" and save
When you restart Flash Builder, we will now find a correct location for playerglobal.swc, allowing for code hints and many other features to work properly.
Jason San Jose
Quality Engineer, Flash Builder

Bump.
As people continue to have problems with the nightly SDK 4 builds and Flash Builder Beta 2, please remember to use the workaround described at the top of this thread. Also see http://blogs.adobe.com/jasonsj/2010/02/workaround_for_using_the_latest_nightly_sdk_40_buil ds_with_flash_builder_beta_2.html.
Jason San Jose
Quality Engineer, Flash Builder

Similar Messages

Latest nightly sdk causes Java Heap error during build

The latest nightly sdk 4.0.0.13210 causes out of memory error in Flash Builder during a clean build. However the prior nightly build (4.0.0.13175) works fine. I'm using build 262635 of Flash Builder. What changed in the latest nightly that could cause this problem. I have over 10 modules associated with this project. Here is details of the error that Flash Builder reports:
An internal error occured during: "Build Project"
An internal error occurred during: "Build Project".
Java heap space

Here is the stack trace:
!ENTRY org.eclipse.core.jobs 4 2 2009-12-28 13:41:13.743
!MESSAGE An internal error occurred during: "Build Project".
!STACK 0
java.lang.OutOfMemoryError: Java heap space
    at flash.swf.builder.tags.DefineBitsLosslessBuilder.build(DefineBitsLosslessBuilder.java:33)
    at flex2.compiler.media.LosslessImageTranscoder.getImage(LosslessImageTranscoder.java:127)
    at flex2.compiler.media.ImageTranscoder.doTranscode(ImageTranscoder.java:67)
    at flex2.compiler.media.AbstractTranscoder.transcode(AbstractTranscoder.java:119)
    at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:221)
    at flex2.compiler.as3.EmbedUtil.transcode(EmbedUtil.java:103)
    at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:360)
    at flex2.compiler.as3.EmbedEvaluator.generateSources(EmbedEvaluator.java:338)
    at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:98)
    at macromedia.asc.parser.ClassDefinitionNode.evaluate(ClassDefinitionNode.java:106)
    at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:349)
    at macromedia.asc.parser.StatementListNode.evaluate(StatementListNode.java:60)
    at flash.swf.tools.as3.EvaluatorAdapter.evaluate(EvaluatorAdapter.java:934)
    at flex2.compiler.as3.EmbedEvaluator.evaluate(EmbedEvaluator.java:320)
    at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80)
    at flex2.compiler.as3.EmbedExtension.parse2(EmbedExtension.java:70)
    at flex2.compiler.as3.As3Compiler.parse2(As3Compiler.java:438)
    at flex2.compiler.mxml.ImplementationCompiler.parse2(ImplementationCompiler.java:280)
    at flex2.compiler.mxml.MxmlCompiler.parse2(MxmlCompiler.java:196)
    at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2935)
    at flex2.compiler.CompilerAPI.parse2(CompilerAPI.java:2892)
    at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:460)
    at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274)
    at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496)
    at flex2.tools.oem.Application.compile(Application.java:1184)
    at flex2.tools.oem.Application.recompile(Application.java:1129)
    at flex2.tools.oem.Application.compile(Application.java:818)
    at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ModuleBuilder.build(ModuleBuilder.java:1 34)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
    at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)

Flash in the latest nightly build is not working and causing crashes. Help?

I'm using an Asus Transformer tf101. I updated Nightly today and now flash does not work in the program. Once I attempt to play any flash video, the program crashes and it crashes one or two more times after that before I can use it again. I disabled all my plugins and cold booted but to no avail.
Another issue I am having is that it sometimes freezes on the home screen on startup. This instance usually happens after I try to type an address or use a bookmark. The only way I found around it was to tap one of the three top site icons first. Does anyone have a solution to this?
edit: I have reverted back to the previous build for now. It isn't as nice as the latest version's style but it plays flash video better than the other mobile browsers out there. Controls like pausing, skipping ahead or putting video to full screen are still hit or miss though.

It is a known issue with the current Nightly builds. We hope to have it sorted out early next week. I don't believe the Aurora builds are affected by this issue. http://www.mozilla.org/en-US/mobile/aurora/

Using CS SDK 2.0 with Flash Builder 4.7

Using the following components:
Mac OS 10.8.2
Flash Builder 4.7
CS SDK 2.0
CS6 InDesign (8.0.1)
Followed instructions in CS SDK 2.0/CS_SDK_Guide.pdf to build a basic extension for InDesign.
Double checked by re-doing instructions. Double checked all version numbers etc making sure everything tallys.
Launched FB followed by InDesign.
Get this error in the FB Debugger:
Main Thread (Suspended: VerifyError: Error #1079: Native methods are not allowed in loaded code.)
PlayerDebugMode 1
LogLevel 6
No errors in:
~/Library/Logs/CSXS/csxs3-IDSN.log
~/Library/Preferences/Macromedia/Flash Player/Logs/flashlog.txt

Ok, thanks for quick response.
I switched to 4.7 because I've just rebuilt my dev machine.
I hopefully still have my 4.5 installer somewhere! unless there are some links out there.

??? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? I thought that adobe is a top product that uses the latest technology? Am I wrong???? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? ...

??? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? I thought that adobe is a top product that uses the latest technology? Am I wrong?
I want to develop a plugin for adobe acrobat 9+10+11 do I need “SDK 9.1 and Visual studio 2005” +“SDK 10 and Visual studio 2008” +“SDK 11 and Visual studio 2010”
Can’t I develop this plugin with visual studio 2013?

The SDK is produced when the version of Acrobat is released, so if you insist on using obsolete SDKs for obsolete Acrobat you can hardly criticise the Acrobat 9 SDK for being out of date.
To develop for Acrobat 9 (obsolete)+10+11 you can use the Acrobat 9 SDK but it may require some work and expertise to get it to work in all versions. Get the other SDKs for reference.

IPhoto is appearing as free on MAC store and it is also featured as one of the top 10 free apps, when i downloaded it, my credit card got charged for 790 rupees. I am using the latest OSX Maverick

iPhoto is appearing as free on MAC store and it is also featured as one of the top 10 free apps, when i downloaded it, my credit card got charged for 790 rupees. I am using the latest OSX Maverick.

And yet to download the app you clicked on a button that told you that the app would be 790 rupees for you.
The iLife apps and the iWork apps are only free when you qualify to get them free. And when you get them free the buy button to download them says free. When the buy button has a price on it, that is how much you will pay for the app.

I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor. Where can I find out?

I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor. Where can I find out?

john howkins wrote:
Thanks, but the website says I need a 32 bit processor so presumably a 64 bit processor is no good? Or can a 64 bit automatically do everything a 32 bit one can do?
Where is the link that says you need a 32 bit processor? On my MBA, in the past I've ran both Office for Mac and Windows 7 (MS Office) via Parallels (Bootcamp does the same thing). I chose installing Windows 7 in the 32 bit mode ONLY because I have a couple of other legacy Windows programs that only run in 32 bit mode.

Iphone 4 sync issue - My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

Making system to use the latest Infotype Record for the Current Period

Hello,
I would like to know how the system behave if there is a record modified in the middle of the Pay Period, which record would the PY schema use? Ex: in IT0009 EE has selected multiple Bank Transfer. He say 100$ Bank 1 and Rest to Bank 2. In the middle if the Pay period, the EE comes and makes changes to his Bank Transfer, as he closed the account in Bank1, he creates new Bank and transfers 100$. Now when the PY run, it think both Banks (Bank1 prev and Bank 1 current ) are valid and tries to send 100$ to each back and sends rest to Bank2. Which is not correct. This issue happens when someone changes their record in the middle of the period. So It is assumed to change the process to not to change in the middle of the period. It has to be effecting of 1st of next period.
But I want to check is there anyway we can make the system to use the latest one if it finds multiple record for the same period?
any suggestion please.
Thank you.
Raj

Hi Donnie,
This system actually delimits the previous record but since the change is happened in the middle of the period, but record are considered as active.
For Ex: The Pay Period is 01/01/2009 to 01/15/2009 and There was a record for Bank1 for that period and user comes and creates a new record on 01/05/2009 for Bank1. Now for this payperiod since its with the period both records are becoming active. So system uses both the records and deducts. Hope you get what I'm saying.
Thanks,
Raj

When I go to open Yahoo mail it tells me I should upgrade to the latest version of Safari. When I check for upgrades through Apple it says I am using the latest version. What am I not getting here?

When I go to Yahoo mail it tells me I should upgrade to the latest version of Safari. When I go to apple to do the upgrade it says I am using the latest version.
What am I missing here?

You can avoid using web based email for Yahoo.
Open Mac Mail. From the menu bar click Mail > Preferences > Accounts > Account Information
Then click + to add your Yahoo account.

How do you delete photo's and also how do you search in your phone for apps/anything using the latest software

how do you delete photo's and also how do you search your phonefor apps / anything ???
i am using the latest software update
many thanx to all in advance

Anywhere on a home page swipe down (not from the very top or you'll get the Notification Center) to launch Spotlight.

Problems with mobile projects with apache flex 4.8 and an overlay of the latest air sdk

Using flash builder 4.7 beta, apache flex 4.8 and an overlay of the latest air sdk, i got resolution problems while testing the mobile app (windows version on windows 7) with the air (ipad)emulator. That means the emulator is much bigger than my screen (logicaly seen the resolution of my screen and also like this in earlier version), but the app is much smaller than the emulator. As I have no design view with apache flex 4.8, I don't know where to start searching. Can anyone give me some input?
Gert

Hi Crill,
I don't see any error on creating new projects and running the same.
Where did you get the installer from?
What is the framework linkage type? You can check this in project properties -> flex build path. It should be Merged into code for Apache SDK.
thanks,
Sudhir

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

I try to open iphoto and it comes up with You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto. I have downloaded photo manager and it's telling me to update but it wont update...

iPhoto is Apple's included program to manage your photo's and pictures.
It receives updates over time with Software updates and new machine or iLife purchases.
When iPhoto gets updated or a newer version is used, it may alter iPhoto support files, but newer iPhoto versions usually always compatible with older files which it then updates.
If you used a newer iPhoto on your iPhoto support files, then they got altered to the newer format, older iPhoto versions can't read the older format.
Somewhere along the line you somehow got a older version of iPhoto on your computer, you need to fine the newer version of iPhoto (not this photo manager, sounds like another program)
Or somewhere along the line you used a newer iPhoto version (like on another Mac) and it altered the iPhoto support files on your older version of iPhoto.
So the key here is to find the newest version of iPhoto and use that to access your iPhoto support files.
If you didn't access your iPhoto support files from another Mac, then you should have the newer iPhoto version on your computer.
Once you find it, and get it in the Dock, you should remove the older iPhoto version from your computer to prevent this from happening again.
Lastly, if the newer version of iPhoto is somehow gone off your computer, you should be able to get a copy off the latest OS X install disk or iLife using a free program called Pacifist.
http://www.charlessoft.com/
Then you need to check for updates for iPhoto in the program itself, the current version is 9.1.2

Problem with HowTo guide - Use the BI Java SDK in a Web Dynpro Application

Hello,
I am following the HowTo guide - Use the BI Java SDK in a Web Dynpro Application
at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f">this link</a>.
I have configured the connector on the WAS as needed.
The problem is that when I run the application I receive an Unauthorized error on the connector URL.
If I open this URL on a browser I receive a pop-up for UID and PWD and when I enter the same UID and PWD I used to configure the connector I am able to login and see the WSDL.
Any ideas?

I've never tried using BI in WebDynpro !!!
But i foond one posting on the connection problem https://forums.sdn.sap.com/click.jspa?searchID=955524&messageID=2133396
Regards,Anilkumar

I have a big problem :( why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help :( i want to update it now

i have a big problem why is it i cant update my ipod touch 2g into ios 4! im using the latest version of itunes and everytime i click "update" it stucks on the "contacting server" please help i want to update it now

Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Workaround for using the latest nightly SDK 4.0 builds with Flash Builder Beta 2

Similar Messages

Maybe you are looking for