Worked with PP,MM,SD,QM, PS, but no experience with FICO, GL

Hi,
I worked with PP,MM,SD,QM, PS modules. But I didn't work with FICO, GL, AR, AP. Are these similar to SD/MM modules or any special configurations required while designing Cubes and ODS's?
Thanks,
Ranjani

For FI and CO extractors, no special steps. Nothing like Lo extractors.
Two exceptions to this; for COPA and Special ledger, there wont be any business content extractors; you need to define your own.
Ravi Thothadri

Similar Messages

I have an hd movie on both my ipad and iPhone 5, using airplay with my iPhone 5 plays perfectly but gets stuck with my ipad 2, almost like its buffering? I just want it to play smoothly like with my iPhone. Any suggestion?

I have an hd movie on both my ipad and iPhone 5, using airplay on my apple tv with my iPhone 5 plays perfectly but gets stuck with my ipad 2, almost like its buffering? I just want it to play smoothly like with my iPhone. Any suggestion?

About 6 months ago I discovered iTunes was set by default to 720p. These MUST BE CHANGED TO 1080P!!!!!!!!.......So I installed FULL 1080P file on my laptop on iTunes... When I download movies on iPhone 5s/iPad mini the file is 720p So within about 60 seconds of starting download of 1080p files into my laptop of iTunes purchases. It was at that moment that I realized it was that file my laptop has on file to sync to my Apple device...Ten minutes later when the first 1080P HD file was downloaded I must say... The resolution is amazing... I now use this same process to install movie files from iTunes.. In FULL 1080P.. Not 720P... Works on my iPad mini also... Avatar is 5.4 GB if installed over Wi-Fi... However sync with laptop and file is 6.5 GB in size... Called Apple told them... No reply yet.... You must delete 720P files from your laptop... Look for file size in any movie purchase and you will see DOWNLOAD IN 1080P.. This will open preferences in iTunes for you to the correct tab so you can change setting to 1080p from default of 720p... DELETE any downloaded movies already downloaded into laptop... You can check file quality by right click on any movie folder and the look at movie info... Will say 720p HD... Delete to recycle bin and iCloud will appear on each movie... Now download 1080P HD file... When completed. Right click any file to verify it is 1080P HD... The sync with device...... And get ready to be upset with Apple for holding back your device for the last 2 years 3 months and 16 days......And be ready to catch your jaw from hitting the floor when you see your screen in full 1080P HD.... Apple Engineer's were asleep.....
You will notice better pic quality... Apple by default is still sending the 720P file to the new iPhone 6 plus over wifi and sync.. howve this process above will give you full HD file for your Apple device...

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

I can not update or restore any ios device with my iTunes in my macbook but I can with my pc, why?

IPad2 OS5 with Android 2.3 hotspot fails, but iPad2 OS4 with Android 2.3 hotspot works - why?.

Has the abilityy to link to a hotspot been disabled in OS5?
I get a message that the iPad2 (OS5.0.1) is paired with my Android (LG-P500) phone BUT is not connected. I can see the Android's WiFi name in the iPads list of possible networks and can connect to it with a password.
I also have an ipad-2 with OS4.3.3 which connects properly and gives no trouble.
Any work around is welcome - I suppose I could doowngrade again.

Downgrade is not a solution. If your pad cannot connect to the Internet via the hotspot, then it has not successfully grabbed the hotspot. Keep trying. The pass word or some other issue is causing the problem.

Hi, I have updated my MacPro, Iphone and Ipad and installed the Icloud. My Ipod merges with the Ipad and visa versa but neither merges with the notebook nor does the notebook merge with them.

I have updated my MacBook Pro, my Iphone 4 and my Ipad2. My Iphone merges with the Ipad via ICloud and visa versa, but neither merge with the notebook nor does the notebook merge with them. there are no further updates on my notebook to download, any suggestions?
Maureen

Home Sharing is designed to work on your local network not across the internet/cloud.
Stuff is accessed under the Computers column where your local iTunes library on a local computer would appear.
Home Sharing would share your iTunes content (i.e. stuff stored in itunes on the computer, not in the cloud) with AppleTV or an iPad etc on the SAME network.
AppleTV2 will not be able to see itunes content on the work computer over the internet. It's not designed to. if the work computer was on the home network it would.
iCloud is in it's infancy and is not a mature product - iTunes TV Show purchases appear on AppleTV, but currently music does not unless you are subscribed to iTunes Match. I find this rather odd to be honest, along with the inability to buy music on AppleTV2. Movies purchased in iTunes are not authorised for iCloud viewing currently either.
Maybe it has something to do with iTunes Match 'getting in the way' - i think they assume you'll use that whereas you really want to be able to access Purchased music from the cloud without subscribing to itunes Match which is overkill for some.
AC

Is it Possible to Promote DC on a Subnet With Connectivity to a Site DC But Not DC with FSMO Roles???

I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could.
I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member
to a replication group that's on a subnet without connectivity to the FSMO roles holder. I'll try to describe the
layout as best as I can up front.
The AD only has one domain & both the forest & domain are at 2008R2 function level. We've got two sites defined in
Sites & Services, Site A is an off-site datacenter with one associated subnet & Site B with 6 associated subnets, A-F.
The two sites are connected by a WAN link from a cable provider. Subnets E & F at Site B have no connectivity to Site A
across that WAN, only what's available through the front side of the datacenter through the public Internet. The network
engineering group involved refuses to route that WAN traffic to those two subnets & we've got no recourse against that
decision; so I'm trying to find a way to accomplish this without that if possible.
The FSMO roles holder is located at Site A. I know that I can define a Site C, add Subnets E & F to that site, & then
configure an SMTP site link between Sites A & C, but that only handles AD replication, correct? That still wouldn't allow me, for example,
to enumerate DFS namespaces from subnets E & F, or to add a fileserver on either of those subnets as a member to an existing
DFS replication group, right? Also, root scalability is enabled on all the namespace shares.
Is there a way to accomplish both of these things without transferring the FSMO roles from the original DC at Site A to, say,
the bridgehead DC at Site B?
When the infrastructure was originally setup by a former analyst, the topology was much more simple & everything was left
under the Default First Site & no sites/subnets were setup until fairly recently to resolve authentication issues on
Subnets E & F... I bring this up just to say, the FSMO roles holder has held them throughout the build out & addition of
all sorts of systems & I'm honestly not sure what, if anything, the transfer of those roles will break.
I definitely don't claim to be an expert in any of this, I'll be the first to say that I'm a work-in-progress on this AD design stuff,
I'm all for R'ing the FM, but frankly I'm dragging bottom at this point in finding the right FM. I've been digging around
on Google, forums, & TechNet for the past week or so as this has evolved, but no resolution yet.
On VMs & machines on subnets E & F when I go to DFS Management -> Namespace -> Add Namespaces to Display..., none show up
automatically & when I click Show Namespaces, after a few seconds I get "The namespaces on DOMAIN cannot be enumerated. The
specified domain either does not exist or could not be contacted". If I run a dfsutil /pktinfo, nothing shows except \sysvol
but I can access the domain-based DFS shares through Windows Explorer with the UNC path \\DOMAIN-FQDN\Share-Name then when
I run a dfsutil /pktinfo it shows all the shares that I've accessed so far.
So either I'm doing something wrong, or, for some random large, multinational company, every sunbet & fileserver one wants
to add to a DFS Namespace has to be able to contact the FSMO roles holder? Or, are those ADs broken down with a child domain
for each Site & a FSMO roles holder for that child domain is located in each site?

Hi Matthew,
Unfortunately a lot of the intricacies of DFS leave my head as soon as I’m done with a particular design or troubleshooting situation but from memory, having direct connectivity to the PDC emulator for a particular domain is the key to managing domain based
DFS.
Have a read of this article for the differences between “Optimize for consistency” vs “Optimize for scalability”:
http://technet.microsoft.com/en-us/library/cc737400(v=ws.10).aspx
In brief, I’d say they mean:
In consistency mode the namespace servers always poll the PDCe for the latest and greatest information on the namespaces they are hosting.
In scalability mode the namespace servers should poll the closest DC for information on the namespaces they are hosting.
The key piece of information in that article about scalability mode is: “Updates are still made to the namespace object in Active Directory on the PDC emulator, but namespace servers do not discover those changes until the updated namespace object replicates
(using Active Directory replication) to the closest domain controller for each namespace server.”
I read that as saying you can have a server running DFS-N as long as it has connectivity to a DC but if you want to make changes, do them from a box that has direct connectivity to the PDCe. Then let AD replication float those changes out to your other DCs
where the remote DFS-N server will eventually pick them up. Give it a try and see how you get on.
That being said, you may want to double check that you have configured the most appropriate FSMO role placement in your environment's AD design:
http://technet.microsoft.com/en-us/library/cc754889(v=ws.10).aspx
And a DFS response probably wouldn’t be complete without an AskDS link:
http://blogs.technet.com/b/askds/archive/2012/07/24/common-dfsn-configuration-mistakes-and-oversights.aspx
These links may also help:
http://blogs.technet.com/b/filecab/archive/2012/08/26/dfs-namespace-scalability-considerations.aspx
http://blogs.technet.com/b/josebda/archive/2009/12/30/windows-server-dfs-namespaces-reference.aspx
http://blogs.technet.com/b/josebda/archive/2009/06/26/how-many-dfs-n-namespaces-servers-do-you-need.aspx
I hope this helps,
Mark

Ipad 3 with ios6 can not find airplay mirror to Apple TV 3 , but my another ipad2 with ios7 can do it. But ipad 3 with ios6 can airplay mirror to my friend's apple tv

I have two iPads . One is ipad 3 with ios 6, can not find airplay-Mirror to Apple TV 3 . But it can do it at my friend' s Apple TV.
My another ipad 2 with ios7 can airplay -mirror at my Apple TV 3 .
My ipad 3 64GB already full, so I don't delegate something to upgrade to ios7 .
I am wondering why it can do it at my friend's Apple TV, not mine

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Mac-Pro (Lion) with QuickTime X has normal audio but black screen with WMV files. Re-installed Flip4Mac and installed Perian without success.

duplicate message

Hi Exceldpstudiocc5,
can you please elaborate, which creative cloud app you are using and what kind of file you are trying to open?
I' m assuming, it could be an issue with fonts or type of files.
Regards,
Ashish

PC Used to work with XP and airport Extreme Basestation but not with Vista

Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

With regard to your printer problem - take a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

Anyone got experience with Filemaker and Mac OSX v10.4 on a G5

I am in the transition period from PPC to Intel, and installation of Aperture. My main box is an Apple G5 DP running OSX 10.3.9 and I have the upgrade software to go to OS 10.4+ but have not yet installed it. I also have a recent Intel MacBook Pro running 10.4.9.
Problem I'm experiencing is not unusual. If I run the current OS I cant run Aperture in the G5. If I upgrade the OS I suspect I will 'leave behind' some of the other software I rely on.
My query is about one main piece of software I use - Filemaker Pro 5.5 which runs a database I created handling my analog image collection, client info, deliveries and invoices, accounts etc. It works cleanly and quickly and allows great flexiblity in preparing material for output.
I downloaded the trial of Filemaker Pro 9 and it didn't like my old database when I tried to import it into the Intel laptop, and many functions seemed to have gone awol in the conversion to the newer software.
I cant experiment with this in the G5 as Filemaker is a key management tool in my work and any complications I need to overcome will impact seriously on my work.
So my question is - anyone got any experience with Filemaker in G5's - if I go to OSX10.4 upwards on this non-Intel machine will Filemaker V5.5 still run? And if not, are there any ways around this - eg using Classic environment?

*"I go to OSX10.4 upwards on this non-Intel machine will Filemaker V5.5 still run?"*
Yes

Horrible customer support experience with Nokia

I have just had an extremely frustrating and unsatisfactory experience with Nokia's support / repair operation. Unless I can resolve this, I will put my 820 on Ebay and forget all about Nokia and Windows Phone 8.
I initially called Nokia because my 820 would very occasionally freeze when I tried to unlock it to answer an incoming call. The CSR told me to send it in for repair but refused to answer the question "what happens if you cannot duplicate this intermittent issue?". After asking the question many times, being put on hold and then being told over and over again that Nokia's technicians are "very skilled and can repair it" I was put on with a "supervisor" who told me that Nokia has seen this before and can repair it. She said it was a settings issue but would not tell me WHAT settings.
Even though I was pretty sure this was a software issue (and had called primarily to make Nokia aware of it) I sent it in for repair since it is still under warranty.
After it had been in Nokia's hands for a week, I called to see what was happening. The CSR told me over and over that "it was in our facility for repair". After pressing him many times and being put on hold for a supervisor (at my request) he finally told me (I never reached a supervisor) that Nokia was "deciding whether to repair it or replace it" and that it would be returned shortly.
An equally frustrating and lengthy call the next day revealed after MUCH pressing that Nokia had repaired a "mechanical issue" and would be sending it back.
Just now I got an Email with a tracking number and a copy of the repair paperwork. The paperwork states that it was updated (GDR2 I assume) and tested and found to be working. No mention whatsoever of any repair efforts.
In other words, I was lied to TWICE. Once when I was told that the freezing was a known issue and could be repaired. And then again when I was told that a mechanical issue had been repaired.
Is this truly the kind of customer experience Nokia is comfortable with? Really? This was my first experience with Nokia and with Windows Phone and I am here to say without a shadow of a doubt that it will be my LAST unless Nokia can show me that this was an anomaly.
I am writing this here because I don't see any other way into Nokia other than the "support" phone number...... and that didn't work out very well.
Paul

adrianhughes wrote:
guys, please just persist with your local Nokia Care outlet and have your phones repaired to your satisfaction, there is no point taking out your frustration here as it does not get anyone anywhere.
Where do I find a "local Nokia Care outlet"? The only entry to Nokia support I find is the phone number on their web site. If you read my original post, you will see why I found calling that number that a less than stellar experience..... many times. I / we take our frustration out here because there is NO other place to do it.... Nokia is very well insulated from its customers. Maybe I should open a Facebook account?
Since writing my original post, the phone has arrived and I find I was lied to yet again.... although that "lie" kinda cancels out an earlier one. Contrary to the paperwork which states that the ONLY thing they did to the phone was test it, I find that upon close examination they actually seem to have replaced the screen. I can tell because there were a couple near microscopic nicks in the screen that are now absent.
As for whether that actually resolved my original issue, I cannot tell yet. That may take some time since I am in essence trying to prove a negative.
The repair paperwork includes the statement "Passed, software update". Not sure what that means.... the phone as it came back to me was NOT updated to GDR2 / Amber although those updates were available prior to their receiving the phone. The phone came back to me with the same firmware that was in it when I shipped it and I had to do the GDR2 update myself.
Yes, I needed to vent. Yes, I feel (a little) better. But based on my experience this time around, I will go buy an iPhone before I EVER deal with Nokia "support" again. And I am DEFINITELY not an Apple fan, so take that as an indication of my level of frustration. I actually LIKE the 820 and the concept of Windows Phone.
Paul

MY BAD EXPERIENCE WITH CHAT AND VISION

In my personal e-mail I received publicity inviting me to purchase a Skype credit gift card. I thought it was a nice offer and I happened to have a friend that had the need and could use such a gift. I procedeed to purchase a $10 dollar gift card, I did the transaction from Colombia and sent it to my friend in the US. Shortly after the purchase I received a message warning me that my order was being under security scrutiny. I found it unexpected and unjustified (Is my $10 dollar order a security risk of some sort?), but I thought that maybe it was because it was an international order, and I understand the need for security in online transactions, so I decided to not worry, trusting in the spotless service that I have had from Skype up to that point. At that moment I noticed that the one providing the service was no Skype but Chat And Vision (whose website, by the way, looks far less friendly than Skype's).
Then I received an Email telling me that the order has been rejected. No justification, no explanation. Just a politely worded but most unhelpful and uninformative e-mail. It made a point of telling me that they didn't retain the payment, yet my card was charged and no refund has been made so far. I replied the e-mail asking for a reason, and how to get a refund. I received the automated reply telling me that somebody would contact me the next day. It's been a day and no reply so far.
Searching online I found mine was only one in a long list of blunders and poor service from Chat And Vision. The complains on forums and online outnumber the claims of good service. Mine is a very small case compared to other complains I have read about. It was a small purchase for a smal amount, but it turned into an unexpectedly unpleasant experience for something that should have been a simple purchase ( Am I really such a security risk that I can't be allowed to place an order for a gift card?)
In the end I feel that I was snared into a trap with that offer. I trusted, I paid, didn't receive the goods, haven't yet received the refund, my friend really needed that gift and had to do without, which caused him inconvenience, my high regard from Skype has been tarnished, and I'll hesitate to make new purchases of Skype services in the future, if they keep being powered by Chat And Vision.

Some updates: I received two e-mails from Chat And Vision, regarding my two questions as to why my order was rejected and how to get my money back. These are the answers:
The first one (Ticket ID: PBF-650-80186), says: "Thank you for your email. Firstly, apologies for the inconvenience this may have caused to you. Unfortunately, due to security reasons I am unable to divulge this information. However, should you wish to make another purchase with us again, we will try to process your new order instead".
Polite but uninformative. Notice that beyond an unfocused general apology it does not acknowledge any problem nor does pledge any improvement, just a vague statement that they may allow me to use it's service again if I choose to try (not exactly reasuring).
A second answer to a second e-mail says: (Ticket ID: SVN-701-71147) "Thank you for your email, please be assured the money will be refunded back to you."
That's all. Again polite but no useful information, just a vague assurance of refund, somehow, someday into the indefinite future. If it happens I'll post it here but I'm not holding my breath.
Reading other answers from Chat and Vision posted online here and on other forums dealing with their service, there appears to be a pattern of politeness, vageness, refusal to acknowledge problems and absence of a pledge to improve. Their costumer care seems designed to placate the user without promising to get better, and is so devoid of helpul attitude that it makes me believe that their messages are redacted by a software program, and consumer complains never reach any administrative person. I might be wrong but the doubt has been sown which is a shame. Up until now I was very vocal on my praise for skype, recomending it to family and friends as a very useful and good service, but this experience with Chat and Vision, and my discovery of their costumer service history online, has set me thinking about looking for alternatives to Skype, and certainly has dissuaded me to recomend Skype to anyone ever again,or at least while their sales are still managed by Chat And Vision, or at least while Chat and Vision continues its customer service attitude, polite on the surface but haughty and unhelpful underneath.
If there are new updates I might post them here, but for now I will not pursue the matter further since the amount involved was small and I see no point in sending more e-mails to Chat and Vision. I just feel bitter that the great service that I felt was Skype has ben tarnished by this experience. Just some final thoughts:
I do not complain that my order was scrutinized by security reasons, I understand the risk of illegal activity on online transactions, and the need of online companies to be careful, but the process Chat and Vision used seemed overly unconcerned for the confort of the consumer. It took around a full day for my order to be scrutinized and then rejected, which did let me for a long time in the dark not knowing if my gift would reach the friend I wanted to give it to. This is 2014, does Chat and Vision not have the tecnology to do a better and faster process? Do they scrutinize online orders by hand? I have read more cases similar to mine here on this forum, which to me implies that Chat and Vision are overly and unnecessary zealous on their security procesess. ( Also it is jarring that they seem to consider their clients to be criminals, for no reason at all and with no opportunity to contest the charge.)
If they are going to reject a transaction on security reasons, why not do it before the payment is processed, not after, which can be stressful to the consumer that gave the money and didn't receive what was advertised, for no real reason. Seems to me there is a mistake in the way the system is set, or there is a clear disdain of what the client might think or feel.
I think that's all. Thank you if you went all the way thru this overly long rant. If you are a consummer beware that when you buy services from Skype, you are not buying from Skype but from somebody else and that somebody else does not have a spotless record. If you are an administrative person from Skype or Chat and vision, I hope you eventually prove me wrong about your unconcern for the welfare of the consumer. My experience so far is not encouraging but that may change.
Have a good one.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Worked with PP,MM,SD,QM, PS, but no experience with FICO, GL

Similar Messages

Maybe you are looking for