Workflow not trigered in the MDM:POST Process Material.

Hi Workflow Experts,
            I have copied the standard workflow ws47300003.This workflow is trigeered whenever the material has been changed and send mail to respective user.
           Here i have  a problem that, after changing some data in material master i haven't receive any workitem in my inbox.I assigned the agent in activity step.
          In copied workflow i just assigned  only the agent.Other than this i didn't change anything.
          Am i missed anything to do?Help me on this pl.
Thanks in Advance.

Hi,
I don't know this workflow, but usually if the workflow doesn't start, there are two different possible problems.
1) The workflow is started by an event. Is there any event triggered in the system when you change the material? Check this in event monitor (SWEL) (and make sure that the event monitor is turned on (in SWELS). If there is an event triggered when you change the material, check the link event linkage of your workflow in SWETYPV.
2) The workflow is started directly somwhere in the SAP standard code. If this is the case, you probably need to find some path in IMG to configure the system in a way that it starts your workflow when the material is changed. (It might be even that when you configure everything correctly, there will be an event triggered, then you can check point 1).
Regards,
Karri

Similar Messages

  • Java.lang.AssertionError: WSDL not found in the class file "processes

    Hi,
    I am using WLI 10.3 workshop to build process application. I have designed one JPD which inturn call another process JPD. So i have used worklist process control to create the process and tried to access the process. When i am executing the code, i am getting below error message.
    13-Jun-2011 14:13:00 o'clock BST> <Error> <WLI> <BEA-000000> <Exception processing processes.ISPSSQMsgLisnt
    Java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
    Truncated. see log file for complete stacktrace
    Java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
    --ClassAnnotations:
    --Method Annotations:
    --Field Annotations:
    can't continue
    at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
    at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
    at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
    at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
    at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
    Truncated. see log file for complete stacktrace
    xception processing processes.ISPSSQMsgLisnt
    ava.lang.reflect.InvocationTargetException
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
    at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
    at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:628)
    at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1029)
    at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:950)
    at com.bea.wli.broker.JWSSubscriber.getDispClass(JWSSubscriber.java:231)
    at com.bea.wli.broker.JWSSubscriber.getRequest(JWSSubscriber.java:184)
    at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:358)
    at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:348)
    at com.bea.wli.broker.SubscriptionDispatcher.doDispatch(SubscriptionDispatcher.java:87)
    at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.run(MessageBroker.java:179)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at com.bea.wli.security.authentication.AuthenticationService.runAs(AuthenticationService.java:108)
    at com.bea.wli.broker.MsgBrokerSecurityHelper.doDispatch(MsgBrokerSecurityHelper.java:231)
    at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.doDispatch(MessageBroker.java:165)
    at com.bea.wli.broker.MessageBroker.publishMessage(MessageBroker.java:984)
    at com.bea.wli.mbconnector.jms.JmsConnMDB.publishMBMessage(JmsConnMDB.java:343)
    at com.bea.wli.mbconnector.jms.JmsConnMDB.onMessage(JmsConnMDB.java:475)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
    at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
    at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
    at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    aused by: java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
    --ClassAnnotations:
    --Method Annotations:
    --Field Annotations:
    can't continue
    at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
    at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
    at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
    at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
    at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
    at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispFile.<init>(JwsDispFile.java:24)
    at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:108)
    ... 34 more

    Hi
    Are you using wli process control?
    That uses wsdl and could cause the issue.
    I also saw couple of internal bugs CR264315 and CR288904 on the same issue on 9.2.
    Since this is a wli issue could you post in the wli newsgroup to get more answers http://forums.bea.com/forum.jspa?forumID=2047 ?
    Also you can open a BEA support case at http://support.bea.com and an wli support engineer would help you. Please refer to the Cr numbers above in your support case.
    Thanks
    Vimala

  • Just bought i pad and it will not go through the set up process

    I have just purchased an ipad and it will not go through the set up process. Anyone else had this problem ?

    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • HT201184 i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

    i canot install the new version of adobe flash player so i con not listen to the songs posted on fb

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Workflow is not trigerred from the portal

    Hi all,
    I have a scenario in which the workflow requires to be trigerred through the portal and direct the task to the approver's inbox in extent to sending email notification to the approver, I have developed the custom workflow and i am using the standard rule for getting the approver. all of this is working fine when i test them on R/3 but wheni am integrating the workflow to the portal using a BAPI it is not trigerring the workflow. The first step in my worklflow is to send the email notification  to the approver, if i remove this step then it directs the task to the approver's inbox which is the second step in my workflow.
    Can anyomne please guide me why it is happening.
    Thanks.
    Saurbah Anand.

    Hi,
    You said
    <i>"wheni am integrating the workflow to the portal using a BAPI it is not trigerring the workflow. The first step in my worklflow is to send the email notification to the approver, <b>if i remove this step then it directs the task to the approver's inbox</b> which is the second step in my workflow."</i>
    Do you mean say that it is not working when you put the sendmail step alone? Or is it that the workflow is not triggering at all.
    I assume that you are using a BAPI to create an event which will start this workflow. Now if your workflow is not starting at all then you need to activate the event trace (SWELS) and check whether the event was triggered first (in SWEL). If yes then check for any errors in the receiver connection.
    If your workflow does start and fails at sending mail step then you may need to give some more info. Are you using the standard sendmail step or Are u using a background task. In case if u r using a BG task then it might be creating a dump while triggering from portal (Ex. it might need the Evt_creator user id to determine the approver which is not binded properly from Event<->Workflow<->Task<->Method).
    Also have a look at ST22 for any dumps.
    Thanks,
    Prasath N

  • Workflow not trigerring for BO : ZFIPP ( FIPP )

    Hello Fiends ,
    I have an issue with the Workflow not getting triggered.
    The setup is working fine on development system , but not on test system.
    Have created a custom BO : ZFIPP for FIPP and workflow template for FIPP - create and change event.
    The event linkage has been activated on SWE2 . The workflow template has no issues.  I have tested using SWUE and am able to create a workitem . We are using FM :SWW_WI_CREATE_VIA_EVENT_IBF  to create the event.
    But , When i park a document using FV50 t.code , the workflow does not trigger . Also , I tried testing the BO : ZFIPP with the parked document , Its not able to find the data from the workflow tables.
    Please assist.
    thanks
    Raghu V

    Hi,
    Follow Amandeep Singh's previous post. If EXIT_SAPLF051_002, EXIT_SAPLF051_002 are not raising exceptions, see if the functional configurations under the below path is right. Better to take a functional consultant's help.
    SAP Reference IMG -> Financial Accounting -> Financial Accounting Global Settings ->Tools ->Workflow -> Workflow for document parking
    Verify release from amount and the workflow ID entered in the detail screen of OBWA.
    Regards,
    Krishnakumar PM

  • EHp4 NEw ECM Workflows not trigerring from portal

    CL_HRECM00_WORKFLOW_EVENT This is the class used to trigger the workflow and the workflow templates are
    WS04000022
    WS04000023
    WS04000024
    WS04000025 and these are having only notification steps and wait for events.
    When we do the test Run in R/3 events gets triggered and workflow is running sucessfully but from the portal Event is not trigerring to start the Workflow.
    please guide.
    Thanks,
    Amar

    Hi
    Please provide the steps taken in Portal to reproduce the issue
    I think the problem could be missing configuration in UWL configuration file which is uploaded via
    System Administration -> System Configuration -> Universal Worklist
    and Workflow -> Universal Worklist Administration.                
    I am not sure how UWL team delivers this code for new work items - its possible a CSS message is needed to investigate this
    Thanks
    Stuart

  • Workflows not shown in the front end but exists in LDAP

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

  • Workflow not picking in the agent

    Hi SRM Experts,
    We are doing an SSp implementation on SRM50. Here we are stuck with the workflow for shopping cart approval. We have done all the settings including the event linkage activation and agent determination.
    But here the workflow works fine if we manually assign the agent. otherwise it is not picking up the agent and it shows'Adhoc Agent not found'. What could be the reason for the same. Please suggest.
    Thanks & Best Regards
    Raj

    please check wether the start conditions for the workflow are active
    at the following location
    transaction --> SPRO --> Supplier Relationship Management --->SRM Server ---> Cross Application Basic Settings ---> SAP Business Workflow --> Define conditions for starting workflows.
    which workflow are you using?
    1) one step
    2) two step
    3) N- STep
    >
    Further to the above please check wether the manager has been maintained for the requestor in ppoma_bbp.
    In the case of classic workflows --> managers are determined by the system from org structure.
    Edited by: khan voyalpad usman on Feb 21, 2008 8:39 PM

  • Not taken to the last post...

    When I want to report spam, I use a bookmark that takes me to the first message in the Spam forum. If I click on the "Reply" button of this first message, I get the box for writing my report, but the "last" message above it is #49. not the #282 which is the last at the time of wrinting this:
    When posted, my report appears where it should, but this is annoying. I have observed this for some time now -at least for some weeks- but I had not noticed how annoying it is until Sunday, when I had to post many times there.
    This happens in Firefox/Mac, but I have just checked and it also happens in Safari/Win 7. And it also happens in other long threads: trying to reply to their first message takes me below message #49, not below the last.
    Also, if I click on the Latest Reply button instead, I am at least taken to the last page of the thread, but not to the last message.
    Anyone else?

    Noel Carboni wrote:
    To be honest, I don't get there the way you do, and maybe others don't either.  I make the Discussions tab my default and click on the time in the Last Post column to get to the end directly.
    -Noel
    I think I'm not following you. In your previous thread you said
    I followed your instructions exactly and used the Reply button inside the thread on the first post, and yes, I was taken to the bottom of the first page, just as you describe.
    And this is exactly the problem I am reporting. I haven't said that I get the same effect whatever means I use to try to go to the last message. I do get it when I use a way that I have been using for years: to use a bookmark to go directly to the Spam thread (instead of looking for it in the list of threads, as many times it is necessary to scroll down to get at it), and to click on the Reply button of its first message.
    Incidentally, I get the same problem if I go to the Spam thread by using the link provided at the top of the list of topics in this forums. And yes, I also use the Discussions tab by default.

  • UWL displaying workflow NOT defined in the XML

    Can someone tell me why/how some workflows are displaying in UWL even though the workflows are not defined in the XML file?

    Hi Daniel,
    This is the case for many "legacy" workflows launching SAP(Web)GUI transactions or BSPs.
    It works like this: if the UWL cannot find a corresponding task type for an arriving work item from Business Workflow in its XML configuration, it assigns the task type "uwl.webflow.default". In the standard uwl xml file you can see that tasks of this type are launched using the SAPTransactionLauncher (not specifying the TransactionCode parameter).
    As you can see in the documentation (https://help.sap.com/javadocs/NW04S/SPS09/uw/com/sap/netweaver/bc/uwl/config/doc-files/ActionHandlers.html), if the TransactionCode is empty, the action handler defaults to the Business Workflow transaction "SWK1". This transaction (the UWL is now out of the picture) just redirects to the target transactions defined in the workflow itself.
    Any matching entry in the UWL XML configuration will however override this default behavior.
    Good question though. Hope this clarifies it to some extend...
    Best,
    Matthias

  • IWeb photos color do not match with the same posted on the internet

    Hello,
    my question is about the quality of the images posted by iWeb on the internet.
    Yesterday, I sucessfully published a simple page with two images, and the color of them was faded compared to the images showing on the iWeb application.
    I used the 'Adjust' panel to increase the color, and after published again, but althought the images were more expressive, they still did not match the equivalent in iWeb application, continued not so vivid.
    What might that be?
    More or less a month ago, I also published images and the colors matched perfectly with the material seen in the iWeb application.

    I have placed two comparison examples in my file sharing folder.
    Maybe it might help explain what I am experiencing. The differences may be subtle but they exist.
    For my file sharing the address is
    http://homepage.mac.com/hito_/Menu4.html
    Maybe this might help.
    These images were transported from iPhoto

  • Appraisal document not trigerring to the part appraiser ID

    Hi All,
    In PMS,the appraisal document is not triggering to the part appraiser's ID.It is triggering to the direct manager (appraiser ID),but the document is not visible to the part appraiser.Can anybody throw some light on the issue.Help is highly appreciated.
    Thanks,
    Deepti R

    Resolved.

  • HT201269 my purchased ringtones did not transfer in the backup/restore process how can I get them on my new iphone?

    I swapped my 4s for an iphone 5 and have restored everything except the ringtones did not download from the old phone.  what do I do?

    Thi smight help you to download past purchases http://support.apple.com/kb/HT2519

  • Quantity good receipt not match with the PO/ BOM quantity ( material subcon

    Dear Expert,
    When I did the first MIGO for material subcontracting the quantity is exactly the same (match)  with the PO and BOM,
    but when I did the second MIGO, the quantity is not the same anymore. There is variant between MIGO and the PO quantity
    what is the problem, and why does it happen?
    if can please do reply me as soon as possible
    Thanks
    Pauline

    Hi Pauline,
    What do you think of exactly? Component quantity or the quantity of the main item (F-30 material)?
    Please describe your problem more exactly (if possible trough an example) as well as the steps you did.
    remark:
    I would suggest that you should post such question in MM forum (your chance would be higher to get answer):
    SAP ERP - Logistics Materials Management (SAP MM)
    Regards,
    Csaba

Maybe you are looking for