Workflow Subscription Time out

Hi,
I did a simple subscription workflow on manual activity. When status change from Pending to In Progress, I set a field. The workflow works fine almost all
day. However, I had seen many time out exceptions on event viewer e some other systems workflows with the error
“The database subscription query is longer
than expected. Check the database or simplify the database subscription criteria.
The following errors were encountered:
Exception message: Subscription query is taking long.
Subscription id: df0dcc33-a1c4-643c-4a03-319974477d75
Time spent in new state: 00:00:10.0138210
Time spent in querying state: 00:00:10.0648946
One or more subscriptions were affected by this.
Subscription name: ServiceManager.ActivityManagement.ActivityStatusChangedRule”
As I use powershell script to change a field activity, I would like call a .Net code beside powershell to increase performance. Anybody could send me a documentation about
this? What’s best practice to customization workflow at Service Manager?
Juan

Hi,
This is an indication that the database is being overwhelmed by the activity happening on the database. It could be because there are too many workflows. It could be because there are some connectors running that are hammering the database. It
could also be that there are too many users updating the database. It could also be that the subscription criteria is too complicated and involves too many table joins. Or it could be some combination of all of those things. If you see this
event consistently for one particular subscription and not others that is an indication that the criteria for that particular subscription may be too complicated or there are a lot of transactions that are happening frequently for the target class of that
subscription.
Please refer to the article below to troubleshoot this issue:
Troubleshooting Workflow Performance and Delays
http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
And here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/9b0ead30-80e7-4147-8b16-c88cc1f9cd94/sql-query-warning-on-scsm-server
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Workflow install time-out error

hi,
i get a time-out error during wf configuration assistant. i believe that is has something to do with a database/workflow language conflict. the ca aborts just after setting and resetting env var 4(?) nls_lang/wf_nls_lang. any thoughts?
thanks,
kp

Your question is overly terse. As this ain't Twitter, maybe you can use a few more characters to describe what you are asking for?
Timeouts can occur in a couple of situations:
1) On connections. By default, most client APIs give up if the connection has not completed within 15 seconds. This value is usually adjustable.
2) When running commands. Many client APIs has a default timeout of 30 seconds, meaning that if SQL Server has not returned any data in this time frame, they give up and tell SQL Server to stop executing. If you experience this, you need to determine whether
the timeout is the problem or the fact that it takes 30 seconds is the problem. The timeout is adjustable on the Command object. The default is a hole in the head in my opinion.
3) Lock timeouts. This is a timeout that occurs inside SQL Server (in opposition to the other two) when a process has been waiting for a lock long enough. The default here is -1 which means "wait forever". But you can use the command SET LOCK_TIMEOUT
to set an explicit lock timeout.
4) When talking to linked servers. These timeouts are really the same as the first two, but they occur inside SQL Server, as here SQL Server is the client with regards to the remote data source. The default for queries is 10 minutes, a little more generous
than the default in the client API.
Erland Sommarskog, SQL Server MVP, [email protected]

Error occurs when trying to purchase Dreamweaver subscription - Time out error

Hi there
I am trying to purchase Dreamweaver subscription with my Master Card and when I accept terms and proceed to pay a message box pops up, see screen capture below:
Could this be my Master Card or is there something else perhaps on Adobe's side that causes this error.

Hi
There are a number of possibilities, (not including an Adobe server problem).
You have taken too long between entering your details and entering your card details.
You used the browsers 'back' button for some reason.
You have cookies turned off.
For the first item - The application times out when a user takes more time that set between completing the form and entering their card details. This is done as a security measure.
The second item - The use of the back button causes problems as the data sent to the server is duplicated, (often the use of the back button invalidates a purchase process).
The third item - Cookies are required in order for the purchase process to take place.
PZ

Time Out ERROR CC Risk Analysis RFC

Hi Friends,
I am getting time out error when I am testing the CC risk analysis RFC. One thiing I monitor here is that when I am changing the parameters to 'YES' in tcode '/virsa/zrtcnfg',this RFC time out is occuring,when I am changing it back to 'NO' it is working fine.
I beleive there is some system perfomance issue or any bottleneck is happenning.
Please check error details of the Rfc below
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program GRCRTTOCC5X not registered
Error Details     LOCATION: SAP-Gateway on host hostname / sapgw00
Error Details     DETAIL: TP GRCRTTOCC5X not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 65055
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1960
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Mar 11 09:21:35 2010
Error Details     VERSION: 2
and also some time I am getting below error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate of registered program
Error Details     LOCATION: SAP-Gateway on host hostname / sapgw00
Error Details     DETAIL: TP GRCRTTOCC5X init/busy for more than 60 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 65068
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1937
Error Details     RETURN CODE: 677
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Mar 11 09:29:56 2010
Error Details     VERSION: 2
Any suggestion please..
Thanks & Regards,
Satyabrat
Edited by: Satyabrat Mohanty on Mar 11, 2010 11:54 AM
Edited by: Satyabrat Mohanty on Mar 11, 2010 12:00 PM

Hi,
for further information the latest log is
2010-04-28 07:01:47,706 [SAPEngine_Application_Thread[impl:3]_18] ERROR User :   not found to get full name
2010-04-28 07:02:21,066 [SAPEngine_Application_Thread[impl:3]_11] ERROR
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.workflow.client.WorkflowRequestClient.getRoleProcessContextDtos(WorkflowRequestClient.java:284)
     at com.virsa.re.workflow.client.WorkflowRequestClient.execSubmitRoleApprovalWF(WorkflowRequestClient.java:83)
     at com.virsa.re.workflow.actions.WorkflowRequestAction.submitApprovalRequest(WorkflowRequestAction.java:95)
     at com.virsa.re.workflow.actions.WorkflowRequestAction.execute(WorkflowRequestAction.java:54)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
FYI
I have already checked all the webservices urls and password everything is fine.am I missing something.
Regards,
Satyabrat

Ftp time out

when transfering a file to an ftp site, it appears final cut server first touches a new file on a remote ftp site, then encodes the source file, then starts uploading. this causes the connection to the ftp server to time out if the encoding takes a long time.
unfortunately, i cannot change the timeout setting on the remote ftp server (not my server). anyone know how to prevent this? anyone know what fcs is using to upload via ftp? is there maybe a config file in the os where i can set a "keep alive" value?
d.

No, but I can give you a workaround:
Instead of having a copy response encode to the FTP device, create a local watcher that you can set as the destination for your transcoding copy response. Be sure to wildcard exclude "fcsvr*" so that the watcher does not grab the file before it has been given its final name. On the watcher, apply a copy response with no transcode option followed by a delete response.
If you are triggering a subscription on an existing asset to get this whole ball rolling, I also recommend adding a script response to the subscription stack after the transcode copy response. Make it do this:
Command path = mv
Parameters = "/<path to local watcher>/\[Title].mov" "/<path to local watcher>/\[Asset ID].mov"
Include the quotes when you set the parameters, they are important. This response will rename your transcoded movie with a unique integer instead of the potentially FTP-unfriendly asset title value that is the default for copy responses. Of course, if your transcode makes something other than a .mov, adjust the parameters above for the file type suffix your transcode produces.

Time out period for PO approvals in worklist

Hi all,
Can any one know how to check the time out period for PO approvals in worklist other thant workflow builder like from system adminstrator or a query etc.,
Thanks in advance,
Regards,
Pramod

Hi,
The following note might solve your problem :
1330433.
Thanks and Regards,
Vignesh Ravikumar

How often are FP Server subscriptions sent out?

According to http://zone.ni.com/devzone/cda/tut/p/id/3346, "The network module periodically sends and receives a time-synchronization signal so that it can adjust its clock and provide proper timestamping. When signals do not change over long periods of time, the client (the FieldPoint Server) sends periodic resubscribe messages to verify that the system is still online."
How often are Fieldpoint Server subscriptions sent out for resubscription? Can the time period be adjusted?

CoN_Glenn,
That's a really good question. I am currently investigating this with some colleagues of mine, and I will post what I find out as soon as I know.

Extend the notification time out for SSHR approval requests

Hi,
I want to extend the due date (Approval notification time out) of SSHR notification approval from 3 to 5. But I could not able to found any attribute having 3 days (4320 minutes). In hrssa workflow, I have found the constant value 525600 for attribute HR_APPROVER_NTF_TIMEOUT_ATTR (Approver Notification timeout in Minutes).
Please help out how to change value of notification time out?
Regards,
Umar

Hi Kashif / Hassnain
I follow the given steps in suggested notes and did required changes for five days. It gives following errors while saving the workflow.
Note: It is the first time; I am doing modification in workflow. Please guide, is there any prerequisite which I need to follow before doing changes in workflow?
Errors:*
382: Design Validation generated 12 warning(s). You may save invalid definitions but they should not be used in running process.
354: 'SAVE' validation failed for activity 'HRSSA/HR_SAVE_FOR_LATER_OTHER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_SAVE_FOR_LATER'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTIFY_RFC_OTHER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTIFY_RFC_INITIATOR_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_NOTFY_APPROVER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_INITIATOR_SFL_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_INITIATOR_RFC_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_SFL_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_RFC_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPROVER_NTF'.
351: Notification activity's message must have a respond attribute named 'RESULT' with lookup type 'HR_V5_ALL_RESPONSES'.
354: 'SAVE' validation failed for activity 'HRSSA/HR_APPRAISAL_REJECTED_PRC'.
362: Validation failed for child activity 'HRSSA/HR_NTF_FINAL_REJ_EMP_V4_NTF'.
383: Notification activity must be assigned a performer when used in a process.
328: 'SAVE' validation failed for message 'HRSSA/HR_APPRAISAL_MACHANGE_MGR_MSG'.
401: Could not find token 'APPRAISEE_NAME' among message attributes

SSO Partner Application and Session Time out

Hi ,
We have an application on forums.oracle.com which is implementing the Authentication scheme as SSO, that is working well, now we want to implement Session Time out if the user is idle for some time and ask him to login again after the session fails, I have tried to implement this feature as given by Scott in the thread session timeout , well the problem is since we dont have a login page here how do we set the cookies owa_cookie.send(
name => 'HTMLDB_IDLE_SESSION',
value => to_char(sysdate+(20/1440),'DD-MON-YYYY HH24:MI:SS'),
expires => null,
path => '/',
domain => null
and where is the current point to implement it.
Any help on this is greatly welcome.
Thanks in Advance.

Naveen,
I don't remember how the solution works. But if you don't have a login page you can usually put code in the post-authentication process of your authentication scheme to do whatever the login page process would have done.
Scott

CRM WEB UI - Time out Pop-up

Dear All,
We have a business requirement to monitor and optimize the CRM WEB UI timeout and other related issues.
I would like to have time-out pop-up for the call center agents and hence they could better manage the sessions .
This will avoid loosing the valuable customer data for the session and so on.
We are now working on the following threads with CRM Technical folks.
Please share your experience or the detailed steps if you had implemented already.
SAP note 1877120 - CRM-IC: session timeout issue with CRM 7 EHP1 and higher
Also , have a look http://scn.sap.com/community/crm/webclient-ui-framework/blog/2012/05/17/session-time-out-warning-message-on-ui
2092893 - Session Time Out Notification
Regards
Venkat

Hello Venkat,
For business roles of type IC Webclient, you have to implement SAP Note 1877120. Don't forget to update your view layout in your custom enhancement if you have enhanced CRMCMP_IC_FRAME/HiddenView.
After implementation of 1887120, also implement 1977631 and 1955366.
Best Regards,
Sigrid

RCA Connection Pool idle Time-Out takes no effect !

My question description goes here.
According to JCA specification, I developed my 'ManagedConnectionImpl' class from the interface 'ManagedConnection'. I realize the 'destroy()' function to send out logout request to the EIS.
Then I deployed the connector in Sun Java System Application Server, I noticed there are two parameters in Connection Pool part, they are:
1. Idle Timeout. It said it's the maximum time that a connection can remain idle in the pool. I assume the connection will be removed after the specific time expired and before it's removed it will call the recallable function, 'destroy()', in my concrete class, 'ManagedConnectionImpl'.
2. Pool Resize Quantity. it said it's number of connections to be removed when pool idle time expired.
I am weird about it. I think EIS had itself session control strategy, if the specific session time-out expired, it will invalidate this session. So I think we will set 'Idle Timeout' in application server to be shorter than the EIS session time-out. If the 'Idle Timeout' in application server expired, it should remove all connections inside otherwise maybe the connection with invalid session will exist! (the background knowledge is our system will return back soap fault when it meets invalid session, so the invalid connections will not be removed by switching on your configuration item, 'On Any Failure')
So I set "inital and minimum pool size" to 8, "maximum pool size" to 32 and "Pool Resize Quantity" to 32. (I expect AS to remove all when pool idle time expired)
After deploying, I send out requests at the first round and wait for the time expired but I can't see the desired logout requests from pool automatically even one. Firstly I guess if my recallable function definition is wrong but when I shut down the Application Server, the desired logout requests are sent out from pool automatically. So I think my recallable function definition is workable.
What's your comments on it?
P.S.
I am using Sun Java System Application Server 8.1.
Thanks in advance!
BRs
/Leo

I have had following test to ensure I sent out notification to listener.
[#|2005-08-23T16:14:25.061+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
It's in managed env!|#]
[#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
enter matchManagedConnections() !|#]
[#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
try to find a matching and existing one, reuse it!|#]
[#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
Found a matching and existing one, reuse it!|#]
[#|2005-08-23T16:14:25.495+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
tearDown() is called, the application-level connection is released!|#]
[#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
enter calling close() of managed connection.|#]
[#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
Start calling close() of managed connection.|#]
[#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
start to notify the listener the completeness of connection.|#]
[#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
notify the listener the completeness of connection successfully.|#]
Whether it's related with the initial and minimum number parameter? Although I found it will not be created during AS start-up and will be created at the first request.
Whether it shall be kept to meet the minimum requirement? I have failed to set it to 0.

Getting time out error when running the assigned verification in DRM 9.3.2.

Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiya

Please suggest me the solution.
regards,
sathiya

Session time out when trying to redeem card!?

hi, I have tried to redeem my card 5 times now, and itunes keeps saying "session time out your sessions has timed out please try this operation from beginning" I am dualbooting windows xp and windows 7, I have used both OS's and still the same thing. when I try to redeem it on my ipod touch it tells me I have the wrong code. I do not have a mac availble im on vecation and only brought the PC laptop.
if it matters im using the itunes canadian store.

This worked for me:
Establish in her router a WEP 128 bit data encryption password. (Post back if you need help on this). Apparently macs have slightly different Airport drivers and work better with WEP 128 bit than with WPA although this doesn't explain why my friend's MB had your mum-in-law's problem but could connect to my WPA protected network - go figure! Anyway, try a different password encryption and see if that works.
As for not sending mail, check with your Mail Server what the SMTP setting should be.
Joe

Session time out app store

I keep getting session time out whenever I try to purchase apps on iPhone 5. It keeps asking me to verify my credit card security number and then when I click DONE, it tells me session time out. Anyone can help?

Having problem with internet connectivity on WIFI - anything that depends on DNS for data whether it is a web browser or an app while using WIFI. I call this problem "WIFI Lockout".
This happens on iphone 4, ipad 2 and ipad 3 that has been updated to iOS 6.
I am not talking about the issue of the missing apple page (day 1) or the inability to turn on/configure WIFI after updating to iOS 6.
This is what i have discovered so far.
You could be in the middle of surfing or using any app that makes data calls based on DNS (when you type google.com that is translated in the background so your device knows where to go - summary only) and suddenly you can go no where or do nothing!
Sometimes conectivity goes trouble free for long periods, other times it is repetitive "WIFI Lockout".
Yea sure, you can restart the WIFI connection, but WHO wants to CONTINUALLY do that?
Interestingly enought the device is still successfully connected to the internet via WIFI, but DNS request fail to pass successfully from the iOS 6 device.
Apple (or any curious iOS 6 user that wants to see my point), when this happens "WIFI Lockout" open up a browser before you reset the WIFI connection and type type 74.125.227.144 (google) and then “go” (I tried both safari and chrome). A google search page will come up and you will be able to execute a search (of course any link you click on will not work as it is dependant on DNS resolution).
The above IP connection to google proves NON DNS traffic works, so the issue is not the WIFI connection to the access point that is the problem. It is not an access point configuration/firmware or security protocol issue either because data does pass when the above steps are followed.
I KNOW THIS IS NOT ALL OF THE PROBLEMS WITH iOS 6, BUT THIS IS A HUGE PROBLEM NOT BEING ABLE TO SURF OR GET DATA THE iOS 6 DEVICE IS REQUESTING WHILE ON WIFI.

Session time out

Hi,
Is there any way to set ovm manager gui session time out.
as of now, if there is no action in gui for 2 mins,
session gets timed out.
Importing a template takes lot of time and session is
getting timed out just after 2 mins.
I have another question. Even if session times out,
does importing template continue?
Thanks
Ram

887506 wrote:
Is there any way to set ovm manager gui session time out.There is a way to increase the WebLogic timeout, but I'm not 100% sure on the process. Best thing to do is open an SR with Oracle Support so they can provide the exact steps.
I have another question. Even if session times out,
does importing template continue?Yes, this all happens on the Server/Manager side and doesn't require you to remain logged into the UI while the job runs.

Workflow Subscription Time out

Similar Messages

Maybe you are looking for