Workflow with images

Hi all!
I just got a Fuji Finepix S5600, who's RAW format isn't supported by OSX.
So i'd like to create a worflow using automator, without success for now.
1 - Image tranfer : I get all the images (Jpegs or RAW (.RAF) downloaded to a folder.
2 - I want the Jpegs to be imported into iPhoto, and the RAW images opened with Adobe DNG Converter.
3 So here comes the automator workflow :
a - The first line is "prefilled" (obtain elements from the finder, sorry i try to translate from french, with my picture folder selected in the options.
b - I add Filter elements from the finder (in the options, extension is .JPG)
c - Imprt into iPhoto with nothing special selected in the options but "add to last album" + "delete source images after import"
d - Filter elements from the finder (.RAF extension documents)
e - Open images withAdobe DNG Converter
So when I try to run it everything seems to be OK, iPhoto opens, import starts but nothing is actually imported. The RAW conversion is OK
Two questions :
How do I fix this?
Since I want it to be a folder action, how do I save this worklow? As an App? A workflow? I have no clue...
How do I attach it to the folder? In the contextual i have two options : either "configure folder action" (and for now in this case, I cant select the scripts I've done with automator, they remain grey) or "attach action to folder (same issue)?
Thanx for your reading and for your informations !

If you're going to do this as a folder action, you shouldn't have the first 'Get Specified Finder Items' action. The reason is folder actions act on files as they are being added to the folder. For this reason also, it may not work as a folder action as you are importing if the files are large or take time to process.
To debug this, since it may be the initial Filter Items causing issue, add a 'View Results' action -in the 'Automator' section of actions- after the first Filter Finder Items to see if the .jpgs are successfully filter for passing to iPhoto. Post back with your results...

Similar Messages

Workflow with images,file names and full captions.

I am working on my mother's memoirs, which will include a block of photo pages. Those pages will be laid out by a friend. I would like to use a contct sheet of some kind as a reference to what is to be included with what caption but am discovering just how difficult PE8 Organizer is to work with.
First I tried the obvious print contact sheet and discoverd that captions are truncated if they run wider than the image itself.
Secondly I tried a photo book and found that large images do not automatically resize to fit the picture placeholders. Seemed to pick up full caption but I have too many pictures to manually fit.
Third I tried a web page output but then captions can't be copy and pasted for inclusion into group caption panels!
Then it occurred to me that even just a list of file names and captions would be sufficient ... but even that is too much for an Adobe catalog to give up!
All I want is a reference to images and captions, ideally grouped 4 at a time per page as they will be shown in those picture pages.
Any suggestions would be welcomed.

I can see two ways to do what you want.
The first one is to divide you workflow in two steps. Install the free software FastStone image resizer, which can do a batch to resize and put your caption where you want. Batch process the files in a new folder while renaming them with something like 'old name'+ 'resized'. This is to avoid duplicate names. Import them into the organizer. Create an album with all those files, and put them in the correct printing order. Select all and export 'as new files' renaming them with 'common base name', in original format. That should keep the custom order of your project.
There are also batch renaming and resizing with the affordable Elements+ add-on, but I suppose the first solution will be easier.

Workflow with image downloads....

Hi,
Just wondering if someone could post a brief description of their workflow when downloading photos from a media card? Do you import them only into iphoto, or do you copy them to your hard drive and then import to iphoto? (I understand there is a duplication factor here.)
As well, I'm used to resizing my final picture in Photoshop through the image resizing option which of course lowers file size. Does iphoto have such a capability?
I'm new to iphoto (and the Mac), and I like the image adjustment tools with the exception of the touch-up tool. Have any of you began to use iphoto in place of Photoshop for some of your work?
Thanks to all in advance
HH

happy hanks
Welcome to the Apple Discussions.
I import directly into iPhoto, what's the point in the duplication?
As well, I'm used to resizing my final picture in Photoshop through the image resizing option which of course lowers file size. Does iphoto have such a capability?
Okay, here's a quantum shift: resizing the file like this will actually take more disk space, not less. Why? because iPhoto ALWAYS keeps your Original file and all operations are carried out on a copy. So, when you edit, iPhoto preserves your original and saves the changes in a modified version.
You can resize pics with iPhoto on export (File -> Export)
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically.
I use iPhoto for the basics - which is about 95%, like I need PS for cropping? - then PS for the rest.
Regards
TD

RAW editing workflow with Photoshop Elements 6

I have been using the following workflow with RAW images in iPhoto and editing them in Photoshop Elements 6. It seems to be working fine. Does anyone see a problem with my workflow???
I choose to edit in external editor (Elements 6), and the image opens in Camera Raw. I make my edits here because I really like the editing power of Camera Raw. After I am finished, I chose Save As and choose jpeg. The save dialog tries to save back to the Originals folder in the iPhoto Library that the RAW file came from, so I simply choose the appropriate event in the Modified folder and save it there. It replaces the jpeg that iPhoto had created when the original RAW file was imported. When I go back to iPhoto the changes are applied.
Now I realize that I can't reopen the original RAW file again in Elements without reverting to original, but that is usually not an issue. I also realize that messing with the iPhoto Library outside of iPhoto can be dangerous. Another drawback is that I haven't been able to open multiple RAW photos from iPhoto into Camera Raw so I can apply changes all at once.
But I can't see anything wrong with the workflow. Am I on the right track, or am I missing something?

No, I don't believe you can do that with RAW editing. By manually replacing the first modified version with your RAW edited version iPhoto will not update the thumbnail. You will be able to see the edited version if you go to the edit mode or full screen mode. But the thumbnail will not be identical. If that's OK with you then you should be able to go with that workflow.
If the edits are significant enough you might want to save the new file to the desktop and import as a new file.
You can try this on a copy of the iPhoto Library. Open the library package and move the contents of the Data folder to the trash along with the Thumb32Segment.data, Thumb642Segment.data and ThumbJPGSegment.data files. Then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. This will rebuild the thumbnail files and my reflect your edited versions. Again, make a backup copy of the library before trying this.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Take Control of Workflow with Workflow Analyzer! See Note 1369938.1

Take Control of Workflow with Workflow Analyzer! Immediate Analysis and Output of your EBS Workflow Environment.
The EBS Workflow Analyzer is a script that reviews the current Workflow Footprint, analyzes the configurations, environment, providing feedback, and recommendations on Best Practices and areas of concern.
Video - Watch a 9-minute overview video (9:00)
Go to [Doc 1369938.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1369938.1] for more details and Script Download.
Proactive Benefits:
Immediate Analysis and Output of Workflow Environment
               Identifies Aged Records
              Identifies Workflow Errors & Volumes
              Identifies looping Workflow items and stuck activities
              Identifies Workflow System Setup and configurations
              Identifies and Recommends Workflow Best Practices
Easy To Add Tool for regular Workflow Maintenance
Execute Analysis anytime to compare trending from past outputs
[Please send any items to Feedback.|https://communities.oracle.com/portal/server.pt?open=514&objID=224&mode=2&threadid=297966]
Edited by: user715498 on Feb 14, 2012 11:09 AM
Edited by: user715498 on Feb 14, 2012 11:12 AM

14. Once my photos look the way I want, I then export them to JPEG. I have set up a Photoshop droplet for Lightroom that will then do all my sharpening after export.
That's it! I know it sounds like a lot of steps, but once you've done it a couple of times it goes by really quick. I'm really loving most things about Lightroom in terms of its cataloging and export options. But the image quality of the Lightroom raw conversions just isn't there yet. I've found by integrating both Capture NX and Lightroom I can get top quality results while still gaining advantage of Lightroom's many nice features. It took me a few days of exploration and experimentation to nail down the optimal workflow for my needs. Hopefully this will help some others out and maybe give them some ideas of their own toward a better workflow.
Please feel free to share your thoughts or own experience on all of this.
Thanks to Tony Long for his suggestion in this thread, which caused me to go on a search for the optimal Lightroom/Capture workflow: http://www.adobeforums.com/cgi-bin/webx?7@@.3bc719df/3
If you are interested in taking a look at the final output of the workflow listed above, please look here: http://photos.unsavory.com/p634883589
Cheers everyone!
-©aine

*Shocked* by the performance of Canon DPP, and DDP workflow with Aperture

I love Aperture. My brother mercilessly hounded me for two years, and when Aperture 2 came out, I gave it a shot. Aperture 3, despite my nightmare conversion story, has been a dream come true . . . until I discovered sharpening.
In my quest to get sharper photos, I've toyed with image stabilization, tripods, higher shutter speeds, steadying the camera, and depth of field, and even bought several professional lenses. My photos STILL did not look as sharp as those I saw in galleries and online. But wait . . . my JPEG files from my sporting events did . . .
I read that RAW files are not sharp, and sharpening is applied to JPEGs on the camera. But why is Aperture and my MBP not able to sharpen photos well using any one of the three sharpening sliders or the sharpening tool? I was then led to DPP, kicking and screaming. What I discovered was truly amazing.
Forget about the personal opinions with warmth and contrast between Aperture, ACR, and DPP. DPP is the unquestioned leader in producing sharp photos from RAW images. You drag the slider . . . it's sharp. It's even sharper than the photos I've spent 20 minutes sharpening in CS5 with sharpening masks, sharpening tool, etc. The DPP tool JUST WORKS. Even noise with high ISO is MUCH improved. High noise still can use an expensive tool to correct, but still MUCH better than Aperture.
Until Canon reveals their secrets to Apple and Adobe for RAW processing, I need to figure out a way to use DPP for RAW processing.
For those that use DPP for RAW processing, how to you work it into your workflow? I want Aperture to be a one-stop shop, but I don't want to store the original RAW, the DPP-edited RAW, and potentially a TIFF for additional editing and noise reduction?
Do you sort in Aperture first? Do you convert in DPP first? How do you maintain file integrity, and at the same time, minimize disk space usage?
If you no longer use DDP, please tell me why, and how you've worked around it?

All I can say is, either I've been in the weeds all this time, or your skills with sharpening are better than most.
A couple of questions:
1-What do you use under Sharpening for and Edges under "RAW fine tuning" you thankfully shared your settings for Edge Sharpen (^s)
2-What camera and RAW format are you using (this may help me fine-tune my preferences). I've got a 7D and primarily shoot MRAW. (Not the best for a couple reasons, but I don't need or want the large file sizes.)
To be sure, default sharpening in Aperture is pretty bad. And I have played with sharpening going on 40 hours now over several months. I could not get a good result.
Your documenting the exact settings and sharpening tool is what helped me get past whatever I was doing before. Maybe I was thrown by the higher default contrast in DPP. I'm now able to produce a better result in Aperture than DPP, or even my laboriously-sharpened photos on Photoshop. There are some tradeoffs in each, but I didn't want to use DDP as part of my workflow. Now that I've used it more, I'm convinced I don't!
And the definition setting is very useful. It's the only mainstream adjustment I've never really used.

New Nikon Workflow with Lightroom

Just thought I would share my new workflow with everyone, in case anyone is not happy with the raw conversion provided by Lightroom and would rather use Capture NX to do the raw conversion on their files, but still use Lightroom for cataloging and ranking their photos (as well as exporting for web, etc).
1. Copy all photos from memory card into a folder on your computer.
2. Import the photos from your filesystem, using the "Copy photos to a new location and import" option. This is so you can work with a copy of the original, rather than the original.
3. Do your normal process for choosing which photos you would like to take the time to process, and which you would like to just throw away. I use the pick/rejected flags for mine.
4. Filter your photos by flag status, so only the picks are showing.
5. Export your picks to a temporary folder somewhere. This is where you will do all your Capture NX processing. I call this folder "Lightroom to Capture Transfer". You want to choose the option to export the original file. I created an export preset called "Export For Capture NX" with these settings in it to make it easier in the future.
6. Open the "Lightroom to Capture Transfer" folder in Capture NX using the built in file browser, and do all your raw adjustments to exposure compensation, white balance and noise reduction. All of which I find works better in Capture than in Lightroom. Save all your changes back into the same NEF file since Capture can save to the NEF format. Remember this file is just a copy of the original so we don't need to worry about making changes to our original raw file here. NOTE: Do NOT apply any sharpening here inside Capture since sharpening should be done at the end of your workflow. I shoot with my camera sharpening set to "None". If you haven't done this, you should set all your photos to sharpening "None" as part of your batch process in step 8 below.
7. Set up a watched folder in Lightroom called "Lightroom Auto Imported Photos", and enable Auto Import.
8. In Capture, create a batch process you can use to convert all your adjusted raw NEFs to tiff format. You will point the batch export to your Lightroom watched folder. As Capture batch converts all your raws to tiff, Lightroom will be importing them into your catalog.
9. Now you should have a folder inside your Lightroom catalog called "Lightroom Auto Imported Photos". Open that folder, select ALL the photos in the folder and hit "P" to mark them all as picks. Trust me on this one. =)
10. Now within Lightroom, drag all the photos at once into the folder containing your imported photos from step 2. You should see all your tiffs beside all your raw NEFs. And since you have a filter turned on to only show your picks in this folder, all your other non pick original raw files will be hidden.
11. Again, select ALL the photos in this folder and "Stacking -> Auto Stack by Capture Time." In the dialog, drag the slider down to 1 second. This should for the most part stack all the same nefs with the corresponding tiffs. Unless you were doing a ton of burst shooting. In which case you can manually stack them. Lightroom seems to always put the original NEFs on the top of the stack.
12. Select all the photos again, and "Stacking -> Move Down in Stack". This will bring all your processed tiffs to the top of the stack, and hide the nefs. This is exactly what you want. From here on out, you will be working on the tiffs.
13. Do any final processing to your photos inside Lightroom. Saturation, cropping, spot removal, etc. I also do all my key-wording here. NOTE: I do not do ANY sharpening inside Lightroom because I've found the sharpening just doesn't do it for me personally. I will do all sharpening later in Photoshop after I export them from Lightroom. Your mileage may vary.
14. Once my photos look the way I want, I then export them to JPEG. I have set up a Photoshop droplet fo

14. Once my photos look the way I want, I then export them to JPEG. I have set up a Photoshop droplet for Lightroom that will then do all my sharpening after export.
That's it! I know it sounds like a lot of steps, but once you've done it a couple of times it goes by really quick. I'm really loving most things about Lightroom in terms of its cataloging and export options. But the image quality of the Lightroom raw conversions just isn't there yet. I've found by integrating both Capture NX and Lightroom I can get top quality results while still gaining advantage of Lightroom's many nice features. It took me a few days of exploration and experimentation to nail down the optimal workflow for my needs. Hopefully this will help some others out and maybe give them some ideas of their own toward a better workflow.
Please feel free to share your thoughts or own experience on all of this.
Thanks to Tony Long for his suggestion in this thread, which caused me to go on a search for the optimal Lightroom/Capture workflow: http://www.adobeforums.com/cgi-bin/webx?7@@.3bc719df/3
If you are interested in taking a look at the final output of the workflow listed above, please look here: http://photos.unsavory.com/p634883589
Cheers everyone!
-©aine

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv. I've been unable to locate an app that will do this.

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
I've been unable to locate an app that will do this. The Photos app that comes with the phone or iPad has extremely limited duration controls. PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
iPhoto for iPad is getting some terrible recent reviews. I tried a couple other free apps but they don't use Airplay.
I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV. I've thought the iPad or iPhone would be a lower profile controller.
Am I out of luck?

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

WYSIWYG editor upload with images

Hello, friends!
I need help solving following problem:
I need to create WYSIWYG editor, which just to enter text and image. Other options (like font-size, font-weight...) not need. Then when submit the form with richedit, all data in form with images must sent to server.
1) images must upload
2) text must content following: text <img="src=../image1.png"> text <img="src=../image2.png"> text
or maybe all images must save as a blob data
Help me, people!

Is this an Oracle question?

Online banking site now shows login page as text-only; on different computer it still shows page with images and clickables -- is there a fix?

Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Exception while Exporting Datagridview data with Images to Excel...

Hi Everyone,
I have datagridview in that 17 columns are text columns and 5 columns are Image columns,when I'm trying to export whole gridview data's along with images to EXCEL,getting "HRESULT:
0x800A03EC" Error..While debugging the code I'm getting the error on image column not able to export..
Can anybody help us to resolve this issue..
Here is my code which i used:
private void btnexportexcel_Click(object sender, EventArgs e)
try
SaveFileDialog savefile = new SaveFileDialog();
savefile.Filter = "Excel (*.xls)|*.xls";
if (savefile.ShowDialog() == DialogResult.OK)
if (!savefile.FileName.Equals(string.Empty))
FileInfo finfo = new FileInfo(savefile.FileName);
if (finfo.Extension.Equals(".xls"))
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
object misValue = System.Reflection.Missing.Value;
xlApp = new Excel.Application();
xlWorkBook = xlApp.Workbooks.Add(misValue);
xlWorkSheet = (Excel.Worksheet)xlWorkBook.Worksheets.get_Item(2) ;
int i = 0;
int j = 0;
for (i = 0; i <= dataGridView1.RowCount - 1; i++)
for (j = 0; j <= dataGridView1.ColumnCount - 1; j++)
DataGridViewCell cell = dataGridView1[j, i];
xlWorkSheet.Cells.Borders.LineStyle = Excel.XlLineStyle.xlContinuous;
xlWorkSheet.Columns.AutoFit();
if (cell.Value.GetType() == typeof(Bitmap))
string image =Convert.ToString(dataGridView1.CurrentRow.Cells[i].Value);
Excel.Range oRange = (Excel.Range)xlWorkSheet.Cells[i + 1, j + 1];
float Left = (float)((double)oRange.Left);
float Top = (float)((double)oRange.Top);
const float ImageSize = 32;
xlWorkSheet.Shapes.AddPicture(image, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoCTrue, Left, Top, ImageSize, ImageSize);
oRange.RowHeight = ImageSize + 2;
else
xlWorkSheet.Cells[i + 1, j + 1] = cell.Value;
xlWorkBook.SaveAs(savefile.FileName, Excel.XlFileFormat.xlWorkbookNormal, misValue, misValue, misValue, misValue,
Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
xlWorkBook.Close(true, misValue, misValue);
xlApp.Quit();
releaseObject(xlWorkSheet);
releaseObject(xlWorkBook);
releaseObject(xlApp);
MessageBox.Show("Excel file created , you can find the file " + savefile.FileName);
else
MessageBox.Show("Invalid file type");
else
MessageBox.Show("You did pick a location " + "to save file to");
catch (Exception ex)
MessageBox.Show("Exception Occured", ex.Message);
Thanks & Regards RAJENDRAN M

Hi Everyone,
I have datagridview in that 17 columns are text columns and 5 columns are Image columns,when I'm trying to export whole gridview data's along with images to EXCEL,getting "HRESULT:
0x800A03EC" Error..While debugging the code I'm getting the error on image column not able to export..
Can anybody help us to resolve this issue..
Here is my code which i used:
private void btnexportexcel_Click(object sender, EventArgs e)
try
SaveFileDialog savefile = new SaveFileDialog();
savefile.Filter = "Excel (*.xls)|*.xls";
if (savefile.ShowDialog() == DialogResult.OK)
if (!savefile.FileName.Equals(string.Empty))
FileInfo finfo = new FileInfo(savefile.FileName);
if (finfo.Extension.Equals(".xls"))
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
object misValue = System.Reflection.Missing.Value;
xlApp = new Excel.Application();
xlWorkBook = xlApp.Workbooks.Add(misValue);
xlWorkSheet = (Excel.Worksheet)xlWorkBook.Worksheets.get_Item(2) ;
int i = 0;
int j = 0;
for (i = 0; i <= dataGridView1.RowCount - 1; i++)
for (j = 0; j <= dataGridView1.ColumnCount - 1; j++)
DataGridViewCell cell = dataGridView1[j, i];
xlWorkSheet.Cells.Borders.LineStyle = Excel.XlLineStyle.xlContinuous;
xlWorkSheet.Columns.AutoFit();
if (cell.Value.GetType() == typeof(Bitmap))
string image =Convert.ToString(dataGridView1.CurrentRow.Cells[i].Value);
Excel.Range oRange = (Excel.Range)xlWorkSheet.Cells[i + 1, j + 1];
float Left = (float)((double)oRange.Left);
float Top = (float)((double)oRange.Top);
const float ImageSize = 32;
xlWorkSheet.Shapes.AddPicture(image, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoCTrue, Left, Top, ImageSize, ImageSize);
oRange.RowHeight = ImageSize + 2;
else
xlWorkSheet.Cells[i + 1, j + 1] = cell.Value;
xlWorkBook.SaveAs(savefile.FileName, Excel.XlFileFormat.xlWorkbookNormal, misValue, misValue, misValue, misValue,
Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
xlWorkBook.Close(true, misValue, misValue);
xlApp.Quit();
releaseObject(xlWorkSheet);
releaseObject(xlWorkBook);
releaseObject(xlApp);
MessageBox.Show("Excel file created , you can find the file " + savefile.FileName);
else
MessageBox.Show("Invalid file type");
else
MessageBox.Show("You did pick a location " + "to save file to");
catch (Exception ex)
MessageBox.Show("Exception Occured", ex.Message);
Thanks & Regards RAJENDRAN M

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

Text jobs with images - printer cancels

When I print a text document with images the printer stops printing and cancels the print job when it starts to print any image.
Help
This question was solved.
View Solution.

Hey @sudiegal!
Thanks for posting on the HP Forums!
I would be happy to provide some suggestions that may resolve the issue. I can see that the printer cancels the jobs when you add a photo to you text document. The first thing I suggest is to remove the printer by resetting the print system. After the printer is removed re-add the printer and try printing the document again.
To reset the printing system:
1. Click the Apple icon at the top left of the computer
2. Click System Preferences
3. Click Printers and Scanners
4. Hold down the "control" key on the keyboard and click with the mouse in the white space bellow the printer
5. Click reset printing system dropdown
6. It may ask for Mac ID and will color wheel for a moment until the printer is removed
To re-add the printer:
1. Click the Apple icon at the top left of the computer
2. Click System Preferences
3. Click Printers and Scanners
4. Click the plus (+) icon under the printers list
5. Select your printer
6. Choose HP ENVY 7640 series in the dropdown next to "use" or "print using"
7. Click add
Please post back and let me know if this works out for you!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

How to concatenate the values in single row with images or colours

hi all,
i am apex 4.2,
i tried to execute a plsql query for the values concatenate two values into same column
example in my table
i am having teachers list one can teach two or three subjects
in table i am saving like
teacher_id teacher_name salary subjects
1 ram 5000 science,maths
2 gang 4000 maths,science,english
but my report should come like
teacher_id teacher_name salary subjects
1 ram 5000 science maths i have to highlighting these subjects with images or with different colors
2 gang 4000 maths english science
can any one help me please
thanks & regards
pavan
Edited by: Pavan on Apr 9, 2012 4:15 AM
Edited by: Pavan on Apr 9, 2012 4:22 AM

First of all, i would split the subjects column.
If you for sure only need up to 3 subjects, you could make three columns subject1, subject2, subject3.
If you may have an indefinite number of subjects for each teacher, you might create a detail-table with the subjects for each teacher.
I also would create a list of values for the subjects, either based on static values or based on another table with the subjects allowed.
Now that the subject-names are fixed you could create a subject-image for each subject, named as the subject itself. Then you "construct" the image for each subject as
<img src="#APP_IMAGES##SUBJECT_NAME#.png"/>

Workflow with images

Similar Messages

Maybe you are looking for