Workflow with validation

Please help :
I've created simple workflow chain including 4 steps - start, process, validate and stop. But after launching I've got error message "Unable to launch job. Step 'Validate' has the following error: Invalid validating record id(s) in Validate field". Validation works well without workflow, so I don't know the reason of error.

Hi Artur,
Kindly verify you followed the steps given below for Validation workflow:
1. In the Workflow design stencil validation property should carry the following attribute values
Validation : Should carry the validation name rather than the rule.
2. try to SAVE the same with other steps too.
IF issue still exist kindly revert to me.
thanks
Alexander

Similar Messages

How to update a custom field in declarative workflow with VS 2013

Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.

Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy

Oracle ATS Workflow and Validation process.

Hi,
Can any one know how Oracle ATS supports Workflow and Validation functionalities, or is there any plug-in's available to handle this feature.
Please post your valuable suggestions,
Thanks in Advance,
Ramesh.

Hi Rick/Rob,
Thank you for your Suggestions/advice,I will try inheriting it in my future developments.
I have iterated the complete requirement and reasons for why the Workflow is put into an error state.
In most of the scenarios (in my project) the users/agents are allowed to restart the workflows.This is already in place and have been followed hence would try to simulate Rob's suggestions and would keep you posted on it.
But w.r.t current issue it seems to be still pending.
While creating an Service entry sheet for cost objects at the validation stage the SES would be waiting for confirmation for its approval from its valid approvers if they do not find the approvers the workflow is passed to an error state , post validation the user id provided with a link where he could restart the workflow(this is already been followed and has been working well ad people are used with this process)
SES approver determination sequence:
firstly the program will check partner function users Z1 or Z2 in PO, then if it has error it checks requisitioner of PO. In requisitioner check additional check we applied for validating PO creator is from Batch Id, if yes then email is triggered at functional mailbox with the link.
Screenshots:
So till here its been a legacy process what is been followed. But now my actual issue was how to access SWPR from web or from an hyperlink.
I am able to access SWNWIEX transaction but not SWPR.
So if you have come across or have worked any such scenarios kindly let me know so that I can implement this in my workflow.
Apologies for not following the right process ,as I said earlier I ll try simulating the same workflow as per your advice and present it before the counterpart and try bringing a change in the existing process.
Thank you.
Regards,
Vivek

Problem with Validation in Struts

Dear All,
I am facing a proble with validation in struts.
I have got this code in my action class
//Initial Code...
ArrayList branches=new ArrayList();
branches.add("B01", "Main Branch");
branches.add("B02", "Second Branch");
branches.add("B03", "Third Branch");
DynaValidatorForm memberForm=(DynaValidatorForm)form;
memberForm.set(branches);
//Finalizing code.....This form is getting validated in validation.xml.
This action is being forwarded to folllowing JSP.
//Initial Code...
        <tr>
            <td align="right"><strong>Branch Name </strong></td>
            <td> </td>
            <td align="left">
                <html:select property="branid">
                    <html:optionsCollection name="memberForm" property="branches" value="key" label="value"/>
                </html:select>
            </td>
        </tr>
//Later code...I have action mapping as..
        <action path="/member/save" input="member.page" name="memberForm" validate="true"
        scope="request" type="com.mlm.action.MemberAction" parameter="action">
            <forward name="success" path="/show.do?action=member" redirect="true"/>
        </action>Now, the problem is that when the form doesn't pass the validation then it gives an exception that..
Can't find collection 'branches' in bean

sauanu wrote:
Ok, now I am giving full code of my module...
Form-bean
<form-beans>
<form-bean name="memberForm" type="org.apache.struts.validator.DynaValidatorForm">
<form-property name="id" type="java.lang.String"/>
<form-property name="membname" type="java.lang.String"/>
<form-property name="address" type="java.lang.String"/>
<form-property name="branid" type="java.lang.String"/>
<form-property name="branches" type="java.util.ArrayList"/>
</form-bean>
</form-beans>Validation is being done for all fileds except "branches". Validation type is "requried"
My Jsp....
<html:form action="/member/save?action=save">
<html:hidden property="id"/>
<tr>
<td align="right"><strong>Member Name </strong></td>
<td> </td>
<td align="left">
<html:text property="membname"/>
</td>
</tr>
<tr>
<td align="right"><strong>Address</strong></td>
<td> </td>
<td align="left">
<html:text property="address"/>
</td>
</tr>
<tr>
<td align="right"><strong>Branch Name </strong></td>
<td> </td>
<td align="left">
<html:select property="branid">
<html:optionsCollection name="memberForm" property="branches" />
</html:select>
</td>
</tr>
<tr>
<td align="right">
<html:submit/>
</td>
<b><td>   </td></b>
<td>
<html:button value="Cancel" onclick="javascript:history.go(-1)" property="cancel"/>
</td>
</tr>
</html:form>This is the code..
I tried to find out the problem and I found that.. when the form does not pass the validation its input page gets displayed..
Now, when the input is getting displayed.. "branches" field of the form contains null???Why?
Edited by: sauanu on ?? ??????, ???? ??:?? ?????????Forget,about Validations.
Who is forwarding the control to this JSP page or view ??
Is it Action method code which metioned earlier doing it ??
Or some other Action is involved if it is some other action please intialize Values of branches component in the respective action.
Also,
Also,
ArrayList branches=new ArrayList();
branches.add("B01", "Main Branch");
branches.add("B02", "Second Branch");
branches.add("B03", "Third Branch"); I believe you need to get a good understanding of Java Collection classes aswell.
You can add things as entities in the above case lets create a simple java bean named Option.
public class Option implements Serializable{
    private String label;
    private String value;
    public void setValue(String value){this.value = value;};
    public String getValue(){return this.value;}
    public void setLabel(String label){this.label = label;}
    public String getLabel(){return this.label;}
} and inside the action which is forwarding to the respective view
ArrayList branches=new ArrayList();
Option option = new Option();
option.setValue("B01");
option.setLabel("Main Branch");
branches.add(option);
option = new Option();
option.setValue("B02");
option.setLabel("Second Branch");
branches.add(option);
option = new Option();
option.setValue("B03");
option.setLabel("Third Branch");
branches.add(option);
      <html:select property="branid">
               <html:options name="memberForm" collection="branches"   value="value" label="label" />
       </html:select>and one more thing is is that after the validation if it is not validated it'd be sent back to input page which destorys the request therefore try making scope of "memberForm" to session in your action mappings and check.
Hope this might help :)
REGARDS,
RaHuL

1 year ago i installed Elements 12 on my PC with a serial number. Today i have installed Elements 12 also on my laptop. But,...there is a problem with validation of the serial number on my laptop. Is there a need to validate Elements or will this progra

One year ago i installed Elements 12 on my PC with a serial number and it was OK.
Today i have installed Elements 12 also on my laptop.
But,...there is a problem with validation of the serial number on my laptop. Is there a need to validate Elements or will this program real disapeare in 7 days?
Hans

Hi,
Since you already have one copy activated the serial number must be logged in your account details - I would first check that the one logged and the one you are attempting to enter are the same.
You can check your account details by going to www.adobe.com and clicking on Manage Account. You need to sign in with your Adobe Id and then click on View All under Plans & Products. Next click on View your products and after a while it should produce your list.
If there is a problem with the serial number, only Adobe can help you there (we are just users). Please see the response in this thread
First of all, I would have to say that getting in touch with you is a nightmare and I am not at all happy that I can't just email or live chat with someone who can help! I am not a technical person, I just want to be able to use Photoshop Elements and ge
Brian

Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

Is there a way to create SQL Dev reports with validated binds?

Is there a way to create SQL Dev reports with validated binds similar to the way user defined extensions can have <prompts> with a <value> that is a SQL statement returning a list of possible values?
This sure would make select appropriate values for binds in reports easier and less error prone.

Maybe a forum search on "Windows registry" would turn up some useful things. You're not the first to ask this. You might save yourself and everyone else some time if you'd simply do that.

Settling Rebate Agreements with Validity Start Date not Start of the Month

Hello Experts,
I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
Thanks,
M

Hi
Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
Regards
Srinath

GRC 10.0 Role workflow (with detour)

Hi gurus
could you help me, please?
My client want to create a role workflow with detour based in risk violation, can some one help me creating the rule for that (if its posible)
Thank you

kindly refer the other post which i have updated for same

RAW editing workflow with Photoshop Elements 6

I have been using the following workflow with RAW images in iPhoto and editing them in Photoshop Elements 6. It seems to be working fine. Does anyone see a problem with my workflow???
I choose to edit in external editor (Elements 6), and the image opens in Camera Raw. I make my edits here because I really like the editing power of Camera Raw. After I am finished, I chose Save As and choose jpeg. The save dialog tries to save back to the Originals folder in the iPhoto Library that the RAW file came from, so I simply choose the appropriate event in the Modified folder and save it there. It replaces the jpeg that iPhoto had created when the original RAW file was imported. When I go back to iPhoto the changes are applied.
Now I realize that I can't reopen the original RAW file again in Elements without reverting to original, but that is usually not an issue. I also realize that messing with the iPhoto Library outside of iPhoto can be dangerous. Another drawback is that I haven't been able to open multiple RAW photos from iPhoto into Camera Raw so I can apply changes all at once.
But I can't see anything wrong with the workflow. Am I on the right track, or am I missing something?

No, I don't believe you can do that with RAW editing. By manually replacing the first modified version with your RAW edited version iPhoto will not update the thumbnail. You will be able to see the edited version if you go to the edit mode or full screen mode. But the thumbnail will not be identical. If that's OK with you then you should be able to go with that workflow.
If the edits are significant enough you might want to save the new file to the desktop and import as a new file.
You can try this on a copy of the iPhoto Library. Open the library package and move the contents of the Data folder to the trash along with the Thumb32Segment.data, Thumb642Segment.data and ThumbJPGSegment.data files. Then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. This will rebuild the thumbnail files and my reflect your edited versions. Again, make a backup copy of the library before trying this.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Is it possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?

Hi,
the subject says it all. I have downloaded the trail version to see if its possible to create a editable pdf with validation(required field) using Adobe Acrobat pro version?
Basically, I will have to create a pdf form where users fill it and send it back to me. there will be required fields (the textbox and check box) that user need to fill before saving the editable pdf?
Is it possible. if so, can someone kind enough to point to me right directions?
Thanks in advance.

Thanks for reply. What I am trying to achieve is to give an option for the user to download the pdf form and once the user tries to save the pdf, it validates with the required field. I managed to create the editable pdf with required fields option. I just need that validation to be done when user click on save file. How can I achieve this? thanks so much for your help.

ALE BOM. Updates ALL! items with validity date & change no.

Hi All,
We are having problems where ALE-BOM sent with change in validity date (with change no) to a particular item. What happens is that ALE-BOM will instead update ALL! items with the same validity date and change number.
Next,when we process ALE again for the same BOM with a different validity date(with change no), then only that
particular item is updated with validity date and change no.
Would anyone know what could be the problem that when changes are sent for the first time all items are updated?
[Version: SAP 4.6C/ SAPKH46C48]
Regards,
Neeth

Dear:
The error itself telling you the correction. You profit center which is assigned to your cost center has a validity date less than the one you are now assigning.You can check in KE52 against the profit center assigned to your cost center master data. However the best thing is to go to KS01 and create this cost center with desired validity date.
This will resolve your issue.
Regards

Export PDF Workflow with Applescript and CS3

Hello,
I am setting up some PDF workflow with Applescript.
On a given moment, as my script runs and after getting some user-input answers to questions in some dialogs, my script tells InDesign CS3 to open the Export Adobe PDF window for the current document. I copied and pasted that small part of the script:
tell application "Adobe InDesign CS3"
tell document 1
export format PDF type to "Macintosh_HD:Test01.pdf" using "somePreset" with showing options
end tell
end tell
When you run this small part of my Applescript, InDesign opens the Export Adobe PDF window (as expected) waiting for me to click on "Export". That is exactly what I want, since the user is given here a last opportunity to change some values (for example page range, or spreads). When all is set, the user can click on Export to close the dialog and finish the script.
Problem: I was hoping that the Adobe PDF Preset "somePreset" would be selected in the first pull-down menu of the Export Adobe PDF window when this window is opened by the script. Unfortunately the last used preset is always selected by default. Anyone suggestions or help?
Kind regards,
Bertus Bolknak.

My operators enter the page range and filename into a dialog box. Then I set those in the script. I use the Press Quality preset to start with and then set the changes I want into a export variable. I set things like bleed, marks, page range, etc.
Here is an example:
set theProps to properties of PDF export preset "[Press Quality]"
try
delete PDF export preset "Schmidt PDF"
end try
set theStyle to {name:"Schmidt PDF", acrobat compatibility:acrobat 7, bleed top:"0.125i", bleed bottom:"0.125i", bleed inside:"0.125i", bleed outside:"0.125i", page marks offset:"0.125i", include ICC profiles:Include None, effective PDF destination profile:use no profile, effective PDF X profile:"No Color Conversion"} & theProps
make PDF export preset with properties theStyle
set properties of PDF export preferences to theStyle
set color bitmap sampling of PDF export preferences to none
set grayscale bitmap sampling of PDF export preferences to none
set page range of PDF export preferences to (item i of myPageList) as string
export document 1 format PDF type to (PrinergyFolder & myJobNumFinal & "_" & VerCode & ".pdf") as Unicode text without showing options
I am also doing this in Quark.

Using LOV with Validation on the Numeric Fields results in Error

Dear JHeadstart Team,
During my work with lov I encountered another problem. I defined a lov and attached the lov to a numeric field and check the LOV for validation. Now when I use LOV using the LOV button it works fine but when I enter some numbers and then press tab the LOV was not shown correctly and resulted in the following errors and the worst thing is that you can not navigate to any other pages and all try to navigate to other pages results in errors too. When we put the same LOV on a string field (which is not desirable for us) it worked fine.
It seems to me like a bug. Am I right? Is ther any solution or workaround for this problem?
Thanks in advance,
Navid
16:31:29 DEBUG (LovItemBean) -Cleared value of item HrTrainingCourseSchedulesTitle
16:31:29 DEBUG (LovItemBean) -Cleared value binding #{bindings.HrTrainingCourseSchedulesTitle.inputValue} of item HrTrainingCourseSchedulesTitle
16:31:29 ERROR (ApplyRequestValuesPhase) -java.lang.ClassCastException: java.lang.Long
javax.faces.el.EvaluationException: java.lang.ClassCastException: java.lang.Long
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1079)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:247)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:215)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
     at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
     at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at com.pooya.controller.jsf.PooyaAuthenticationFilter.doFilter(PooyaAuthenticationFilter.java:256)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: java.lang.Long
     at oracle.jheadstart.controller.jsf.bean.LovItemBean.validateWithLov(LovItemBean.java:101)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
     ... 31 more

Hi Navid,
We ran into the same bug and have the next workaround for it:
We extended the JHeadstart class 'LovItemBean' and we have overridden the method 'validateWithLov(...)' with:
public void validateWithLov(ValueChangeEvent valueChangeEvent)
    Object newValue = valueChangeEvent.getNewValue();
    if(newValue != null && !(newValue instanceof String))
      newValue = newValue.toString();
      ValueChangeEvent newEvent = new ValueChangeEvent(valueChangeEvent.getComponent(), valueChangeEvent.getOldValue(), newValue);
      newEvent.setPhaseId(valueChangeEvent.getPhaseId());
      super.validateWithLov(newEvent);
    else
      super.validateWithLov(valueChangeEvent);
}Next step is to use a custom template in your JHeaedstart Application Structure file for 'LOV_ITEM_BEAN'. In this custom template you should use your own class as 'managed-bean-class' instead of the default JHeadstart one.
Now you can safely generate LOV with validation of number fields.
Maybe something the JHeadstart can pcik up in the next release of JHeadstart :-)
Hope this helps.
Pascal

Workflow with validation

Similar Messages

Maybe you are looking for