Workforce planning data not getting copied into the CATs

Dear all,
I am doing the activity confirmation in the project by transferring the data from CATs. However in order to maintain the data in CAT2 we have to copy the data from workforce planning.
currently it is not happening. The data is not getting copied in CAT2.
regards,
sudhir

Hi,
   how about with worklist, these are the options required to transfer the data from PS to worklist.
refer to the period which you have planned in CAT2?
Rgds
Sudhir reddy

Similar Messages

  • Billing Plan Data not getting copied from Contract to SO

    Hi ,
    I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
    Please guide me on how can this be done.
    Regards,
    Madhav

    Hi,
    plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
    you can either use routine-401 or 402

  • The pricing procedure in Sales order is not getting copied into invoice

    The pricing procedure in Sales order is not getting copied into invoice.
    I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
    So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

    Hi
    Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
    Regards
    Srinath

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

  • VAT /CST% manually in the sales order,not getting copied to the Invoice

    Dear Friends,
    If I change the VAT /CST% manually in the sales order,its not getting copied to the Invoice
    Thanks
    Ivy

    Dear Friends,
    Thanks for your valuable inputs....
    I have maintained the condition record for the combination of delivery plant region and the customer  region.......assigned dummy tax code against the Tax condition...therefore I think there wont be any problem in posting billing doc to accounting doc.
    There are different combinations,where sometimes the user is liable for 2% CST ....sometimes 4%CST... but I am able to pick one tax value say 12.5% CST across and maintained the tax condition types - manual entry has priority, as allowed the user to change the value manullay as per the user requirement ....
    Now if i change the Tax condition value in the sales order ,the same is not reflecting in the Invoice....this also is applying from contract to a sales order...
    Please advice me accordingly...
    Thanks
    Ivy

  • DateField not getting copy in the matrix using Datasource & Datatable

    Hello All,
    I have tried to copy data From Purchase Order Tables to my own created User Defined Form matrix columns using DBDatasource & Datatables ,Instead of Document Date all other data are getting copied but that document date field is not
    getting the data plus it is not showing any error message as such.
    Following is the code which i have written :-
    =====================================
    oPurchase_Amend.DataSources.DataTables.Add("oMatrixDT" )
    oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" ).Clear()
    Dim sSQL As String = "SELECT T1.[ItemCode], T1.[Dscription], T1.[Quantity], T1.[Price],(Select InvntryUoM From OITM Where ItemCode=T1.ItemCode) as 'UoM',T1.LineNum,T0.DocNum  as 'FrmDate' FROM OPOR T0  INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocNum] ='1' and T0.CardCode='C0001'
    oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" ).ExecuteQuery(sSQL)
    oMatrix = oPurchase_Amend.Items.Item("mtx_0").Specific
    oMatrix.Clear()
    Dim oDBDataSource As SAPbouiCOM.DBDataSource = oPurchase_Amend.DataSources.DBDataSources.Item("@OSL_POAMD")
    Dim oDataTable As SAPbouiCOM.DataTable = oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" )
    oDBDataSource.Clear()
    For row As Integer = 0 To oDataTable.Rows.Count - 1
    Dim offset As Integer = oDBDataSource.Size
    oDBDataSource.InsertRecord(row)
    oDBDataSource.SetValue("U_ItemCode", offset, oDataTable.GetValue("ItemCode", row).ToString())
    oDBDataSource.SetValue("U_ItemName", offset, oDataTable.GetValue("Dscription", row).ToString())
    oDBDataSource.SetValue("U_UoM", offset, oDataTable.GetValue("UoM", row).ToString())
    oDBDataSource.SetValue("U_OldQty", offset, oDataTable.GetValue("Quantity", row).ToString())
    oDBDataSource.SetValue("U_OldRate", offset, oDataTable.GetValue("Price", row).ToString())
    > Line For Copying Document Date Data to the matrix datasource
    oDBDataSource.SetValue("U_OldDate", offset, oDataTable.GetValue("FrmDate", row))
    oDBDataSource.SetValue("U_LineId", offset, oDataTable.GetValue("LineNum", row))
      Next
    '--- Rebinding the datasource to the matrix columns -
    oMatrix.Columns.Item("col_0").DataBind.SetBound(True, "@OSL_POAMD", "U_ItemCode")
    oMatrix.Columns.Item("col_1").DataBind.SetBound(True, "@OSL_POAMD", "U_ItemName")
    oMatrix.Columns.Item("col_3").DataBind.SetBound(True, "@OSL_POAMD", "U_OldQty")
    oMatrix.Columns.Item("col_5").DataBind.SetBound(True, "@OSL_POAMD", "U_OldRate")
    oMatrix.Columns.Item("col_7").DataBind.SetBound(True, "@OSL_POAMD", "U_OldDate")
    oMatrix.Columns.Item("col_9").DataBind.SetBound(True, "@OSL_POAMD", "U_LineId")
    oMatrix.LoadFromDataSource()
    But i am not able to get the document date in the column of the matrix .
    Please suggest what changes i have to meke in this code to get the desired output.
    Thanks & Regards,
    Amit
    Edited by: AmitSharma_061985 on Dec 17, 2009 12:24 PM

    Hi Michael,
    FrmDate is the Document date of the purchase order which i am fetching through sql query and trying to copy that in the matrix
    through datasource .
    Edited by: AmitSharma_061985 on Dec 18, 2009 7:07 AM

  • Sub items are not getting copied into excise invoice

    Hi Guru's
    I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
    I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
    When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
    When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
    Kindly suggest me how can I copy subitems into excise invoice from billing document.
    Thanks & Regards.
    Swamy H P

    Hi Lakshmipathi,
    Thank you so much for the response.
    Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
    I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
    But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
    I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
    Thanks & Regards,
    Swamy H P

  • Purchase Requisition Price "valuation Price" is not getting copied into PO

    Hi MM Expert,
    we are facing a problem with PO price not getting copied from PR, our Client dont want to maintain the Info record as material they are using is generic (general, not specific or special),  so is there any way or configuration setting so the PR price get copied into PO
    Please help me to come out from this issue
    Thanks in advance
    Priya

    Hi,
    Yes there is a way to fix this.
    Please follow the steps below.
    1) SPRO --> MM --> Purchasing --> Authorization Management --> Define Function Authorizations for Buyers
    2) Maintain 01 function authorization or copy it to create a new one
    3) Under General Parameters, Check Adopt PO Price.
    4) If you would like PO to have reference objects as mandatory, uncheck W/o Reference Optional
    5) Go to each buyers ID by SU01 --> Parameter. Enter EFB and enter the 2 codes that you defined in Step 2.
    6) Log out then log back in
    Now with that ID, when you create PR, under valuation, you have a new drop down button asking whether you would like to adopt the price in PO.
    Hope this helps.

  • Confirmation control key not getting copied into PO created via ME59N

    Hi,
    I  have maintained confirmation control key 003 in vendor master. Ticked automatic PO in vendor master as well as material master.Info record & source list (Fix vendor) are also maintained.
    I have manully created PR & assigned source of supply. Now when I am trying to convert PR to PO via ME59N, confirmation control key is not getting copied from vendor master.
    Note that I have not maintained CC key in info record. When I am creating PO manually wrt PR, CC key is getting copied from vendor master.
    What could be the reason?
    Regards,
    Piyush

    Hi Piyush,
    Incase of Automatic PO creation /conversion of PR to PO automatically. Purchase info record is must along with the activation of CC Indicator (because PIR is a master record with the combination of vendor and for a certain material) to pull the CC key into the PO automatically.
    Hence CC activation in PIR is required inorder to populate the Confirmation control key into the PO when it creates through Automatic PO with PR assignment using ME59N. Otherwise you have to specifiy manually incase of manual creation of PO.
    Hope it clarifies,
    Regards,
    Sapsrin

  • Contract data not getting copied for service ticket follow up complaint.

    Hi Experts,
    We are creating a complaint as a follow-up document to service ticket . But the contract data is not getting copied.
    We contacted SAP and they told us that its a standard behavior .The reply is basically an SAP note
    841830 - Contract data not copied to follow-up transaction
    My question is is there a way to change this behavior using CRM_COPY_BADI ?
    I tried to look for the method which I can implement to get the contract data in items, But I was not able get it .
    Please suggest the way to get it working
    Thanks in advance .
    Naval

    Please not that the contract determination works fine when creating a new complaint ... but when the I am trying to create a complaint from service ticket the item level contract determination is not working fine ...
    We have configured that the contract should be determined at the item level only option `F`.
    I checked in one of the sap document that this cant be achieved by standard .
    http://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htmhttp://help.sap.com/saphelp_crm70/helpdata/en/46/5cd7335bbd516fe10000000a114a6b/frameset.htm
    Is there a way we can put this code in the BADI eg; CRM_SERVICE_CONTRACT ?? Please note that there is already an implementation of CRM_SERVICE_CONTRACT which is working fine for new service document creation .

  • Data not getting copied

    Dear All,
    When we do j1iin & create Exc Inv with ref to Bill Doc the whole data from Bill Doc gets copied into Exc Inv. But when we do j1is with ref to G2 no data gets copied. Is it the std scenario? Or how can we make data copy from G2 to Exc Inv.?
    Rgds.

    It is Standard. to do an adjustment against Credit / Debit Memo, pass an Excise JV through Transaction Code: J1IH.
    Regards,
    Rajesh Banka

  • Data not getting uploaded in the AQ table.

    Hi All
    We have one issue with the AQ tables.
    The scenario is like we first send data from Oracle to SOA and then to a third party tool.
    For this we first populate data in one custom payload table and then in to one custom AQ table.
    Now the data is getting updated in the paylaod table and XML is getting generated, but it is not getting interfaced to the third party tool.
    Reason : Data is not getting populated in the custom AQ table from where SOA picks the data and interfaces it ti the third party tool.
    Error is a custom one :
    While equeing the data using the below statement
    l_chr_corrid := p_in_event.getvalueforparameter ('CORRID');
    since the CORRID Id is null it gives us the message :Correlation ID has not been set for the payload.
    Part of the code for setting WF parameters :
    l_chr_corrid_val := l_chr_event_name || '.order';
    wf_event.addparametertolist (p_name => l_chr_corrid_name,
    p_value => l_chr_corrid_val,
    p_parameterlist => l_param_list
    l_local_event.setcorrelationid (l_chr_corrid_val);
    l_chr_rule_ret := wf_rule.default_rule (p_in_subscription_guid, l_local_event); -- Returns success
    This is quite urgent , hence kindly help us find a sollution to this issue.
    Thanks in advance
    Trupti

    Looks like you havent populated the correlation id. To make sure this is unique use the conversationID, or GUI, etc.
    Not sure what version you are on. If 10g look at this note (obviously chnage from file to AQ, concept the same):
    http://middleware1.wordpress.com/category/adapters/page/2/
    If 11g you should be able to see the property when you edit the invoke activity, there is a tab called properties.
    cheers
    James

  • We rented a movie from Apple TV, had to pause it, accidentally pressed the search button on remote, could not get back into the movie, apple said 'go to settings, downloads, look for the movie', yeah, right, there is no 'downloads' selection under setting

    wow, this is taking forever to communicate with anyone, I just want my $4.99 back from the movie rental I paid for. I paid for a rental, we were watching it, had to pause it, accidentally hit 'menu' on the apple remote, tried to get back into the movie, wouldn't let us, apple said ' go to settings, click downloads, select the rented movie from there',( not really a quote, but, close enough).  So, we went to 'Settings' on main menu, but, there is no 'downloads' icon....I guess it is true:  Do Not Rent from Apple TV'.
    Fiona

    Welcome to the Apple Community.
    You are looking at outdated instructions, you can find the "check the downloads" option under settings > iTunes Store. You may also wish to look on the movies > rentals.

  • Batch Classification data not getting updated during the GR of the PO

    Dear Gurus,
    While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N  reads the information directly from the
    reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
    Sumit Mohan

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Data not getting inserted into oracle with theAutoCommitEnabled not checked

    Hello Experts
    I have a proxy to JDBC scenario.I have 3 SQL statements and the Format is
    <DeleteStatement>
    <InsertStatement>
    <CallStoredProcStatement>.
    While excecuting with the AutoCommitEnabled box checked, the insert statement is excecuting and the data is getting updated in the oracle database..But the CallStoredProcStatement is not excecuting.
    If the AutoCommitEnabled box not checked,the data is not getting updated in the database .but in RWB log all the SQL statements are getting executed successfully.
    Are there any other configurations still to be made in the JDBC adapter.

    Hi,
    Why you not using single SP to handle all the queries?
    BTW, have you used the parameter "logSQLStatement = true" in JDBC receiver channel? It will show in audit log what query is being executed.
    Regards,
    Neetesh

Maybe you are looking for