Working with an updatable column

Hello,
I have an updatable column that is being displayed as a textfield. I correctly set the reference table and column name under the column attributes and the report is generated by an updatable SQL query. I'd like for the user to change the data (it's a simple NUMBER) on the report and then be able to have the change on the database.
I tried to create a Multi-Row update but it didn't seem to be working correctly. Could someone point me to, or shed a light on, a PL/SQL process or Multi-Row update that could correctly update the altered rows in the database.
Thanks!

Ted,
You're probably best of creating this as a tabular form using the tabular form wizard. This generated the tabular form / updateable SQL query for you, along with all the needed primary key column(s), etc and created the MRU process as well. Of course you can also created this manually, just make sure your column names in your query correspond with the actual column names in the table you're trying to update. You have a primary key column, and reference that primary key column and the table properly in your MRU process.
Regards,
Marc

Similar Messages

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders

    I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders app for the COMPUTER that is more user friendly?

    sgreenie,
    If you are willing to wait, Apple - OS X Mountain Lion - Inspired by iPad. Made for the Mac explains that a "Reminders" application will be included in the next release of OS X.

  • HT1338 where is the update for aperture to make it work with the updated os x yosemite

    where is the update for aperture to make it work with the updated os x yosemite

    The currently sold version of Aperture at the AppStore, Aperture 3.6 is compatible with Yosemite. 
    See the Release notes: Aperture 3.6 Release notes
    If you are running any version of Aperture 3, you should be able to update to this version.  Does the update not show for you?
    The update has been shown automatically for those who had upgraded from Mavericks and been running Aperture 3.5.1. Other users, who skipped Mavericks and Aperture 3.5.1 have reported problems to get the update to show and needed to contact the AppStore Support. The update did not show, if the users tried to update from an earlier version.

  • I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

    I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

    Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
    My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

  • Playing Slowmotion video over airplay does not work with ios update!!!!!

    after upgrading last ios , airplay to shoot slowmotion video does not work.
    I was expecting it to be fixed with recent update, but still not working!!!
    I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
    or apple should give downgrade option at least.
    FIx it, fix it, fix it!
    Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i  am quite disappointed with my purchsing ipad air 2.

    As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
    It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

  • HT1454 iphone 4, composite cable no longer works with ios6 update

    I have the iphone 4, and I used an apple composite cable to watch youtube, videos, etc on my TV through an AV input. But when I upgraded from IOS 4 to IOS 6, it no longer works. Says something along the lines of "accessory not supported" or close to that. The iphone used to go into a display mode, where nothing shows on the phone's screen, and everything shows on the TV. But now it doesn't even do anything but give me an error message. Any ideas?
    In sum, it worked before, but updated, and now no longer works.

    It was the cable connector seating.
    It looked fully attached, but on removal and FIRM attachment it worked.
    If the AV iPod connector is not fully seated you get this error. The old iPod connector used a locking connection with a positive click, the AV cable uses a lockless connector that differs from the newer lockless iPhone connector. I suspect the AV cable connector was a transitional design that may have more connectivity issues.
    Message was edited by: jfaughnan

  • DVD player does not work with latest update

    I installed the latest update 10.8.2 and now my brand new Superdrive will not work with new MacBook Pro Retina display.  When I plug in Superdrive and try to start a DVD, it say "DVD quit unexpectedly......"   Took to Apple store and they said it was latest update.  Anyone else with this problem?

    Dear all,
    Perhaps you found out yourselves but the latest Software Update, called OS X Mountain Lion 10.8.2 Supplemental Update, solves this issue. I recommend you install it and restart your Mac.
    When you insert a DVD in the drive and DVD Player launches, you will be prompted to confirm the region encoding (1, 2, 3, 4 or 5, based on the encoding of the DVD you are about to play). This is normal, and you should confirm it again, even if you did it previously.
    Naturally, if most of your DVDs are encoded for one region and you want to play a disc encoded for another region, please remember you may make a limited number of region changes when you play other DVDs, and the last one will be permanent. So, act with caution and sensibility.
    Alessandro

  • Bluetooth in Subaru still not working with ios update

    Bluetooth is still not working in my Subaru with my iphone 6.  I've updated the iOS to 8.1, done most of the suggested tips I've read on line and my phone will still not find my car's (or my plantronic headset).  Bluetooth does work with my jawbone speaker, but that's it.  I'm looking for any new suggestions. Thanks

    I just sold my Motorola RF-850 that was hooked up to my GTO today because it wasn't working with my IPhone.
    I can't believe you paid for the Holden one.
    Anyway good luck.
    AcePilot

  • Working with FOR UPDATE

    Hi,
    i have 2 session(A, B) and trying to execute sql statement with For update clause
    Session A
    select * from emp where empid in (10) for update nowait;
    Session B
    select * from emp where empid in (10, 20) for update nowait;
    my question is after executing select statement in sessin B will oracle locks
    empid =20 or it will ignore the lock as part of it (empid=10) is already locked by
    session A.
    Can anyone plz help me in this..
    Rds,
    Naga

    Why not try it out?:
    Session A:
    SQL> select empno,ename from emp where empno in (7788) for update nowait;
         EMPNO ENAME
          7788 SCOTTSession B:
    SQL> select * from emp where empno in (7788,7900) for update nowait;
    select * from emp where empno in (7788,7900) for update nowait
    ERROR at line 1:
    ORA-00054: resource busy and acquire with NOWAIT specifiedSesson A again:
    SQL> select empno,ename from emp where empno in (7900) for update nowait;
         EMPNO ENAME
          7900 JAMES

  • Nano no longer works with iTunes, Updater

    I got my nano, hooked it up, put music on it, everything worked fine. I was showing my wife how the photo bit worked and the screen went all black pixels and froze. I did a reset and now I am stuck with what I have on the thing. Windows sees the iPod, but neither iTunes or the updater can communicate with it. I have uninstalled and reinstalled, I have tried on other computers as well, no luck. Come on man! Now I get to send it back and wait for another one, you would think for $250 these things would work a little better. Anybody else have this problem?

    Welcome to the forums!
    Is there an Apple store near you? If so I would go there and meet with their Geniuses <sp>. They can help you sort it out. If they find that the iPod is truly broken they may just offer a replcement on the spot.
    The only suggestion I can offer is to switch the hold switch off and on a few times and do the reset again. Sometimes that will work when just a simple reset will not. Reset is the menu and center button at the same time.
    I know how it feels to be unlucky with a new gadget. Have to keep in mind that they have made millions of these and a few will have problems.
    Regards
    Yosam

  • Menu bar no longer working with IE update

    With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them.  From my vista machine it is OK but from my XP machine it does not show as being a link. The submenu's however do still work, here is the code, the first line is from the main menu and doesn't work, the 2nd line is a submenu and does work.
    Here is the site www.conundrumadventures.com
    From the main menu this is the code for "Adventures":
    <td id="002" class="link4" onclick="location.href='Teambuilding-Exercises-Adventures.php'"; onmouseover="changeC('002','link4h');" onmouseout="changeC('002','link4');" >Adventures</td>
            </tr>
            <tr>
    From within the adventures page here is the code for the submenu for  "Conundrum Metro":
              <td id="303" class="Sublink4" onclick="location.href='Outdoor-Team-Building.php'"; onmouseover="subchangeC('303','Sublink4h');" onmouseout="subchangeC('303','Sublink4');" >Conundrum Metro</td>
            </tr>
    Any ideas how to fix the main menu bar?
    Thanks
    Lynn

    I recommend doing away with your mouseover/mouseout links and convert to using Cascading Style Sheets.
    Here is a link to CSS tutorials: http://www.adobe.com/devnet/dreamweaver/css.html
    You don't say whether you are using Dreamweaver CS4 or an earlier version, but even if you are using that earlier version, you can type the code in yourself. Look especially at the tutorial chain "Designing with CSS", as there is a module that talks about a menu bar and how to make the links.
    Best wishes,
    Beth

  • Crashing/not working with latest update on Android

    I have installed the latest version of app on my Android phone and managed to log in and set everything up fine but there are now a few problems:
    1) Nearly every time I open the app the notification icon (which was supposed to not show anymore) shows for a second then I get returned to my home screen.  I open the app again and it does the same but eventually after opening/crashing it does work but can sometimes take 6 times before it actually stays open! (I've cleared cache, cleared data, rebooted phone etc.)
    2) I've tried making calls with wifi and 3g (and also tried with wifi in airplane mode) but it always says 'call failed'.
    When I run the test connection option it takes ages then says 'connection test failed, sorry but there's a problem with the BT SmartTalk service, try again later'
    I've checked the service page and it doesn't report any problems!
    I can live with the first problem although it's annoying but the 2nd problem is preventing me from actually using the app!

    My dad also updated the latest version and he also cannot make any calls

  • Keyboard repeating not working with latest update for mac?

    I just updated my Macbook Pro with a new version of Yosemite and i have come to find that the keyboard repeating function is not working anymore, even with the command: defaults write -g ApplePressAndHoldEnabled -bool false
    in terminal.
    Is there anyway to resolve this? I find the other character extremely annoying that they always pop up
    thank you!

    The repeating function you want has been off by default since 10.7 was released 3 years ago.  That terminal command should normally do the trick.  Did you logout and login again?

  • I changed my appleID and primary email and now I can not access anything. iphone shows my old appleID and I can't log in with my old password but I can not log out and log in with new ID. How do I get iphone to work with my updated ID?

    My old nternet account was cancelled and with it my emails. I updated my apple id and password in all my devices (ipad, iphone, imac, except for my moms iphone. I am trying to log out from my old account and set her up with her own apple ID and iCloud etc but it does not let me log out. I have a notebook with all my passwords in it so I know for a fact the password for the old ID/ email is correct yet a window keeps popping up that it is incorrect. I have spent hours reading and trying to fix it myself and nothing is working, same window keeps popping up. Any ideas on what to do? I have an iphone 4S, all software up to date and I made sure my moms phone is also updated. Thank you, any help is greatly appreciated.

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

Maybe you are looking for