Working with the BEA AquaLogic BPM Suite

Dev2Dev has just published an article:
Working with the BEA AquaLogic BPM Suite
http://dev2dev.bea.com/pub/a/2006/09/aqualogic-bpm.html
"Learn how the BEA AquaLogic BPM Suite can integrate business process management with existing infrastructure, including Web services, WebLogic Integration, and the AquaLogic Service Bus."
Check it out. If you'd like to write for Dev2Dev, please contact me!
Regards,
Jon
Jon Mountjoy - Editor, Dev2Dev - http://dev2dev.bea.com/pub/au/13

Hi Guys You solved my problem. The working code is:
TaskInstanceManager taskInstanceManager = createTaskInstanceManager();
DataObject taskOutput = taskDetail.getOutputDataObject();
DataObject output = taskOutput.createDataObject(0);
output.setBoolean("Approved",getApprove());
taskOutput.set(0, output);
taskInstanceManager.complete(getTaskId(), taskOutput);
Thanks for helping!
Best regards
Johannes
Edited by: jtrebess on Nov 21, 2011 9:12 PM

Similar Messages

Will nokia 301 work with the old PC suite?

Hi,
I am planning to buy Nokia 301(Dual sim varient),
i am more concerned about Nokia PC suite connectivity over blue tooth (PC suite -(v.7.1.180.94) and Not Nokia suite).
Can you please tell will nokia 301 work with the old PC suite or not.?
and btw is your Nokia 301 a dual sim variant or single sim ?
Moderator's note: We have amended the title of this post and its replies as they were moved from another thread.

noreport wrote:
Will Nokia 301 work with the old PC Suite?
Yes. For details, there you go …

Will Non-DSA Simultaneous Cards (such as the 9220) Work with the Electrical Power Suite?

Hello, All!
I wondered if the 9220, and other non-delta-sigma (DSA) c-series modules, will still work with the Electrical Power Suite. From the overview on the product page:
Supported Hardware
C Series Modules
-The suite meets standard accuracy requirements when used with the NI 9225 (high voltage) and NI 9227 (5 A current) C Series modules.
-Compatible modules include any self-timed delta-sigma module such as the NI 9229, NI 9232, NI 9234, and NI 9239. Due to the lower voltage inputs, these modules require external voltage transformers.
-The resampling algorithms of the LabVIEW Electrical Power Suite are not designed for multiplexed modules, such as the NI 9201 or NI 9205.
Note that a few modules are listed explicitly, and it sounds like any self-timed delta-sigma module (eg the 9229, 9232, 9234, 9239) will work appropriately, and that multiplexed modules (eg 9201, 9205) will not work. However, what about non-DSA simultaneous cards such as the 9220? Note also that supported hardware is not explicitly listed in the 2012 EPS Readme, so I wanted to check.
Please let me know!
Will Hilzinger | Switch Product Support Engineer | National Instruments

[originally posted 7-19-2013]
Hello, Fang!
Thank you for the information! The question is from a customer who is an Alliance Partner. They don't have to use the 9220, but would very much like to. Please let me know if you have any further questions for me, and thank you again!
Best,
Will H | Applications Engineering | National Instruments
Will Hilzinger | Switch Product Support Engineer | National Instruments

Transfer value from global automatic activity in Aqualogic BPM Suite

Hi, I am new to Aqualogic BMP suite and stuck with the following problem :
In aqualogic bpm suite, if we are setting some values to some variables in a global automatic activity in a process how to get those values back in some other activities (say an Interactive activity) in the same process or how to assign the values to some instance variables in the Begin activity ??
We have a scenario where we are creating some process instances from the Global Automatic activity using the following :
args["name"] = abc
create ProcessInstance using parameters = args
Now how to get the value "abc" and assign this value to an instance variable in the Begin activity(/access the value "abc" in an interactive activity)within the same process.
Thanks,
Suman.

Hi,
Let's say you have an Argument Set defined in your Begin activity called BeginIn. The arguments in this Argument Set can be "a", "b" and "c" of type String, Int and boolean accordingly.
If you want to use the ProcessInstance.create method, then you would need to have a PBL script like this one:
args[] = [ "a" : "SomeStringLiteral", "b" : 1234, "c" : true ];
ProcessInstance.create(processId : "/MyProcess", arguments : args, argumentsSetName : "BeginIn");
HTH,
eduardoc.

Nokia 6124 classic wont work with the USB Data Cab...

Hi all,
I'm trying to connett Nokia 6124 classic but its not working with the USB Data Cable. Is there a way to fixing it yourself?
Thanks
Jonathan 'Jonnie'

You should install the drivers first before connecting your phone. Drivers are bundled in with pcsuite/ovi suite which can be downloaded from here.

Will InDesign4 work with the newest MAC operating system -- OS10.9 I think.

Will InDesign4 work with the newest MAC operating system -- OS10.9 I think. My OS crashed and they have to wipe the computer to put on a new system. I don't want the latest system if it won't run CS4. I bought Creative Suite Cloud version and had nothing but problems with it and the system I was running. In fact all the problems with my computer started just after I put CS Cloud version on it.

Thanks for answering. I'll try to be more specific in my question.
Steve Werner <[email protected]> wrote:
Steve Werner created the discussion
"Will InDesign4 work with the newest MAC operating system -- OS10.9 I think."
To view the discussion, visit: https://forums.adobe.com/message/6587879#6587879
>

Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
Message was edited by: john.rm

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

What docking station works with the ipod touch 4th generation?

What docking station is works with the ipod touch 4th generation? We have a Bose docking station which I'm having trouble getting it to fit onto.

Gal:
I'm not exactly clear what your question is.
How does the system you have been given not work with your iPod? What is the problem?
What is your point about the 4th generation adaptor? The "adaptor" is merely a physical piece of plastic that sits in the Docking Station's dock and creates the exact shape for your model of iPod to fit snugly into it. So a 1st or 2nd generation iPod would not benefit in any way from a 4th gen adaptor.
Are you trying to find a portable iPod Docking Station that works without mains power?
You said: " the customer service agent said it would make the iPod fit, but it wouldn't charge or play music." What is your point about charging the iPod? I don't understand what you are trying to say. I presume that the system you've been given does charge a 1st and 2nd gen iPod.
The product you linked to looks portable to me. So why does it not suit your needs, is this about using it out in the garden (my question 2)?
Less complicated in what way? What exactly are you finding complicated? Simply place the iPod into the Docking Station and (presumably) select the iPod input and press play.

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issue

i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapte

Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapter and the new MacBook Pro?
Apple Store says it is for the 30" only.
Thanks ... Ken

I'm not so sure about that. I'd say the jury's still out until someone gets one and tries to use it single-link.

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

Working with the BEA AquaLogic BPM Suite

Similar Messages

Maybe you are looking for