Working with virtual host & hosts files on a local network

I'm setting up a small local web and production server here in my office running Leopard.
I'm setting up virtual hosts for users on the network to review and comment on websites in development. Ideally they'd access it as:
host1.webserver.local
host2.webserver.local
host3.webserver.local
Problem is, users on the network can see webserver.local just fine, but the subdomains need to be registered with hosts file on each computer.
Is there a way I can manage all computers hosts file easily? I was thinking of an SVN repository, but this still requires going to each computer to update the file.
Any suggestions here would be great.
Thanks
Rich

Hi jscher2000
Thank you for your interest.
I am using "manual prxoy configuration" option in firefox with port 8080. I have tried the option of "Use system proxy settings" but it doesn't help.

Similar Messages

Difficulty with Virtual Named hosts on Web Ser

I am having a difficult time with creating Several Virtual Named Hosts with Apache2. I am trying not to use the Apache Manual modifications to the config file, sothat I can stil manage cia Server Admin. I am running OSX 10.5.2 and have several domains registered . Additionally I have a DNS Server running on the Xserver the primary zone is yadayadayada.com with zone as follows;
yadayadayada.com. Primary Zone
www.yadayadayada.com. ALIAS yadayada.com.
machineyada Machine 74.11.11.11
HomePage Service machineyada.yadayadayada.com:80
I have reverse Zones, and a Secondary zones setup for my DSL Service provider and my Domain host. I have two DSL Lines setup using a Cisco router , the cisco router provides DHCP , and multiplexes the two DSL lines to share bandwidth.
the web is setup as follows;
Domain_Name Address Port
* 80
yadayadayada.com. * 80
yadayadayada1.com * 80
I dont have Realms setup and all other Web config parameters are set as default
my name servers are registered , and have propagated verified by a nslookup. I have them setup to point to the same phydical server using the multiplexed ip adresses i.e.
ns1.yadayadayada.com 74.11.11.11
ns2.yadayadayada.com 74.11.11.12
when I browse to either www.yadayadayada.com or www.yadayadayada1.com I get the default website, when the default web is deactivated i receive server not available .
According to the documentation once you have a unique domain name and a Zone for that domain you should be able to host multiple Named Virtual hosts, however after explicitly following the "Vague" directions I am still not able to get the configuration to return the correct sites. does anyone have any experiance with Virtual Named hosts, or must i resort to the Apache Docs ?
Thanks for the assistance in advance.

Obfuscating the domain name often leads to confusion - for example are errors introduced via typos in the obfuscation?
Given the information that you've posted, your DNS isn't setup correctly.
You're trying to access 'www.yadaydayada.com', but you don't have any 'www' record in your 'yadayadayada.com' zone file. However, since you seem to get a response from the web server clearly you have some kind of additional DNS setup that you're not posting here.
In any case, as far as Apache is concerned, there is no relationship between 'yadayadayada.com' and 'www.yadayadayada.com'. They are two completely different hostnames and I wouldn't expect Apache to serve yadayadayada.com's web site when you're trying to access 'www.yadayadayada.com'. You'll need to either assign a server alias for the other domain, or add an additional Virtual host for 'www.yadayadayada.com' (and make sure the DNS points to the right place, of course).

Will iweb continue to work with other web host after june 2012

will iweb continue to work with other web host after june 2012

as long as osx supports it, iweb should work beyond june 2012 as an app by itself.
however, the some of the currently published code will break when mme servers are to shut down; unless apple comes up with a patches by then.
most of mme features can be replaced and fully implemented on other host servers.
Password protection
can be implemented with apache server.
Blog and photo comments
with Intense Debate commenting system, ex:
http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12_Dynamically_Resize _iFrame.html
no need for manually resizing iframe.
if you have comments on mme servers and value them then you should find ways to archive them, because they'll be gone:
https://discussions.apple.com/message/15528258#15528258
Blog search
with google search, as long as your site is indexed with google search engines.
Hit counter
with statcounter and can have the same look as mme hit counter:
http://home.cyclosaurus.com/Cyclosaurus.html
as for photos page's popup slideshows, everything can be packaged in an installer so there is no need for editing, find+replace of anything.
if i feel good i just may release my installer for iweb slideshow patch.

Cant work with 32 bit image files?

Hi there, I am unable to work with 32 bit image files on our cs6 ? I am fallowing a tutorial and a person creates a new file with 32 bit channel selected from dropdown menu, and starts painting on it he is using CS5. When I create a 32 bit file and select the brush tool, it comes on with circle and cross line and error comes up saying that the brush tool is not supported with 32 bit image files, in fact, I cant use any tools on the 32 bit images, I can't even create a new layer on the file. There is one thing I can do, which is a great feature, I can save it! But it's not much of a use now is it? If the image is plane white sheet. Is this a special feature that you need to purchase seperetly? Could you please advise. Regards

Hello again,
so resetting the preference file makes no difference to the problem.
I checked 6 of our macs. 3 of the macs can create the 32 bit images and allow paint and other tools with no problem. Jet the other 3 macs have the same problem as I have. I checked my 2008 macbook which has CS5, and it can also edit 32 bit files. Checked my PC yesterdey which has CS6 installed, can't work with 32 bit image files.
I find this very odd, some work and some don't. Any suggestions would be great. Please also find a screenshot of the mac with the issue.
Kind regards,

Work with ADF Library jar file

Hi
My English isn't very good
I use jdeveloper11.1.1.3.0
I want to work with ADF Library jar file.
I created two generic application. In each application I have a View Obj(one for employees table and one for department table ) and added them to App Module,
then I made a ADF Library jar file for each application: adflib_emp, adflib_dep
Then I created two separated application and in each application I created a BTF .
In emp_TF1 I added adflib_emp jar file to application and in dep_TF2 I added adflib_dep jar file to application.
These two applications work well. Then I created ADF Library jar file for each of these applications named: adflib_TF_1 and adflib_TF_2
Finally I designed a main page to use these two jar file(adflib_TF_1 , adflib_TF_2). I added thses two jar file to application and then I dragged and dropped each TF to main page as a region:
<af:panelSplitter id="ps1" splitterPosition="500">
<f:facet name="first">
<af:region value="#{bindings.emp_TF1.regionModel}" id="r1"/>
</f:facet>
<f:facet name="second">
<af:region value="#{bindings.dep_TF2.regionModel}" id="r2"/>
</f:facet>
</af:panelSplitter>
When I run main application both TF show employees table, but one TF should shows department table and the other one should shows employees table.
I read oracle document and created my application on base of it. But I don't know why this happen and how to solve it?
Habib
Edited by: Habib Eslami on Apr 7, 2013 8:46 PM

Hi,
most likely the names of the application modules are not different but the same, which means you have a naming problem. Application modules (if they should be used as is) must have a unique name
Frank

[svn:fx-trunk] 5802: Fix ant asdoc target to work with the new manifest files.

Revision: 5802
Author: [email protected]
Date: 2009-03-31 09:14:44 -0700 (Tue, 31 Mar 2009)
Log Message:
Fix ant asdoc target to work with the new manifest files.
QE Notes: None.
Doc Notes: None.
tests: checkintests
Modified Paths:
flex/sdk/trunk/asdoc/build.xml

Thats good news.

Will there ever be an upgrade for Lightroom 3 that will work with Nikon d800 NEF files?

Will there ever be an upgrade to Lightroom 3 that will work with Nikon D800 NEF files?

Why not use Lightroom 4 instead?
I mean, assuming you can get it running fast enough, you'll usually get better results with PV2012 - right? And in the cases where you prefer PV2010 (if there are any), it's there too...
R

Premier Pro CS4: working with an Adobe Photoshop file

I'm trying to work with an Adobe Photoshop file, it has many
layers and I imported it as one and switched it to RGB. However, the rendering time for the file is flabbergasting:
it's a 5 second opening with light effects and it takes about 30 minutes to render. Is there something wrong that I did when exporting it or is this
just the "name of the game"-I have applied several light effects to it but have done so to other file in the past and rendering time has not been nearly this long. Many Thanks in
advance.
Tim S.

Hello All,
Thank you everyone for the responses; I think it was:
My Sequence settings were for a 720 project but the Photoshop file well exceeded that-kind of simple but I don't use Photoshop often enough. I changed the pixel settings, Thank You Bill, of the Photoshop file and it seems to have done the trick. I was baffled because even a very low res JPEG was giving me trouble.
Many Thanks,
Tim S.

Does Creative Cloud work with InDesign and linked files?

Does Creative Cloud work with InDesign and linked files?

This will work for online storage.
The preview you will see on the website but will be what you see on your desktop if the the folder was missing. If you want someone else to be able to see a preview online to give comment feedback you could export out a PDF file of the work-in-progress and upload it.
If you just want to work on the project at different locations it might be easier to zip up everything into a single file and upload it. Then download it onto the computer where you want to work and unzip it.

New Keynote will not save files to our local network.. help?!

The new version of Keynote will not save files to our local network at work and keeps telling me I don't have permission to save on our network. I can save to my desktop no problem. I am working on Mavericks and the latest edition of Keynote.
I have permission to acess all files and it doesnt happen with any other programmes im working in.
Any ideas?! It's driving my crazy.
Thanks

This discussion forum deals with Final Cut Pro, Apple's editing application for video.
Try posting in the MacBook area:
http://discussions.apple.com/forum.jspa?forumID=1167

Unable to share files over the local network, OS X Lion

About two weeks ago, my coworker and I realized that we were no longer able to share files over the local network. We have not made any changes to our preference settings. We are able to access FileMaker Pro databases files located on another computer in our office via the network, but we are unable to access any other files by trying to login to the computer remotely. We also have internet access. I am able to login to each of our work computers form home, but not from the office. I'm am not sure what has changed, but it is important that we have the ability to share files at work. Can you give me directions on how to fix our problem. Thanks!
Debbie Roberts
Univesrity of Texas at Austin

I had this problem when I first setup my Mac. One thing I know is that File Sharing in System Preferences doesn't necessarily need to be on, because iTunes does all of the networking itself.
I know that you've checked and checked again on the firewall, but what I did was turn the firewall on. In the list of ALLOW, there should be a line that is labeled iTunes Music Sharing. Check it. It was the magic link, and all of my iTunes libraries on the three computers in the house (two Windows, one my Mac) could "see" each other.
Turning on the firewall might seem strange, but it worked for me.
I hope this helps.
MacBook Mac OS X (10.4.9)

Http tunnelling not working with virtual host

Hi,
We have recently migrated our application from OC4J server to the Weblogic 11g server. There is one EJB client module which connects using t3 protocol. We are trying to use Http Tunneling for it. The server setup consists of two machines (machine1.global.com and machine2.global.com) in clustered mode. A virtual host cbs.global.com is configured to load balance across the above 2 two machine. Also Apache HTTP Server plugin is used for handling the web tier.
For enabling tunneling, we have checked the 'Enable HTTP Tunneling' check box in the server. Also in the Httpd.conf file, we have added a block for
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
If we give the initial context url as http://machine1.global.com:7005 or http://machine2.global.com, then it is working fine. But when we give the virtual host names - http://cbs.global.com or http://cbs.global.com:7005, it is not working. This application needs to be accessed outside the company network, so we cannot directly give the machine names and have to make it work using virtual host.
Please advise whether any other settings need to be done for enabling the tunnelling for virtual hosts.
Highly appreciate your help in this regard.
Best Regards,
Jaison
Edited by: user13152776 on Aug 29, 2011 7:00 PM

Thanks Peter for the reply.
We are having multiple managed servers configured to multiple ports - 7003, 7005, 7007, etc. Please find below the mod_wl_ohs.conf file
# NOTE : This is a template to configure mod_weblogic.
LoadModule weblogic_module "${ORACLE_HOME}/ohs/modules/mod_wl_ohs.so"
# This empty block is needed to save mod_wl related configuration from EM to this file when changes are made at the Base Virtual Host Level
<IfModule weblogic_module>
# WebLogicHost <WEBLOGIC_HOST>
# WebLogicPort <WEBLOGIC_PORT>
# Debug ON
# WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/weblogic.log
# MatchExpression *.jsp
# Dev Cluster Configuration - Port 7003
<Location />
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
<Location /intApp>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
# Ocean Cluster Configuration - Port 7005
<Location /CQS>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7005,nooslux051d.gl.2wglobal.com:7005
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/oceancluster.log
MatchExpression *
</Location>
# Websi Cluster Configuration - Port 7007
<Location /si>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7007,nooslux051d.gl.2wglobal.com:7007
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/websicluster.log
MatchExpression *
</Location>
</IfModule>
Best Regards,
Jaison

Can I create a form in muse and have it work with a different hosting service?

I contacted a hosting service that I need to upload the site I built in MUSE to. (Hosting has already been purchased). I asked OMNIS:
I want to create a form with Muse and then upload my site to OMNIS, not muse, the forms will display as I designed them, but they will not function. I have someone to help me who is experienced in working with code. I can use Muse to export my site and then open the files in an HTML editor. "Update the source code of the form to make it compatible with the form processing technology used by your hosting provider (OMNIS) before you upload the files to their server." Can you help me with this? Do I need to get a script or something from you?
OMNIS ASKED me:
What are MUSE's site requirements?
I will be building other sites and my clients may want to have the site hosted elsewhere. Can you give me the easiest way to deal with forms?

Thank you for getting back to me Morgan.
I read in another forum:
There's a handy piece of software from CoffeeCup Software called "Web Form Builder". It's pretty affordable and easy to use and it can be hosted on the server of your choice provided that server uses an up-to-date PHP script.
This is what I have been using....but I would rather not have to deal with a third party form builder at all.
Do you reccommend this?

I need a definitive answer for using Premiere Pro CS4 to work with .m2ts and .mts files

I have a Canon Vixia HF20 and a Sony HDR-XR350V. The Canon gives me .MTS files and the Sony produces .M2TS files. What do I need to do to be able to work with these files in Premiere Pro? I've searched and gotten that I'll need to purchase a codec. But are both file types going to be good with one codec?
Also, what are the steps to getting started? Purchase the codec, load the codec...Will there be any other steps to working with the files in Premiere?
I'm sorry for the basic questions, I'm a photographer! I've never worked with video before, and this is HARD!
Thank you for your help,
Michelle

Hi, Michelle.
I'm nowhere near the authority on this stuff that many of the others are here, but I have Premiere Pro CS4 and I work directly with AVCHD .mts files from my Panasonic camera. I simply browse to the directory where the .mts files are located and drag them into the project. I didn't need to purchase any additional codec, this is natively supported in Premiere CS4.
I can't speak to m2ts files as I don't have any gear that generates them.
One thing you do need to know, however, and this is important. Whether you're running a Mac or a PC, if you're going to work with high def footage such as AVCHD, you're going to need a fairly high performance computer with sufficient RAM, good performing hard drives and a fast CPU.
I tried this on a PC that was fine for my recording studio (audio), fine for professional software development, but choked and stuttered working with HD material. That's not a problem with the Adobe software, it's just the nature of the beast. HD is extremely demanding stuff, so you need top flight gear to work with it. I bought a higher performance PC and now it runs just fine.
Hope this helps,
Chris

How can I work with big iMovie 6 file?

I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
Karl

Ideas and Suggestions for Working with Low Res Video Files

Hi,
A client has asked me to take all of her low res videos she shot with her iPhone and put them on a DVD.
I've made her aware that the end result is not going to be a Hollywood production. I even did a test for her to show the difference between a low res clip and a HD clip. You can see these clips here:
http://designerandpublisher.com/hs/lowrestest.mp4
and
http://designerandpublisher.com/hs/hdtest.mp4
She understands and will fix her camera to shoot high-res next time. Anyway, the footage (330 minutes) I have looks like this when imported into Premiere Pro CS4:
I first just set up a 640x480 timeline and imported one of her clips. It doesn't look too bad. I'm not sure why that green bar is there:
Then I went into the timeline's properties to see if I can somehow enhance it once it goes onto a DVD via Encore:
But i'm not really sure if it's worth fiddling around with a customized timeline. I don't have my hopes up though but I'd appreciate it if anyone could tell me what they did in this type of situation. It seems like the 640x480 timeline, once brought into Encore and transcoded for the DVD, may work best.
Any ideas are appreciated. Thanks.
The Deaf Guy

I don't edit video from a cell phone, and you don't mention any particular problems loading/editing... but in case you do have general problems with any of the files, some reading to keep in mind
Iphone won't edit easily because it uses a variable frame rate - A fix in message #22 http://forums.adobe.com/thread/934466

Working with virtual host & hosts files on a local network

Similar Messages

Maybe you are looking for