Workload management question (about task creation)

Hi everybody! When I run "ps -efo taskid" command I see a lot of tasks. My questions are: "Are these tasks created by "default" by Solaris?" , "What is the criteria by which Solaris creates these "default" tasks?" and "Shouldn't it be just one default task per zone?"
Thanks a lot!

Hi Satish,
You may find relevant information using following links.
http://help.sap.com/saphelp_scm2007/helpdata/en/f2/5e89c05cf44fee814174c0af27c061/frameset.htm
http://help.sap.com/saphelp_scm2007/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
Regards,
Harshil Desai

Similar Messages

Three questions about the creation of secondary indexes in ODS design mode

1. When we right click the Indexes folder in ODS design to select Create to create the Index folder 010, a small window pops up with a check box called "Unique", do we have to check this checkbox to create folder 010?
2. If we would like to include 3 InfoObjects into the secondary indexes, then how many folders we need to create? Need to create 3 folders like 010, 020, and 030 and place the 3 InfoObj. into the 3 folder respectively or create only one folder 010 and place all the 3 InfoObj. into this one folder 010?
3. In SAP documentation titled "BW Performance Tuning" about the Indices, it says "If the (uncompressed) F fact table is small, it is usually faster to drop the secondary (bitmap) indices before the load and build them up after the load"
Someone here says secondary index is only for ODS other than for cubes, but from the above statement, F fact table is related to cubes, then how to explain it? Also the above statement is talking above the variant in process chain that when you bring in a variant to load data to cube, then the drop index and generate index variants will be automatically created, does it refer to this? And what's bitmap index?
Thanks in advance and we will continue to give you reward points!

Hi Kevin,
Cube has Secondary index's. The index's that we find in the Manage of the Cube are the Secondary Index's. Please check the following link for more information.
http://help.sap.com/saphelp_erp2004/helpdata/en/80/1a6473e07211d2acb80000e829fbfe/frameset.htm
Also, to know about Unique indexes, use the following link
http://help.sap.com/saphelp_erp2004/helpdata/en/9b/c743f5b40711d194f900a0c929b3c3/frameset.htm
"The indexes displayed are the secondary indexes of the F and E fact tables for the InfoCube. The primary indexes and those defined by the user are not displayed. " (SAP help).
This should answer your questions.
Regards,
Praveen.

Questions about PO creation / update / cancel interfaces

Hi there,
An E-Business Suite 11.5.10.2 customer wants to use the 11i PO creation / update / cancel interfaces in order to manage Purchase Orders created from a 3rd party system.
I've been through the 'Oracle Purchasing Open Interfaces' guide (115mfgapi.pdf), but it's still unclear to me whether:
1/ It is possible or not to add a new PO line to an existing PO through the interfaces ? If yes, how do one do that: what interface ? sample code ?
2/ It is possible or not to change the distribution (= accounting information) of an existing PO line ? If yes, ...
3/ It is possible or not to reject the full PO document if a single line fails during the PO creation ? Same for a batch of POs: reject the full batch if a single PO fails ?
4/ Is it possible or not to cancel a PO line even if the shipment already occured ? And even if the payment already occured ? Are there some controls here ?
Thanks for your help,
Kind regards - Hugues

1. Answer is YES. You can add a line to an existing standard purchase order by choosing the UPDATE. This can be done through Purchase Documents Open Interface.
I can not give an example. It's quite long to write it. But You should use Open interface user guide to find nessesary columns. Just insert new row with status UPDATE and try to import
2. Think You can NOT.
3. Answer is YES. You can do it. Use "Cancel PO API". Function name is PO_Document_Control_PUB.control_document ().
For technical details read Open interface UG.
You must create exception to be avoid problems if some lines can not be canceled.
4. Answer is YES. You can do it if there's still expected quantity to recive.
boldJust from UG:*bold* :)
bold1. Purchase Order Change APIs. bold
boldThe APIs enable you to do the following*bold*:
- Record Acceptance/Rejection in Oracle Purchasing
- Update quantity, price, and promise date on standard purchase orders or releases in Oracle Purchasing
boldSo only qty, promissed date, price*bold*
boldRead next*bold*:
Line Level Validation and Update: This logic occurs when LINE_NUM is not null
and SHIPMENT_NUM is null.
1. No update occurs if the line status is FINALLY CLOSED or CANCELLED.
2. The new quantity or price value must be positive.
3. If updating quantity, the new quantity must be greater than or equal to the
greater of total quantity_received of all shipments and total quantity_billed
of all shipments for this line. After the update takes place, the new quantity
will be prorated at the shipment level and for each shipment the quantity is
prorated at the distribution level if applicable.
4. If updating price, no update occurs if a receipt has been created against one
of the line’s shipments and it's been accrued upon receipt. No update
occurs if an invoice has been created against one of the line’s shipments.
After a price update takes place, price changes are rolled down to the
shipment level for standard POs. No price update occurs for a release if the
Price Override flag on the blanket purchase agreement Line is No.
boldSummary:*bold*
boldYou can update qty if still there's a qty to receive (Expected) and if PO still is not canceled*bold*
boldEXAMPLE:*bold*
Usage Example
set serveroutput on;
-- After the API completes, do not forget to commit if the result is 1
-- and rollback if the result is 0.
DECLARE
l_result NUMBER;
l_api_errors PO_API_ERRORS_REC_TYPE;
BEGIN
-- This needs to be changed according to your environment setup.
FND_GLOBAL.apps_initialize ( user_id => 1318, resp_id => 50578, resp_appl_id => 201 );
-- Record an acceptance of Y for PO 1261.
l_result := PO_CHANGE_API1_S.record_acceptance(
x_po_number => 1261,
x_release_number => null,
x_revision_number => 0,
x_action => 'NEW',
x_action_date => null,
x_employee_id => 588,
x_accepted_flag => 'Y',
x_acceptance_lookup_code => 'On Schedule',
x_note => 'All valid',
x_interface_type => 'APITEST',
x_transaction_id => null,
version => '1.0');
IF (l_result <> 1) THEN
-- Handle the errors in the PO_INTERFACE_ERRORS table.
END IF;
-- Change the quantity to 5 on line 1, shipment 1 of PO 1263.
l_result := PO_CHANGE_API1_S.update_po (
x_po_number => 1263,
x_release_number => 1,
x_revision_number => 1,
x_line_number => 1,
x_shipment_number => 1,
new_quantity => 5,
new_price => NULL,
new_promised_date => NULL,
launch_approvals_flag =>'Y',
update_source => NULL,
version => '1.0',
x_override_date => NULL,
x_api_errors => l_api_errors,
p_buyer_name => null
IF (l_result <> 1) THEN
-- Display the errors
FOR i IN 1..l_api_errors.message_text.COUNT LOOP
dbms_output.put_line ( l_api_errors.message_text(i) );
END LOOP;
END IF;

A question about Job Creation

Hi Expert,
By JOB_OPEN, JOB_SUBMIT, JOB_CLOSE, we can schedule a job.
When the first two FMs is executed, the job is still in 'scheduled' status. Only when the FM JOB_CLOSE is executed, the job will be in 'released' status.
In my applicaiton, I need to check the job status. If the job is in 'scheduled' status, I think that the job creation is not successsful; Otherwise, the job creation is successful.
But the issue is, if job is in 'scheduled' status, how can I know whether all three FMs is executed in the job creation or only JOB_OPEN and JOB_SUBMIT are executed while JOB_CLOSE still not starts?
In the later case, the applicaiton should wait some time and check the job later.
Thanks for your support
Best Regards, Johnney.

Hi,
Suppose there two APIs.
In API1, there are four steps:
1. call FM JOB_OPEN
2. call FM JOB_SUBMIT
3. Save the Jobname and Jobcount in the DB
4. CAll JOB_CLOSE
in API2, there are two steps:
1. get the Jobname and Jobcount from the DB
2. Call FM BP_JOBLIST_STATUS_GET to get the job status.
API1 and API2 are executed asynchronically. Consider the following case:
After STEP3 is executed(STEP4 has not yet been started), the API2 starts to run. Now the job status that API2 get is 'Scheduled'.
This is not correct, because the job creation is still not finished. The API2 should wait some time and check later.
So my question, is how API2 know that the job creation is not finished.
Thanks & Best Regards, Johnney.

Question about user creation.

So I've created using the Wiki article https://wiki.archlinux.org/index.php/Users_and_groups here.
I've created a user and gave it a password and added to the wheel, and it works fine. I can login and it starts X and everything, however there is no file structure within the home/username directory. I always see on Arch Wiki and other ones about editing X rc files and what not, and they're referring to ~/.xinitrc or something similar.
However my X files are located in the root place still. Is this something I should be taking into consideration and changing? I don't want to get further down the road and then have something be setup wrong. As of right now the only folders in my user folder are Desktop and Downloads, and I created those. I'm just wondering if there is something I'm supposed to do to transfer my X server and Window Manager stuff from the root positions to the user level. If running these from a root point is an okay thing to do I'm fine with that, I'm just under the impression I'm not supposed to do that.

jasonwryan wrote:Don't run X as root. Follow the xinitrc wiki article and move all the files you need to run X as your user to their ~.
Alright. Thanks for the link, should I follow that as a general rule of thumb(Although I can't see myself really installing anything else as root in the future)? Right now my Display Manager and Window Manager as both installed under root as well, and a couple other things I believe.

Network Management: Question about calculating network,host and broadcast a

I would like to say i am new to this forum and I do not know if this is the right place to post this but i am currently in a cisco academy for CCNA and if anyone else is in this class i am stuck @ 6.2.2 in the online cisco material.....
given the following address/prefix of 141.124.88.174/30
enter the last octet in binary of the network,
I am totally lost @ how to find the network octet i know /30 means the first 30bits are network and the last 2 are host i also know the last octet is 10101100 or 172
my question how do you get .174 to .172??? if you are wondering how i know the answer --it is in the book i just dont know how to do it on my own :)
thanks much

Eric
My sense is that you may have skipped a step (or maybe I skipped in understanding your post). The best way to explain this is to refer to binary - which you have started to do.
For address ...174 the last octet is 101011 10 (in which 101011 represent the network bits and 10 represent the host bits). To find the network bits make the host bits all binary 0 - which means that the subnet address is 101011 00 or 172.
So the answer to your question is that you get from 174 (host address ) to 172 (network address) by changing all host bits to binary zero.
HTH
Rick

Question about Tasklists

I have a weird question about task lists.
lets assume I created a task list for a user and enering values in to a data form is one of the task and promoting the planning unit is the next step.
and assume the user has gone through the tasks and completed entering the values and promoted and marked the tasks as complete.
Now, I am the reviewer and review the values and promoted it back to him to change a few values where I am not satisfied.
How does the user knows if he has to re-enter the values again? but the tasks in that tasklist shows the tasks has been completed.
I am missing something or assuming it wrong. Can some one give me a clear picture idea about it. Appreciate your help.
TIA
sai

Hi,
Users get notification e-mails in which they would see annotation from previous plan unit owner if there is any. They could then know that they have to re-enter/adjust/amend some of the values. As for task lists, I usually recommend to users not to use complete box as it using it leads the same confusion you fell into. Task list completion status does not certainly serve to the purpose very well, so better stay away...
What I can tell about workflow is that with good training and sensible security configuration, workflow works almost perfectly in many places.
Cheers,
Alp

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Question about Rescheduling Start Date of a Task

Question about Rescheduling Start Date of a Task
I'm trying to determine whether the 'Reschedule' action is appropriate to my situation...
I have a service that consists of 4 tasks. The first 3 tasks will be completed immediately and then the request's 4th task will sit in a queue for about a month so that all of these requests can be grouped together and fulfilled during a few overnight work sessions.
While the 4th task is waiting to be fulfilled, the technician will be contacting the requestor to schedule the work to be done sometime during a 3 day window. The technician needs to specify which of the 3 days each request will be worked on. I'm not sure if I should store the date in a service form field or have the technician reschedule the task so that the start date of the task is set to one of the 3 days. If I use the reschedule feature, are there any downsides?
The advantage of using the reschedule feature is that the scheduled start date can be displayed in ServiceManager's task list and can therefore be sorted on and queried. This wouldn't be possible if I stored the date in a dictionary field on the service form. In that case, I'd have to use custom reports to group the tasks by start date.
Please let me know your thoughts...
Thanks,
Scott

This strikes me as a very good use of this feature, since your need to to have the date for this task rescheduled/reflected in ServiceManager. This is the specific effect of using this feature.
For the benefit of others reading this post, remember: this rescheduled date will not change the due date for the service.

Question about Scheduled Task

Question about Scheduled Task
RequestCenter 2008.3
Oracle 10g
Websphere 6.1.27
IE 7
Hi:
I have tried to get a scheduled task to work without any luck. I am referencing a date/time field on the form and the task goes to "Scheduled", but never moves to "Ongoing".
I've opened a case with support, but was wondering if anyone has gotten this to work.
Thank you
Daniel
Safeway Inc.

We just went through this too. If the plan is fairly complex, and has allot of conditional tasks you will have difficulty.
The explanation I got from Shweta is that the calculation that determines the OLAs before my scheduled task was to start looks at ALL the potential tasks and combines them, essentially saying the duration is much longer than what you think it should be, ie the sum of all potential task OLAs, not just the tasks that became active.
Bottom line if your scheduled date is with

Question about Quality Gate Management

Hi Solman profis,
I have questions about the transport requests in QGM.
My Solution Manager is 7.1.
I have a Solman project, in which I activated QGM and created a Change and created two transport requests (one workbench, one customizing) attached to it, .
I'm little bit confused by the concept.
My questions are:
1. Why I cannot see the transport requests that I created previously in the DEV system manually? If it's normal, for which reason is this designed like this? If it's not normal, how can I configure to see those requests?
2. What is the difference between the Change here in QGM and the Change in ChaRM?
3. In practice, how should the transport requests be created? By the developer in DEV systems, or by the responsibles in Solution Manager Workbench (Change Management Workbench)?
Thanks a lot!
Edited by: Charlie Red on Feb 13, 2012 12:08 PM
Edited by: Charlie Red on Feb 13, 2012 12:09 PM

For the 3rd question, I think TRs should be created in Change Management Workcenter, is it the correct process?
For the other questions, can somebody give some input?

Questions about Access Manager tutorials available in netbeans site

Hi
Thank you for reading my post
I have some questions about two tutoral which i find in :
http://www.netbeans.org/kb/55/amsecurity.html and
http://www.netbeans.org/kb/55/amsecurity-liberty.html
here is my problem :
we have some web services, now we want to have authentication applied for consumer who try to access our web services.
we need to have most possible flexibility because we may deploy the server for a customer with an already established Identity database ( Database Table with user details)
Also we need to have Transport level security using SSL.
I read and studied both of them and now i have some questions :
-I think Securing Web Services Using the SAML or UserNameToken is what we need for authentication and autorization of web service consumers?
is that right?
-Does Sun Java System Access Manager provide flexibility to authenticate user/password with a database table content?
-How we can apply roles in Sun Java System Access Manager when we authenticate users ?
Thanks

Imagine that we want to have an end to end security for our web services
we thought that we could use message level encryption to protect the soap message and also we should protect our web services from un-authenticated acess,
we will use userName token for this.
Our customer has large database which contains many user/password and role of those users.
some of web services should be available to higher role (manager) and not for all users.
so we should check a user role before we allows him/her to access a web service.
my question is whether Sun Access manager can help us with this? or there are other configuration or packages that we should apply to have this feature.
to explain more :
our client side is a swing application, users enter username/password to login into system. after they loged in, we send user/pass every time user want to request some data from some services. (is it good to send user/pass every time?)
We want Sun Access Manager to handle users authentication .
We also need to handle role related authorization, can Sun access manager handle this?
Thanks

I have three questions about managing my music library

Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
Thanks and I can't wait to hear from you.
Waseem

Wassimn wrote:
Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
As far as I know you're going to run out of disc space before you hit any limits. Each object in iTunes has a 64-bit key to access it. That said as your library grows it will get less responsive as bigger indexes take exponentially longer to process.
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
iTunes wants to manage everything inside one big folder. Some idiosyncrasies with the way it manages things if you have to move to a new drive means it is best if you can stick to that plan. If your library grows larger then you'll have to take manual control of where some or all of your content is stored. I use a variation of a script called ConsolidateByMoving which you could adapt for your needs.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
When it comes to deduping I've written another script for that called DeDuper, see this thread for background.
And for some general tips on getting organized in iTunes see Grouping tracks into albums.
tt2

Question about elearning - OKP SAP Commercial Project Management

Hi Gurus,
i have a question about an e learning course which SAP offers-
Course Name- OCPM10-
OCPM10 - OKP SAP Commercial Project Management 1.0 | SAP Training and Certification Shop
It's an e learning course for 20 hours, below are my questions-
Since its an e-learning course, is it to be completed in a specified time (within 2-3 days) or we can have access to it throughout the year but duration of course is 20 hrs
What kind of documentation is provided to me as part of this course.

1. C_TPLM22_05 - SAP Certified Solution Consultant PLM - Project Management with SAP ERP 2005
It includes SAP PLM 235 course material along with PLM 200, 210 220, 230,
2. C_TPLM22_60 - SAP Certified Application Associate - Project Management with SAP ERP 6.0
It is not including the PLM 235 course.
This is the basic difference between it. IN Certification there are 6 -7 areas , in each of them you have to score more than 70 % , there many few multiple answer questions as well. Finally over score will come it should be higher than 70 %. So, I ideally weight all the topics equally,
With Regards
Nitin P.

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Workload management question (about task creation)

Similar Messages

Maybe you are looking for