Workshop 9.2 on XP changed default admin pwrd now unable to start server

I have installed Weblogic Platform 9.2 that contains Workshop and Weblogic 9.2 on my Windows XP workstation. Everything was working fine until I thought I should change the default Admin username/password which was weblogic/weblogic. I did this by going under the Admin Console and going under the Security Realms and changing the password. But now when I enter workshop and try and start the server it tells me I need to look at the startup script. When I look at the scripts the passwords are encrypted. I have searched on line and found a some information about running some java scripts such as "java weblogic.WLST" or "java weblogic.security.Encrypt" of coarse these don't work and I am not sure if it is because my classpath is incorrect or I have to download some eclipse utilities first. If I had know that changing the default password was going to be such a pain I would of just left it, I have actually set it back to the default but even thought I have set it back to the default I still can not start the server under Workshop. I don't know how to fix this other that just uninstalling and reinstalling

I think you need to change the password that is stored in your domain (in fileRealm.properties file) as well to start the server. Weblogic's FileRealm ("weblogic.security.acl.internal.FileRealm") utility class can be used to do the same.

Similar Messages

How to change default admin password on Cisco Aironet 1040

How do I change the default username and password on the Cisco Aironet 1040. There is a default set and I want to change that to secure the device. I've checked the manual and can't seem to find the directions. Any ideas?

Hi Brian,
If this AP is already registered with a WLC then you can change it via WLC.
In WLC GUI, go to Wireless -> Select the AP -> Credential -> Override Global Credential-> Update username/pw/enable pw
In WLC CLI, you can configure it like this. If it is for all APs, then select all, otherwise AP name.
(WLC3) >config ap mgmtuser add username admin password Cisco123 secret Cisco123 ?
all Applies the configuration to every AP that does not have a specific user name.
Enter the name of the Cisco AP.
(WLC3) >config ap mgmtuser add username password secret
(WLC3) >save config
Are you sure you want to save? (y/n) y
If it is Autonomous AP you can configure using the "username xxxx password xxx" IOS command
HTH
Rasika
*** Pls rate all useful responses ****

ThinkPad USB 3.0 Secure Hard Drive - I can not change Default admin password

I followed all the instructions from the manual guide but the password cannot being changed.
enter in admin mode, then hold lock plus 9 until led flash in blue
input a new password (of course between 8 and 16 digits lenght)
then the led flash in green three times, but then the led flash in blue and then flash in red and then in blue again as the password had wrong length.
The manual does not provide furthe action to troubleshoot.
is the device wiht defect?
Any hint would be appreciated.
Thanks,
Marceloap

Hello Denmark calling.
Solution for you’re:
ThinkPad USB 3.0 Secure Hard Drive problem.
In order to set the Admin pass, you will have to do the following
1. Press 0+OK for 5 sec, enter "12345678" and OK       = BLUE LED   (Admin mode)
2. Press OK+9                                                                        = BLUE LED flashes
3. Enter admin code with correct fashion, and then OK = BLUE LED flashes   (and now most important)
4. Re-enter admin code, and OK                                        = BLUE LED.
This must be done before attempting to change user password. (Obvious reasons)
For User code change.
This can be changed by accessing the admin mode first = BLUE LED
And then
1+OK                                                                                            = BLUE LED flashes
Re-enter user code and OK                                                    = BLUE LED
For User code and Admin code there is not mentioned any reference online reference supplied by Lenovo, which tells the new proud owner the correct way to alter standard codes.
But let it be said that in my humble opinion this is a (almost) great product (SSD would make the difference for me personally)
Hopes it helps
TaR

SharePoint 2013 Foundation Search - Change the admin components to the new WFE server

Hi,
We tried to move the Search Service Application from one server to another server which was newly joined in the Farm.
In this case,the Search Service in my App server - which was working earlier also did not work. I tried almost all Powershell scripts to stop the service, and i could not make it.
Please let me know, how to stop the search service in both servers and to run only in the new server that i have joined.
Also, we need to move all Search Admin components to the new server, and from then Search Index should work only in the new server and not the old one.
Kindly let me know the possibility how can this be achieved.
Thanks in Advance!

Hi Karthikanandh,
If you want to stop the Search service in both servers and only run in the new server, then you can stop the service in Central Administration in both the two servers and start the service in new server.
Please go to Central Administration > System Settings > Manage service on server > change the server to the one that you need to stop the search service and then stop the search service.
To move the search admin component to another server, then you need to clone the active Search topology and move that component, and then then activate the topology and move the remaining components.
http://sharepoint.rackspace.com/sharepoint-2013-search-administration-tutorial
http://blogs.technet.com/b/pfelatam/archive/2013/05/10/create-a-search-topology-in-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/jj862354.aspx#Search_Comp_Clone
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Changed to firefox 4 now unable to use hide ip ng latest version. How do I make it work?

I have an acer 8943g laptop I have been using firefox 3.6.15 with hide ip ng 1.6 with no trouble. I recently changed to firefox 4 and though hide ip ng shows in the firefox extensions it no longer works with firefox 4.I have set the advanced settings to work as automatic detect with a proxy but cannot get it to work. Hide ip ng 1.6 works fine with internet explorer 9.

I think you'd have to contact the developer and ask them that question. Either that or switch to an add-on which works with Firefox 4. Try this one maybe: [https://addons.mozilla.org/en-US/firefox/addon/stealthy/ Stealthy]

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

How to change Default editor in Linux for PL/SQL Programming

Deare friends ,
I am using oracle 8i (8.1.6) on RedHat Linux 7.2 , But i donot know how to change default editor for modify editor on sql prompt say ex:-
In winodow
SQL> ED
it open nope pad to modify sql and pl/sql statement
while in linux
SLQ > ED
it open one editor but it is not easy to work and i want to change that editor so could you tell me how to chane editor i want to use vi editor .
if any boyd know reply me on :-
[email protected]
or on this forum
Thanking you in advance
Piyush Patel

Either manually do a 'define editor=vi' when you log in through sql*plus, or put that in the glogin.sql in $ORACLEHOME/sqlplus/admin or put that in a login.sql in the directory you run sqlplus from.

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

How do I change default printer settings in Lion?

I just got a new MacBook Pro and after installing the correct drivers and setting up my printer, it now prints 2-sided by default. How do I change this default setting?
I'm using a MacBook Pro, OS X 10.7.4, printing over AirPort to a KonicaMinolta office machine. I had this same setup with my old MBP (OS X 10.6.8) with no problems whatsoever.

Many vendors have started releasing printer drivers that have been defaulted to two-sided (duplexed). I would assume that the printer driver you are using on 10.6 is an older version compared to that being used on Lion.
There are two possible actions. One is to create a Preset that has the driver set to single sided and use this preset when you don't want duplex. The other is to modify the PPD for the printer so that it is set to single sided by default.
Making a Preset is easy. Open a document and select to print. Make the changes in the print dialog to set single sided printing and then open the Presets menu and choose to save this change for this KM printer. Then whenever you print to the KM just ensure the Preset is set to whatever name you gave to the single sided setting.
As for modifying the PPD, this is done via the CUPS web page.
To access CUPS, open Safari and type
http://127.0.0.1:631/printers
This will open the CUPS Printer administration page and will show all the printers currently configured on the Mac. For the printer that you wish to change the defaults for, click its name in the Queue Name column.
Clicking the printer name will open the printer administration page for that printer. Here you need to click on the Administration drop menu and then select Set Default Options.
This will show a new page with four menu headings (links); Options Installed, General, Banners and Policies. Select General. Scroll down the list until you find an entry like "Finishing" or something similar that shows the single sided and two sided setting. Change this from 2 sided to 1 sided.
With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this button and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
Now you can open an application and select to print and then check the output is set to single sided.

How do I change the admin password in SJSWS 7.0?

I've googled this, searched the forums, read the manual, but I haven't found anything that explained how to change the admin password for SJSWS 7.0. So, right now I'm stuck with "adminadmin" as the password, which I think is the default since I don't remember specifying that during install. Clearly I can't use this in production with the default admin password... sorry if this is a rtfm question, but I really didn't see anything in the manual about changing the admin password. Thanks!

You could use the following CLI command:-
wadm> set-admin-prop --set-password
More information about the command:-
http://docs.sun.com/app/docs/doc/819-3283/set-admin-prop-1?a=view
You could also use Administration console-
- Login to the Administration Console and click on the Nodes tab
- In the Nodes page, click on the Administration Server link within the Nodes table
- Go to "Administration Server Preferences" section in the General page and change the password

Can't change the admin password in HSS

Hi all,
I want to change the default admin password to a different one,
I thought I could change it via HSS but when I open the properties menu, there is no option to change password,
Does anyone know a different way?
Thanks,
Yuval

You can also change the Password from Your relational db
For Example
Go to db and Type in query
Select * from css_users;
Result
User Password
native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER admin {SSH2}L+o8ap4rF392KtWf6/druBlx96bqIOcvRh+fbSdeeXNyjdMLdSTEpmB0nJBqaJoF Administrator Shared Services Administrator 1 Shared Services System Shared Services System
Edit the Password column line
"{SSH2}L+o8ap4rF392KtWf6/druBlx96bqIOcvRh+fbSdeeXNyjdMLdSTEpmB0nJBqaJoF"
and replace with Password123
and save the query .You need to restart the hyperion server and login into the shared services with lastest password
Thanks,
Sreekumar Hariharan

Changing the admin port number

Greetings all,
I have just become the proud father of a weblogic 9 installation and the admin before me changed the admin port number. As I have NO experience with weblogic, could someone be so kind as to tell me where I can find the port number being used for the admin console?
Thanks!
Earnie!

Earnie,
First, try port 9002 (https) since that's the default.
If that doesn't work, have a look in DOMAIN_DIR\config\config.xml. In there you'll find something like this:
<administration-port>1234</administration-port>
There ya go!
Mike
Weblogic/J2EE Security Blog: http://monduke.com

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

Unable to change default write disk of Lenovo K3 Note

I'm unable to change default write disk of Lenovo K3 Note to sd card. At first i was able to change later on the option shows only as phone storage as fixed. I tried to factory reset many times at first it works later the same issue persists. I tried the format the sd card, tried a new sd card, still no use. Please Help ...

Hello
How R U All ?
hope you all are fine
The problem that i put an 32GB SD in the mobile
and i went to the stourge options and make the default writeing is in the SD
and i move some apps to the sd
but sometimes the apps that in the sd did not open
even the photos and videos in the sd the mobile did not recognise it at all
its seems like the mobile didnt recognise the SD at all
and to solve this problem i forced to restart the device
have anyone have the same problem?
Admin note; threads merged, subjects edited

Default admin user name password

After snow leopard server was installed successfully from the install dvd and mac mini server was restarted to continue the setup, I entered in the server serial number and it tells me it's "Setting Up ... Your server is being configured."
In the bottom left corner of screen it showed "Upgrading services" and after about 10 minutes when the progress bar was about 2/3 full, an error message was shown "An error occurred while configuring your server." and "Your server needs to be restarted to complete setup."
After I clicked "restart" button, the mac mini booted showing me a login dialog to ask me to log in. But the problem is I did not even get a change to create an admin account yet because the failure earlier!
So what's the default admin account user name and password so that I can continue the setup process?
Many thanks in advance.

Finally I decided to reboot the mac mini server from a remote dvd drive again to verify the mac mini server serial number using system profiler of the installer. The serial number shown in profile is consistent with the one shown on the bottom of the mini. So it seems to me the password setting somehow corrupted during the previous configuration error.
I then use "reset password" from utilities menu of the installer to reset the root password. After that, Server Admin on the admin macbook can connect to the server without problems using the reset password.

Workshop 9.2 on XP changed default admin pwrd now unable to start server

Similar Messages

Maybe you are looking for