Workshop and training preferences

Greetins all,
May I ask a quick question with regards to training and skills development. In the UK we've been training around the topics of IDES/ERP and BW - with the vast majority of faculty interest being in ERP because ot touches on so many business and IS topics.
However as new products become available and SAP is taken up by other faculty the range of training topics varies. In the UK for example there is a lot of interest in SCM and SRM - I ran a very brief 'taster' workshop in SCM in collaboration with our Irish Service Centre a few months ago and got perhaps 8/9 attendees but it seems perhaps there are another dozen or so that woiuld be interested in a second session.
So I was wondering what other topics are of interest to faculty - CRM, BW, etc.
And also - more importantly - would you actually use the skills in the classroom? The reason I ask is because although there is great demand in finding out about SCM no UKI school uses it as yet - we are still an ERP/Business Intelligence community with some interest in Portal and Solution Manager for the more technical faculties. SCM etc. may be of interest for faculty skills development and research puroses but would anyone actually use it??
Any thoughts gratefully received
Martin
Martin Gollogly
Director, University Alliances
Unied Kingdom and Ireland

Hi,
Last October, I took a JBuilder for WebLogic course. I asked about web services
support. I was told at the time (JBuilder 7) that you had to have an additional
plugin over and above the JBuilder/WebLogic Server installation. I never got
the plugin.
Also, you would need clarification on what the plugin addresses. WebLogic Server
has two different web service implementations. You mentioned .jws files so that
makes me believe that you are using workshop-enabled web services not WebLogic's
standalone (ant script) web service implementation. You need clarification on
which (either? both?) JBuilder supports.
I belive that you can start by opening a support case with BEA. Then if BEA needs
clarification from Borland, BEA will contact Borland.
hope this helps,
pat
"Tanya" <[email protected]> wrote:
>
I keep seeing advertisements and bulletins that Workshop and JBuilder
integrate,
but I'm unable to find any data on BEA or Borland’s web sites. Do they
integrate
more than a simple recognition of .jws files?

Similar Messages

$30 upgrade fee is for Wireless Workshops and Backup Assistant Plus?

I recently upgraded my device, over the phone, using the 2 year discount price of $199. I was completely unaware and never told by the VZW agent that I would be paying an extra $30 to help VZW offset the cost of Wireless Workshops and their Backup Assistant+ crap. The agent on the phone told me to expect a $199 + tax charge on my next bill but failed to mention the extra $30 and, to be quite honest, I'm pretty upset about this. I called the customer support line and was told the $30 free is there to support the cost of the Backup Assistant Plus service (which I do not use and have completely removed it from my phone because it's trash) as well as the Wireless Workshops they offer in their stores. This is complete ** and if I had been made aware of this nickle and dime scheme by VZW when I was upgrading, I would have canceled my upgrade and gone with another carrier instead of signing another 2 year contract. I will NEVER go to a workshop for a device, service, whatever that I know how to use or could spend an hour researching online so why am I having to pay for this? I use Titanium Backup Pro and the Android SDK environment to backup my phone and data instead of the clunky Backup Assistant Plus trash. In fact, I've completely removed all traces of BA+ on my phone...
So why am I "donating" $30 to Verizon for services that I, and I'm willing to bet most people, don't use? Why wasn't I made aware of this by the VZW agent I spoke to on the phone?
/rant

steelystan wrote:
The final price of the phone was $260. I was told by the VZW agent to expect a ~$199 + tax ($215) charge on my next bill. There was no mention of a $30 upgrade fee. I was not notified BEFORE the purchase, and if it's listed on the discount upgrade page it's not very clear.
I did not see the articles in the news about this fee in the past and VZW did not make it clear to me that I would be charged this fee. I expect the VZW phone agent to make me aware of the fee's associated with any service I use, like this upgrade, but the agent failed to mention it.
Yes, I am complaining about the discount. I'm already unhappy that I was forced to lose my unlimited data plan when upgrading (unless I paid for the phone in full), but being charged an extra $30 for "services" like BA+ and workshops is absurd. Regardless of how much of a discount it was I don't like having surprise fee's come up on my cell phone bill. Why don't they include that free in the displayed upgrade price? Why not show $229.99 instead of $199.99?
And it's 57% discount, not 60%+
Well according to the stats you just posted sales tax is 8% so since you insist on including that, then at full price a $600 phone plus 8% is $648. $260/$648 is 40% thus you received a 60% discount. Also even at 57%, you are complaining about a 57% discount? Really? If you went to a car dealer and got a 57% discount you'd be ecstatic. If you got a TV for 57% you'd be ecstatic.
This fee was announced April 11th 2012 It made ALL the major news sources.
http://www.engadget.com/2012/04/11/verizon-upgrade-fees/
http://money.cnn.com/2012/04/11/technology/verizon-upgrade-fee/index.htm
http://www.reuters.com/article/2012/04/11/verizonwireless-upgradefee-idUSL2E8FBGQ820120411
http://www.wired.com/gadgetlab/2012/04/verizon-upgrade-fee/
http://arstechnica.com/gadgets/2012/04/verizon-to-start-charging-30-upgrade-fees-on-april-22/
http://www.zdnet.com/blog/gadgetreviews/verizon-wireless-to-add-30-upgrade-fee-for-all-existing-customers/29184
http://www.huffingtonpost.com/2012/04/11/verizon-wireless-phone-upgrade_n_1417959.html
http://www.dslreports.com/shownews/Verizon-Starts-Charging-30-Phone-Upgrade-Fee-119201
http://news.cnet.com/8301-17938_105-57412428-1/verizon-to-start-charging-for-phone-upgrades/
http://news.yahoo.com/verizon-jumps-board-upgrade-fee-train-230900778.html
http://usatoday30.usatoday.com/tech/news/story/2012-04-11/verizon-wireless-upgrade-fee/54173448/1
Just to name a few sources.
There is no way you were not told in some fashion. You say VZW agent. So you ordered this over the phone? Ok so where did you see the phone you wanted? Um at this site? Well the fee is listed VERY clearly on the price of the phone. if youw ent into a VZW store it;s CLEARLY listed on the price tags.

FREE SOFTWARE AND TRAINING FOR 'INSTANT E-COMMERCE' IN EUROPE

FREE SOFTWARE AND TRAINING FOR 'INSTANT E-COMMERCE' from BEA Systems -
          the E-Commerce Transactions Company
          Attend BEA's free technical seminars, and you'll walk away with both the
          knowledge and the BEA WebLogic software to build and deploy
          personalised, reliable, and amazingly responsive Web sites.
          Don't miss these information-packed workshops scheduled for major
          European cities during March and April. We know you don't have time to
          waste, so you'll hear about how BEA can help you create "instant
          e-commerce."
          SEE HOW TO BUILD AN E-COMMERCE SITE
          With live demonstrations, we will lead you through the step-by-step
          process for building intelligent and reliable e-commerce sites. Learn
          how to build Web sites with a high-performance Commerce Server. During
          the three-hour seminar, you will see and hear practical insights into:
          · Personalisation and Portal frameworks
          · Creating 'shopping advisors' and building with EJB components
          · Ensuring reliability and scalability on the Web
          · Tying WAP into e-commerce applications
          LED BY BEA WEB TECHNOLOGY EXPERTS
          The sessions will be led by BEA technologists who have experience with
          hundreds of successful commercial installations to date using the BEA
          E-Commerce Transaction Platform - the solution used by organisations
          including British Airways, Vattenfall, Carrefour, Nokia, E*Trade,
          Deutsche Telekom, and Amazon.com.
          YOU GET A COPY OF THE LATEST E-COMMERCE SOFTWARE
          And, just for attending, you will walk away with a copy of BEA WebLogic
          Server and the new BEA WebLogic Commerce Server - the software you will
          see used to build an e-commerce site during the seminar. You will be
          able to practice your new skills as soon as you get back to the office.
          Seminar Schedule:
          21 March Zurich
          22 March Munich
          23 March Prague
          28 March Paris
          28 March Copenhagen
          29 March Hamburg
          30 March Frankfurt
          30 March Stockholm
          4 April Warsaw
          4 April Helsinki
          5 April Oslo
          6 April Dublin
          11 April Manchester
          13 April Madrid
          18 April London
          19 April The Hague
          20 April Brussels
          20 April Milan
          These practical workshops are FREE of charge, but spaces are very
          limited, so we advise signing as soon as possible.
          Visit http://www.bea.com/events/instant/ to find out more details and to
          register.
          Please note that the technical information at these seminars will be
          given in English.
          Best regards,
          BEA Systems, Inc.
          The E-Commerce Transactions Company
          www.bea.com
          For conference registration by phone: +32-11-300-640
          Learn how to build reliable, personalised e-commerce Web sites -- and
          walk away with FREE BEA software.
          Visit http://www.bea.com/events/instant/ to sign up for one of BEA's
          European 'Instant E-Commerce' seminars.


You could look at www.cartweaver.com
It plays very nicely with Dreamweaver.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Captivate 5.5 Template -- Settings for Demo and Training modes

Hi
I am trying to create a Captivate 5.5 template for our simulations which will be captured in both Demonstration and Training modes.
In the template file, I go to Edit > Preferences > Modes, select the both the modes (from the drop-down list) and make required settings, and save the template.
Now, when I try to record a new project based on this template, I am asked to select any one of the modes. As a result, I get only one type of output. How to get both modes in one go? Is there a workaround?
Thanks for your help.

You'll need to add your simulation capture slides to the template AFTER capturing the two outputs. The template can only really be used as a shell to add introduction and conclusions, as well as quizzing etc.
Since (as Lieve points out) you end up with separate files for each different output, you'll also need to use the templates to create a shell project for each different output, and then paste the slides from the captures into the shell as it were.
Quite frankly, you're better off doing things this way anyway (capturing first and then pasting the capture slides into another shell project) because in any capture project you need to do quite a bit of editing and culling of duplicates or redundant captures. It's quicker and easier to do this editing when the project file is smaller. So what I do is clean up my captures first to get down to the minimum number of slides required for the simulation, and then paste those slides into my project file generated from the template. I do the copy/paste after culling out the unnecessary slides, but before saving the capture file. That way, I always have all of the original captures as a backup in case I went too far in the culling. Only after the project has been finalised to I go back and delete the original captures.

BEA Weblogic Workshop 10 training

Hi all,
We need to train our developers. Do you any course offer for Weblogic Workshop 10?
Thanks,
Liem.

HI,
you can contact oracle sales people for having training on weblogic workshop 10.x.
I hope if you contact them directly they will provide you this course material including training.
After training if you have any quires on workshop and its related issues you can open ticket with oracle weblogic workshop team.
Hope this information is enough for you to get down to train to your people.
you can also post queries on this forum if you need any further help.
All the Best.
Regards,
Kal.

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

SQL Report not showing data - available in SQL Workshop and SQL Developer

I am having an issue with developing a SQL Report in APEX 3.2.1. I run the code in both SQL developer and SQL Workshop and I get data pulled back (both against my development environment). When I run the same code in a SQL Report region, it returns no data available. Does anyone have any idea what would be causing this? Other regions on the page accessing different tables in the same schema return data without issue. Any help would be appreciated.
Thanks
Freddie

Could you explain the last comment a bit more. Here is a bit more info just in case I touch on the info with it. The db schema is BPAMGR, the Workspace is BPAMGR. We use the same schema for all of our reporting. All of our tables are in the same schema. We don't use any tables outside of this schema. Our APEX workspace has been associated to only this schema. The tables are able to be queried by SQL Workshop in the same APEX instance that the report application is under.
Freddie

Urgent need for AP and PO test scripts/scenarios and training user manuals

Hi There,
Can anyone send me test scripts/scenarios and training user manuals for AP and PO
Please send me the docs as soon as possible on [email protected]
I will really appreciate your help.
Regards
Kush

Dear
this topics must be included in the testing scenario
1-Enter Supplier Data Enter information for a given supplier, including supplier sites/addresses
2-Create Invoice Batch: Enter information for Invoice Batch header
3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
4-Invoice Distribution: Enter information details of a selected invoice
5-Schedule Payment Create Payment Schedule
6-Create a Credit Memo: Enter information to create a credit memo
7-Create Employee Exp:Enter information for an Employee Expense report
8:Validate an Invoice: Validate an Invoice
9-Account an Invoice: Create Accounting Entries for an Invoice
10-Create a Quick Check: Enter data to create a Quick Payment
11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
14-Transfer to General Ledger

Can't access Desktop and Screensaver Preferences

Hello,
I have had my macbook for 3 months and absolutely love it. I just have one problem which has occurred over the last couple or days.
When I go into the System Preferences folder I cannot access the Desktop and Screensaver Preferences. And instead of the regular icon for this, there is the System Preferences icon and the letters are jumbled below the icon.
I've searched through this forum to find a solution and have followed the following steps, to no avail:
I've checked for software update but my computer is updated
Have used Disk Repair using startup disk, but no errors found
Downloaded and ran Yasu, to clear check and clear caches
Deleted apple.com.screensaver.xxx.plist - in Home/library/Preferences/Byhost
Finally, I attempted to delete com.apple.preferencepanes.cache, and also com.apple.preferencepanes.searchindex.cache, but they always reappear in the Cache folder, no matter if I move them to desktop and delete them, or just put them straight in the Trash.
This all sounds really longwinded, sorry if it's unnecessarily long. I hope someone is able to help!
Cheers.
Tokyoanna
Macbook Mac OS X (10.4.8)

Read this...
http://www.macsimumnews.com/index.php/archive/macosgdiagnosing_a_system_preferencesproblem
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Error when opening User and Group Preferences

After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...

Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar

Printers and Scanners preference pane does not work after Mavericks upgrade

I upgraded to Mavericks on my late 2011 MacBook Pro, and my printers and scanners preference pane stopped working. Sometimes it comes back as an error and wont open, other times it opens but the list of printers is obscured and not really showing, and it does not react normally. I tried reinstalling from System Restore with the onlie version, but that just took 6 hours but did not really help. I am going a little crazy as I cant get my Canon MX330 scanner installed and recognized. Does anyone have any ideas for me please??

I'm assuming that you're referring to the Printers & Scanners in System Preferences (not a preference pane, which is a different animal).
While I haven't experienced your issue, one thing that users find helpful is to go to System Preferences/Printers & Scanners/, and delete the printers listed by tapping on - (minus). Then, reenter the information when it's required later.

I need information about ESS and Training and Work Experience

I need information about ESS and Training and Work Experience.
Anyone know if there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
I appreciate information.
Thanks.

Marciano,
check this documentation
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
Thanks
Bala Duvvuri

Certain pop up windows are not apperaing on my screen. Save as PDF and Doc preferences never appear

Certain pop up windows are not apperaing on my screen. Save as PDF and Doc preferences never appear, and lock me out until I press return. So they are active, I just can't see them. Any ideas?

They are obviously off the screen somewhere. Did you have a dual monitor set up at one time? You can try increasing the resolution of your screen to see if you can get a part to show or maybe just resrt the preferences (Cmd(Ctrl)+Opt(Alt)+Shift as you restart AI) to reset the defaults.

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

Workshop and training preferences

Similar Messages

Maybe you are looking for