Workspace join works, turning on device management fails

i'm testing workspace join. Joining my windows 8.1 device to my local ADFS/DC setup is succeeding. In this environment i also use a SCCM 2012 R2 site system with an active and working Intune subscription. I workspace joined with the UPN matching a local
user using <labname>.onmicrosoft.com.
The workspace join is working however turning on device management is failing? Anyone knows what might be the issue here?
regards!

Hi,
I’m glad to hear that you got it working.
Thank you for sharing your solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Windows Tablet workplace turn on device management failed on auto-discovery without any error

Hi
I am using windows surface pro 3 to test windows mdm function. I set up a CNAME for my test domain and pointed it to my develop desktop. My discovery service uses a publicly signed cert from VeriSign. If I turn off the auto detect server address switch and
input the discovery server manually, everything works well. But if I using the auto-discovery, the enrollment stopped before sending the discovery SOAP request.
Below is the network traffic between my tablet and my server:
step1: https to enterpriseenrollment.mydomain.com and failed for SSL certificate mismatch
step2: http to enterpriseenrollment.mydomain.com and get 302 redirect(my discovery service)
step3: https get to my discovery server and get HTTP 200.
Then the tablet does not send any request any more, it should send a HTTP get again with Content-Type: soap+xml and then a POST with soap but it not.
These work flow is as same as the Windows Intune and Intune works! I don't know why.
Thanks for any help!

Yes, because if you are using the actual hostname in the manual address, something like
https://yourServer/..., and if the SSL Certificate is issued to "yourServer" (CN=yourServer), then there is no certificate name mismatch or SSL errors during certificate validation.
However, when the automatic enrollment happens and the HTTPS request is sent to
https://enterpriseenrollment.yourServer.com/..., then even though the underlying connection is made to yourServer IP Address, the certificate that the server presents is for yourServer, not enterpriseenrollment.yourServer.com.
So there will be a certificate name mismatch and the secure channel establishment will fail.
For this automatic scenario to work properly, the server certificate must be issued to the correct domain - such as a wildcard certificate (*.yourServer.com). That should ensure that there are no secure channel errors and then the enrollment process can
continue further.
You can use the manual address for development/testing purposes, but once you decide to release the solution, you may want to use the automatic discovery for easier end user interaction and use the right SSL certificates - issued to the right CN.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

I bought a mac book air. when i use sony bluetooth headset on mac os, it works well, but on windows 7 it can't work in the device manager. why?

i bought a mac book air. when i use sony bluetooth headset on mac os. it works well
but with windows 7, device manager did not know the device.
why?

I disabled my microphone in Bootcamp Win7 Ultimate 64B and now it is completly gone. I used the Windows support CD I made and re-installed the 64B Cirrius drivers but the microphone is no where to be found also missing in device manager as well as Control Panel Audio.
Help.

Update of device manager failed

hi,
i use a BOLD 9900. lately, BB DEVICE MGR failed to detect the phone "disconnected" so i installed an update reported by DEVICE MGR. the update updated v7.1 bundle 2108 to v7.1 bundle 2807. during the sequence of steps shown on screen (BACK UP; INSTALL; REBOOT; RESTORE), the process has stalled at REBOOT , reporting CONNECTING TO DEVICE (this may take a few minutes). the phone is off and nothing has happened in about 1 hour. what do i do?
Solved!
Go to Solution.

today, the update software showed "failure to open conneciton to device. password may be required" (or equivalent). RETRY or CANCEL? i previously selected RETRY and the software returned to reboot phase. this morning (after leaving computer overnight), the same "password may be required" window was open and i selected CANCEL.
I beleive the phone no longer has an operating system. pushing and holding the off/on button does not start the phone. what can i do? I assume that i need to re-install the operating system. any guidance? anyone?

SD slot not working or in device manager

I have a HP Pavilion dm4 1050ca. I used my older brother's camera to take pictures and put them on an SD card I own. This is the first time I realized my laptop had an SD reader. I tried to put the card in but nothing happened. There was no sound and nothing in My Computer. I went to the HP site and downloaded the file to reinstall it. I uninstalled the old one and installed the new one. Still the same thing. The card only fits one way so it isn't upside down. I have no other way to get the pictures off the SD card, and no other SD cards to try in the slot.
I've tried;
reinstalling file (sp50822)
restarting computer
looking in ALL device manager folders
looking at device manager hidden folders
removing and putting in SD card
I welcome any help
Please and Thank you~

Hi,
Have you tried Scan now from the following link ?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4221...
Also my suggestion: uninstall the driver and install again (the above sp).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

CS6 was working fine until App Manager failed

I got a message to run updates on April 18; I obeyed meekly, but the process hung for some unknown reason. Since then, I have been playing ring-around-rosy with Adobe Support and they seem not to be able to read my chats nor understand on the phone. At first, the entire suite was completely unusable. I have since uninstalled; used the clean up tool; uninstalled all prior versions of the Suite (CS4 and CS5, which I still used), and completely reinstalled. I have deactivated and reactivated; uninstalled, cleaned and reinstalled repeatedly - as demanded by several calls and chats with Adobe Support. Now, App Manager and Support Advisor both fail - the former with an initialization problem and the latter because it insists on Adobe Air that I have also installed repeatedly but which it does not seem to find.
Finally discovered that to make MOST of the suite work, I had to manually change all of the various folder and file permissions to force admin execution (even tho I am an admin) AND add security for Trusted Users. Now, of course, I have to confirm that I want to execute as an admin each time, but that isn't my biggest headache.
Current HUGE headache is the problem with Acrobat ProX that requires that in order to save as PDF from Word or Excel (which I must do about 10 times an hour), I must
start Acrobat
start task manager
kill both acrobat.exe and acrotray.exe.
THIS IS FOR EACH SAVE! [Thanks to the person who suggested this solution on another discussion!]
I have now updated 2 chats with this problem, but each response refers me (in exactly the same language) to a page that tells one how to solve a different problem for Word 2003 and Acrobat 3 and 7!
Any help would be appreciated.

Judycbarlow the fact that you are having to adjust file permissions could indicate that the permissions for your current User account may have become compromised. As a test can you please try creating a new local administrator account and see if you face the same difficulties. Also what version of Windows are you using?

Device Manager HP Printer ! Symbol, Windows "failed to connect" Sound- Yet Printer Works

Every startup, I hear the Windows "device failed to connect" sound. How can I get rid of this?
I have an HP J6480 Printer with WIn 7. Device Manager is not recognizing the printer driver.
Under Device Manager, the printer is listed with the ! error symbol. No other devices have an error symbol. Yet the HP Solution Center and printer work.
1) I have tried fresh installs of the current HP Full Feature Software.
2) I have tried the HP Uninstall program, going through all five Uninstall programs two times.
3) I have run CCleaner to clear registry issues.
4) I have tried deleting the Device Manager "Officejet ! J6400 series" entry. The Solution Center and the printer then do not work. Apparently, Device Manager recognizes the printer but not the driver. I have to go to "Programs", "HP", then "Officejet J6400 Series" to reinstall the software.
5) I have tried to get Device Manager to recognize the software. When I click on "! Officejet 6400 series", I get the message "the drivers for this device are not installed (code 28)". If I then click on "Update Driver" and select" Browse my computer for driver software" then click on "Browse "C:\Users\Myname\Downloads", where I have both the HP 13.0 Full Feature Sofware Software and the Basic Print and Scan Driver files, it says "Windows cannot find driver software". If i click on "Search automatically for driver software" I get the same message.
I would very much appreciate any ideas! Thank you!
This question was solved.
View Solution.

Friendlycomputr,
Your persistence is admirable! I totally understand you just want it working properly. I really appreciate the updates, I am going to look into this and get back to you as soon as I can!
Thanks again
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Satellite Pro L670-18F PSK3FE Webcam stops working become "Unknown Device"

The *webcam* on my *Satellite Pro L670-18F PSK3FE* which is running *Windows 7 64-Bit* worked fine until this week. My notifications bar started to say *"unknown USB device"* and when when I went to use the webcam it was no longer working.
When I turned the webcam off in the BIOS the notification stopped but when I turned it back on the notification kept coming up again. The unknown device is clearly the webcam.
I have updated my BIOS and tried system restore.
I have also downloaded the driver for the webcam from http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have been trying to run that - +but it NEVER seems to finish installing!+ I will keep trying to reload the driver and see if that helps but as of now I do not believe that the driver will help.
If this is only a driver problem could someone suggest how I get the driver to actually install :-(
I am now at a loss. I am unsure what to do now. Suggestions?... +please!+

Hi
Unknown device means that the driver is not installed.
I think the webcam driver installation should fix this.
Since the face recognition use the webcam too, I recommend uninstalling this tool as well as the old version of webcam software.
Both (or just face recognition) should appear in control panel -> software
Now download the both applications from the driver page.
Start with webcam driver installation:
1) Unzip the webcam driver package
2) The TC30049700N.exe can be unzipped too (right click -> extract here)
3) Now you should see different files exe, dll, and others try to execute the setup.exe to start the installation. If this does not work, go to device manager, mark the unknown USB device (webcam) and install the driver pointing to the extracted folder containing the webcam driver files. The system should pick up the dll files automatically.
4) Reboot the notebook and follow with face recognition software.
Good luck

Device manager

itunes and windows dont recognise my ipod. am setting it up on new computer, worked fine on last one. have tried reinstalling itunes again. does not work. noticed in device manager under usb that with apple mobile device usb driver it has an exclamation mark on it and when click on it it says 'Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
how do i fix this

Hello popopopoyp,
I would start with this article on troubleshooting driver issues with your iPod in Windows. You may need to remove and re-install just the drive itself.
http://support.apple.com/kb/ts1538
B-rock

CD-ROM error message in Device Manager using Vista and X61s

My IBM portable CD-ROM has suddenly stopped working.
The Device Manage throws up a message that reads ' - Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.
I've tried using another CD-ROM with the same results.
I've also tried deleting the device and re-installing, updating the river to no avail.
Can anyone tell me haw to fix this in Windows ever life involving Vista?

Does these help?
http://social.msdn.microsoft.com/Forums/en-US/windowscompatibility/thread/cbbfde77-4def-4abb-8dd0-12...
http://barugon.wordpress.com/2008/08/01/windows-cannot-load-the-device-driver-for-this-hardware-the-...
http://en.kioskea.net/faq/sujet-1215-driver-damaged-or-missing-code-39
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Non Functional Wireless Adapter: Visible and Functional According to Device Manager Doesn't Appear in IPConfig

Hi all,
This one has me completely lost. The user normally connects via a USB wireless adapter, which stopped working a few days ago apparently of its own accord. The device is detected and reported as working by both Device Manager, and the Network Connections
menu, however it doesn't appear at all in ipconfig- Not even to say that it isn't connected to anything. When I try to connect to a network, it reports no connections available as if it was out of range. However, I'm sitting right under a known working access
point.
The device is enabled in devmgmt, there is no physical switch to disable it, and the adapter itself is tested as working both on different hardware running Windows 7 and 8, and the same hardware running Slax Linux. Wired connectivity to the affected machine
appears to be fully functional, which leads me to discount the TCP/IP stack.
I've tried the default PnP driver, the driver that came with the device on a mini-CD, and the latest driver from the manufacturer. I've also tried a completely separate USB wireless adapter, made by a different manufacturer, which proved to have the same
problem with identical symptoms.
I've been through power settings, it is set to Maximum Performance as per the default. I've checked the WLAN autoconfig service, which is running and starting automatically as it always has. I've even checked registry settings suggested elsewhere on technet,
and those are fine. System restore produced no results. Virus scan came back clean.
The only two things that seem unusual are A) the fact that the adapter doesn't appear at all in ipconfig, and that Cisco AnyConnect VPN client begins complaining in the event viewer, error description "ROUTTABLE_ERROR_GETBESTROUTE_FAILED" - Presumably
due to the sudden lack of usable interfaces
With all this, I'm out of ideas. Thanks for reading, and any suggestions (even insane ones) would be much appreciated.

Hi Blexie,
According to your update, I think you have fixed it by yourself.
I am glad to hear the issue is resolved .
Thank you for share the solution.
If you have any concerns, please do not hesitate to let us know. Thanks again, and have a great day!
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Sat P105-S2036 WinVista Device Manager does not show Tbios device

The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
What does Tbios do to serve what purpose?
Is Tbios required for WinVista? If so, how may I find the driver to install.
THANKS for an answer in advance.

The label on the bottom of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. Device Manager had always showed Tbios as a device.
During the two days starting 3 days ago, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except Device Manager no longer shows Tbios device.
I am not able to find any Tbios WinVista driver at Support.Toshiba.com for all listed Satellite P105 models.
What does Tbios do to serve what purpose?
Is Tbios required for WinVista? If so, how may I find the driver to install.
THANKS for an answer in advance.

PCI-6221 fails self-test in MAX but device manager says it's working

Hi everyone,
I bought a few PCI-6221 (37-pin) data acquisition cards and have been able to get one to work but 3 others don't work.
Device Manager sees them and says they work. MAX sees them and when I run Self Test, they fail with error number
-50002. Motherboards in non-working systems are PC Chips M957G and P25G. OS is Windows XP Pro with SP2.
I already tried uninstalling SW and the board, reinstalling SW and the
board...autodetect etc works fine. I even reformatted
the HD on one of the computers and reinstalled the OS. Anyone have any ideas? Thanks in advance. Halden
[email protected]

Thanks Tom for your suggestion to try NI-DAQ 8.0. I just saw it today. Yesterday,
I was able to isolate 3 PCI-6221-37 boards as defective because they all wouldn't work in another computer while
one other identical model card did work in that same computer. I called to arrange to return them to NI and learned
that for these 3, I needed NI-DAQ 8.0. The fourth one was okay
with NI-DAQ 7.5. Apparently, this was a known problem.
I wish NI would have simply notified me that my boards would
not work with the software sent with them and sent the NIDAQ 8.0 CD as soon as they knew rather than have me
waste a day of my engineering time trying to figure it all out. Booo NI.
One of the boards has worked for almost a day under NIDAQ 8.0. I was able to make some progress on the
system I am building. But then it stopped working. LabVIEW
(version 7.0 executable) programs would not open completely
or would open slowly. One that accessed the COM port only (no
data acquisition) did work. MAX opened very slowly or not at all
and when I click on
Devices and Interfaces, the hourglass is up for a long time and finally the + icon goes away indicating that MAX is not
aware of any devices being present. The Windows Device Manager says the board is present and working. Windows
Task Manager lists LabVIEW Runtime and MAX when only MAX is open and indicates that MAX is Not Responding.
I shut down the computer, removed the PCI-6221 board, booted it up again, and MAX is the same way. I uninstalled
MAX and NI-DAQ LabVIEW 7.0 support and then reinstalled them.
Now the MAX loading window is up for more than a minute and NIMAX.exe is listed in Task Manager's processes. After
the first minute, LabVIEW Runtime appears in the Task Manager's
Applications list. After a while longer, the MAX window finally
opens
and MAX is listed in the Applications. I click on the + icon by Devices and Interfaces in MAX and the hourglass appears
and Windows Task Manager says MAX is Not Responding. Eventually, the + icon and the hourglass go away and
the Task Manager lists LabVIEW Runtime and MAX as Running.
I shut the computer off for several minutes, started it up again, and MAX is still takes a long, long time to open.
I haven't put the PCI-6221 card back in because MAX still isn't working.
What do you suggest I do next?
Thanks
Halden

Device Manager and Desktop Software fail to work after a profile migration

Hi there,
I have just moved in a Windows Domain so I had to change my IP configuration. I have done a moveuser to move my local profile to the domain's profile. My Device Manager and, therefore, desktop software are not responding anymore. I keep receiving a message of ApploaderWEBSL-Upgrade[1].msi missing in the network location.... after a couple of hundreds of cancels, it goes away.
I have tried reinstalling the BB Original CD as an Domain Administrator selecting "4 all users". I have tried downloading the Windows Installer Cleaner. I have also tried to upgrade my device's software directly from the WEB. Finally, I have tried to "promote" my Windows Account as a Domain Admin.... nothing.
The poing is that if i log in as a Domain Admin, my device is automatically recognized by the device manager.... but I can't sink cause it's not my profile...
Everything was working before my domain enrolement and IP changes.... can anyone help me?
Thanks a lot!
Marcos.
Message Edited by mmarin on 02-13-2009 10:44 AM

Hello, The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started anything, hopefully you already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

Workspace join works, turning on device management fails

Similar Messages

Maybe you are looking for