Wrapping the text on the confirmation dialog

Can any one pls tell me how to wrap the text on a confirmation dialog?
thanks in advance.
regards
Lakshminarayanan.V

Hi,
Currently this is simply not possible. Probably later TextView UI element will be enhanced to support this (at least, this feature is at "Whish List", search this forum for word POLL), and confirmation dialogs will inherit desired behavior automatically.
For now you have to create your own component and use it pop-over window as confirmation dialog. In your component you may either use TextArea for multi-line display (quick and ugly) or split string into several context attributes and display them using several TextView UI elements (either dynamically created or pre-created till some reasonable maximum, say, 5 lines <-> 5 controls)
VS

Similar Messages

  • I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

    I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

    Another View.
    the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

  • Append hyphen automatically after the wrapping of text in the dimension field

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    I want to Append hyphen automatically after the wrapping of text in the dimension field.
    e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
    Thanks in advance,
    Nita

    Post Author: Nita_here
    CA Forum: WebIntelligence Reporting
    Thanks for your input.
    Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
    A  B  C
    1  2  3
    4  5  6
    (you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
    Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
    I wonder if there would be a way to do the things dynamically.
    Thanks in advance,
    Nita

  • Wrapping of Text in the Table UIElement

    Hi
       Is it possible to wrap the text in the header of a Table UIElement.Whenever a column heading is created it keeps extending on one single line. Any suggestions.
    ravi

    Please give a try with one of the following options..
    A similar post is also available at
    Newline in WDTextView
    <u>Option 1</u>
    1.Set the layout property of the UI element container to be GridLayout or MatrixLayout.
    2.Enable the "wrapping" property of Label or TextView to "true"
    3.Set the "width" property of the UI Element's(label/TV) Layout data to <integer>px [eg: 100px]
    3.Build and Deploy
    <u>Option 2</u>
    This option is only applicable for Labels. But for any Layout.
    1.Set the "width" property of the UI Element(label/TV) to <integer>px [eg: 100px]
    2.Enable the "wrapping" property of Label or TextView to "true"
    3.Build and Deploy
    Thanks and Regards,
    Sam Mathew

  • After upgrading to 10.2.2.12  on windows XP SP3 , itunes does not display any summary info or buttons/options. The buttons work but it does not display the text on the button or the options available.

    I recently upgraded the iTunes software to 10.2.2.12 on my Windows XP laptop. Since then, iTunes stopped displaying the Summary info
    , the text on the buttons, the various drop down options. The buttons seem to be working but I can't tell what that button is supposed to do
    or the option I am selecting. This is preventing me from syncing my photos to the laptop.
    this was not a problem with the previous version of iTunes.
    Actions taken :
    - I tried downloading iTunes again and repairing the install. That did not fix it.
    - Don't want to uninstall it as I am worried that I would lose all the songs and the purchases etc.
    1. Has anyone encountered this ?
    2. Is there a solution for this ?
    Many thanks in advance for your time and help
    Nitin

    bmalones44 wrote:
    b noir, my Windows 7 machine is having the exact same issue as nsadal, and I have already confirmed that all six of the Segoe UI fonts are installed on my computer.  Are any other Windows users having this problem with the 10.2.2.12 iTunes release?
    Yeah it does, although the problem predates version 10.2.2.12. It's been around since earlier-on in the version 10s (at least).
    It's usually Segoe UI font trouble on the Windows 7 systems too. Unfortunately, the Vortical troubleshooting technique only works on XP and Vista systems, so dealing with the issue on a Windows 7 system is trickier. (There's a bunch of different possible issues relating to the fonts that could be in play, and so the treatment tends to depend on which issue in particular you've got with the Segoe_UI fonts.)
    For discussions of various Windows 7 variations of the "Missing text" thing, and possible treatments, see the following (unfortunately, rather long) topic:
    iTunes 10.1 Missing Text

  • I DON'T want attachments to show in the text of the Mail email

    I DON'T want attachments to show in the text of the email.
    My company just switched over to Mail today. Every time we send an email with a .pdf attachment, it shows the attachment in the text body of the email. We don't want that to happen. How do I prevent this from happening?
    Mac Mini   Mac OS X (10.4.8)   Mail 2.1.1

    You can't.
    The Mail.app displays all image/photo and single page PDF attachments inline or viewed in place within the body of the message by default - sending and receiving.
    You can control-click on a viewed in place attachment and select View as Icon but the icon for the attached file will remain in the body of the message. Regardless, depending on the recipient's email client and available preference settings, such attachments may appear inline or viewed in place when the message is opened by the recipient (as with the Mail.app when receiving such attachments) or as attached files only which must be opened separately to be viewed for which the sender has no control over.
    This was a minor adjustment for me at first but I now prefer such attachments being displayed inline since I have confirmation that I selected the correct file or file names as attachments before the message is sent.

  • How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
    1.  Open Photoshop.
    2.  Select Preferences from the Edit Menu, then select General.
    3.  Change the HUD Color Picker to Hue Strip (Medium).
    4.  Select Interface from the Preferences menu on the left side of the dialog box.
    5.  Change the UI Font Size to Large in the Text area of the Preferences dialog box.
    6.  Select Experimental Features from the Preferences menu on the left side of the dialog box.
    7.  Select Scale UI 200% for high-density displays (Windows only).
    8.  Click on OK, then Exit/Quit Photoshop.
    9.  Open Photoshop and everything should be readable.

  • Trying to change the text of the command button.

    Hi.,
    Am using jdeveloper 11.1.1.6.,
    I have dragged and dropped a command button in my jsff page.
    When there is no record in my VO which dragged and dropped as a af:form the button will act as a create insert so that the text of the button should also be create Insert. If there is record the button should act as a update so that the text should also be update. I have used the follwoing code to change the text accordingly.
        public void settext(ActionEvent actionEvent) {
            // Add event code here...
            BindingContainer bc = getBindings();
            DCIteratorBinding dcIter =
                (DCIteratorBinding)bc.get("EssEeoDemInfView1Iterator");
            int e = (int)dcIter.getEstimatedRowCount();
            System.out.println (e);
            if ((e == 0)) {
                myButton.setText("CreateInsert");    // Null pointer exception occurs
            } else {
                myButton.setText("Update");  //null pointer exception occurs
        }Can any one pls help me?

    Hi Timo!
    This was the thing which i have did.
    I have dragged and dropped a command button to my jsff page.
    When i press the button a popup will show which ask the confirmation from the user.
    This is the code which i have written in my managed bean.
        public String delete_action() {
            BindingContainer bindings = getBindings();
            OperationBinding operationBinding = bindings.getOperationBinding("Delete");
            Object result = operationBinding.execute();
            Commit();
            if (!operationBinding.getErrors().isEmpty()) {
                return null;
            return null;
        public void deleteItem(DialogEvent dialogEvent)
            if (dialogEvent.getOutcome() != DialogEvent.Outcome.yes)
                delete_action();
              return;
          }I have used the EL Expression in my another button which will change it property according to the values in my row.
    #{bindings.EssEeoDemInfView1Iterator.estimatedRowCount gt 0 ? 'Update':'Create Insert'}For this button i have used the following code in my managed bean.
        public String update() {
             BindingContainer bc = getBindings();
            DCIteratorBinding dcIter =
                (DCIteratorBinding)bc.get("EssEeoDemInfView1Iterator");
            int e = (int)dcIter.getEstimatedRowCount();
            if ((e == 0)) {
                  CreateInsert();
            } else {
                   Commit();
            return null;
        }When i initially delete the record the button has not been changed to createinsert it remains as update. When i press the update am getting NULL pointer exception in CreateInsert() and Commit();

  • Do any of you have trouble reading the text on the 15" MBP?

    Does the 1440x900 resolution make it difficult to read the text on the screen?

    Not for me, but my eyes are good at close range for someone in his 60s. Those who are more farsighted and need reading glasses for close work may have more trouble.
    The things to be concerned about are the menus, dialog boxes, and other Finder and OS elements that can't be enlarged except by reducing the display resolution, which blurs everything on the display. In most applications' windows, you can easily change the font size or zoom in on the page as a whole to suit yourself. Ultimately, whether you're comfortable with the screen resolution at its native (maximum) setting is a purely personal decision that only you can make. I strongly advise you NOT to buy any computer whose display is uncomfortable to use at its native setting, because you will be looking at a blurry screen ALL the time if you have to use any LCD display at a non-native resolution.

  • Can DW CS5 automate the creation of a link based on the text in the link?

    Here's the situation.  I often find myself creating blocks of code like this:
    <a href="home?searchString=some text"><img src="..."></a>
    <a href="home?searchString=some text">some text</a>
    Is there a quick, painless way to type the "some text" part once and have DW automatically update the text in the links?  This information is not dynamically generated, so server-side scripting is not an option.
    Thanks!

    Find & Replace in the source code is the only way I'm aware of.

  • How to change the text in the legend of a graph programmat​ically in labview

    I have many graphs in one plot and want to show the legend the name of the graph (i.e. the filename). How do I change the text in the legend programmatically?

    Create a property node for your graph. Use the property node "Active Plot" to define which plot (or line) you want to rename. Then write the new legend label to the property node "Plot.Name". See attached.
    Tim
    Attachments:
    legend.vi ‏12 KB

  • The text in the tables is hazy when printed in the new version of pages. How can I get this to the same clear text as before?

    In the new version of Pages, the text in the tables are no long clear and sharp as before, they look embedded on all print outs. How can I change this.

    You can do a check for corrupted fonts and other font issues:
    *http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
    *http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

  • In popup step how do I get the "text on the button" in the report rather than button index?

    (1)
    How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
    step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
    hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
    OUT PUT IS 30?" button hit.
    (2)
    In popup step how do I get the "text on the button" in the report rather than button index?
    File attached
    Attachments:
    test_stand.zip ‏32 KB

    The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
    The easiest is to use the reporttext.
    In a post expression, you can use something like
    Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
    and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
    Just my 2cents
    S.
    // it takes almost no time to rate an answer
    Attachments:
    IncludeButtonTextInReport2_0.seq ‏18 KB

  • I'm using Acrobat Pro 11. When printing an email to PDF most of the time it cuts off the text on the right margin. Setting look OK and I've moved things around on the email, but that doesn't seem to make any difference. Is there an Adobe setting I'm missi

    Like I said above, print to Adobe pdf and it wants to cut off the text on the right margin. I can't see to find a setting that changes this. Any ideas??

    OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
    So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
    Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

  • Is there a way of just changing the text to the main menu..but not the submenus?

    Is there a way of just changing the text to the main
    menu..but not the submenus?
    Also i have looked at in the browser and when i glide over
    the menu catergories or click on them they dont show the
    submenu...what can i do to solve this?

    Does the example described at
    http://labs.adobe.com/technologies/spry/articles/menu_bar/index.html
    work for you?
    What are you doing that's different from the example?
    When you say you just want to change the text of the main
    menu without changing the submenus, do you mean you want to do so
    dynamically, at some later stage after the page has loaded?
    If so, you could try retrieving the main menu elements you
    want to update from the DOM and updating them from your script's
    event handler for whatever event it is that you want to update them
    in response to. This presumes the widget will detect this and
    update appropriately, which I can't say for sure since I haven't
    actually tried it.
    Hope that helps!
    Rob

Maybe you are looking for