Wrong Register Updation for consumable material

Hello Gurus,
I am getting problem for consumable material for which excise duty is applicable. Normally after making GR for these type of material RG23A Part I and RG23A part II registers should get updated but I am facing problem that for these material currently RG23C register is getting updated.
Kindly help me to resolve this issue.
Warm Regards
Kishor Hole

Hello, I have already checked this scenario with material code and without material code. I am taking care of Material type in J1ID and it is consumable only. Also at the time of GR in Excise Item tab I am verifying for material type and chapter id but it is still updating to RG23C register.
      Please help me out for the solution
Warm Regards
Kishor Hole

Similar Messages

  • ME51N for consumable Material through COST CENTER

    Hi all
    I got the ERROR : <b>Create Acc. 400000 for 19.09.2007 as a cost element in controlling area 1000</b>.
    This error came when i was creating PR for consumable material i.e. Tcode ME51N
    Help me solve this Problem
    Pradeep

    Hi Pradeep,
    You are creating PR for consumable material with account assignment as K probably
    your account 40000 is not defined as cost element in controlling you will assogn a cost center for your account
    You can do so in FS00 By assigning a cost center to your G/L and declaring it as cost element in controlling but better to do the same in consultation with FICO
    Regards
    Diwakar
    reward if useful

  • Wrong Register Updation

    Hi All,
    Currently the excise duty of the consumable materials  are updated in RG23C instead of RG23A.(While doing goods receipt the small POP-up screen is appearing for capturing the excise details ,in that screen the system is fetching RG23c register as default for consumable purchase order ).can anyone give me the solution for sloving  this problem ?
    Regards,
    Renuga.A

    Hi
    Material type                        Register affected
    Assets, tools, consumables   RG 23C
    Raw materials                       RG 23A
    Finished goods                     RG 1
    Input excise duty on raw materials, for example, can usually be deducted in full from the output duty, whereas the duty on capital goods can be deducted over two years: 50% in the current year, 50% in the following year
    Regards
    Prasanna

  • CVD and Excise Register Update for Free of charge Imported Material

    Hi,
    This is a scenario of Import Purchasing of Free Goods for which no price is paid to the Vendor. But the Custom and CVD Payment need to be made and we want to take benefit of CVD duties and update the Excise Register.
    Can anyone provide some idea to resolve this?
    Thanks in advance

    While trying to post Excise Invoice Value in J1IEX without Purchase Order I am getting an error "GL account has not been assigned for RG23ASED in customization"
    Does it mean G/L account needs to be assigned against EWPO for RG23ASED in customization or something is going wrong?
    Because I havenu2019t put any duty value under SED in J1IEX.

  • Standard cost update for configurable material- CU50

    Hi,
    I am trying to update standard cost for a configurable material using CU50 with reference to the sales order.
    System gives a warning message :- Configuration of raw material still not included in price determination
    Message no. CK784
    Also the save tab is greyed out.
    this is the case with all config material
    A solution to this would be highly appreciated.
    Thanks

    Hi,
       Refer note 362193 and check if that helps.
    regards
    Waman

  • Contract updation for Delivered material quantity

    Hi All,
    I have a problem related, contract and release order updating with reference to delivered material quantity.
    for example let's say contract is created for 1000 units of material A, after that sales order with reference to contract is created for 500 units and delivery is created for 300 units then remaining order quantity cannot be delivered as  customer master is maintained so.
    Now I want to create sales order for 700 units of 'A' but system is not allowing to do so saying the 500 units are already referenced.
    If i use rejection reason in sales order still system is not allowing to create a new sales order with 700 units.
    How to solve this issue?
    Please Help
    Thanks and regards
    Amit

    Hi Manam,
    thank you very much for your immediate reply.
    But the issue is a sales order will have only one delivery as the sales order contains freight amount at header level which helps calculate the excise duties as the prices quoted to customer include freight and duties.
    So now is that possible to update the delivered quantity at contract level so that undelivered quantity can be referenced to create another sales order and can be delivered.
    To describe the process:
    A contract will be created, a sales order will be created for required delivery quantity then delivery will be created. In case due to some problems if delivery quantity is less than sales order then the undelivered quantity will be getting updated in sales order. and the sales order undelivered quantity will be rejected and the contract will get updated.
    Please help.
    Regards
    Amit

  • Exc reg updation for trading material

    Hi experts,
            I have a trading material, at the time of purchase RG23A reg is updating both quantity and value.
            But while sales, RG1 reg is not updating.
            As Excise is concerned, at the time of sales the quantity in RG23A should be deducted and RG1 also should be deducted.
           Is there any specific configuration required for this kind of scenerio.
          for eg.  if i am purchasing 100 quantity.
                           RG23A part 1      RG23A part 11               RG1
                                 +100                   Value                        +100
                       if i am selling  100 quantity
                           RG23A part 1                   RG1
                                 -100                          -100
    can anybody help.

    hi..
            to achieve this...
                  when u receive material from vendor RG23A reg both quantity and value will be updated..
    for eg- rg23 a part i  shows a quantity of 100
                  then u have to create some mov type copying existing and issue material to finished store, and assign in specify mov type for excise invoice in tax on goods movement, which should update both rg23a part 1 and rg1
    for eg-  rg23 a part 1 should show 000 quantity and rg1 should show 100
    then u sell the material which will update rg1 reg...
             anybody who can suggest which mov type should be copied....

  • RG1 Updation for new material

    Dear Guru's,
    It means that every time when ever users produce new material he must update RG1 material in table J_2IRG1BAL only. Is there any other option to maintain through other process?
    Here we are using the ECC 6. Initially we uploaded the data of all materials through using ABAP programmer. My question is that when ever users produce new material he must update through  table J_2IRG1BAL only or any other option.
    I tried in DEV client that i created new material and initially I posted the stock using MB1C T-code with movement type 561 to pre-bonded storage location after that I transferred the stock MB1B T-code with movement type 311 to bonded storage location.
    Then I created SO, DEL, INVOICE, EXCISE INVOICE, after this I have updated RG1 using T-code J1I5 with classification RMA and IDH, system is showing the QTY, Material after this i have done Extracted Using T-Code J2I5. When I am taking print out through excel it not showing the opening balance and closing balance.
    Please suggest me the correct one.
    Best Regards,
    Siddarth

    Dear Rajesh,
    It means no need to maintain in table level, every time when ever user creates new material.
    with this the opening and closing balance is not showing J1i5.
    Regards,
    siddarth

  • Consumable Material type tax register updation

    Dear friends
    When to capture and post the excise invoice for Consumable material type,
    Material need to update on 23 A register. But its is updating on 23C register.
    How to rectify this error?  Where we can assign the consumable material type with 23 A register?
    regards

    Hi,
    Check the Material & Chapter ID combination in J1ID transaction
    If you assign the material type as Raw Material in the above settings for your Material, Plant & Chapter ID combination, RG23A Register will be updated.
    Thanks & Regards,

  • Exit for register updation

    Hi All,
    We are facing problem in register updation for refurbishment process (through plant maintainence). During the process thay will take the material in stock with valuation type C2-Repair & issue C2 if got repaired and use C3-Scrap if material scraped. During this process mvt types 261,262,101 takes place and registers updates accordingly. So my querry is to avoid updation of registers during this process since it is internal process and it should not affect the same. Please suggest and also let me know any user exits are there for the same.
    RB

    Hi All,
    Any inputs on above subject,,,,

  • Issue regarding 0MATERIAL_ATTR  - Attribute not Updated for Some Materials

    Hi All,
    As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
    After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
    After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
    I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
    I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
    I had also activated master data by running Attribute change run but still problem persist.
    Please help.
    Regards,
    Divyesh Khambhati

    Hi Venkatesh,
    I had write code in CMOD for MRP controller.
    As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
    if I take one example..
    For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
    Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
    I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
    please help.
    regards,
    Divyesh Khambhati

  • Reg:Consumable material in Sub con scenario

    Hi experts,
       I have an issue in sub-con scenario.For consumable material we are not maintained in  BOM .For this how to map in sap for inventory purpose or how to knock of the consumables stock at sub- con place.Kindly suggest me .
    Thanks in advance
    vichu

    Hi Experts,
       For finished goods i maintained BOM,for consumable item not maintained in BOM,now i want to issue the consumable item to sub -con & it should be accountable or it should show that has been consumed in that finh goods .For this pls suggest me & i am in a urgency.
    Thanks in advance
    vichu

  • Consumable Material in WH

    Hi experts,
    I am fresher in this SAP world...need ur comments..
    Scenario :-
    we create PO for consumable material with A/c assignment - K, while receiving goods - We don't want to issue total qty in cost Center currently.
    Can we stock this material for some time in WH & then issue to Cost Center later??
    Thanks in advance...
    Regards,
    Julie

    no.
    with an account assigned PO you do not create any inventory while performing a goods receipt.
    if you want store the material for a certain time, then you must not define it as consumable, then it is just a stock item.
    Of course you can charge the costs immediaty and store the quantity non-valuated. In this case create a material master with material type UNBW. SAP will force you to enter an account assignment in the PO but it will create stock when doing the receipt.

  • Stock and consumable material

    what is difference between stock and consumable material?
    How to cancel an invoice,GR,PO,PR,PIR?
    What  questions we may expect for interview in MM nad for written test also

    Hi,
    Answer to your first question form material valuation point of view.
    1. Difference between Stock and consumables materials.
    Automatic account assignment occurs for a stock material with a material type that allows for inventory management.  At posting time, data from the material master record determines which G/L accounts to hit.  For automatic account assignment, the account assignment category field is left blank.
    For consumable material may or may not have a material master record.  A consumable material with a material master record would be for example, a material whose material type does not allow for inventory management (ex: pencils, paper, staplers, etc.).  When creating a requisition for one of these consumable materials, you must enter something in the account assignment category field.
    When an account assignment category is specified, an additional pop-up window appears for entering the account assignment data.
    Regards,
    Prashanth Pai

  • CK40N - Update for material with price control 'V'

    i Experts,
    When im running standard cost estimate in CK40N, say for material types semi finished. The components that is raw materials of the SFG is also updated with the price, meaning for a raw material with price control 'V' has a price of 10, after
    releasing the cost estimate for the SFG, when i look into the material master of raw material, the price of 10 is also updated
    in the standard price.
    I am not sure why this is happening, i believe it should not happen. Because in the valuation variant, if i give the strategy as standard price, this price is easily picked up. And more over with price control 'V', i can change the standard price. Can anybody throw some light on this.
    Best regards
    gj

    Hi Rakesh,
    Thanks for the information. But i do agree even during release there is no impact on the inventory. But in my cost variant, say in PPC1, if i give the strategy say 1. standard price 2. moving average price, during cost estimate run, its going to take the standard price for the material irrespective of the price derived automatically for moving average price. For eg in our case for raw material with price control 'V' after sce run if the standard price is 10 and moving average price is 14, as per strategy of PPC1 above its going to take 10 and not 14.
    Is there any other way to avoid this. Please correct me if i had went wrong somewhere.
    Best regards
    gj

Maybe you are looking for