Wrong Xorg resolution+wicd error.
Hey fellas.
I'm kidna new in arch. I got my system up and running with kde 4.3
but yet I'm having a few issues.
1. The system doesn't detect the correct screen resolution. it's a 1280x800 screen toshiba laptop with intel X4500mhd.
I've tried tweaking xorg.conf. it didn't help much so I'm attaching xorg.conf
the system sets the resolution by default to 1024x768.
2. I configured wicd to start automatically with kde (was this the right way to do it? just adding it to the startup applications?) but yet, everytime the X starts the system asks me for a root password for wicd. even after i enter it the X throws a message that it can't connect to wicd's D-bus. how can these issues be solved?
Thanks!
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "record"
Load "dri2"
Load "glx"
Load "dbe"
Load "extmod"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Module"
Load "dri"
Load "record"
Load "dri2"
Load "glx"
Load "dbe"
Load "extmod"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "1280x800_60.00" 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync
Option "PreferredMode" "1280x800"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Last edited by ohadbasan (2009-08-19 00:29:11)
Wow.
you people are fast.
Ashren - your solution solved the resolution problem. many thanks. I was sure that the intel driver is built in the kernel therefore no need to d/l it manually.
ludovico - I didn't know that wicd is a daemon. thought it just an application. so as you said I added it to rc.conf and now everything works great.
can you guys plz direct me to some good documentation? I hate asking stupid questions.
thanks!
Similar Messages
-
Xorg: symbol lookup error: path : undifined symbol: LoaderReqSymLists
having problems with xorg.
first noticed something was wrong when i ran Xorg -configure (yes, i now realize that this is an outdated method)
the output from that was:
X.Org S Server 1.11.3
Release Date: 2011-12-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.1.5-1-ARCH x86-64
Current Operating System: Linux rustyTower 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86-64
Kernel command line: root=/dev/sda1 ro
Build Date: 17 December 2011 09:17:41AM
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--)probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/var/log/Xorg.0.log", Time; Fri Dec 23 10:46:23 2011
List of video drivers:
rendition
cirrus
ati
s3virge
mach64
savage
i740
r128
v4l
xgixp
tdfx
sis
apm
ast
glint
radeon
sisusb
vmware
nv
i128
dummy
intel
ark
siliconmotion
mga
trident
neomagic
vmwlegacy
s3
voodoo
xgi
chips
tseng
fbdev
vesa
Xorg: symbol lookup error: /usr/lib/xorg/modules/drivers/xgixp_drv.so: undefined symbol: LoaderReqSymLists
the /var/log/Xorg.0.log file is
[ 3881.044]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 3881.044] X Protocol Version 11, Revision 0
[ 3881.044] Build Operating System: Linux 3.1.5-1-ARCH x86_64
[ 3881.046] Current Operating System: Linux rustyTower 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86_64
[ 3881.047] Kernel command line: root=/dev/sda1 ro
[ 3881.048] Build Date: 17 December 2011 09:17:41AM
[ 3881.050]
[ 3881.051] Current version of pixman: 0.24.0
[ 3881.053] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3881.056] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3881.060] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 23 11:03:22 2011
[ 3881.061] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3881.063] (==) No Layout section. Using the first Screen section.
[ 3881.063] (==) No screen section available. Using defaults.
[ 3881.063] (**) |-->Screen "Default Screen Section" (0)
[ 3881.063] (**) | |-->Monitor "<default monitor>"
[ 3881.063] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3881.063] (==) Automatically adding devices
[ 3881.063] (==) Automatically enabling devices
[ 3881.063] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 3881.063] Entry deleted from font path.
[ 3881.063] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3881.063] Entry deleted from font path.
[ 3881.063] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 3881.063] Entry deleted from font path.
[ 3881.063] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 3881.063] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3881.063] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3881.063] (II) Loader magic: 0x7ccae0
[ 3881.063] (II) Module ABI versions:
[ 3881.063] X.Org ANSI C Emulation: 0.4
[ 3881.063] X.Org Video Driver: 11.0
[ 3881.063] X.Org XInput driver : 13.0
[ 3881.063] X.Org Server Extension : 6.0
[ 3881.064] (--) PCI:*(0:2:0:0) 1002:9498:1458:21c5 rev 0, Mem @ 0xd0000000/268435456, 0xfebf0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 3881.064] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3881.064] (II) LoadModule: "extmod"
[ 3881.064] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3881.064] (II) Module extmod: vendor="X.Org Foundation"
[ 3881.064] compiled for 1.11.3, module version = 1.0.0
[ 3881.064] Module class: X.Org Server Extension
[ 3881.064] ABI class: X.Org Server Extension, version 6.0
[ 3881.064] (II) Loading extension MIT-SCREEN-SAVER
[ 3881.064] (II) Loading extension XFree86-VidModeExtension
[ 3881.064] (II) Loading extension XFree86-DGA
[ 3881.064] (II) Loading extension DPMS
[ 3881.064] (II) Loading extension XVideo
[ 3881.064] (II) Loading extension XVideo-MotionCompensation
[ 3881.064] (II) Loading extension X-Resource
[ 3881.064] (II) LoadModule: "dbe"
[ 3881.064] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 3881.064] (II) Module dbe: vendor="X.Org Foundation"
[ 3881.064] compiled for 1.11.3, module version = 1.0.0
[ 3881.064] Module class: X.Org Server Extension
[ 3881.064] ABI class: X.Org Server Extension, version 6.0
[ 3881.064] (II) Loading extension DOUBLE-BUFFER
[ 3881.064] (II) LoadModule: "glx"
[ 3881.065] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3881.065] (II) Module glx: vendor="X.Org Foundation"
[ 3881.065] compiled for 1.11.3, module version = 1.0.0
[ 3881.065] ABI class: X.Org Server Extension, version 6.0
[ 3881.065] (==) AIGLX enabled
[ 3881.065] (II) Loading extension GLX
[ 3881.065] (II) LoadModule: "record"
[ 3881.065] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3881.065] (II) Module record: vendor="X.Org Foundation"
[ 3881.065] compiled for 1.11.3, module version = 1.13.0
[ 3881.065] Module class: X.Org Server Extension
[ 3881.065] ABI class: X.Org Server Extension, version 6.0
[ 3881.065] (II) Loading extension RECORD
[ 3881.065] (II) LoadModule: "dri"
[ 3881.065] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3881.065] (II) Module dri: vendor="X.Org Foundation"
[ 3881.065] compiled for 1.11.3, module version = 1.0.0
[ 3881.065] ABI class: X.Org Server Extension, version 6.0
[ 3881.065] (II) Loading extension XFree86-DRI
[ 3881.065] (II) LoadModule: "dri2"
[ 3881.065] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3881.065] (II) Module dri2: vendor="X.Org Foundation"
[ 3881.065] compiled for 1.11.3, module version = 1.2.0
[ 3881.065] ABI class: X.Org Server Extension, version 6.0
[ 3881.065] (II) Loading extension DRI2
[ 3881.065] (==) Matched ati as autoconfigured driver 0
[ 3881.065] (==) Matched vesa as autoconfigured driver 1
[ 3881.065] (==) Matched fbdev as autoconfigured driver 2
[ 3881.065] (==) Assigned the driver to the xf86ConfigLayout
[ 3881.065] (II) LoadModule: "ati"
[ 3881.066] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 3881.066] (II) Module ati: vendor="X.Org Foundation"
[ 3881.066] compiled for 1.11.1.902, module version = 6.14.3
[ 3881.066] Module class: X.Org Video Driver
[ 3881.066] ABI class: X.Org Video Driver, version 11.0
[ 3881.066] (II) LoadModule: "radeon"
[ 3881.066] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3881.066] (II) Module radeon: vendor="X.Org Foundation"
[ 3881.066] compiled for 1.11.1.902, module version = 6.14.3
[ 3881.066] Module class: X.Org Video Driver
[ 3881.066] ABI class: X.Org Video Driver, version 11.0
[ 3881.066] (II) LoadModule: "vesa"
[ 3881.066] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3881.066] (II) Module vesa: vendor="X.Org Foundation"
[ 3881.066] compiled for 1.11.1, module version = 2.3.0
[ 3881.066] Module class: X.Org Video Driver
[ 3881.066] ABI class: X.Org Video Driver, version 11.0
[ 3881.066] (II) LoadModule: "fbdev"
[ 3881.066] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3881.066] (II) Module fbdev: vendor="X.Org Foundation"
[ 3881.066] compiled for 1.10.99.902, module version = 0.4.2
[ 3881.067] ABI class: X.Org Video Driver, version 11.0
[ 3881.067] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS
[ 3881.070] (II) VESA: driver for VESA chipsets: vesa
[ 3881.070] (II) FBDEV: driver for framebuffer: fbdev
[ 3881.070] (--) using VT number 7
[ 3881.081] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3881.081] (II) [KMS] Kernel modesetting enabled.
[ 3881.081] (WW) Falling back to old probe method for vesa
[ 3881.081] (WW) Falling back to old probe method for fbdev
[ 3881.081] (II) Loading sub module "fbdevhw"
[ 3881.081] (II) LoadModule: "fbdevhw"
[ 3881.082] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3881.082] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3881.082] compiled for 1.11.3, module version = 0.0.2
[ 3881.082] ABI class: X.Org Video Driver, version 11.0
[ 3881.082] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3881.082] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3881.082] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3881.082] (==) RADEON(0): Default visual is TrueColor
[ 3881.082] (==) RADEON(0): RGB weight 888
[ 3881.082] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3881.082] (--) RADEON(0): Chipset: "ATI RV730 PRO [Radeon HD 4650]" (ChipID = 0x9498)
[ 3881.082] (II) RADEON(0): PCIE card detected
[ 3881.082] drmOpenDevice: node name is /dev/dri/card0
[ 3881.082] drmOpenDevice: open result is 8, (OK)
[ 3881.082] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 3881.082] drmOpenDevice: node name is /dev/dri/card0
[ 3881.082] drmOpenDevice: open result is 8, (OK)
[ 3881.082] drmOpenByBusid: drmOpenMinor returns 8
[ 3881.082] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 3881.082] (II) Loading sub module "exa"
[ 3881.082] (II) LoadModule: "exa"
[ 3881.082] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3881.082] (II) Module exa: vendor="X.Org Foundation"
[ 3881.082] compiled for 1.11.3, module version = 2.5.0
[ 3881.082] ABI class: X.Org Video Driver, version 11.0
[ 3881.082] (II) RADEON(0): KMS Color Tiling: enabled
[ 3881.082] (II) RADEON(0): KMS Pageflipping: enabled
[ 3881.082] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 3881.086] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 3881.106] (II) RADEON(0): Output VGA-0 has no monitor section
[ 3881.162] (II) RADEON(0): Output DVI-0 has no monitor section
[ 3881.166] (II) RADEON(0): EDID for output HDMI-0
[ 3881.186] (II) RADEON(0): EDID for output VGA-0
[ 3881.242] (II) RADEON(0): EDID for output DVI-0
[ 3881.242] (II) RADEON(0): Manufacturer: ACR Model: 120 Serial#: 270597208
[ 3881.242] (II) RADEON(0): Year: 2011 Week: 2
[ 3881.242] (II) RADEON(0): EDID Version: 1.3
[ 3881.242] (II) RADEON(0): Digital Display Input
[ 3881.242] (II) RADEON(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 3881.242] (II) RADEON(0): Gamma: 2.20
[ 3881.242] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[ 3881.242] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3881.242] (II) RADEON(0): First detailed timing is preferred mode
[ 3881.242] (II) RADEON(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 3881.242] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 3881.242] (II) RADEON(0): Supported established timings:
[ 3881.242] (II) RADEON(0): 720x400@70Hz
[ 3881.242] (II) RADEON(0): 640x480@60Hz
[ 3881.242] (II) RADEON(0): 640x480@67Hz
[ 3881.242] (II) RADEON(0): 640x480@72Hz
[ 3881.242] (II) RADEON(0): 800x600@56Hz
[ 3881.242] (II) RADEON(0): 800x600@60Hz
[ 3881.242] (II) RADEON(0): 800x600@72Hz
[ 3881.242] (II) RADEON(0): 1024x768@60Hz
[ 3881.242] (II) RADEON(0): 1024x768@70Hz
[ 3881.242] (II) RADEON(0): Manufacturer's mask: 10
[ 3881.242] (II) RADEON(0): Supported standard timings:
[ 3881.242] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 3881.242] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 3881.242] (II) RADEON(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 3881.242] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 3881.242] (II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 3881.242] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 3881.242] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 3881.242] (II) RADEON(0): Supported detailed timing:
[ 3881.242] (II) RADEON(0): clock: 138.5 MHz Image Size: 521 x 293 mm
[ 3881.242] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 3881.242] (II) RADEON(0): v_active: 1080 v_sync: 1082 v_sync_end 1087 v_blanking: 1111 v_border: 0
[ 3881.242] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 84 kHz, PixClock max 185 MHz
[ 3881.242] (II) RADEON(0): Serial No: LK60C0134030
[ 3881.242] (II) RADEON(0): Monitor name: G235H
[ 3881.242] (II) RADEON(0): EDID (in hex):
[ 3881.242] (II) RADEON(0): 00ffffffffffff000472200158fc2010
[ 3881.242] (II) RADEON(0): 0215010380341d78eade95a3544c9926
[ 3881.242] (II) RADEON(0): 0f5054bb8c10b300714f810095008180
[ 3881.242] (II) RADEON(0): 81c0d1c001011a3680a070381f403020
[ 3881.242] (II) RADEON(0): 250009252100001f000000fd00384b1f
[ 3881.242] (II) RADEON(0): 5412000a202020202020000000ff004c
[ 3881.242] (II) RADEON(0): 4b363043303133343033300a000000fc
[ 3881.242] (II) RADEON(0): 0047323335480a2020202020202000e4
[ 3881.242] (II) RADEON(0): Printing probed modes for output DVI-0
[ 3881.242] (II) RADEON(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1082 1087 1111 +hsync +vsync (66.6 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 3881.242] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 3881.242] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 3881.242] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 3881.242] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 3881.242] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 3881.242] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 3881.242] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3881.242] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3881.242] (II) RADEON(0): Output HDMI-0 disconnected
[ 3881.242] (II) RADEON(0): Output VGA-0 disconnected
[ 3881.242] (II) RADEON(0): Output DVI-0 connected
[ 3881.242] (II) RADEON(0): Using exact sizes for initial modes
[ 3881.242] (II) RADEON(0): Output DVI-0 using initial mode 1920x1080
[ 3881.242] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3881.242] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:f7d7000
[ 3881.242] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 3881.242] (==) RADEON(0): DPI set to (96, 96)
[ 3881.242] (II) Loading sub module "fb"
[ 3881.242] (II) LoadModule: "fb"
[ 3881.242] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3881.243] (II) Module fb: vendor="X.Org Foundation"
[ 3881.243] compiled for 1.11.3, module version = 1.0.0
[ 3881.243] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3881.243] (II) Loading sub module "ramdac"
[ 3881.243] (II) LoadModule: "ramdac"
[ 3881.243] (II) Module "ramdac" already built-in
[ 3881.243] (II) UnloadModule: "vesa"
[ 3881.243] (II) Unloading vesa
[ 3881.243] (II) UnloadModule: "fbdev"
[ 3881.243] (II) Unloading fbdev
[ 3881.243] (II) UnloadModule: "fbdevhw"
[ 3881.243] (II) Unloading fbdevhw
[ 3881.243] (--) Depth 24 pixmap format is 32 bpp
[ 3881.243] (II) RADEON(0): [DRI2] Setup complete
[ 3881.243] (II) RADEON(0): [DRI2] DRI driver: r600
[ 3881.243] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 3881.243] (II) RADEON(0): Front buffer size: 8100K
[ 3881.243] (II) RADEON(0): VRAM usage limit set to 221119K
[ 3881.243] (==) RADEON(0): Backing store disabled
[ 3881.243] (II) RADEON(0): Direct rendering enabled
[ 3881.243] (II) RADEON(0): Setting EXA maxPitchBytes
[ 3881.243] (II) EXA(0): Driver allocated offscreen pixmaps
[ 3881.243] (II) EXA(0): Driver registered support for the following operations:
[ 3881.243] (II) Solid
[ 3881.243] (II) Copy
[ 3881.243] (II) Composite (RENDER acceleration)
[ 3881.243] (II) UploadToScreen
[ 3881.243] (II) DownloadFromScreen
[ 3881.243] (II) RADEON(0): Acceleration enabled
[ 3881.243] (==) RADEON(0): DPMS enabled
[ 3881.243] (==) RADEON(0): Silken mouse enabled
[ 3881.243] (II) RADEON(0): Set up textured video
[ 3881.243] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 3881.243] (II) RADEON(0): [XvMC] Extension initialized.
[ 3881.243] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3881.243] (--) RandR disabled
[ 3881.243] (II) Initializing built-in extension Generic Event Extension
[ 3881.243] (II) Initializing built-in extension SHAPE
[ 3881.243] (II) Initializing built-in extension MIT-SHM
[ 3881.243] (II) Initializing built-in extension XInputExtension
[ 3881.243] (II) Initializing built-in extension XTEST
[ 3881.243] (II) Initializing built-in extension BIG-REQUESTS
[ 3881.243] (II) Initializing built-in extension SYNC
[ 3881.243] (II) Initializing built-in extension XKEYBOARD
[ 3881.243] (II) Initializing built-in extension XC-MISC
[ 3881.243] (II) Initializing built-in extension SECURITY
[ 3881.243] (II) Initializing built-in extension XINERAMA
[ 3881.243] (II) Initializing built-in extension XFIXES
[ 3881.243] (II) Initializing built-in extension RENDER
[ 3881.243] (II) Initializing built-in extension RANDR
[ 3881.243] (II) Initializing built-in extension COMPOSITE
[ 3881.243] (II) Initializing built-in extension DAMAGE
[ 3881.251] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3881.251] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3881.251] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3881.251] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 3881.251] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3881.251] (II) AIGLX: Loaded and initialized r600
[ 3881.251] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3881.252] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 3881.334] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3881.334] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3881.334] (II) LoadModule: "evdev"
[ 3881.334] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3881.335] (II) Module evdev: vendor="X.Org Foundation"
[ 3881.335] compiled for 1.10.99.902, module version = 2.6.0
[ 3881.335] Module class: X.Org XInput Driver
[ 3881.335] ABI class: X.Org XInput driver, version 13.0
[ 3881.335] (II) Using input driver 'evdev' for 'Power Button'
[ 3881.335] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3881.335] (**) Power Button: always reports core events
[ 3881.335] (**) Power Button: Device: "/dev/input/event3"
[ 3881.335] (--) Power Button: Found keys
[ 3881.335] (II) Power Button: Configuring as keyboard
[ 3881.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3881.335] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3881.335] (**) Option "xkb_rules" "evdev"
[ 3881.335] (**) Option "xkb_model" "evdev"
[ 3881.335] (**) Option "xkb_layout" "us"
[ 3881.358] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3881.358] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3881.358] (II) Using input driver 'evdev' for 'Power Button'
[ 3881.358] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3881.359] (**) Power Button: always reports core events
[ 3881.359] (**) Power Button: Device: "/dev/input/event2"
[ 3881.359] (--) Power Button: Found keys
[ 3881.359] (II) Power Button: Configuring as keyboard
[ 3881.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 3881.359] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3881.359] (**) Option "xkb_rules" "evdev"
[ 3881.359] (**) Option "xkb_model" "evdev"
[ 3881.359] (**) Option "xkb_layout" "us"
[ 3881.359] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP (/dev/input/event5)
[ 3881.359] (II) No input driver/identifier specified (ignoring)
[ 3881.359] (II) config/udev: Adding input device Logitech (/dev/input/event1)
[ 3881.359] (**) Logitech: Applying InputClass "evdev pointer catchall"
[ 3881.359] (II) Using input driver 'evdev' for 'Logitech'
[ 3881.359] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3881.359] (**) Logitech: always reports core events
[ 3881.359] (**) Logitech: Device: "/dev/input/event1"
[ 3881.359] (--) Logitech: Found 3 mouse buttons
[ 3881.359] (--) Logitech: Found scroll wheel(s)
[ 3881.359] (--) Logitech: Found relative axes
[ 3881.359] (--) Logitech: Found x and y relative axes
[ 3881.359] (II) Logitech: Configuring as mouse
[ 3881.359] (II) Logitech: Adding scrollwheel support
[ 3881.359] (**) Logitech: YAxisMapping: buttons 4 and 5
[ 3881.359] (**) Logitech: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3881.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1/event1"
[ 3881.359] (II) XINPUT: Adding extended input device "Logitech" (type: MOUSE, id 8)
[ 3881.359] (II) Logitech: initialized for relative axes.
[ 3881.360] (**) Logitech: (accel) keeping acceleration scheme 1
[ 3881.360] (**) Logitech: (accel) acceleration profile 0
[ 3881.360] (**) Logitech: (accel) acceleration factor: 2.000
[ 3881.360] (**) Logitech: (accel) acceleration threshold: 4
[ 3881.360] (II) config/udev: Adding input device Logitech (/dev/input/mouse0)
[ 3881.360] (II) No input driver/identifier specified (ignoring)
[ 3881.360] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3881.360] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3881.360] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3881.360] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3881.360] (**) AT Translated Set 2 keyboard: always reports core events
[ 3881.360] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3881.360] (--) AT Translated Set 2 keyboard: Found keys
[ 3881.360] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3881.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3881.360] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 3881.360] (**) Option "xkb_rules" "evdev"
[ 3881.360] (**) Option "xkb_model" "evdev"
[ 3881.360] (**) Option "xkb_layout" "us"
[ 3881.360] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 3881.360] (II) No input driver/identifier specified (ignoring)
[ 4330.702] (II) Power Button: Close
[ 4330.703] (II) UnloadModule: "evdev"
[ 4330.703] (II) Unloading evdev
[ 4330.746] (II) Power Button: Close
[ 4330.746] (II) UnloadModule: "evdev"
[ 4330.746] (II) Unloading evdev
[ 4330.849] (II) Logitech: Close
[ 4330.849] (II) UnloadModule: "evdev"
[ 4330.849] (II) Unloading evdev
[ 4330.956] (II) AT Translated Set 2 keyboard: Close
[ 4330.956] (II) UnloadModule: "evdev"
[ 4330.956] (II) Unloading evdev
[ 4330.980] Server terminated successfully (0). Closing log file.
after i execute:
pacman -S xorg-xinit xorg-twm xorg-xclock xterm
both xinit and startx work fine; i can use the keyboard and mouse
so far i've tried reinstalling / updating with:
pacman -S xorg
pacman -S xorg-server
pacman -S xorg-apps
pacman -S xf86-video-ati
the thread https://bbs.archlinux.org/viewtopic.php?id=126754 recommends removing the extra drivers (i have them all downloaded) by using this command:
pacman -Rns $(pacman -Qqs xorg-drivers | grep -v xf86-input-evdev)
the output that i get is:
error: '1.5.0-2': target not found
when i try to run fluxbox i get:
Error: Couldn't connect to XServer
the output i get from lspci | grep VGA is:
02.00 VGA compatible controller: ATI Technologies Inc RV730 PRO [Radeon HD 4650]
a similar problem was reported at https://bugzilla.novell.com/show_bug.cgi?id=667877
i really don't know what they are talking about with using 'nomodset' and i'm not even sure that it applies to my situation
hope thats enough info to get started on solving this problemplayed around with the .xinitrc file for a while after i got home from work and was able to get fluxbox running. i would say problem solved, but i guess there wasn't really a problem after all, just lack of reading.
don't know how i overlooked the wiki documentation on .xinitrc found at https://wiki.archlinux.org/index.php/Xinitrc
mods please close this thread. -
Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
My iPhone is in recovery mode, But once it's done with the process a tab comes up saying there was something wrong restoring it (1015) error. Any suggestions of how I could fix this?
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
In other words:
The backup to which you're trying to restore was created with a lower or previos version of iOS than the one installed on your iPhone during the recovery. If this is the case then you'll be unable to restore your phone with that backup and you'll have to set your iPhone up as new. Or,
Your iPhone was/is jailbroken. If this is the case, there is nothing anyone here or at Apple can do for you. -
Index construction for InfoCube went wrong due to SQL Error
Hello,
I searched the topic before posting most of them suggested to delete index manually and create it and check in RSRV and SE38 prg to SAP_INFOCUBE_INDEXES_REPAIR. this steps and all i followed but its not working fine.
The problem is Index construction for InfoCube went wrong due to SQL Error.
Job started
Step 001 started (program RSINDEX1, variant &0000000000203, user ID )
SQL: 16.07.2010 11:56:08 user
DROP INDEX "/BIC/FTTCSCH003~02"
SQL Error: [IBM][CLI Driver][DB2] SQL0904N Unsuccessful exec
SQL-END: 16.07.2010 12:06:10 00:10:02
System error: RSDU_INFOCUBE_INDEXES_DROP/DD_DROP_INDEX /BIC/FTTCSCH003 020 DB2
Report RSINDEX1 ended with errors
Job canceled after system exception ERROR_MESSAGE
Regards,
Rangaas no one is my answering my question i am going to close this thread, admin pl delete this thread.
Thanks,
Ranga -
I have applied supportpackages in wrong order.I got error. What can I do?
I have applied supportpackages in wrong order.I got error. What can I do?
When you install the support packages, the system check the dependencies between the support packages, if does not exist problem, the process continue, if not you can not import the support package.
Describe the problem and the error message, to help you.
Regards -
"Wrong process return code" Error which using OS Command
Hi,
I want to execute a shell script in unix which calls a sed script and input to the script is an xml file. I am using OS Command tool to call the script which fails with "Wrong process return code" error. I ran the command directly on UNIX box and works fine but fails when executed through a package in ODI.
The command I am passing in OS Command window is as follows:
/test/callSed.sh emp.xml
I also tried ODIOSCommand but getting the same error. The shell script has execute privileges for all users. Is there any other property to be set up for running shell scipts through ODI?
Appreciate you response.
Thanks!Hi,
Thanks for a quick response.
I tried both the commands you sent. "sh ./test/callSed.sh emp.xml" threw Wrong process return code error and "./test/callSed.sh emp.xml" threw the following error:
java.io.IOException: Cannot run program "./test/callSed.sh": java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
at java.lang.Runtime.exec(Runtime.java:593)
at java.lang.Runtime.exec(Runtime.java:431)
at java.lang.Runtime.exec(Runtime.java:328)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.G(g.java)
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.A(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:452)
... 31 more
Regards,
Aks -
Resolution to error - Unable to update Database Statistics
OK, If there's one thing i hate most about SAP, its the dreaded installation, I am always so paranoid, as to something will definitely go wrong,
Lately i realized that it aint my mind , but the damn installation itself is pretty damn stupid. Why cant SAP leave the installation packaging to professionals like installshield...
Unfortunately SAP doesnt think of it as a better idea, so until then lets try to resolve as many errors as possible thru these forums..
Here's one error resolution ,i am pretty sure, many are checking for..
Use the following procedure to resolve error
<b>Warning - "loading of sql client library oci.dll failed"
Error - Unable to update Database Statistics, Check BRCONNECT.log</b>
The problem seems to be with the SAP Patch Collection InstallMaster disc Material No.(<b>51032143_13</b>).
To resolve the problem, here's what needs to be done,
1)Install DB Instance as usual.Then after the installation errors out due to loading of sql
client library oci.dll ..
2)I unsar the downloaded DBATOOLS.sar (Thanks for the Link Andreaz!!!)
log into sapnet (eg. service.sap.com) with your user-id/pwd:
-> downloads -> support packages and patches -> entry by application group -> additional
components -> sap kernel -> now chose either 32 or 64 bit; either unicode or non-unicode ->
sap kernel 6.40 -> windows server -> oracle -> download the package DBATOOLS Package for
Oracle 9.2.x ... brconnect is part of that package...
3)Copy the files in the Unsar'd package, as follows
overwrite br*.exe to S:\usr\sap\R31\SYS\exe\run
overwrite initSID.sap to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
overwrite libsbt.dll to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
overwrite sapdba_role.sql to S:\usr\sap\R31\SYS\exe\run &
S:\usr\sap\R31\SYS\exe\nuc\NTI386
4) Retry the installation again & Guess what!! it works....
Warning-: I initially tried a shortcut by replacing DBATOOLS.sar on the installmaster disc, rather than following above steps, but that doesnt seem to work, the installation fails as as soon as Tablespace creation starts. So the shortcut aint a good one..Well, it looks like you resolved your problem yourself.
you can send feedback to SAP directly instead of posting this here in a forum. -
[SOLVED] Xorg resolution problems GTS 250 Nvidia
I have been using ubuntu for the last 3 days and i have no option to use anything but that because it is the only distro that accepts my t.v. resolution. i want to use arch as i have read alot about it but if i cannot get my resoution to work i cannot.
I have tried to use my xorg,conf file from ubuntu but with no luck. I don't know where to turn so i thought i would try my luck here. I have a Nvidia GTS 250 Graphics card and a Hitachi 42pd5200 plasma tv.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "Monitor"
# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1360x768_60_0 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH x86_64
Current Operating System: Linux chakra 2.6.31-ARCH #1 SMP PREEMPT Sat Nov 14 17:35:20 CET 2009 x86_64
Kernel command line: initrd=chakra.img quiet lang=engb nonfree=yes xdriver=no BOOT_IMAGE=vmlinuz
Build Date: 08 November 2009 04:08:18PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 6 17:52:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7c1a00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:4:0:0) 10de:0615:0000:0000 nVidia Corporation G92 [GeForce GTS 250] rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 04@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1360x768_60_0 +0+0"
(**) Apr 06 17:52:57 NVIDIA(0): Enabling RENDER acceleration
(II) Apr 06 17:52:57 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Apr 06 17:52:57 NVIDIA(0): enabled.
(WW) Apr 06 17:52:58 NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
(II) Apr 06 17:52:58 NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:4:0:0 (GPU-0)
(--) Apr 06 17:52:58 NVIDIA(0): Memory: 1048576 kBytes
(--) Apr 06 17:52:58 NVIDIA(0): VideoBIOS: 62.92.9a.00.00
(II) Apr 06 17:52:58 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Apr 06 17:52:58 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Apr 06 17:52:58 NVIDIA(0): Connected display device(s) on GeForce GTS 250 at PCI:4:0:0:
(--) Apr 06 17:52:58 NVIDIA(0): CRT-1
(--) Apr 06 17:52:58 NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
(II) Apr 06 17:52:58 NVIDIA(0): Assigned Display Device: CRT-1
(WW) Apr 06 17:52:58 NVIDIA(0): No valid modes for "1360x768_60_0+0+0"; removing.
(WW) Apr 06 17:52:58 NVIDIA(0):
(WW) Apr 06 17:52:58 NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) Apr 06 17:52:58 NVIDIA(0): "nvidia-auto-select".
(WW) Apr 06 17:52:58 NVIDIA(0):
(II) Apr 06 17:52:58 NVIDIA(0): Validated modes:
(II) Apr 06 17:52:58 NVIDIA(0): "nvidia-auto-select"
(II) Apr 06 17:52:58 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) Apr 06 17:52:58 NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
(WW) Apr 06 17:52:58 NVIDIA(0): from CRT-1's EDID.
(==) Apr 06 17:52:58 NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) Apr 06 17:52:58 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Apr 06 17:52:58 NVIDIA(0): Initialized GPU GART.
(II) Apr 06 17:52:58 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Apr 06 17:52:58 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Apr 06 17:52:58 NVIDIA(0): configuration option may not be set correctly. When the
(II) Apr 06 17:52:58 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Apr 06 17:52:58 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Apr 06 17:52:58 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Apr 06 17:52:58 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Apr 06 17:52:58 NVIDIA(0): Config Options in the README.
(II) Apr 06 17:52:58 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Apr 06 17:52:58 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Apr 06 17:52:58 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 12 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(WW) Logitech USB Receiver: ignoring absolute axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Going into nvidia-settings only displays 4:3 resolutions as options.
I have widened the horiz and vert refresh rates and it gives me a broader spectum of resolutions but they are all still 4:3. i have now reverted back to the default xorg file (the one i have provided) the log is also for the same xorg.conf.
I have also tried to add lines to the xorg.conf to ignore EDID as mentioned in the xorg wiki page
Thank you to anyone that takes there time to try and help me
Last edited by davetrotteruk (2010-04-09 08:50:11)I have a LCD with bad EDID and had to use the ignore EDID stuff from the wiki, too. Then it wouldn't give me all the resolutions I wanted. After increasing the verbosity that nvidia logged in the xorg log, I saw that because it was not pulling resolutions from the EDID, it was falling back to some lists of modes that nvidia had and xorg had, but this was not sufficient for what I wanted.
Sorta like how your log says "No valid modes for "1360x768_60_0+0+0"; removing" - you may tell it to try to use that resolution, but it doesn't have the modeline to do it.
So what I did was to give it the modelines I wanted and I think this will work for you too. Use an online modeline generator for you to get modelines to put into your xorg.conf. So you need to give xorg a modeline named "1360x768_60_0" for it to use.
modeline generator:
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl -
I know, this is a common problem, but after hours of googling and browsing Wiki and Forums I haven't fixed it. So...
I'm running the latest Arch + KDE on my new laptop, which has AMD graphics card and the display native resolution is 1366x768. But the system can't recognize it, so it runs at "default" configuration (1024*768) and I am not able to change it. It is a bit annoying, but I think I have tried almost everything. I have the open source ATI drivers installed. I have also MODULES="radeon" setting in /etc/mkinitcpio.conf.
First thing I tried was adding the resolution using xrandr. I did the --addmode and --newmode, but --output gave me this error : xrandr: Configure crtc 0 failed and after reboot, the added resolution disappeared from xrandr list, leaving "1024x768" as the only option.
I think I have some problems with the drivers than. What should I do to get them working properly ? Or is there any interference with VESA ? Even with the MODULES="radeon" setting ? Also, when I plug in an external 24" (1920x1080) monitor, still recognized just as "default" with 1024x768. I'm stuck. Any help appreciated. Thank you.
P.S. Sorry for my bad English.OK, installed succesfully. Now at least I get an output of lsmod | grep fglrx.
fglrx 5083345 0
amd_iommu_v2 7368 1 fglrx
button 4663 1 fglrx
I have created xorg.conf with "aticonfig --initial" and rebooted. However, black screen appeared. I have switched to tty and here is the Xorg.0.log : https://gist.github.com/4521646
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found - // this one looks suspicious -_-
...and this followed :
(WW) fglrx(0): Kernel Module version does *not* match driver.
[ 4.124] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[ 4.124] (EE)
[ 4.124] (EE) Backtrace:
[ 4.127] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x58a426]
[ 4.127] (EE) 1: /usr/bin/X (0x400000+0x18e279) [0x58e279]
[ 4.127] (EE) 2: /usr/lib/libpthread.so.0 (0x7f40ce2b2000+0xf1e0) [0x7f40ce2c11e0]
[ 4.127] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDrmFreeSurfaces+0x42) [0x7f40cb72a022]
[ 4.127] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriCloseScreen+0x14d) [0x7f40cb6f49ed]
[ 4.127] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriScreenInit+0x8b8) [0x7f40cb6f40a8]
[ 4.127] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxScreenInit+0xaf9) [0x7f40cb6ee3a9]
[ 4.128] (EE) 7: /usr/bin/X (AddScreen+0x85) [0x4380f5]
[ 4.128] (EE) 8: /usr/bin/X (InitOutput+0x3f3) [0x4798a3]
[ 4.128] (EE) 9: /usr/bin/X (0x400000+0x26786) [0x426786]
[ 4.128] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f40ccf36a15]
[ 4.128] (EE) 11: /usr/bin/X (0x400000+0x26cad) [0x426cad]
[ 4.128] (EE)
[ 4.128] (EE) Segmentation fault at address 0x888
[ 4.128]
Fatal server error:
[ 4.128] Caught signal 11 (Segmentation fault). Server aborting
Well, googling continues... -
Xorg: Fatal server error, no screens found
Hi, I just installed Arch Linux 2010 fresh. And after my installation completed, I installed Xorg using pacman -Syu xorg-server and pacman -Syu xorg-xinit.
But when I run startx it gives me a fatal error that goes something like...
Fatal server error: no screens found
xinit: giving up
xinit: unable to connect to X Server: connection refused
xinit: server error
Take a look at this screenshot, to get the full picture..
http://www.bildites.lv/images/wieanqq9te86gbi8x246.png
What's wrong? what do i need to do to be able to run X?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --hokasch wrote:You are installing in Virtualbox - did you set up Guest additions etc as described here? Some more random ideas - If you manually created xorg.conf files, try without them, have a look at the vboxclient thing and don't use root account for startx.
Yes, I installed the Guest additions. I don't have xorg conf file. how do i look at vboxclient? -
Unable to access OWA or ECP. - "Something went wrong" or "500 unexpected error"
Our environment consist of 3 client access servers with 8 mailbox servers. I recently installed windows updates on all of the servers. Now when a user tries to access OWA it fails and says "Something went wrong" when I try to access
ECP I receive "500 unexpected error"
I have tried building a new CAS and mailbox servers with the default settings but it still fails. I did not install the latest Windows updates on the new servers. I tried creating new databases with new users and it also fails.
There are also these ASP.NET 4.0.30319.0 warnings showing in the application log:
Log Name: Application
Source: ASP.NET 4.0.30319.0
Date: 8/30/2013 11:02:13 AM
Event ID: 1309
Task Category: Web Event
Level: Warning
Keywords: Classic
User: N/A
Computer: FacultyEmail01.corjesu.org
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 8/30/2013 11:02:13 AM
Event time (UTC): 8/30/2013 4:02:13 PM
Event ID: 1088bfe111264e01b536f66f2591c15a
Event sequence: 48245
Event occurrence: 1597
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/owa-1-130223042171473642
Trust level: Full
Application Virtual Path: /owa
Application Path: C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\
Machine name: FACULTYEMAIL01
Process information:
Process ID: 13764
Process name: w3wp.exe
Account name: NT AUTHORITY\SYSTEM
Exception information:
Exception type: NullReferenceException
Exception message: Object reference not set to an instance of an object.
at Microsoft.Exchange.Clients.Common.Canary15.Init(Byte[] userContextIdBinary, Byte[] timeStampBinary, String logonUniqueKey, Byte[] hashBinary, String logData)
at Microsoft.Exchange.Clients.Common.Canary15..ctor(String logonUniqueKey)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpCookie(HttpCookie cookie, String logonUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpContext(HttpContext httpContext, String logOnUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.InternalOnPostAuthorizeRequest(Object sender)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.OnPostAuthorizeRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Request information:
Request URL: https://localhost:444/owa/logoff.owa
Request path: /owa/logoff.owa
User host address: 127.0.0.1
User: CORJESU\SM_cab26786a5604c759
Is authenticated: True
Authentication Type: Kerberos
Thread account name: NT AUTHORITY\SYSTEM
Thread information:
Thread ID: 12
Thread account name: NT AUTHORITY\SYSTEM
Is impersonating: False
Stack trace: at Microsoft.Exchange.Clients.Common.Canary15.Init(Byte[] userContextIdBinary, Byte[] timeStampBinary, String logonUniqueKey, Byte[] hashBinary, String logData)
at Microsoft.Exchange.Clients.Common.Canary15..ctor(String logonUniqueKey)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpCookie(HttpCookie cookie, String logonUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpContext(HttpContext httpContext, String logOnUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.InternalOnPostAuthorizeRequest(Object sender)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.OnPostAuthorizeRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 4.0.30319.0" />
<EventID Qualifiers="32768">1309</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-30T16:02:13.000000000Z" />
<EventRecordID>721791</EventRecordID>
<Channel>Application</Channel>
<Computer>FacultyEmail01.corjesu.org</Computer>
<Security />
</System>
<EventData>
<Data>3005</Data>
<Data>An unhandled exception has occurred.</Data>
<Data>8/30/2013 11:02:13 AM</Data>
<Data>8/30/2013 4:02:13 PM</Data>
<Data>1088bfe111264e01b536f66f2591c15a</Data>
<Data>48245</Data>
<Data>1597</Data>
<Data>0</Data>
<Data>/LM/W3SVC/2/ROOT/owa-1-130223042171473642</Data>
<Data>Full</Data>
<Data>/owa</Data>
<Data>C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\</Data>
<Data>FACULTYEMAIL01</Data>
<Data>
</Data>
<Data>13764</Data>
<Data>w3wp.exe</Data>
<Data>NT AUTHORITY\SYSTEM</Data>
<Data>NullReferenceException</Data>
<Data>Object reference not set to an instance of an object.
at Microsoft.Exchange.Clients.Common.Canary15.Init(Byte[] userContextIdBinary, Byte[] timeStampBinary, String logonUniqueKey, Byte[] hashBinary, String logData)
at Microsoft.Exchange.Clients.Common.Canary15..ctor(String logonUniqueKey)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpCookie(HttpCookie cookie, String logonUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpContext(HttpContext httpContext, String logOnUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.InternalOnPostAuthorizeRequest(Object sender)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.OnPostAuthorizeRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
</Data>
<Data>https://localhost:444/owa/logoff.owa</Data>
<Data>/owa/logoff.owa</Data>
<Data>127.0.0.1</Data>
<Data>CORJESU\SM_cab26786a5604c759</Data>
<Data>True</Data>
<Data>Kerberos</Data>
<Data>NT AUTHORITY\SYSTEM</Data>
<Data>12</Data>
<Data>NT AUTHORITY\SYSTEM</Data>
<Data>False</Data>
<Data> at Microsoft.Exchange.Clients.Common.Canary15.Init(Byte[] userContextIdBinary, Byte[] timeStampBinary, String logonUniqueKey, Byte[] hashBinary, String logData)
at Microsoft.Exchange.Clients.Common.Canary15..ctor(String logonUniqueKey)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpCookie(HttpCookie cookie, String logonUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Common.Canary15Cookie.TryCreateFromHttpContext(HttpContext httpContext, String logOnUniqueKey, Canary15Profile profile)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.InternalOnPostAuthorizeRequest(Object sender)
at Microsoft.Exchange.Clients.Owa2.Server.Core.OwaRequestHandler.OnPostAuthorizeRequest(Object sender, EventArgs e)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
</Data>
</EventData>
</Event>I opened a case with Microsoft. After 3 days and over 15 hours on the phone they were able to resolve the problem. They had to use ADSI edit to remove the canary data for the domain.
I tried rebuilding the virtual directories, building a new CAS server, a new mailbox server and a new server with both roles installed. I created a new database and new users in that database and used the new CAS server but the problem continued which
led us to believe it was something being obtained from Active Directory. We finally figured out the problem was in the properties of an object in ADSI.
You have to open the ADSI editor on the primary domain controller (start-->administrative tools-->ADSI edit), go to CN=Services --> CN=Microsoft Exchange --> CN=<Your Site Name> Right click CN=Client Access and click properties.
Scroll down to msExchCanaryData0. You have to click edit and copy the data from Data0, Data1 and Data2 (you may have more or less) to a notepad file. Then erase the data from those settings. Now log onto the CAS server and open IIS management.
Go to application pools and right click MSExchangeOWAAppPool and click Recycling. Then restart all of the mailbox servers.
It's a great idea to take a system state backup before performing these steps as editing ADSI data is risky. -
How do I modify an Illy .eps to get rid of IDs 'effective resolution' preflight error?
Hi there
We are running CS5.5 here, and have had an Illustrator .eps file supplied to us which is causing problems in InDesign, bring up the 'Effective resolution' error in the custom preflight (which we have set to 300pdi min.), and ID reports an effective resolution of 250dpi. The image is not scaled in ID – it's 100%. We get this a lot, and would like to totally stamp this out and find out what is going on here.
The Illustrator file has no raster images in it, either embedded or linked. There are raster effects like drop shadow and inner glow.
I opened the illy eps, selected all, and went to Effect>Document Raster Settings, and changed the resolution from 'High (300ppi)' to 'Other', and set it at 1200ppi. I also went to Edit>Transparency Flattener Presets, and made a copy of the 'High' setting, and changed the 'Gradient and Mesh' resolution to also 1200dpi. Complete overkill. I saved the .eps (and tried 'save as' .eps, ensuring again that the correct transparency setting was used).
However, the resulting images STILL displayed the pre-flight error in inDesign.
What am I missing? HELP!!Just did a test on this, and the Illustrator (for some reason) changed this in the .eps
To this in the .ai.
Can't use that. Gotta go with .eps.
I tried selecting all, and going to 'Object>Flatten transparency', but it just made the .eps look like the .ai. And the problem still persisted anyway...
Is it safe just to ignore this ID warning? is it going to bounce back from the printers if I dont resolve it? -
Wrong image resolution for TIF file
Under OSX 10.6.2, the image resolution using Preview application is wrong for FAX MultiPages TIFF files.
If I open up a file with this resolution:
Image size: 1728 x 1081 pixels
Image DPI: 204 x 98 pixels/inch
Color Model: Gray.
The image always show up all squeezed vertically which tells me the Preview application is not processing the DPI properly. When using the size menu from tools, it assumes the resolution is the same for vertical and horizontal which is wrong.
I'm unable to use the Preview application to read FAX TIFF files with the standard FAX resolution.
How do I open up a trouble ticket with Apple developers to fix this issue? I believe it's a software design issue assuming that all TIFF files use the same resolution for both horizontal and vertical DPI. The Preview application should be able to handle different DPI for horizontal and vertical resolution.
We're a small business and we are running the whole office with Mac Minis and iMac with a Mac Mini Server of course. We love it, but we have this annoying bug which I don't have any way to fix it.
Thank you,
Stephan Monette
Unlimitel Inc.Here's a sample of the tif file from our fax machine you can download:
http://www.hmnet.net/warp2/fax-standard.tif
Download the file on your desktop and try opening it. You will see the square at the bottom will look like a rectangle. With the right resolution, it should look like a square, not a rectangle.
If I open the file with Windows picture and fax viewer, the resolution is fine and the square looks like a square. But the same file on Windows with Quicktime fails to open and it complains about a corrupted file.
On my MAC, the file opens with Preview, but the resolution is wrong.
Maybe the FAX server is not formatting the TIFF file properly, but we can't fix that since there's no more support for it. But the Windows app is able to open it up with the right resolution. So maybe it's just some code change to do in the Preview app.
Thanks,
Stephan Monette
Unlimitel Inc. -
Wrong type of file error message PSE 7
Error message in PSE & when I try to open images I saved. Wrong type of file, cannot be opened. Tried to remove the read-only in properties but still cannot open .jpg images. Can anyone help? Photo attached.
I do not see any attachment.
-garry
Maybe you are looking for
-
Dear All , How can i handle wealth tax in sap . as per my knowladge direct tax calculation except WHT can not be done automatically in SAP FICO. Please guide me
-
Problem with BAPI CALL in BPM(with in a loop)
Hi All, I have a scenario where i invoke a BAPI by name BAPI_IPAK_START which pushes some data from Delta Queue to the Info Object.After invocation, the BAPI returns a request ID.In order to get the status of the request which is created by the previ
-
BPM Exception handling for RFC errors
Hi all I have to handle the exception which would be like below: com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.
-
Root Bridge vs. Non-Root Bridge
Hi, I want to understand the Root Bridge vs. the Non-Root Bidge when using Autonomous 1131 AP's on the same /24 network. Does that command matter in Autonomous? I have many devices working without issues on the same /24 network and all have the Root
-
Core 2 Duo Firewire will not power up Fireface 400 audio device
I recently replaced my MacBook Pro Core Duo 15" by a MacBook Pro Core 2 Duo 15". The Core 2 Duo does not power up nor recognize my FireFace 400 ( www.rme-audio.com/english/firewire/ff400.htm ) wether plugged in the firewire 400 or 800. I went to a Ma