WRT300N Not broadcasting on any channel

I've had my WRT300N v1 (firmware version 1.03.6) for about a month now (just long enough to not be able to return it to Best Buy). I got it to replace a Linksys wireless-B router that I had had for many years, but which stopped working altogether. Before dying, I had no problem getting strong signal anywhere in my apartment or even outside through multiple walls.
With the new router, my laptop (which has a wireless-b card built in and is running Win XP Pro) is currently sitting 3 feet from the router and is not detecting the network. I've tried setting the network mode to Mixed, BG-Mixed, and to B Only. I've tried all 11 channels. I've tried changing the beacon interval, fragmentation threshold, and RTS threshold as recommended elsewhere. I've tried turning off security (although when I first set it up, I didn't turn on the security and within a day there were two people leaching off of my connection).
If I power down the router and then power it back up, the computer detects the network for a few minutes before it goes away again. In addition, I've got a wireless appliance on my stereo (SlimServer Squeezebox) which has built in wireless-g which exhibits the same sort of behavior. When I power cycle, I can get 75% signal (less than what I had with my old router), but as soon as I connect, it loses the signal. The signal meter on the Squeezebox currently reads 0%.
The wired portion of the router is working just fine, and I have no problem connecting either my desktop or my laptop with an ethernet cable.
Is there anything else I can try, or should I just contact customer support to arrange for a return or refund?

Looks like the only carriers in the US will be Direct TV and Dish Network.
You could watch it on-line via www.willow.tv but it looks like a subscription to that will run about $130
====================================================================================
Error exists between keyboard and chair.

Similar Messages

SAP audio language not working for *any* channels. Useless tech already came out!

Just got the FIOS service this Friday.
I'm very happy with the internet. Very fast!
The TV, I'm not so happy about.
Having come from AT&T U-Verse, and Time Warner Cable before that, I've gotten used to having the HBO channel lineup (or any premium channels like Showtime/Cinemax/etc) and being able to easily switch between English and Spanish audio. So far, between 6 calls to customer service (each one of them telling me it's possible), and one extremely clueless tech that just left my home after only 5 minutes, I've not been able to do this.
I can SEE the option for SAP! I KNOW HBO offers Spanish audio for its' non-HBO Latino channels. I also know that not all movies have Spanish audio, but the majority of new HBO movies do.
A guy on the phone on Saturday had me convinced that to watch HBO channels with Spanish audio, I had to purchase your Spanish package that comes with extra Spanish channels. I thought this was ridiculous -- since I've already got a PREMIUM package, why in the world would I need to get another package to listen to that premium one in Spanish?! Anyways, I got the package and still no Spanish HBO.
The tech that came and left in 5 minutes changed the channel to HBO Latino and said, "Here, it's working". I pointed out that HBO Latino is not what I meant - none of the other HBO channels have Spanish, althought we could see they said SAP.
What gives, Verizon? This, coupled with the fact that I can't set my main DVR to record a show we're watching on an HD receiver in another room without physically going to the DVR itself (or using a cellphone app!) and that apparently I can only record 1 show on the DVR at a time, has me pining for AT&T... which I never thought would happen.
Hell, even Time Warner Cable's HBO lineup has Spanish.
Sounds to me like your all-fiber network isn't up to snuff on some very basic things.

skohly wrote:
Chill man
On your remote push the option button. Then click on audio language and change to spanish. You will be all set
We've been through that appx. 50 times with tech support - not working. Tech guy that came out today said Verizon doesn't offer SAP ... so I don't know what to think now.

I could not configure a DAQ assitant for any channel

In the wizard after selecting the voltage input i am not able proceed forward i.e i could not find any channels to select in Mychannelsbox,so can any one tell me what should i do and what all the software i need to install to use DAQ.i have complete labview development suite version 7.0 ,i hope to get reply as early as possible,bharat

What version of NI-DAQ are you running? What DAQ card do you have? If you do not have a DAQ card installed, you will be able to start the DAQ Assistant but not complete it since you have no available channels (no card installed).
If you do have a DAQ card installed, is it functioning in MAX? Can you run a test panel on it?

MiFi 4510L not broadcasting an SSID

So I purchased a 4510 to replace my 2200. I got it all activated last night and it worked flawlessly on my Mac, ipad, iphone, etc. I bring it in to work today. Turn it on and can't find the SSID with either my two laptops(one windows, one mac), my iphone, or my ipad.
I decided to turn it off , turn it back on. Again no SSID. I DID NOT change it to NOT broadcast. I tried manually entering the SSID and password into my mac. Could not find that network.
I then decided to reset the sim card. No change.
I also did 3 hard resets and still SSID or network for me to access? What am I missing here? Am I making a mistake or is something up with the unit?
The antenna has full bars. The light is bright green. The battery is fully charged.
Any help is greatly appreciated.

I'm having the exact issue you describe, with multiple 4510Ls. I use one personally, and have also been setting up two other 4510s for my customers over the past couple of days. In my office, I see several other WiFi networks, but the MiFi 4510s do not show up. Actually, if I reset the 4510 several times, it MIGHT show up as a WiFi network for a brief period of time.
I took two of the 4510s downstairs, to a less WiFi congested part of the building, and started one up. I immediately saw the Verizon SSID show up on my iPad, iPhone, and Blackberry. I ensured that all three devices could join the network and surf the 'net. Then, I shut down that MiFi and started up the other one. Same result: in this location, where there aren't too many WiFi networks showing up, the MiFis work fine.
However, I took them back upstairs, and once again ran into the issue where none of my devices would see the Verizon SSIDs. My client devices are all within 5-10 feet of the MiFi, as they were when I was downstairs and this all worked.
I'm assuming that one of these may be true:
1) The MiFi's signal is so very weak, that it can't compete with the stronger networks in use in and around my office. (Less Likely)
2) When the MiFi boots up, it searches for an empty WiFi channel to broadcast. When it can't find one that it likes, it simply does not broadcast an SSID, rendering the MiFi completely inaccessible. (More likely)
Whatever is going on, I sure hope that Verizon can fix it. Soon. This is a huge problem for what is otherwise a good device. I've gotten 4 customers to upgrade from their MiFi 2200, and am really afraid that recommendation is going to come back to bite me.
I should also mention that I've seen these exact symptoms with the Verizon Samsung 4G Hotspot LC-11 (I might be slightly off on that model number.)

Flash installed and up to date however flash does not run on any web browser

I was catching up on watching a televsion show and watching it with no issues/no problems with flash before. I went to the website below and all of a sudden flash is not working. I did not change any settings, run any updates. I checked various browsers, flash content is not working on any of them. I can view youtube videos however just about any other site I've tried, nothing and many websites will not display correctly. I tried some of the troubleshooting suggestions in the forum however some of them I'm unable to do such as alter the flash settings, it takes me to the page but tells me I don't have Flash installed. I've tried switching user accounts on my pc as others have said flash works for them on the other account however mine is still broken. I've actually tried a system restore, still no luck.
Windows 8 (64 bit)
Flash Version 11.9.900.152
Tried web browsers IE, Firefox, Chrome - I've verified it is enabled
Active X is disabled
I've ran the 'test' to verify Flash is installed and it displays the video
I ran the debugger however I do not know how to interpret the data.
PLEASE HELP!!
Request Displayed
#1 - SiteCatalyst Image 1564 chars
Friendly Third Party Cookies
om.cbsi.com
Report Suite ID(s)
cnetcbscomsite, cbsicbsiall
Version of Code
H.25.4
Query String Beginning
1
Sent From JavaScript File?
1
Date/Time
December 8, 2013 at 10:27 PM
fid=30F75FA127AB1EDA-2ECCBA4ED7B2A80F
Name Space
cbsinteractive
pageName
cbscom:The Big Bang Theory - The Discovery Dissipation:The Big Bang Theory:The Big Bang Theory Video The Discovery Dissipation CBS com:p1:video:the big bang theory:comedy:primetime
Current URL
http://www.cbs.com/shows/big_bang_theory/video/
channel
primetime
prop1
cbs.com
eVar1
D=c1
prop2
us
eVar2
D=c2
prop3
responsive web|||desktop
eVar3
D=c3
prop5
cnetcbscomsite
eVar5
D=c5
eVar6
primetime|comedy|the big bang theory|video
prop7
D=g
eVar7
D=g
prop8
The Big Bang Theory Video - The Discovery Dissipation - CBS.com
eVar8
D=c8
prop9
D=User-Agent
prop10
video
eVar10
D=c10
prop11
primetime:video
eVar11
D=c11
prop12
6711
eVar12
D=c12
prop13
19650
eVar13
D=c13
prop20
The Big Bang Theory Video The Discovery Dissipation CBS com
eVar20
D=c20
prop21
D=c20
eVar21
D=c20
prop22
D=c10
eVar22
D=c10
prop30
cbscom:UqU4QwoZASUAAGHo9yEAAAA5
eVar30
D=c30
eVar49
ishd
eVar54
Less than 1 day
prop60
not set
eVar60
D=c60
prop61
comedy
eVar61
D=c61
prop62
D=c60
eVar62
D=c60
prop63
cbscom:10|The Big Bang Theory
eVar63
D=c63
prop64
cbscom:1933E590-B255-5B32-E778-BF122477716C|The Big Bang Theory - The Discovery Dissipation
eVar64
D=c64
prop65
7
eVar65
D=c65
prop66
D=c65
eVar66
D=c65
hier1
cbscom:primetime|comedy|the big bang theory|video
Screen Resolution
1600x900
Color Depth
24
JavaScript Version
1.6
JavaScript Enabled
Y
Cookies Supported
Y
Browser Width
1600
Browser Height
814
Connection Type
lan
Home Page?
N
Query String End
1

Hi there
Sorry, but you aren't in the right place for getting help with this. Try clicking the link below and choose a forum dedicated to Adobe Flash.
Click here
Best of luck to you in resolving your issue! Rick

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

HP Mediasmart DVD on a6750t will not output 5.1 channel data via SPDIF or HDMI

So I got a new customized HP desktop on Friday. Started to play with it on Saturday. I called Sunday morning to request an RMA number and return shipping label. Here is my saga:
Started HP issue calls at 3:47am FEB 15th 2009
Gion (per rep spelling) stated return will be handled through warrantee/support department). He stated HP does not allow them to release a badge number. Ticket# xxxxxx3374.
(Transferred to warrantee/support department)
(The line was full of static- asked for the 800 to call back. Person said he didn’t have the number I called in on. Had to log on to www.hp.com. Found the number to call was 1 (800) 474-6836. I called this number.)
Satya (per rep spelling) answered the line. I informed rep that I am not receiving any 5.1 output from the Blu-ray disk software that was provided by HP (HP Mediasmart DVD). Advised him that all MS products, DVD's, and HD devices were sending 5.1 channel output to my Yamaha receiver. [DVD’s are the important part. As the same drive is used for BOTH DVD and Blu-Ray, it is my opinion that the hardware is working fine.] I reiterated many times that the only thing not sending 5.1 channel data was the HP MediaSmart DVD software player for Blu-Ray disks.
Satya ran various tests and wanted to “call back tomorrow with a solution“. He seemed to think that perhaps there was a problem with hardware and possibly I had not received something in my order.
I clearly started I wanted a RMA number and I wanted to return the product. Satya refused saying he had to "research" the problem before he could issue the RMA number and return the product. He said he would call me between 2pm and 5pm tomorrow (MST) (I informed him it was currently 4:49 am at my location.)
The problem is not with the hardware. All Microsoft software products that offer 5.1 channel support are sending via SPDIF (optic cable) 5.1 channel data. Again, all DVDs and other 5.1 devices (HD PVR) are sending (via SPDIF) 5.1 channel data to my Yamaha receiver. The only thing not outputting in 5.1 is the Blu-ray disk software player (HP Mediasmart DVD). DVD’s are ran using the Blu-ray drive (only one on the system) and are sending 5.1 channel data with no issues.
Ended HP issue calls 4:52am FEB 15th 2009
So, any other suggestions? I have tried various things like HDMI-Passthrough, HDMI-PCM, SPDIF, and 6 speaker output on the HP MediaSmart DVD Blu-ray software player application to no avail.
This question was solved.
View Solution.

FEB 16th 2009 1:15 am
Decided to try some trial Blu-ray programs to see if this issue can indeed be resolved with a different software package.
Corel’s WinDVD9 would not play a Blu-ray disk. I received no errors. The program loaded the disk, after about 10 seconds stopped and went back to the main screen.
Cyberlink PowerDVD had a trial limitation that does not allow Blu-ray disk playback.
ArcSoft TotalMedia Theater (TMT) works flawlessly. Outputs in 5.1 surround with no issues, therefore my assumption that it’s a software issue is correct.
Due to the problem being software related, I will call HP to see if there is a way they can send me a different Blu-ray software player. I like the system and do not really want to ship this back to HP. There is a sale tomarrow and I might even buy another system for my mother if HP will work this out.
HP call start at 2:06 am FEB 16th 2009
Called 1 (800) 474-6836. Satya answered the line. He asked if his supervisor had called me. I stated no, I had only received his call at 7:47pm and I had placed a call to Bridgette at 8:37 pm for a RMA number and shipping label.
I advised him I was willing to try and work with HP now that I found it was indeed a software issue. I asked him if there was a possibility of getting a different software player that would work with my setup. I advised that on my own I found that ArcSoft TotalMedia Theater (TMT) trial version works (based on me installing a trial version). Its my understanding that HP provides many software titles from ArcSoft including a MediaConverter I also purchased for the desktop.
He placed me on hold to find out.
He said HP doesn’t carry or support ArcSoft TotalMedia Theater. He said he would have a supervisor call me back within 24 hours with a solution. I advised him to stop the RMA. He stated an RMA had not been issued yet. I gave him the RMA number I had and advised I had received a shipping label via email from Bridgette per my earlier call. He placed me back on hold to check.
He said he cancelled the RMA and would have a supervisor call me back between 2pm - 5pm (within 24 hours).
Call ended at 2:34 pm FEB 16th 2009
I am guessing that HP support is not enpowered to solve a problem like mine. I would have been willing to work out something with HP but its is seeming more and more that HP really doesnt want my business. The issue here is software limitation PLAIN AND SIMPLE. I paid (in part) for a Blu-ray player that would play Blu-ray disks and output sound in 5.1. The TRIAL version of ArcSoft TotalMedia Theater works fine. Therefore the hardware is fine.
Without a different software player shipped to me OR me buying the ArcSoft TotalMedia Theater software for 80 dollars, I am forced to listen to Blu-ray disks in 2 channels. I would like to work with HP but if HP will not work with me then I have no choice than to return the product.

All of a sudden, I can no longer add any plugins to any channel strips? And when I click on an existing plugin to edit, it disappears off the channel strip?

I am running Logic express 9 on a 2008 Macbook, (non pro). Anyhow, logic has always seemed to work great for me. However, last week I opened up one of many existing projects, (I'm in sample editor). When I went to add a new plugin to one of the channel strips it would not allow me to. Also, if I click on any plugin that already exists on the channel strip it dissapears? The strange thing that also happens weather I click to add a new plugin or click on an already existing plugin, is both the "repeat section" and "crop", buttons from the above menu (in sample editor), the actual buttons become a faded image,(as far as the actual font and images of the buttons). As soon as I am done clicking to add a plugin on the channel strip, both buttons from the menu go back to looking normal like all of the other choices from that menu? I really don't get it? All I want to do is to be able to add plugins as well as edit or change plugins again. Any thoughts as to why I can no longer add any new plugins to any channel strips? And why any existing plugins disappear from the channel strip when I click on it? Why the "repeat section", and "Crop", buttons from the menu above fade in and out when I try clicking on the channel strip is very strange? I don't mind that I just want to be able to add or edit plugins again. I did do some document cleaning up last week as my memory was getting low. I then emptied out my trash bin. I'm hoping I didn't accidentally delete some kind of Logic component? Why can't I add or edit plugins anymore? Anyone ever run across this?
Thanks,
Mike.

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

[39008] Logical dimension table X has a source that does not join to any...

Hi Gurus,
I have warning:
"[39008] Logical dimension table X has a source that does not join to any fact source"
WHERE X:
PROMOTIONS,PRODUCTS, CUSTOMERS, CHANNELS
but all logical table are mapped to fact.
Eveb I can create reports for them
(The metadata was derived from OWB 11gR2, SALES_EE)
Thanks
Laszlo
Thanks for Your earlier answer as well!

Hi,
Did you create hierrarchy on that dimension.?
Add contel level in fact source to hierarrchy detail for the fact that joins the dimension.
Look at this for best practice...http://gerardnico.com/wiki/dat/obiee/hierarchy?s
Please do close your previous thread assigning points by clicking helpful or correct to the replies
Import XML file into rpd file
Thanks,
Srikanth

Error: BPE_ADAPTER Message not used in any process

Please help me fix this error.
My scenario is i have a bpm process for merging three files.
and i configured in this way..
merge the three files into one and send into SAP
i have three communication channels (file adapter) for three files
one communication channel xi adapter for a proxy into sap.
using these files as input to BPM process
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
thanks
jp

JP,
Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
Best regards,
raj.

Commit events are not broadcast because no JMS Transport is available.

Just set up a new WebLogic 10.3.2 domain and I am seeing this while starting the Admin Server:
<Mar 1, 2010 6:37:03 PM CST> <Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>
anyone have any idea what this is and what's causing it?

Hi,
I followed the instructions given under " Configure the RDBMS security store " ( Step 6 ) and restarted my Server. :-
+6. In the section labeled Server Synchronization Configuration, specify the appropriate settings for JNDI and JMS so that the RDBMS security store can cache database information in memory correctly. If the RDBMS is running in more than one JVM -- for example, the domain has multiple servers, or other Oracle products are sharing the same RDBMS store with the new domain -- these caches must be synchronized to ensure the integrity of the security data.+
To configure server synchronization:
+1. Specify a JNDI user name and password. This can be any valid user in the security realm who has access to JNDI.+
+2. Create a JMS topic. You may reuse an existing one, if desired. For information, see Configure topics.+
Caution: Failure to configure JMS notifications in a multiserver domain in which the RDBMS security store is configured may result in a security vulnerability.
+7. Click Save.+
+8. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.+
Not all changes take effect immediately—some require a restart (see Use the Change Center).
However, I still see the same error :-
*+<Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>+*
Am I missing something ?
Thanks,
Sandeep Seshan

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

IDOC adapter is not shown in communication channel

hi gurus,
at present i am using PI and in the communication channel list (adapters types) no idoc adapter is displayed ,can anyone help me to solve this problem.
and also when i create any scenario related to idoc those messages where not displayed in communication channel.

Hi Allen,
U r checking for an IDoc channels in Communication channel monitoring.IDoc adapter is reside in ABAP stack.So that u cant see the Idoc communication channels from monitoring of CC's. If Idoc messages is at sender side no need of CC.
If you want to view the source and target messages of Idoc's u can see those from SXMB_MONI.Choose u r processed message,Dbl click,For Idoc as sender u can view the message from payloads of Inbound message,For Idos as Receiver u can view the message from Payloads of Request message Mapping.
Hope it will helps..
Cheers
Veera
>>>Reward points,if it is needful

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

All SSIDs are not broadcasting...

I have a serious issue with my Cisco 4404 WLC. In from WLC, only some SSIDs are broadcasting the others are not broadcasting.... If I make a new WLAN and select it as broadcasting, but its not broadcasting correctly. I cannot see this in my device. What can be reason? Is there any restriction to the number of broadcasting SSIDs.

That's too many SSID's.... 3-4 is max I would go. What I would do is make sure your not using AP Groups and if you are, then make sure all the WLANS are in the ap group. WLAN ID 1-16 will be the only SSID's that are broadcasted on the AP, and WLAN 17 and up will not be and you will need to use ap groups for that. If this is all fine, then delete the ssid that is the issue and recreate it. You might have too many beacons in the air causing the clients not to see certain ones.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

WRT300N Not broadcasting on any channel

Similar Messages

Maybe you are looking for