WRT350N firmware update utility crashes

I ran
WRT350N_1_03_2_US_upgrade_utility.exe
in Windows XP SP2. I tried in two different computers with same result:
After entering password screen shows two http 404 not found messages, and  cpu goes to 100% forever.
How to fix this ?
I also tried in window Vista. In Vista utility says that it cannot connet to router or my password is invalid.
Accessing router from browser works OK in all cases.

check the download speed and the streaming video when the computer is directly connected to the modem

Similar Messages

  • Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted

    Yep.  Not sure what happened with that one. I have submitted the issue to the software team.  Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.  

    Update to my previous post: HP confirms that their Firmware Update Utility is broken, but there is another way to update the firmware on a LaserJet P2055dn using a Mac running OS X, and here it is. HP tech support walked me through this procedure and it worked for me: Getting the printer ready: ensure that the LaserJet P2055dn is connected to your computer and make it the default printer. In System Preferences / Printers and Scanners, find your HP LaserJet P2055dn, select it, Click “Open Print Queue” and on the Printer menu, choose “Make Default.” On that same menu, choose “Print Test Page” and verify that the page prints.Using your Web browser, go to the following page on the HP website and click the “Download” button. Don’t worry that the page says it’s for Windows Vista. The file you’re about to download is for your HP LaserJet printer and doesn’t care what kind of computer you use to install it. Here’s the link:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ja-143142-1#tab1
    When it finishes downloading, go to your downloads folder and find the file HP_LaserJet_P2055dn_20141201_build155964.rfu
    (note: you'll probably get a “Preparing for HP separation” message;. Just click OK)In your Applications/Utilities folder, find Terminal, and open it. In the Terminal window, type lp (space) but don’t press “return” yet. Drag and drop the above file from your finder window into the Terminal window. Then press “return”Watch the LCD display on your printer. It should go through several steps, beginning with “erasing” and finally saying “ready.”Go back to the printer’s “Print Queue” window and print another test page. If the test page prints properly, congratulations. You've done it!

  • New NF980-G65 with an AMD X6 1090T and the BIOS Update Utility Crashes?

    Last week I received my new NF980-G65 board and with it an AMD Phenom II X6 1090T (Thuban 3.2GHz Socket AM3).  After installing the board and starting it up for the first time I noticed that it reports BIOS version 1.1 and CPU unknown.  Next I downloaded the BIOS update to version 1.3 from msi, made a boot USB stick and powered up again.  System will not boot from USB.  I tried now over 20 different sticks from 256MB to 64GB and none of them worked!
    Went back to my old system and ripped its floppy drive out to install it in the new computer.  Had to go to RadioShack since I have not touched a floppy in over 10 years, but they had some on clearance.  Made me a boot disk, put the new BIOS and install utility on it, booted the system with the floppy, started the BIOS update utility and watched it crash.  When I start it by itself it gives me three screens of options and commands, but as soon as I try to use one of the commands or update the BIOS it keeps crashing.
    What do I have to do to get the BIOS on the NF980-G65 updated so it will run with my AMD X6 1090T processor?
    Thank you in advance for ANY help...
    Tyler

    Quote
    I am sorry, but I need to work with this thing since I make a living writing code, I do not play with it!  This thing and the support I am getting for it are not worth my time or money!
    What thing are you talking about?  You are experiencing the a certain symptom for which you do not know the cause.  For some strange reason and without any in-depth tests you seem to assume that the board must be the problem (ignoring all other components (for example your factory overclocked memory modules).
    Quote
    the support I am getting for it are not worth my time or money!
    What support have you tried to get that actually has to do anything with money?  Please note that this is not MSI Technical Support but a User-to-User forum, run by users (just like you) that do not get paid for donating their private time to try to help others.  Whatever your level of frustration is in regards to the money spent for your components, please do not use it to insult anyone here in this forum.
    Quote
    The result remains the same, the update utility keeps crashing...
    Are still using the same floppy drive with the same floppy disk in it?
    What is your current BIOS-Version?
    Quote
    BIOS update utility
    What version? What is the exact file name of that utility?
    Quote
    ade me a boot disk
    How/Based on what DOS Version?

  • BIOS //& Lenovo Battery Firmware Update Utility Dependency Wrapper

    Hallo zusammen,
    ich besitze folgendes Modell und benötige eure Hilfe:
    (hier noch einmal die genauen Spezifikationen:
    Turion K685(1.8GHz) 6GB RAM 250GB 7200rpm HD 13.3in 1366x768 LCD ATI Radeon HD 4225 802.11bgn wireless Bluetooth 1Gb Ethernet UltraNav 6c Li-Ion No preload)
    Ich habe folgendes Problem, das sich als eher umfangreich gestaltet; ich hoffe dennoch, dass mir jemand helfen kann & dies auch tun wird:
    Aufgrund der sehr kurze Laufzeit des Akkus (trotz guter Pflege) bin ich zur Update Utility (s. Betreff) gelangt und wollte das Update durchführen. Die Seriennummer meines Akkus habe ich selbstverständlich im README for the Battery Firmware Update dependency wrapper utilities abgeglichen und sie sind dort auch aufgeführt.
    Bei der Durchführung des Updates kommt folgende Fehlermeldung:
    Ein Update des Power Managements konnte ich durchführen, aber es scheitert an der aktuellen BIOS-Version. Laut READ ME wird als Minimum die BIOS-Version 1.18 (6ZET31WW) benötigt, ich habe Version 1.17 (85ET44WW) und auf der lenovo-Seite auch nur die Version 1.25 finden.
    Ich habe vor einiger Zeit einmal mit einem Techniker telefoniert, der alle meine Daten geprüft hat und mir einen Link zum Firmware-Update des BIOS (File mit dem Namen "6yuj11us") gegeben hat:
    Dieses wollte ich dann durchführen und es hat auch so weit funktioniert:
    Beim Klick auf "Next" kommt es dann aber sowohl beim Update des BIOS, als auch der "model number" zu folgender Fehlermeldung:
    Wenn ich dann im DRIVERS-Ordner in das erstellte Verzeichnis navigiere, finde ich WinPhlash (32 & 64), da traue ich mich aber nicht so recht weiter:
    Den Support kann ich nicht befragen, da meineGarantie abgelaufen ist und ich hoffe an dieser Stelle nun auf eure Hilfe. Hat das jemand schon einmal durchgeführt oder kann mir sagen, dass das (sogar im Falle eines BIOS-Updates) bedenkenlos ist?
    Vielen Dank schon einmal im Voraus!
    -R

    Von so einem Quatsch, den der so genannte Techniker angeraten hat, würde ich auf jedem Fall absehen. Auf der Supportseite von Lenovo ist eindeutig zu entnehmen, dass die BIOS Versionen 1.25/1.20 aus dem Jahr 2012 und die 1.15/1.17 aus dem Jahr 2013 stammen. Ich denke, dass es sich um unterschiedliche Geräte handelt und entsprechend eine bestimmte BIOS Reihe unterstützt wird.
    Im Readme steht:
    Versions 1.25 (for BIOS ID 6Zxxxxxx-based computer)
    1.20 (for BIOS ID 6Yxxxxxx-based computer)
    und
    Versions 1.15 (for Machine types: 0217 and 0250)
    1.17 (for Machine type: 0221)
    Ich denke, dass ich mit meiner Vermutung richtig liege.
    Wo du eine BIOS Version 1.18 beziehen kannst, das weiß ich nicht. Vermutlich gibt es keine neuere Version. Ich würde auch nicht krampfhaft probieren eine falsche aufzuspielen.
    Meine Frage ist, wie lange die Akku, so im Normalbetrieb reicht?

  • EFI firmware update & first crash

    I updated yesterday my Mac pro with the Efi firmware update.
    The 2 first trials to update didn't work and then I unplugged the 2 external firewire drives and my powerbook that was connected via a cross-over cabel and it finally worked.
    I immediately was aware that the computer was running much faster (starting up, loading programs, etc) and that I had more free memory available.
    The mac is running with only 1GB of ram (waiting for 2 GB more).
    Today I experienced my first total crash. The screens went half dark and I was was asked to restart with the power button. At the time I only had mail and safari running. I was away for 10 min, so I might have put the mac to sleep (don't remember).
    Have any of you out there experienced similar crashes?
    Eugene
    www.eugene-hertoghe.com
    Mac pro 2,66 Mac OS X (10.4.7) powerbook g4 12i

    Welcome to Apple Discussions!
    I don't think installing firmware updates over the network works. Migrate the firmware update installer to the machine that has the need for the firmware and install it from there when nothing else is attached to it.
    Also there is a firmware downgrade program which I suggest you install first before reinstalling the firmware over again:
    http://www.apple.com/support/downloads/firmwarerestorationcd11.html
    Make sure any third party PCI cards (except the graphics card which came with your computer), USB and Firewire devices are removed before installing the firmware update.

  • WRT350n Firmware Update 1.03.7 - Web page load really slow after update

    Well I updated my WRT350N with the new firmware, but now web pages load very slowly, and streaming video is even slower. Before the update it was blazing fast. I run a mixed network of wireless N and G. Both Wireless N connections connect at 200 or higher Mbps now, which is a great improvement.
    Anybody got any ideas why web pages and steaming video run so slow now.
    Also downloading files never goes above 30 kb/sec now.
    I use comcast cable and downloads were so fast before.
    Thanks in advance.

    check the download speed and the streaming video when the computer is directly connected to the modem

  • Laserjet 1525nw firmware update for macintosh

    Printer HP LaserJet 1525 NW
    OS Mac OSX Lion 10.7.2
    I received an email from HP saying I needed to upgrade the firmware. I downloaded and ran the Mac installer. It crashes when it tries to download the firmware update from the internet. There is no explicit description of the error - the installer simply crashes. What am I supposed to do? I have tried repeatedly downloading the intaller in case the first copy was corrupt. The crash takes place consistently at the same point in the firmware installation process.
    This question was solved.
    View Solution.

    You could try download directly from here to some removable media on another machine (in case your mac is acting up)? http://ftp.hp.com/pub/softlib/software12/COL34888/lj-86474-6/CP1520_Series_FW_Update-20111215.dmg
    The above firmware update utility is for the HP Color LaserJet Pro CP1520 series.
    This utility is for use on Mac OS X 10.5, Mac OS X 10.6, Mac OS X.
    The utility can be used with a USB connection or network connection. Be sure to use the firmware update utility that is specific to you printer model.
    This update is recommended for HP Color LaserJet Pro CP1520 series that has a firmware version prior to 20110329.
    This utility updates the printer firmware version to 20110329 (March 29, 2011).
    The firmware version can be found from "Setup Menu" -> "Service" -> "Firmware Datecode".
    I am an HP employee.
    Feel free to provide Kudos if I have helped you!

  • ZEN Style M300 Firmware Update Ver 1.00.16

    ZEN Style M300 Firmware Update Ver .00.6
    Filesize : 3.72 MB
    Release date : Aug
    This download contains an improved version of the firmware found on your Creative ZEN Style M300 player. It improves the overall stability and Bluetooth user experience. For more details, read the rest of this Web release note.
    What's New:
    Now supports playlists created by Windows Media Player and WinAMP in *.m3u format.
    Improves stability of player when it's paired and streaming music via Bluetooth.
    Allows Bluetooth streaming of Audiobooks.
    Now supports 4-digit pairing code entry for compatible Bluetooth multimedia devices or Bluetooth car stereo decks
    Bluetooth will be turned ON automatically upon restart when it is detected that it was ON prior to shutdown
    Requirements:
    Microsoft Windows 7, Windows Vista, Windows XP Service Pack 2 or later
    USB port
    Creative ZEN Style M300 player
    Note:
    Due to changes in this new firmware, the firmware update utility may not detect previous firmware versions correctly (example: 0.0.000). Please do not be alarmed by this and continue with the firmware installation.
    To install this firmware, do the following:
    . Download the ZENFWUpdater_M300_v.00.6.exe file to your computer's local hard disk.
    2. Close all application windows that are currently running on your computer.
    3. Connect your player to your computer.
    4. Back-up your player's content before proceeding with this firmware update.
    5. Double-click the downloaded file and follow the instructions on the screen.

    The M300 not remembering previous Bluetooth state, on and streaming after power down, was inconvienient. Happy to have found?a firmware update addressing this issue.
    Updater reports my current firmware at 0.00.000 and that it would take it to .00.6.
    Following update,?the updater reports that the "update failed".
    The update does in fact appear to have been successful. System > Information reports the firmware as being .00.6 and powering on the device now reinstates Bluetooth conectivity.

  • HP LaserJet 1518ni - Firmware update doesn't do anything

    Hello folks
    I am trying to update my HP LaserJet 1518ni to the latest Firmware (2013-11-08 , Version20130923, 4.22M).
    My current firmware datecode is: 20120110
    I went here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3422472
    Downloaded the file CP1510_Series_FW_Update-20130923.exe
    Turned Firewall and AntVirus OFF, ran the Executable with administrative priviliges - it says it found the printer and I see a progress bar and also the smiley at the end. But the printer is unimpressed and shows just "Ready" in the LCD, nothing changed: The files does simply nothing.
    Tried it via IP Port and also USB on another PC, same effect.
    What is going wrong?
    Where are the good old .RFU Files I just can TFTP to the printer...?
    Thanks,
    Thomas
    This question was solved.
    View Solution.

    Hello @TomPe , and welcome to the HP Forums!
    I see you're experiencing firmware issues. I'd like to help!
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Once you have run the doctor, try installing the firmware via this tool:
    HP Color LaserJet Printer Firmware Update Utility
    Also, can you print standalone?  I would recommend pressing the right arrow until you see reports, press OK, select diagnostics page, and press OK.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Firmware Update for Yoga 11

    Hi all,
    I thought I would inform you all that my Yoga 11 (Windows RT) had just received a firmware update via Windows Update.
    Please, see the details below:
    System Firmware Update - ‎15.‎10.‎2013
    Installation date: ‎16.‎10.‎2013 20:11
    Installation status: Succeeded
    Update type: Important
    These updates are released by PC manufacturers to help improve the stability and performance of PC hardware.
    Prior to the installation Windows Update showed a warning that the battery should be charged before rebooting.
    Machine rebooted, firmware updated, all went fine. I just wonder what changes/improvements were made by Lenovo.
    Has anyone got an idea? Can Lenovo comment here maybe? Thanks! (I suspect that it has to do with the coming Windows RT 8.1 Update.)
    UPDATE
    According to Event Viewer the Touch Controller, the Synaptics Touchpad as well as the Keyboard firmware have been updated (see details below).
    TOUCH CONTROLLER
    Device UEFI\RES_{60fd52f4-b123-4940-922b-3d9eccecf87f}\0 was configured.
    Driver Name: oem60.inf Class GUID: {F2E7DD72-6468-4E36-B6F1-6488F42C1B52} Driver Date: 08/21/2013 Driver Version: 2.7.172.10156 Driver Provider: ATMEL Driver Section: Firmware_Install.NT Driver Rank: 0xFF0001 Matching Device ID: UEFI\RES_{60fd52f4-b123-4940-922b-3d9eccecf87f} Outranked Drivers: c_firmware.inf:UEFI\CC_00010002:00FF3000 c_firmware.inf:GenFirmwareResource:00FF3001 Device Updated: true
    Driver Management concluded the process to install driver touchfw.inf_arm_32096d1e0e72e793\touchfw.inf for Device Instance ID UEFI\RES_{60FD52F4-B123-4940-922B-3D9ECCECF87F}\0 with the following status: 0x0.
    TOUCHPAD
    Device HID\SYNA2B0E&Col02\3&1999b6d1&0&0001 was configured.
    Driver Name: oem59.inf Class GUID: {745A17A0-74D3-11D0-B6FE-00A0C90F57DA} Driver Date: 07/11/2013 Driver Version: 16.2.4.114 Driver Provider: Synaptics Driver Section: SynRMIHID_Device.NT Driver Rank: 0xFF0001 Matching Device ID: HID\SYNA2B0E&Col02 Outranked Drivers: oem25.inf:HID\SYNA2B0E&Col02:00FF0001 oem29.inf:HID\SYNA2B0E&Col02:00FF0001 input.inf:HID_DEVICE:00FF1004 Device Updated: true
    Driver Management concluded the process to install driver synrmihid.inf_arm_b0eee9ea8f37fdcd\synrmihid.inf for Device Instance ID HID\SYNA2B0E&COL02\3&1999B6D1&0&0001 with the following status: 0x0.
    KEYBOARD
    Device HID\NVDAF180&Col01\3&10212ce&0&0000 was configured.
    Driver Name: oem57.inf Class GUID: {4D36E96B-E325-11CE-BFC1-08002BE10318} Driver Date: 07/11/2013 Driver Version: 16.2.4.114 Driver Provider: Synaptics Driver Section: SynKB_HID_Inst Driver Rank: 0xFF0000 Matching Device ID: HID\VEN_NVDA&DEV_F180&Col01 Outranked Drivers: oem26.inf:HID\VEN_NVDA&DEV_F180&Col01:00FF0000 oem51.inf:HID\VEN_NVDA&DEV_F180&Col01:00FF0000 keyboard.inf:HID_DEVICE_SYSTEM_KEYBOARD:00FF1003 input.inf:HID_DEVICE:00FF1005 Device Updated: true
    Driver Management concluded the process to install driver synzkb.inf_arm_6b791db96e160c24\synzkb.inf for Device Instance ID HID\NVDAF180&COL01\3&10212CE&0&0000 with the following status: 0x0.
    Best regards
    ronaldlangley

    Hi,
    The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
    The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
     Try updating the firmware wirelessly as following:
    On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
    From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
    Follow the steps on screen to update the printer.
    If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Firmware update for officejet x64 could not find printer

    The firmware update for officejet x64 could not find printer.  Printer is on wireless network.

    Hi,
    The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
    The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
     Try updating the firmware wirelessly as following:
    On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
    From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
    Follow the steps on screen to update the printer.
    If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Request Battery Firmware Update Utilty for Lenovo B490

    I use a power manager in my laptop B490, my battery 6cell . Design capacity 48Wh but reduce to 40.40Wh , and full charge capacity 42.82Wh. I will to restore design capacity my battery but Change the option from "Automatically optimize for my battery lifespan" to the "Always fully charge" not affect.
    and i try download Battery Firmware Update Utility , not useful for my batter FRU P/N  : 45N1049.
    Please help me :x

    Von so einem Quatsch, den der so genannte Techniker angeraten hat, würde ich auf jedem Fall absehen. Auf der Supportseite von Lenovo ist eindeutig zu entnehmen, dass die BIOS Versionen 1.25/1.20 aus dem Jahr 2012 und die 1.15/1.17 aus dem Jahr 2013 stammen. Ich denke, dass es sich um unterschiedliche Geräte handelt und entsprechend eine bestimmte BIOS Reihe unterstützt wird.
    Im Readme steht:
    Versions 1.25 (for BIOS ID 6Zxxxxxx-based computer)
    1.20 (for BIOS ID 6Yxxxxxx-based computer)
    und
    Versions 1.15 (for Machine types: 0217 and 0250)
    1.17 (for Machine type: 0221)
    Ich denke, dass ich mit meiner Vermutung richtig liege.
    Wo du eine BIOS Version 1.18 beziehen kannst, das weiß ich nicht. Vermutlich gibt es keine neuere Version. Ich würde auch nicht krampfhaft probieren eine falsche aufzuspielen.
    Meine Frage ist, wie lange die Akku, so im Normalbetrieb reicht?

  • Megastick 256 firmware update failure (USB 2.0 version)

    When I update the firmware of my Megastick 256 (the new "silver" USB 2.0 version), it would not turn on  anymore and seems completely dead. I can "revive" it by removing the battery and connecting it while the "Play" button is pressed and "downgrade" to the firmware version from the included CD (version 2.000.008). I would like to update to 2.011.002, 2.100.000 or 3.000.013, but all of them turn the stick into a dead brick. My computer only has USB 1.1, but I don't think this is the problem.
    Ths update utility tells me that my stick has "chip version" 3500.
    Another problem is that the firmware update utility will report a timeout when I connect the stick with pressed "Play" button, and the firmware version present in the "msi-5112" directory is not 2.000.008. I can only update by connecting the stick normally.
    Has anyone managed to update the firmware of the new revision of the Megastick? If so, how exactly did you go about it?
    Thanks in advance

    - Do you also have the USB 2.0 version of the stick?
      it is usb 1.1
    - Does your computer support USB 2.0?
      yes
    - How exactly did you do the update (when did you press "Play"?).
       Held play down,plugged into computer, kept holding play
       until recover device was visible.
      Copied and unzipped the new firmware to c:Program Files\MSI\MSI551X
      Ran the program START->Programs ->MSI->MS 551X Update
      Check the update firmware was 3.xxx and click Start or Okay.
       waited for it to finish.  unplugged mega stick and powered it on.
    - What was the original firmware of you stick?
       2.11.2
    - Did you use the update program from the CD or the one from the MSI page?
       from the cd
    - Did you have the battery in the stick for the update?
       yes.

  • Firmware update for N72

    hi all i am having nokia n72.i want to update my firmware.
    plz tell can we remove our memory card when we do our firmware update.Message Edited by hiitsds12b on 01-Apr-200701:34 PM

    Hi,
    The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
    The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
     Try updating the firmware wirelessly as following:
    On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
    From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
    Follow the steps on screen to update the printer.
    If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Apple RAID Card Firmware Update crashes

    Early 2008 Mac Pro 2.8GHz Quad Core Intel Xeon
    I'm trying to install Apple's RAID Card Firmware update on my 2008 Mac Pro (which yes, has a RAID card) and every time the update utility launches it immediately crashes because it couldn't load the CoreRAID framework:
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/CoreRAID
      Referenced from: /Applications/Utilities/Apple RAID Card Firmware Update.app/Contents/MacOS/Apple RAID Card Firmware Update
      Reason: no suitable image found.  Did find:
              /System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/CoreRAID: mach-o, but wrong architecture
    I've tried reinstalling the CoreRAID framework directly from the Mavericks install image with no luck. The same thing was happening with 10.8 and I was hoping 10.9 would fix it.
    I did a lot of Googling and someone in a somewhat related issue suggested running "lipo -info" on the library. If that's helpful to anyone here's the output:
    lipo -info CoreRAID
    Non-fat file: CoreRAID is architecture: x86_64
    but from that it looks like it should have no problem being run on my Intel Mac Pro.
    Any help would be appreciated, it's annoying that Software Update keeps informing me that I have a pending update, and every time I log into my server I get a crash alert from the

    Well, I went ahead and opened a support ticket on this.
    Tech on the phone was not immediately able to come up with a solution, and has escalated it to engineering.
    I am willing to bet that the RAID Card firmware update doesn't "know" about MP11.005D.B00 -- and will only install with MP11.005C.B08.
    The question is this: What is the difference between MP11.005D.B00 and MP11.005C.B08 -- and does this impact the Hardware RAID in any way?

Maybe you are looking for