WRT54G to DirTV/PS3

I currently have my PS3 connected wirelessly to my WRT54G but get a weak signal at times. I have recently gotten DirecTV (HR21) and want to add it to my network. It is sitting in the living room next to my PS3.
What I want to do it add a wireless device in my living room that will connect to my WRT54G in my office and will connect via cat5 to both the DirecTV box and the PS3. I can think of several solutions which would require me purchasing two devices (a. 2 wireless adapters, b. 1 wireless adapter and a wired switch/hub)
Can anyone suggest a better alternative, preferably only using one device?
Thanks !
P.S. I currently plan on adding longer cables to my WRT54G so it will reach a higher spot in the office, with better l.o.s. with the living room. Hope to increase wireless signal to living room.

Wizzard wrote:
Yes you can go for WET200..... it will serve you for the same ....
Message Edited by Wizzard on 07-07-2008 03:19 PM
Thanks !!!!!!

Similar Messages

  • Wrt54g router and ps3

    okay i have a wrt54g version 6 router, with 1.02.2 firmware, and no matter what i do, i cant get the NAT type on the ps3 to get to 2, its always 3, so i cant play some games online, ive tried forwarding the ports with dmz off and UPnP off, and ive tried putting the ps3 in the dmz and turning UPnP on, both with no luck, any help would be appreciated

    hi... try reducing MTU to 1452, check the status and note down the DNS addresses and try setting up static DNS on playstation...also tell me which ports you've forwarded?? let me know which internet connection are you using, is it DSL?

  • WRT54GS problems connecting PS3 to PC Vista Basic network to enable Media server access

    I have a the above router and a new PS3.  I am trying to connect it to me Windows Vista PC so that I can use WMP11 as a media server.
    The PS3 is connector to the router with a wired connection and I have no problems with it connecting to the inter net and a network connection tests pass ok, with NAT = 2.
    The Vista PC is connected to the router via wireless.  It coneects to the internet ok.
    When I try to view a full network map in the vista PC I cannot see the PS3 nor and unknow devices.  Likewise I cannot see the PS3 or an unknow device when I Select Media Sharing fron the WMP11 option.
    Can anyone please help me?
    Thanks in advance
    Andy

    Check your Firewall Settings, Did you Enable File and Printer Sharing ?

  • Wrt54gs problems with ps3

    ok every time i tried to connect it gets it but it wont give me the upnp and i have restricted nat i have tried many thing but i cant find a way to get it to work....and now it seems i don't even get connection

    onthe router web ui , trigger ports 10070-10080 and 6000-6999 .. also , make sure that the firmware is latest for the router ..

  • Router blocks some things it shouldn't

    Okay, so I had to go through and switch out an old router for a Linksys wireless router (WRT54GS) so the PS3 could access the internet wirelessly. Right now two computers are physically connected to the router, mine and my father's. My computer is running Vista and has no restrictions on internet and internet-based applications (e.g. MSN Messenger). My dad's, on the other hand, is running Windows 98. He can get onto the internet but for some reason he can't get onto Yahoo Messenger. It was working fine before I switched the routers and I haven't messed with any of the wireless router's settings. They are actually both Linksys routers but the first one is quite old. What do you think could be the problem?
    Message Edited by Night on 12-05-2007 12:36 AM

    If the Yahoo Messenger is a recent version, there is a setting in the "Preferences" menu that you may need to change. Click on the "Firewall with No Proxies" options if it's available on your version. If not, you may have to do a reinstall of Yahoo Messenger. Remove it first, reboot then download a fresh copy.
    Are there other applications that are not working?

  • Old router usable as a repeater?

    Hi folks,
    Just brought home a WRT310N and it works great, but I'm still having trouble with weak signal in certain parts of the house. I still have a working wrt54G which is currently sitting unused.  Is there a way I can add it to the mix to build a better home network?
    Take care,
    Chris

    thanks Fr0ns for the reply... I suspected it wouldn't work together with the WRT54G that way
    Any ideas about what I might try? The router in use is WRT310N (and modem) are in one corner of the house, where most of the computers and gadgets live.  but there's a TV and PS3 at the other end of the house.  signal strength, according to the PS3, is about 25%.  there is a spare router, a WRT54G.
    By bridge, do you mean I can wire the WRT54G to the PS3, and position it at a midpoint, closer to the other router? So the two routers communicate wirelessly but have devices wired into them?  How do I have to configure things?

  • WRT54G with PS3 NAT TYPE 3 needs to be changed!

    Hi all,
    I've been trying to change my Nat type from a 3 to a 2. I have a ps3 20gig (sadly) that is directly connected to my laptop (wired). My laptop has wifi and I'm able
    to play games online. The only problem is that I'm not able to invite friends into my party or host any games for Call of Duty 4. My ps3 is set at Nat Type 3
    and I think that's the problem here. I have a Linksys WRT54G router and UPnP is enabled on it. My laptop has UPnP enabled as well. I've tried everything I could
    find, but there's not much info for someone who has a setup like me.
    I setup a static ip for the ps3 on my laptop, and the only ip that will work is 192.168.0.10.
    Here is my ipconfig:
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\MADE>ipconfig/all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : MADE
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : Yes
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : no-domain-set.bellcanada
    Ethernet adapter PS3:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit E
    thernet NIC
            Physical Address. . . . . . . . . : 00-17-31-25-3B-27
            Dhcp Enabled. . . . . . . . . . . : No
            IP Address. . . . . . . . . . . . : 192.168.0.10
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . :
    Ethernet adapter Wireless Network Connection:
            Connection-specific DNS Suffix  . : no-domain-set.bellcanada
            Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Networ
    k Connection
            Physical Address. . . . . . . . . : 00-13-02-1D-36-FC
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.101
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.2.1
            Lease Obtained. . . . . . . . . . : Wednesday, November 21, 2007 12:39:2
    9 AM
            Lease Expires . . . . . . . . . . : Thursday, November 22, 2007 12:39:29
     AM
    Any kind of help would be apprieciated.

    IP Address. . . . . . . . . . . . : 192.168.1.101
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 192.168.2.1
    Your WRT54G is connected to another router (maybe your modem?) which has IP address 192.168.2.1. To get that working you have to configure port forwarding on 192.168.2.1 and on the WRT54G at 192.168.1.1. UPnP won't help you here because UPnP will only configure the WRT but not the router to which the WRT is connected to. Thus you have to set explicit port forwardings (don't know which ones the PS3 requires).
    Otherwise consider setting up the WRT as access point only like this.
    Or find out how to set the modem into bridge mode (i.e. turn off the router in the modem). After that you have to configure the router for your internet connection (usually PPPoE for DSL or DHCP for cable). This way you have the WRT54G directly connected to the internet.
    Message Edited by gv on 11-21-2007 05:41 PM
    Message Edited by gv on 11-21-2007 05:41 PM

  • WRT54G Wireless G Router and PS3

    Hi there, I am a proud owner of the above mentioned items. The reason why I am posting this is that when I am playing on the PlayStation 3 and one of my other family members are on a hardwired computer, the hardwired computer I believe looses it's connection to the internet, but my PlayStation is still connected to the internet, and it works very good. My setup for my network is I have a laptop, Nintendo Wii, and PS3 connected wirelessly, and I also have two hardwired computers. I asked around on the internet, and other people said that I should not be having issues, and if I were that it might be something wrong with the firmware of my router. I do have the router fully updated with the latest firmware, so don't recommend that to me. So my question is, is anybody else having a similar issue, or am I just all alone on this, and is this a firmware issue, and if so, is Linksys doing anything to fix this issue? In case if anybody was interested, I have the version 6.0 of the WRT54G router.

    Make sure your firmware is up to date. If not, upgrade it, reset and reconfigure the router.
    The box said windows xp or better... So I installed Linux!

  • Help needed with ps3 and wrt54g

    Hi,
    I need some help on my ps3 on connecting to my router. I am able to connect my ps3 to my router Linksys wrt54g using wired connection and able to connect to the internet.
    But when ever I on the media server network to link to my pc to share files. My Ps3 starts to prompt that the cable is not connected and my router starts to restart.
    Can anyone pls help me.....tks

    Do you have UPNP enabled on the router and is your pc's firewall configured for file sharing?

  • Using WRT54GS to connect Desktop, Laptop, and PS3 to Network

    Hello.  I currently have a Linksys WRT54GS plugged into my Comcast Cable Modem (the Motorola one without build-in WiFi).  I have my desktop connected via an ethernet cable.  My laptop and PS3 are wireless.  I have been trying for some time to set up a network in my home where: I have internet on all 3 devices, the desktop and laptop can share files, and the PS3 can view the files on both computers.  I know this is possible.  So far, my PS3 recognizes my laptops shared files by default (no changes to network made).  The only device out of the loop is my desktop machine.
    By the way, both computers are running Vista Ultimate and the PS3 is on Firmware 2.60.  The router has the latest firmware also.
    Thanks, in advance, to anyone who can help.
    PSN: Darkness30XX

    If you want to enable file sharing between your Desktop and Laptop may be you can try some of this settings, this will help you out.Go to this Link.
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5560&p_created=1173436226&p_sid=AiuwVOqj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjA1LDIwNSZwX3Byb2RzPTAmcF9jYXRzPTE3MjEsMTcyMyZwX3B2PSZwX2N2PTIuMTcyMyZwX3NjZl8zPTEmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1zaGFyaW5n&p_li=&p_topview=1

  • PS3 and linksys WRT54G. found a fix!!! please look

    http://vibrantreality.wordpress.com/2007/10/27/ps3-and-linksys-wrt54g-the-solution/ not sure if it has been posted but it works!!! enjoy

    Let me review my setup. I have a WRT54g Version2 Linksys Router. The Router firmware has been updated. I have two computers wired to the router and they work fine. I have a Linksys Media Center and a Laptop that work in a wireless environment and they work fine. The ISP is Comcast.
    The PS3 is wired through a Linksys switch to the same Router. The switch is a Linksys Etherfast 10/100 8-Port Workgroup Switch EZXS88W ver 3.1. On the PS3 I have tried all the combinations of DNS that I can identify. The setting for MTU is at 1492 which matches the status shown on the Router screen. I have tried UpNp in both the Disabled and Enabled modes. I am currently using the DNS's that appear on the Status page of the Router.
    On the Router I have set the IP address for the PS3 up as a static address in the DMZ as 192.168.1.2 UpNp is currently disabled. I have assigned ports to the static IP in the Gaming screen and enabled them..I have entered the DNS's numbers from the Status page on the Setup page for the Router as static IP DNS's.
    If I connect the Laptop to the same wire that the PS3 is currently connected to, the laptop comes up fine on the Internet. The PS3 finds the IP address but continually gives me the DNS failed (80710102) error message. This is also true if I run the PS3 in a wireless environment.
    Your assistance is greaty appreciated. 

  • Another PS3 wireless to WRT54G question

    Ok first off i have read tons of PS3 and WRT54G posts and i find nothing that is similar to my situation.
    First off i have a PS3,PSP and a Squeezebox 3 that i am trying to get connected wireless to my WRT54G v6.I have WEP enabled on the router so for all three devices i manually assign an IP,WEP key,DNS and so on but they will not respond no matter what configuration i try.
    The only way i can get these to work online is to connect them to a seperate wireless bridge like the WMB54G or the WET11.I configure those with my WEP keys and IP's and all is well.I have yet to connect them straight to the router hardwired but i am really looking to get these setup by having then use their own wireless configuration.
    Since all three of these do not work on their own i find that it could be a router thing but then again they connect by a wireless bridge just fine.
    Anyway's thanks for anyone that knows what it could be.

    Well i finally just got connected to my PSP with WEp enabled.It looks like the PSP liked the KEY 1 but i had the default key of 4 asigned instead.I changed it to 1 and it is good.This is where i found my info.
    http://boardsus.playstation.com/playstation/board/message?board.id=pspnet&message.id=61134
    Now hopefully this helps someone that is having the same trouble.

  • PS3 Game Update Stops (WRT54G)

    Hey, I have been playing ps3 online for over a year now and had a different router in my old house.  We just got charter set up in our new house today and have a linksys (WRT54G) router.  I'm trying to update a new game's version but it gets to 10%-20% and just stops due to the wireless cutting out.  Sometimes it randomly signs me out to, but I was playing COD earlier and it worked fine.  Any ideas why I can play games fine, but the update stalls over and over?  Thanks!!
    Solved!
    Go to Solution.

    To resolve this you should Upgrade your router's firmware...
    Download the Firmware from here
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Also make sure that your computer is set to obtain IP automatically, disable any firewalls, security softwares on the computer before trying to access the setup page...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Also on the router's Security tab uncheck Block Anonymous Internet Requests and click on Save Settings...
    Under the Administration tab disable UPnP, under the set up tab change the MTU size to 1452...

  • PS3 timeouts with WRT54G

    Ok so i have WRT54G wireless router... Seems like anytime i have two of my PS3 playing Call Of Duty online we seem to keep getting kicked off. It tells me server time out. It happens once every ten minutes or sometimes it get bad and it happens every minute. The signal strength is at 95%. When only one of us are playing it seems to get better but it still kicks me off. Please help!

    Hello
    I'll assume the laptops are connected wirelessly. Can you test them on an wired connection, and determine if the wired connection goes down the same time as the wireless connection?
    Have you tried other channels? You may be getting interference from a cordless telephone, microwave oven, or something else.
    -- Dan Meyer
    http://www.linkedin.com/in/danielrmeyer

  • Wrt54g / PS3 problems 'TIMEOUT'

    CANT WORK THIS OUT GIVING ME A HEAD ACHE!!! passed 5 days cant play PS3 online, only PSN network acc. is the problem i have an ip address i can download from store/use internet but goto login and paly on the playstation network and i'll only stay logged in for 30's to 2 mins then i get a sever timed out message on screen have spoken to sony and my ISP had a line checkeverything ok both ends my set-up is Ips cable modem [virgin media] linked to a belkin 4 port hub [ 2 towers and a printer [networked]] then linked to my linksys wrt54g ver.5 i think, this has PS3 and 2 laptops hardwired to it wiresless turned off the belkin has its DMZ is open to give the linksys full ports open to its ip address, then the port forward is set for all sonys ports + ip address as i say i have no issues downloading on laptops/towers or even printing, but my PS3 will not play games on-line i cant be the only one with this problem Any one help???
    not USA im UK
    cant change this in my profile!!

    doubt that had 3 new ps3's inside of 2 weeks 1 blue ray drive packed in 2/ possible faulty network card on no. 3 now still have issuses down side first one i had, no problems at all [also no port forwarding or dmz needed to be set-up!!!] have moved now to a belkin 4 port hub no wireless and a 5 port switch [ also belkin] still have this issue, so no router/home network problems had line tests from isp anyother ideas guys?? or this system will be sent back and money asked for!
    not USA im UK
    cant change this in my profile!!

Maybe you are looking for

  • Looking for a replacement lcd for aa 17'' imac late 2007

    The title pretty much sums it up. I am looking for opnly the poart as I can install myself. I know about ebay and craigslist so pls do not post suggesting those routes. I am not looking to pay more thatn $400 as I could sell of its components and be

  • HELP PLEASE! Face time and iMessage no longer work on my iPod touch 4th generation

    Everytime I get on Imessage it says that I need to sign in so I do then it says to hit verify that the email im using is the one thatll be for imessage so i do then it just sends me back to the sign in page I've tried rebooting it and everything some

  • OBIEE 11.1.1.6 External Security Issue

    I have setup MSAD in WebLogic successfully, however my issue is that no user can log in unless I assign their ID to BIAdministrator role. If I assign my ID to that role I can login. If I assign my ID to BIConsumer role it fails. I have the same setup

  • Common customer for all vendor returns

    dear friends, In my current project all our stocks are maintained by a third party warehouse who receives material from vendor and despatches to customer. Despatch Instructions to him is sent by outbound delivery from SAP. When vendor return happens

  • Using web service as data source on CRXIR2

    hello i do have some trouble connecting SYBASE ASA acting as web service and my report. it work fine with CRXI and i get error 411 on CRXIR2 when sniffing trame on network it seem that in HTTP layer the content-length is not generated by CRXI ... in