DHCP does not work while connected to TC throuh ethernet

I currently have a WRT54G router and a time Capsule. The WRT is connected to a cable modem, and the Time Capsule is connected to the router through a LAN port. The WRT assigns addresses in the range of 192.168.15.90 to .99 and the TC assigns addresses between 192.168.15.100 to .109. Connecting to the TC's wireless network works, but connecting to the TC or the router through an ethernet cable does not give an address. I have tried doing DHCP just on the router, just on the TC, and on both, and nothing seems to work, except a wireless connection. Is there a way to fix this?

Have you set up Connection Sharing to "Bridge Mode"?

Similar Messages

Iphone 5c clock does not work while asleep

done hard reset updated on and off set automatically time but it works while the device is in use

iphone 5c clock does not work while asleep
I have to ask how you know... does it show the right time before you go to sleep? When you wake up?

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

Cancel button functionality does not work--- while searching for G/l Acc

HI SAP SRM Gurus,
This is regarding an issue faced by the end user.
For information my client is on WAS 6.4 Patch Level 155, SRM 4.0, EBP 5.0, SRM Server 5.0.
In account assignment details..while searching for G/l account for the Account Assignment used at the time of creation of the shopping cart, if no G/l account is found, the Cancel button functionality provided, does not work, however when
G/l account(s) is/are found, then the Cancel button functionality
works properly.
Kindly assist.
Awaiting your reply in this regard.
Thanks in advance
Ankur

Hi,
Sound like a bug.
Did you open an OSS ticket ?
Kind regards,
Yann

Em.merge does not work while em.persist does?

Hello,
I have a stateless session bean with code snippets below.
    @PersistenceContext
    private EntityManager em;
    public void setList(ContainerList list, int key) {
        ContainerList stored = (ContainerList)em.find(ContainerList.class, key);
        list.setId(key);
        if (stored == null) { em.persist(list); }
        else {
            em.merge(list); // 1st alternative
//            stored.copy(list); // 2nd alternative
...When I call the method setList for a non existing key, the entity is stored in the database. When I call the method for an existing key, the old value is not updated by the new, i.e. the merge method has no effect. If I comment out the 2nd alternative, it has no effect either. Does anyone has an idea why this does not work? I am using Netbeans 5.5 and 5.5.1 release candidate 1. (With the included application server.)

Hello,
I will try to summarise my knowledge of the JAVA persistence API as the documentation is not always clear and may be misleading.
In SQL you have 4 main statements: INSERT, SELECT, UPDATE and DELETE.
with
@PersistenceContext
private EntityManager em;some documentation appears to make the following associations:
em.persist(Object entity) -> INSERT
em.find(Class entityClass, Object primaryKey) -> SELECT
em.merge(Object entity) -> UPDATE
em.remove(Object entity) -> REMOVE
However, practice shows that this is NOT the case!
em.merge(Object entity) does exactly the same thing as em.find(Class entityClass, Object primaryKey)! The only difference is that the em.merge(Object entity) method takes a detached object of the entity class as argument with the same primary key as the attached object you are loading.
Detached objects are objects of the entity class the database manager is not aware of. Attached objects are objects in the database and are managed by the persistence context. Every newly created object of an entity class is detached. You can attach them to the database with the em.persist(Object entity) method call. Attached objects can be retrieved with the em.find(Class entityClass, Object primaryKey) or with the em.merge(Object entity) method. All changes made to attached objects are automatically stored in the database. There thus is no explicit method for the UPDATE statement. You just make changes to attached objects and the entity manager copies the changes to the database (at the end of the persistence context). An easy way to make all the changes you need at once is to have a detached object that contains the right values and then copy all these values to the associated attached object with a self defined copy method in the entity class as in
   Entity detached;
// --> begin persistence context
   Entity attached = em.merge(detached);
   attached.copy(detached);
// <-- end persistence contextIf you are working with session beans, the persistence context standard begins with the beginning of a transaction and ends with the end of a transaction. A transaction standard begins with the start of a session bean method and ends with the session bean method. If you choose to, you can make the persistence context of type extended with
@PersistenceContext(type=PersistenceContextType.EXTENDED)
private EntityManager em;In this case, the persistence context ends when the session bean is removed from the EJB container. (Can be useful to keep attached entities in the state of an stateful session bean.)
Without session beans, you have to declare explicitely the start and end of a persistence context or transaction, but I refer to existing documentation for this, as I do not actively know how to handle things without session beans.
Finally, the methods em.persist(Object entity) and em.merge(Object entity) use a detached object as argument, while em.remove(Object entity) uses an attached object as argument (using a detached object results in an Exception thrown).
I hope this makes some things clear

Why is it that my ipad 3rd gen does not charge while connected to my laptop

my ipad 3rd gen will not charge while connected to my laptop, just beside the battery meter it states not charging.

Beacause the USB port of most computers don't supply sufficient current to properly charge it. It is best to charge it using the supplied power supply.

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

Siri not working while connected to Audi AMI

it turns out that I cannot fully use the features of my iPhone while
connected to a certified car audio system (Audi Ami).
env: iOS (10a403), iPhone 4S ,audi q5 , ami hw h07,sw 0350, Bluetooth Nokia bh-202
issue: iphone connected to car through cable, BT paired and working for phone answ.
action 1 (OK): press BT to wake up SIRI,it works.
now start listening music, for the very first time after connecting the phone .
action 2 (KO): press BT to wake up SIRI , music fades out, Siri pops up , BT 'bips' intending
              that audio is ready, suddendly Siri closes immediately after bip just like you press BT ,
              with no way to speech anything. The same action performed without being attached
              to AMI works as expected.
action 3 (work around) : while listening music and without Siri working as described in action #2,
            activate 'Podcast' app , select an existing podcast and play it.
            you will continue to see the previous song title still on AMI display but the sound is actually your podcast
            (first little bug). now press pause/mute on the radio and press BT to wake up Siri,
            it will works.
others: pausing/muting AMI , switching it completely off , switching off the car while playing music
           does not workaround the problem.
it seems that the behavior is different when 'Music' app is playing audio or when another application
('Podcast') is playing audio. For this reason I tend to blame Apple's software than Audi sw.
it seems that the issue is related to the fact that the phone try to use not the BT mic to
listening for commands but search (and fails) , for some other (car?) mics.
I'm available for further test with some kind of debug app to produce diag information .

Hi ,
In the meaning while I upgraded to 5S (IOS 7.0.4), this introduced the Lightning-to-Dock adapter .
I'm using the Apple's original adapter and things seems still working (I wonder) , I mean :
+) if you are listening music, it's enough that you pause it from AMI and kick in SIRI with BT/HeadPhones long click
If you do not use this WA, SIRI seems dumb , even if you use IPhone-s MIC/HeadPhones/BT .
I guess that the AMI is keeping control of the music app and redirects the MIC elsewhere (maybe
assuming that AMI have his own MIC) . I think that if this problem can be reproduced with another docking
station for IPhone that access the music library directly and take control of Audio/Mic
AMI can be definitively ruled out from this (BUG?) .
I would call it BUG because it expected that SIRI activation should override any MIC redirections and prefer MIC/HPhone/BT.

Inbound Delivery quantity tolerance does not work while receiving goodsLM01

Hi Friends,
Please help me in filding solution to the below issue.
A PO created with 100 quantity having tolerance limit of 25 %. A corresponding inbound delivery document created
against the PO for 110 quantity. Now user wants to receiving the actual quantity i.e 120. While receiving system throws an error
"Maximum open quantity 110 can be packed". I provided a solution that the user need to change the delivery quantity from 110 to 120 and than do the GR using LM01. User does not agree to do it as the inbound delivery document created automatically through
SNC system. User want to make it automation like the inbound delivery document tolerance % should work for the difference quantity between inbound delivery quantity and actual goods receipt quantity.
Thanks in Advance. Any solution highly appreciated.
Thanks
Santosh

LM01 is a dynamic screen which is easily configurable with simple logic and coding. I'm not sure whether any standard configuration to activate the message for LM01.
But how it works for us. We've defined the messages for tolerance "Entered Quantity 1200 Plus previous received
quantity 0 is greater than over delivery tolerance 3.0% " in message class. And system pulls all the messages related to LM01 from this message class. Check with your developer how your LM01 is customized. They can help you.

Networ to linksys g does not work but connects

connect to secure linksys G router with WPA using webkey
password accepted but does not connect just searches but lists network with lock

Go to Settings/Wi-Fi and tap the arrow to the right of the network to which you are connected. What is the IP? If it is 169... then unfortunately you are not connected to a network, your iPad is timing out and giving itself an IP because the router is not giving it one.
If that is what is happening then give the router a kick in the can by resetting it to factory settings and then powering it down about five minutes before powering it up.
While the router is powered down go to Settings/Wi-fi again and tell your iPad to forget the network. About two minutes after you have powered up the router go to Settings/Wi-Fi and tap Other... Enter the name of your network, select the form of password security the network uses and return and enter the password. Tap Join.

HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer. The sound still comes from the speakers. Any solutions?

The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds. The sound still comes from the speakers and is not redirected to the head phone. The port has never worked. Any solutions?

okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
JB

Failover not working while connecting to Oracle 11g database

Hi,
We have a J2EE application that connects to Oracle 11g database.
The connection URL we are using is as below
jdbc:oracle:thin:@(DESCRIPTION =(SDU=32768)(ADDRESS=(PROTOCOL=TCP)(HOST=abc.hostname.com)(PORT=1525))(ADDRESS=(PROTOCOL=TCP)(HOST= xyz.hostname.com)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=PQR)))
The issue that we are facing is, the database failover is not working.The application only connects to the first host in the TNS entry.Evertime there is a failure in the connection to the first host,manual steps are required to swap the hosts.
This started happening after we upgraded Oracle DB from 9i to 11g.
We are using the client jar of 9i to connect to 11g. Could this be causing the problem?
Thanks In Advance.
-Tara

889517 wrote:
Yes, you are right. Nothing else was updated.
The application still works as expected except the failover.If you are correct then I seriously doubt it has anything to do with java. It would be something to do with Oracle and/or network infrastructure.
If not then it is some small problem with the driver. You can try updating the driver but I wouldn't expect a fix.

Safari 5.1 does not work, while other browsers do

Hi all,
My Safari 5.1 browser does not seem to work. It opens, loads for 1/4 and stays there. Not a single page can be opened, even after amtoying the cache.
Other browsers, such as Chrome and Firefox have no trouble funcioning as well. What might be a solution?
Thanks!

The Spotlight menu, the little magnifying glass in the upper right corner when clicked will reveal a search field, and if it is indexing, it will tell you. Otherwise all you see is a search field, and sometimes results. Indexing is what allows it to know every word in every file on the hard drive, and what to search for. Safari, being an integral part of the operating system, uses some of the indexed values from Spotlight for its operation. If that index is corrupted, it might need to be reindexed to function. If you use any tools that clean system cache that can also affect Safari and other Apple applications. Those tools should only be used for troubleshooting a backed up system. So the first thing we have to discover is, is your data backed up? Because then we can suggest methods for detecting what caused corruption. Obviously you have enough disk space.

IPad will not start. Reset DOES NOT work. Connecting to iTunes DOES NOT work

My iPad went dead and sat for a few days before I plugged it in. Now it will not start. It has been plugged in for 2+ days now with OEM charger. The apple logo will show for a couple seconds and it turns off. Reset DOES NOT do anything. If I unplug it, nothing happens, no apple logo, no reset, nothing. Plugged into iTunes it will not do anything. The only time I get it to show activity is plugged into charger and like I said, as soon as the logo appears it shuts down and repeats this over and over until I unplug.

See if you can have any success with recovery mode.
iPad: Unable to update or restore - Support - Apple
If that doesn't work, then make an appointment at an Apple Store and let a genius have a look.

DHCP does not work while connected to TC throuh ethernet

Similar Messages

Maybe you are looking for