WSRP portlet - authentication info possibly lost due to cookie

An authentication information is not being sent in soap header from Consumer to Producer during WSRP interaction. userAuthentication is also set to unknown: <urn:userAuthentication>unknown</urn:userAuthentication> .
Producer and consumer are on the same https server but they are on different domain. For example, Producer is accessed /yyyPortal while consumer is /xxxPortal.
Looking at the soap monitor log, we noticed consumer and producer are setting a different cookie for a same cookie name.
In weblogic.xml, consumer sets same cookieName value as the producer's. However consumer is restricting the cookie path to /xxxPortal while producer is not. Producer's cookie path is set to /.
Here's excerpt from soap monitor log capture from producer side:
Request(Fri Oct 06 18:55:57 CDT 2006):
JSESSIONID_PCSPORTAL=FmsMFD6Q7LpRQX787bzGybcXTddzrgKhGzzrjBDywj2FWBjz9kTC!-551078613!961230279; path=/
Response(Fri Oct 06 18:55:58 CDT 2006):
JSESSIONID_PCSPORTAL=FmsMFD6Q7LpRQX787bzGybcXTddzrgKhGzzrjBDywj2FWBjz9kTC!961230279!897402389; path=/
Is it possible that inconsistency in cookie being sent each time by both consumer and producer cause the authentication info to be not sent from consumer to producer? If so, what would be the best solution?
Thanks!
ymjoo.

Even when the producer and consumer use the same cookie name, the
producer-set cookie is managed by the consumer, while the consumer-set
cookie is managed by the browser.
Could you explain the deployment in more detail?
Subbu
Yul-Mee Joo wrote:
An authentication information is not being sent in soap header from Consumer to Producer during WSRP interaction. userAuthentication is also set to unknown: <urn:userAuthentication>unknown</urn:userAuthentication> .
Producer and consumer are on the same https server but they are on different domain. For example, Producer is accessed /yyyPortal while consumer is /xxxPortal.
Looking at the soap monitor log, we noticed consumer and producer are setting a different cookie for a same cookie name.
In weblogic.xml, consumer sets same cookieName value as the producer's. However consumer is restricting the cookie path to /xxxPortal while producer is not. Producer's cookie path is set to /.
Here's excerpt from soap monitor log capture from producer side:
Request(Fri Oct 06 18:55:57 CDT 2006):
JSESSIONID_PCSPORTAL=FmsMFD6Q7LpRQX787bzGybcXTddzrgKhGzzrjBDywj2FWBjz9kTC!-551078613!961230279; path=/
Response(Fri Oct 06 18:55:58 CDT 2006):
JSESSIONID_PCSPORTAL=FmsMFD6Q7LpRQX787bzGybcXTddzrgKhGzzrjBDywj2FWBjz9kTC!961230279!897402389; path=/
Is it possible that inconsistency in cookie being sent each time by both consumer and producer cause the authentication info to be not sent from consumer to producer? If so, what would be the best solution?
Thanks!
ymjoo.

Similar Messages

My whole catalogue was nearly lost due to a failed external hard drive. Professional help recovered photos but I can't find my smart tags. Is it possible they were lost on failed drive?

My whole catalogue was nearly lost due to a failed external hard drive. Professional help recovered photos but I can't find my smart tags. Is it possible they were lost on failed drive?

Hi,
In order to recover the tags/albums, etc, you need to have the catalog db. Since currently you only have images, the organization done in the older catalog is probably lost.
Which version of PSE you have and is there any chance, that you have access to catalog location (default is : %programdata%\adobe\elements organizer\catalogs on Windows and ~/library/app support/adobe/organizer/catalogs on MAC) ?
Thanks
Andaleeb

Error in Siebel Analytics ReportUI portlet Authentication error.

Hi Everyone
I am trying to Integrate Between Weblogic Portal and OBIEE.
Weblogic Portal Version: 10.3
OBIEE : 11g
Integration Using: Report UI Portlet
1.
While creating OBIEE environment "weblogic" user was setup as "Administrator" account.
Following is list of users that i see from weblogic console for OBIEE.
     User          |     Group
     weblogic     |     Administrator
     BISystemUser|     Administrators
     OracleSystemUser|     OracleSystemGroup
2.
From Portal environment, i have added "sawjsr168portlets.war" as shared library.
Changed portlet.xml and web.xml with following.
     -changes in portlet.xml
          1. oracle.bi.presentation.sawserver.URL
               http://localhost:9704/analytics/saw.dll
          2.     oracle.bi.presentation.portlets.jsr168.reportui.AdminUserName
               weblogic
          3.     oracle.bi.presentation.portlets.jsr168.reportui.AdminPwd
               xxxxxx
          4.     oracle.bi.presentation.report.Path
               /Shared Folders/Sample Lite/Published Reporting/Reports/Brand Revenue Details
     -changes in web.xml
          1.     com.siebel.analytics.web.SAWServer.Host
               localhost
          2.     com.siebel.analytics.web.SAWServer.Port
               9704
3. On Portal Desktop, I am authenticating with "weblogic" user ("weblogic" user which is configured in Portal Domain).
While doing so, I see following exception on Portal Domain.
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:sawsoap="com.siebel.analytics.web/soap/v6"> <soap:Body> <soap:Fault><faultcode>soap:Server</faultcode>
<faultstring>Authentication error. Details: An invalid User Name or Password was entered. </faultstring>
<detail><sawsoape:Error xmlns:sawsoape="com.siebel.analytics.web/soap/error/v1">
<sawsoape:Code>IAI2Z2JJ</sawsoape:Code>
<sawsoape:Message>Authentication error. Details: An invalid User Name or Password was entered. </sawsoape:Message>
<sawsoape:File>main/project/websubsystems/soapservicesimpl.cpp</sawsoape:File>
<sawsoape:Line>183</sawsoape:Line>
<sawsoape:LogSources>
     <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
     <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
     <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>IHVF6OM7</sawsoape:Code>
<sawsoape:Message>Authentication Failure.</sawsoape:Message>
<sawsoape:File>main/project/webconnect/connection.cpp</sawsoape:File>
<sawsoape:Line>387</sawsoape:Line>
<sawsoape:LogSources>
     <sawsoape:LogSource>saw.connectionPool.getConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.securitysubsystem.checkauthentication.runimpl</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
     <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
     <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
     <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
     <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
     <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>OPR4ONWY</sawsoape:Code>
<sawsoape:Message>Odbc driver returned an error (SQLDriverConnectW).</sawsoape:Message>
<sawsoape:File>main/project/webodbcaccess/odbcconnectionimpl.cpp</sawsoape:File>
<sawsoape:Line>356</sawsoape:Line>
<sawsoape:Error>
<sawsoape:Code>U9IM8TAC</sawsoape:Code>
<sawsoape:Message>State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13038] The user does not have impersonation privilege. (08004)</sawsoape:Message>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</detail>
</soap:Fault></soap:Body> </soap:Envelope>>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(exit00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <Exit: HTTPDispatchHandler::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SimpleChain> <BEA-000000> <Exit: SimpleChain::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(semanticCheck00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.handlers.soap.MustUnderstandChecker> <BEA-000000> <Doing SOAP semantic checks...>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.client.AxisClient> <BEA-000000> <Exit: AxisClient::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(toAxisFault00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.enterprise> <BEA-000000> <Mapping Exception to AxisFault
Authentication error. Details: An invalid User Name or Password was entered.
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
<Jan 3, 2011 11:05:05 AM EST> <Error> <ServletContext-/research-portal> <BEA-000000> <Error in Siebel Analytics ReportUI portlet
Authentication error. Details: An invalid User Name or Password was entered.
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers
Kindly let me know your thoughts on following.
1. Am i missing any steps?
2. Is it possible that Portal 10.3 and OBIEE 11g is not compatible?
3. Admin Username and password that i specified in Report UI portlet's preferences, is it wrong user (or user from wrong group maybe)? Do i need to specify user who is from another group?
4. I changed "SAWServer" url and port in web.xml. Is that okay?
5. Is there any way, i can get more detailed information from OBIEE Server by enabling certain kind of debug?
Let me know if any input is needed from my side. Any input is highly appreciated.
Thanks

Hi Now I am facing bellow error.
Can anybody suggest me what to do?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65PState: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 13017] User or group has not been granted the Direct Database Access privilege to access the database 'sh'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000)

Passing parameter to a portal page that display a WSRP portlet ?

I have created, deployed and regisered a WSRP portlet to Portal 10.1.4. I also create a portal page used to render this portlet. I would like to pass in a parameter xx (thru the HTTPRequest) when calling this page and have it visible to the portlet inside the page. Something like http://host:port/portal/page/portal/myPortlets/portletA?xx=123 where
"http://host:port/portal/page/portal/myPortlets/portletA" represented my portal page and "xx=123" is what I want my page to see.
Is it even possible/support by Portal 10.1.4 ?
Thanks.
Kim

HI Alejandro,
Did the same what you have told me. I am getting the following error
oracle.jbo.JboException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-29000. Error message parameters are {0=java.io.EOFException, 1=null}
at oracle.adf.model.bc4j.DCJboDataControl.setCurrentRowWithKey(DCJboDataControl.java:1554)
at oracle.adf.model.binding.DCIteratorBinding.setCurrentRowWithKey(DCIteratorBinding.java:3829)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1588)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2189)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:751)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:407)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:255)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:213)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.sun.el.parser.AstValue.invoke(AstValue.java:254)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)
Thanks

I synced my iphone too my computer and I got all my husbands info and lost all mine how can I get my info back.

I synced my iphone too my laptop and got all my husbands info and lost mine how can I get my info back off this laptop.

hi marie i take you have got your own apple registration, if not you need toregister under your own name & password, if you have then it does sound like you've just plugged it in under your husbands name. lori :-)

How to show the logged in User's displayName in a custom wsrp portlet

Hi,
I have a custom wsrp portlet added to webcenter space. Within the portlet I need to show the logged in(sso) user's displayName. I have tried using #{webCenterProfile[securityContext.userName].displayName} but its not working. Any pointers would be highly appreciated.
Regards,
Ann

You might want to post that in the [WebCenter Suite - Framework|http://forums.oracle.com/forums/forum.jspa?forumID=354] discussion board.
This area is strictly WebCenter Interaction which is a completely different product than Spaces.

What info is lost when restoring ipod touch to factory settings? games?

what info is lost when restoring ipod tocuh to factory settings? games?

Philly_Phan wrote:
What do YOU think that "factory settings" means?
Not quite, because you can still redownload all your purchased apps and music. And everything that is synced from applications on your computer such as your calendar and your contacts can be resynced.

How to restore the original default ip5 ringtones lost due to upgrade to ios 7.0

Is there a solution to restore the original default iPhone 5 ringtones lost due to upgrade to IOS 7.0?

If I upgrade to iOS 8.0.2, my iPhone will not work.
Why do you believe that?

Trouble with WSRP portlets

Problem: at one moment all deployed WSRP portlets was crushes.
The following error shows in portlet window: Error: Could not get markup. The cookie or session is invalid or there is a runtime exception
Remote debugging shows, what portlets really works, but Portal server can't get markup after portlet was executed.
And similar following exceptions I has found in portal's application.log:
06/06/20 15:16:44 portal: DEBUG: active=26 id=91794728298,1 Content Fetcher Caught Dispatcher Exception :
oracle.webdb.utils.PortalExceptionImpl: An error occurred whilst invoking an operation on the Provider
     at oracle.portal.PortalException.<init>(Unknown Source)
     at oracle.webdb.dispatcher.DispatcherException.<init>(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPDispatcherException.<init>(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPRenderDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPCacheDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPMainDispatcher.dispatch(Unknown Source)
     at oracle.webdb.page.ContentFetcher.run(Unknown Source)
Caused by: java.rmi.RemoteException: Runtime exception; nested exception is:
     XML parsing error: com.sun.xml.rpc.sp.ParseException:1: Document root element is missing
     at com.sun.xml.rpc.client.StreamingSender._handleRuntimeExceptionInSend(StreamingSender.java:269)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:251)
     at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Stub.getMarkup(WSRP_v1_Markup_PortType_Stub.java:205)
     ... 5 more
Caused by: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: Document root element is missing
     at com.sun.xml.rpc.streaming.XMLReaderImpl.next(XMLReaderImpl.java:110)
     at com.sun.xml.rpc.streaming.XMLReaderBase.nextContent(XMLReaderBase.java:23)
     at com.sun.xml.rpc.streaming.XMLReaderBase.nextElementContent(XMLReaderBase.java:41)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:116)
     ... 6 more
caused by: java.rmi.RemoteException: Runtime exception; nested exception is:
     XML parsing error: com.sun.xml.rpc.sp.ParseException:1: Document root element is missing
     at com.sun.xml.rpc.client.StreamingSender._handleRuntimeExceptionInSend(StreamingSender.java:269)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:251)
     at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Stub.getMarkup(WSRP_v1_Markup_PortType_Stub.java:205)
     at oracle.webdb.wsrp.client.run.WSRPRenderDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPCacheDispatcher.dispatch(Unknown Source)
     at oracle.webdb.wsrp.client.run.WSRPMainDispatcher.dispatch(Unknown Source)
     at oracle.webdb.page.ContentFetcher.run(Unknown Source)
Caused by: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: Document root element is missing
     at com.sun.xml.rpc.streaming.XMLReaderImpl.next(XMLReaderImpl.java:110)
     at com.sun.xml.rpc.streaming.XMLReaderBase.nextContent(XMLReaderBase.java:23)
     at com.sun.xml.rpc.streaming.XMLReaderBase.nextElementContent(XMLReaderBase.java:41)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:116)
     ... 6 more
Need help to solve this problem.
P.S. Sorry for bad english.
Message was edited by:
Yarrow

Oracle Portal version 10.1.4

Handling large files in scope of WSRP portlets

Hi there,
just wanted to ask if there are any best practices in respect to handling large file upload/download when using WSRP portlets (apart from by-passing WebCenter all-together for these use-cases, that is). We continue to get OutOfMemoryErrors and TimeoutExceptions as soon as the file being transfered becomes larger than a few hundred megabytes. The portlet is happily streaming the file as part of its javax.portlet.ResourceServingPortlet.serveResource(ResourceRequest, ResourceResponse) implementation, so the problem must somehow lie within WebCenter itself.
Thanks in advance,
Chris

Hi Yash,
Check this blogs for the strcuture you are mentioning:
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
Regards,
---Satish

Handle HttpRequest and Responce in WSRP Portlets

Hi all,
I have deployed a fusion ADF application as a WSRP portlet on webcenter portal.
In my portlet application code i want to perform some file handling operations(like open a file in browser) using ADF table components.
I had used Http sevlet request and responce but portlet throws a following exception.
java.lang.ClassCastException: org.apache.myfaces.trinidadinternal.config.dispatch.DispatchResourceResponse cannot be cast to javax.servlet.http.HttpServletResponse
Any one has some idea about how to handle http request and responce in WSRP portlets.

Hi
Portlets don't use HttpServletRequest & HttpServletResponse.
Use instead of them: PortletRequest & PortletResponse
Regards.

WSRP Portlet open new window

Hello allm
I have three wsrp portlets on a page, (Applications navigator, favourites, worklist) and when I click them I get the correct link so they work just fine. MY problem is, clicking any link in a portlet will open that link in the current window, thus loosing the portlet window. Does anyone know how I can force this to open in a new window? It sounds like a simple task but have not been able to find that conig setting just yet..
Thanks in advance.
Grummy

For anyone else that stumbles upon this issue, the resolution is as follows:
Edit the region where the portlet resides
go to Attributes
move 'Link - Display Name' to the 'Displayed Attributes'
Back on the main edit page, click actions on the portlet, edit portlet, and then select display as Link That Displays Portlet In New Browser Window, done.

Wsrp portlet discovery

Hello!
I have just installed websynergy-gfv2-linux and started playing with it. I am interested in the WSRP support of the product. Right now, I am trying to do a simple test: I want to use the WSRP portlet discovery mechanism to search for a portlet in a UDDI registry, and then start a WSRP consumer that consumes that remote portlet. The question is: is this operation supported through the admin interface of websynergy? I ask because when I get to the WSRP Consumer Admin interface, I get only the oprion to specify the URL of the producer to which the consumer must connect.
Thanks,
Florin.

Registry support i.e both publishing and discovering is not there in websynergy. There is no plan right now to support it, older portal version esp 6.x had ebxml registry support but this was later dropped.
However if registry server provides users the option to publish and discover artifacts, you can use it. Its just like publishing and discovering any other artifact on a registry server.

Can I expose Oracle Reports as a WSRP Portlet

We need to make reports created in Oracle Reports available to other portals, can this be done by exposing the reports as WSRP portlets, if not is there any other way to do this?

I'm trying to determine the best architecture for a (sometimes) disconnected java application. We want to create a java swing application (deployed using java web start) which will enable users to enter data while being disconnected from the network. When they connect, the application should upload all the entered data to a database.
We would like to use bc4j to implement client side business logic (deploy the bc4j classes with the swing user interface through java web start). For this to work, i think we would also have to deploy a small database which bc4j uses untill we have a network connection.

WSRP Portlet deployment

I have a simple WSRP portlet, which I developed in JDev as an ADF app using a Business Object bound to an ADF Form, via JDBC to a remote Oracle 11g database, and portletized using the Portlet Bridge/Wizard.
Everything works fin locally on the Integrated WL server, but when I deploy it to my Weblogic Managed Server, it tries to run, but just hangs perpetually at the twirling O initialization progress indicator.
I've isolated the problem to being related somehow to the database connection, by creating an identical app with the same adf form elements, sans the database binding, and it works fine.
I've double checked that the jdbc connection, which I have depolyed to the same wls target that I'm deploying the portlet to, works and is using the same driver, and that the jndi names match, but am at a loss now as to where else to look to find this apparent disconnect.
Would love to hear from anyone that may have experienced this and found the cause, or anyone who might have any suggestions as to further troubleshooting steps I could take.
Thanks!
Edited by: ray.mccormick on Mar 16, 2012 11:25 AM

Found the solution on Metalink (Note 437789.1) by editing the existing v1 wsdl and creating a dummy one in my deployment file.

WSRP portlet - authentication info possibly lost due to cookie

Similar Messages

Maybe you are looking for