WSX Login Cred. Not Working In Win. 7
Hello,
I have workstation 10 on a windows 7 machine which runs serveral VM's very well. I moved one of them over to the shared VM section and installed WSX server on the same machine to try it out. The install went fine and i can connect to the WSX server on the same machine and any other machine on the network but the windows login credentials do not work. I have two admin accounts and neither of the logins work.....however, when i make a brand new admin account and try to login into WSX it works fine. As soon as the machine restarts though that same login stops working. I have no idea what is going on, you guys have any ideas?
Thanks,
Brandon
I have the same issue. I attempted the resolution by BlazerGT with no success. I have found the issue to be persistent with both domain and local accounts. For local accounts simply deleting the account and re-adding it was a workable solution but I have not found one with the domain accounts. If there is a log for failed authentication I would love for a developer to let me know where this is as it would be greatly helpful to be able to diagnose.
Similar Messages
-
I got adobe audition 1.5 it is not working in win 7, what i need to do
i got adobe audition 1.5 it is not working in win 7 what i need to do
Do you receive an error when opening the application? Any error messages while trying to install?
-
CC desktop app not working on Win 8.1
Creative cloud desktop app not working in win 8.1. The window is blank, only the header is visible. I've tried reinstall and shut down ESET firewall, but nothing is working. I use the same plan in work on win 7 and it's ok. Please help, maybe some Win 8.1 update? An by the way, when I update my CC app, everything on my desktop disappear and I must reboot system to fix it, this is not normal as well...
Thanks for answer
RadekI've found the answer...sorry for questionig it again :-)
-
Login page not working in EBS R12 after autoconfig.
Hi,
We are using EBS R12 on windows 2003 server 32 on a test machine. As we were making some changes using autoconfig,
as the Login page not working in EBS R12 after running autoconfig.
Kindly help us.
Thanks in advance.Hi,
Rollback the changes and run AutoConfig, see if you get the same error or not then -- See (Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12) for details "2.5. Rolling Back an AutoConfig Session".
Regards,
Hussein -
Norton Login is not working with the upgrade from firefox. Not too happy about this
I upgraded to the new firefox. I have a lap top with vista windows.
Norton Login does not work with this version. Can you please explain to me how to fix this problem. Much preferred the last version of firefox.You need an update from Norton, which Norton says will be ready in May.
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
You can get 3.6.16 from here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html -
AVAppGetActiveDoc not work in win 7
It's a plug-in code use AVAppGetActiveDoc(under acrobat sdk 5),It work fine in win XP(acrobat 7,8,9), but is not work in win 7, acrobat 9,is any suggestion?
Maybe using the SDK 9.
Regards,
Joe -
Sopund Blaster 5.1 VX Not working with Win 7
I have a SB 5. VX not working with Windows 7 , Please reply any comlete solution.
Re: Sopund Blaster 5. VX Not working with Win 7Not sure if you are using the driver available from the support site for Win 7 but if not, you can get it here.
-
Preview/Publish Not Working in Win 7
I am creating simple non scoring quizzes in Captivate. When i go to publish or preview the screens never create. I am on a new computer with Win 7 64 bit OS. I still have my old computer and if i take the project file and publish there it does create. I am trying to finish setting up the new computer and this is a hurdle. any Ideas?
captivate 4. I am running it as an admin.
Leonard D'Arcy
Dean Foods
Business Analyst III
IT DMS Education Group
LMS Administrator
Lilybiri <[email protected]>
09/16/2010 02:38 PM
Please respond to
[email protected]
To
Marlon D'Arcy <[email protected]>
cc
Subject
Preview/Publish Not Working in Win 7
Hello and welcome to the forum,
About which version of Captivate you are talking? Did you run Captivate as
administrator? If you are still using Captivate 4 there are issues with
Win7 64-bit, and several threads in this forum. But first tell which
version you are using.
Lilybiri -
TS1363 ipod classic not working with win xp not sure how to sync it?
ipod classic not working with win xp not sure how to sync it?
Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518 -
Amd video drivers not working after win 10 upgrade
AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.
Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.
-
Fingerprin​t Reader does not work under Win 7
I have a T500 which I have just upgraded from Windows Vista Business to Windows 7 Professional.
Everything apart from the Fingerprint Reader and the Wireless Broadband seems to work.
The Fingerprint Reader is the Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.
If I run the Lenovo Fingerprint software version 3.3.0.58 I get the error that the software cannot
communicate with the sensor.
The Wireless Broadband card is the Ericsson F3507g. The follwing drivers are installed:
Network adapters:
- F3507g Mobile Broadband Driver, version: 1.0.0.52 dated 29/07/2009
Ports (COM & LPT):
- Ericsson F3507g Mobile Broadband Minicard GPS Port (COM6), version: 1.0.0.28 dated 29/09/2008
- Ericsson F3507g Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated 26/06/2009
Smart card readers:
- F3507g Mobile Broadband USIM Port, version 6.0.0.7 dated 12/05/2009
Even if there is the driver information indicated above the USIM device says:
"No drivers installed for this device."
Universal Serial Bus controllers:
- F3507g Mobile Broadband Device, version: 4.54.7103.1 dated 26/06/2009
If I use the ThinkVantage Access Connections software I get the following error message:
"The current wireless WAN connection is being managed by another client utility.
Close the client utility and try again." But to my knowledge no other Wireless Broadband client is running.
If I try Mobile Broadband Connect via the Vodaphone UK interface I get the following error message:
"No Wireless Mobile Broadband device found."
And finally if I try ThinkVantage GPS I get the folowing message:
"The GPS NMEA CPM port is not available. You need to check the following things.
- Another GPS application is using the COM port.
- COM port is disabled. You can enable the COM port in Device Manager."
Under Windows Vista both the Fingerprint Reader and the Wireless Broadband device worked without
any problems. Do anybody have any ideas on how I can resolve these two problems.
Best regards,
Frode
Solved!
Go to Solution.Yes, it is the driver that seems to be the problem. Here is how I proceeded. Before I started to removed the Lenovo software and the driver I first made sure the the automatic driver installation was turned off. The easiest way to do this is to type "change device installation settings" in the Start Menu search box. A window then pops up with the question: "Do you want Windows to download driver software and realistic icons for your devices?". By default this is usually set at "Yes, do this automatically". Instead select the option "No, let me choose what to do", which will bring up another menu where one select the last option: "Never install driver software from Windows Update."
After you have installed the new driver do not forget to put it back to the recommended automatic mode.
I first went to Control Panel - Uninstall Programs and uninstalled the Lenovo Fingerprint Software. I then went to the Device Manager and uninstalled the AuthenTec driver version 2.0.0.18 and checked the box delete this driver software. I then rebooted the PC and during pre-boot went into the BIOS, selected Security and Fingerprint Reader and made a reset on the reader. After reboot I reinstalled the Lenovo Fingerprint Software 3.3.0.58 (7wf160ww). This time the installation went through without any error messages but when I started the software I discovered that it still did not work. When trying to run the tutorial or to enroll fingerprints I got the old error message: "Cannot communicate with sensor. Please confirm the sensor is ready."
I then checked the driver and I found that I now had the older AuthenTec driver version 8.1.2.56 dated 07/07/2009 and everything looked OK from the driver point of view. I then suddenly remembered that I had forgot to uninstall the AuthenTec TrueSuite software. I immediately uninstalled the TrueSuite software and also yet again the Lenovo Fingerprint Software, but left the newly installed driver in place. After a reboot I again reinstalled the Lenovo Fingerprint software and this time it worked. I can now run the tutorial and enroll fingerprints and the fingerprints work 100% for the Windows login. I have not yet tried to install Lenovo Client Security. I will do that later. However, I have discovered that the AuthenTec TrueSuite software has not been reinstalled after doing the last Lenovo Fingerprint software reinstallation. I am not sure if this is a good or a bad sign. Perhaps Bananaman or Cleo_Lenovo can give me some feedback on this issue.
I thank you all for helping me out with this problem. I find the Lenovo Forums of great interest and usefulness.
Cheers,
Frode -
Tecra M10-10z - 3G does not work after Win 7 installation
Tecra M10-10z I have installed Windows 7 pro 64bit
Everything is configured correctly, but connection 3G does not work: the message is " no network"
with Windows XP is ok.
I did not find firmware updates or similar.
Is there someone who can help me?
tksHi
In order to use the 3G you should firstly check if the 3G ericsson module was properly installed.
In case there is an yellow exclamation mark visible in the device manager, the 3G driver should be reinstalled.
I found on the Toshiba EU driver page:
[Ericsson 3G Win 7 driver|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=295&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=295&page=1&ID=71930&OSID =-1&driverLanguage=42]
Furthermore ensure that the 3G RF Power Control Utility has been installed properly.
The 3G RF Power Control Utility" activates your 3G on startup.
This tool can be found here:
[3G RF Power Control Utility for Win 7 64bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=322&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=322&page=1&ID=73658&OSID =-1&driverLanguage=42]
Hope the 3G network would functions after the reinstallation of both tools. -
Print Spooler does not work after Win 8.1 install
I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems. -
Speakers on monitor do not work with Win 8.1
Yesterday I upgraded from Win X - SP 3 (discontinued by Microsoft) to Win 8.1. I spent the entire day with a Microsoft technition on-line to figure out how all this works. One thing he could not get to work was the speakers on my monitor (HP vs 19c). He took over control of my computer to work out the various issues. I know he went to Realtec to try to find a driver for the speakers but without luck. The speakers worked before, why don't they work with Win 8.1. The monitor works fine. Unfortunately without sound I cannot go through the tutorials to learn more about how to use Win 8.1.
This question was solved.
View Solution.Thank you so very much. I installed the driver for Win 8.1 but that apparently was not the problem. Please forgive me for being so dense. On control panel I kept seeing the problem as not having the speakers plugged in. The other day I unplugged to wire going to the computer and re-plugged it, but that did not work. This morning I unplugged the speaker wire from both ends - the computer as well as the monitor and replugged it. Surprise, I now have audio!!
What a relief as now I can go through the tutorials and learn how Win 8.1 works though I have already learned a lot by hit or miss. -
Win 7 32 bit allows installation of Adobe flash player 11.9, but web sites do not recognize it as being installed. Browser is IE 10. I have another computer with Win 7, IE 10, and Flash player 11.8.800.175 and it works fine. Internet connection on computer on which it works is wireless, on computer which 11.9 does not work on is wired by DSL. MCaffee antivirus on both systems, same updates; system mechanic detects no disk errors. What to do?
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)
(Released 9/13/2013) Flash Player 11.8.800.174 (Win IE only) (50 MB)
(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)
(Released 9/10/2013) Flash Player 11.7.700.242 (140.32 MB)
(Released 9/10/2013) Flash Player 11.2.202.310 (32 MB)
(Released 7/9/2013) Flash Player 11.8.800.94 (159.9 MB)
(Released 7/9/2013) Flash Player 11.7.700.232 (143.6 MB)
(Released 7/9/2013) Flash Player 11.2.202.297 (32.8 MB)
Just in case you need something older
Maybe you are looking for
-
I was using a muticolumn listbox(not table,for table i have example code,and problem is that i was not getting active cell position for Multi column listbox) with 5 columns.In third column,i want to generate a ring control,generate in the sense,whene
-
Dynamic Columns in Excel Template
Hi I have a requirement to have dynamic columns. The number of columns are not fixed. Please let me know if this is feasible. Thanks Arun
-
How can i use again IOS 6 ?? My phone its doenst work ....
How can i use again IOS 6 ?? My phone its doenst work ....
-
I've searched for this problem but none had answers. I came back to my computer after a minute and it had a message on the screen that said something to the effect of "system quit unexpectedly. Hold down the power button to restart". It said it in 3
-
please make stretched official instagram application for ipad -also whatsapp application for ipad we didn't buy ipad with cellular data for browsing only