WTA: How to use output type with medium T (Task)

Dear Gurus,
Can anyone shed some light how to use output medium T?
I tried one but at the end the output analysis says: Task T 50000125 is not available for object category BUS2032
My task clearly calling BUS2032 with method DELETEBILLINGBLOCK
Anyone can advise?
Please don't focus on the DELETEBILLINGBLOCK and suggest me workaround how to remove billing block.
It just my sample as I just anyhow select random method.
What I need to know is how to use medium T.
Thanks in advance.

Hello Erwin,
I know this is an incredibly old post, but I am wondering if you found a resolution to this issue. I have the same issue and cannot determine why I can see the enter in NAST for an output resulting from a condition record set as medium 9 with timing of 3. If I am in display mode of the sales order I can see it and also see the record in NAST. Like you, if I change the medium to Print, it proposes as expected in VA01, VA02, VA03. If I have the medium of 9, and change the timing to 4, my workflow process executes as expected.
Please let me know if you have any thoughts on how to resolve.
Thanks!
Jan

Similar Messages

How to use output type in Outbound IDOC

Hi All,
I have a requirement where I have to trigger the outbound idoc by using output type 'ZCON'.How to program this or any idea how do i acheive this......................
Please help.
Thanks in Advance
Shanaya

Shanaya,
You will have to take help of functional guys so that they can configure mentioned output type in NACE.
Apart from that you might have to do some coding as well with condition like
IF nast-kschl EQ 'ZCON' AND nast-nacha EQ '6'.
Please check NAST table for more details and let us know if you still need some help.
Cheers
VJ

How to use Object types with inheritance in design editor

Does anyone know how to implement Oracle object sub types in Design editor.
Is there a way of using the Database design transformer to convert entities to Object types rather than tables?
Thanks in anticipation
David

What database and connection type are you using? Are you connecting the report directly to the database, or trying to assign the datasource to object data?
It sounds like you might be trying to use a linked list, collection or other C# construct to pass your data in. This currently isn't supported by the Crystal Reports SDK. You can use a DataSet or a DataTable, and possibly also an IDataReader depending on which version of Crystal Reports you're referencing in your project. Of course you can also connect directly to the database, even if the database isn't on the same machine as the application.
The way to show master records with detail information is through the use of subreports and linked subreport parameters. Linked subreports take their parameter value from a record in the main report, so that only the data appropriate to that master record is displayed. The guys over in the [report design|SAP Crystal Reports; forum can help you out with this if you have questions on the specifics.

Ouput type with medium '9' not determined automatically

Hi,
I have the following problem.
At the site I'm currently working I have to trigger a workflow from the output fro sales orders.
So I have set up the output type with medium '9' ('Events- SAP Business Workflow').
In the condition maintenance ( VV12 ) I have added the object type as well as the event that is linked with the object type and triggers the workflow.
I have tested the workflow and it works fine. ( bpth trigger as well as the functionality ).
The problem however is that the output type is not determined automatically any longer in the transaction to create / change sales orders ( VA01/VA02 ). In the determination log I see the message that the object type send to output determination is empty ( while in VV12 I filled it in (=VBAP)! ) and therefor the system is not able to check that the event is correct ( he shows the correct event though ! ).
When I manually enter the output type, he accepts it but does not copy automatically the event ( he fills in the object type VBAP though ! ) in the communication window. When I enter the event manually, he accpets this again and everything works fine.
So the major question that I have is why doesn't he default this automatically ( object type and event ).
Can somebody help me out here ?
When I use medium '1' (print) in the condition record, the automatical determination works fine.
So it definatelly has something to do with the fact that I enter medium '9' in my condition record.
Thanks in advance.
Erwin

Hello Erwin,
I know this is an incredibly old post, but I am wondering if you found a resolution to this issue. I have the same issue and cannot determine why I can see the enter in NAST for an output resulting from a condition record set as medium 9 with timing of 3. If I am in display mode of the sales order I can see it and also see the record in NAST. Like you, if I change the medium to Print, it proposes as expected in VA01, VA02, VA03. If I have the medium of 9, and change the timing to 4, my workflow process executes as expected.
Please let me know if you have any thoughts on how to resolve.
Thanks!
Jan

Dumps while using output types

Hi,
We are to create a PO by giving a output type ZPO2 in the sales order. For this we have configured in NACE the ZPO2 output type with medium as 8 (special function). In NACE we have given the Z program name and the form name (Perform in the Z program).
Now when we give the output type in the sales order and then while debugging we find that the Z program and the form given in NACE is called.
But however when we check the sales order again in TCode VA02 there is a popup mentioning that the update was terminated. In ST22 there are 2 dumps.
1) One with the error DYNPRO_SEND_IN_BACKGROUND and the description in the dump is
The current ABAP program "RSNAST00" had to be terminated because one of the statements could not be executed.
The termination occurred in line 910 of the source code of the (Include) program "RSNAST00"
2) The other dump mentions Too many parameters specified with PERFORM.
In a subroutine call, there were more parameters than in the routine definition.
Error in ABAP application program.
The current ABAP program "RSNAST00" had to be terminated because one of the statements could not be executed.
The termination occurred in line 910 of the source code of the (Include) program "RSNAST00"
In both the cases the termination occurs on:
NAST = TEMP_NAST
Please help me understand what is wrong and how can it be rectified.
Thanks
Mick

Hi Mick James,
About First Error..
Check out there is an Enhancement Point there in program RSNAST00
ENHANCEMENT-POINT OBJEKT_SPERREN SPOTS ES_RSNAST00 STATIC
Check the code in this Enhancement Point...
You must be executing some objects or FMs etc which can not be run in Background because it require SAP GUI
And another You must be passing more parameters in Subroutine while calling it ... Check out the defination of Subroutine and number of parameters you are passing...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

How to use Output Transmission Medium 8 (Special Function)

Hi All,
May I get how to use output transmission medium 8(Special Function) in Output Determination.

Hi,
   configure output type with transmission medium 8
    in nace transaction and assign it to driver program
    and so that entry exist in table tnapr and use
   RSNAST00 program to send output as email.
Before you have create entry in va02->header-output->
with processsing status 0 .
Regards
amole

How to use INVOKE function with INT parameter types

Can you tell me how to use invoke function with int parameter type ?

Pass the int as an Integer.

Mail with PO doc and link document iwhile using output type 7 - Urgent

Hi all,
I'm facing a problem for my customer.
I need to send a mail with the PO forms and all link document of each item .
This mail have to be send to several user maintain with transaction MN05 and user want to change the recipient of the mail in MESSAGE Screen of PO so we try to use output type 7 which allow this modification .
Unfortunatly, with this output type i can't add by abap code document in the mail .
Does somebody face the same problem or add a solution to retrieve all recipient define by the user ?
Best regards.

Requirement Cancel

How to use crystal report with php

Hello every body
can any body know how to use crystal report with php any helping material, code or tutorial for my problem ill be very thankful for helping me
farooq

Hello sir
i am sudeep and i need to deploy crstal reports in php
i want to integrate it in sugar crm (open source project(
can u plz tell me how to do it
i have written this code
<?php
//echo phpinfo();exit;
$ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
$crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
//$crapp = new COM("CrystalRuntime.Application.10");
$reportToRun="C:\Report4.rpt";
$creport = $crapp->OpenReport($reportToRun, 1);
//reportToRun=full path to *.rpt file
$creport->Database->Tables->
Item(1)->ConnectionProperties['User ID'] = $user;
$creport->Database->Tables->
Item(1)->ConnectionProperties['Password'] = $pass;
//fomatType = integer 22=xls, 31=pdf etc
$creport->ExportOptions->FormatType = $formatType;
//type 1 is to output to a file I think 2 is email
$creport->ExportOptions->DestinationType = 1;
//location = full path to report output file
$creport->ExportOptions->DiskFileName = $location;
$creport->DiscardSavedData();
$creport->Export(False);
?>
thanks in advance

Trigger Workflow using Output types

Hi,
How can we trigger a workflow using Output types ?
We have a Z-output type configured through NACE, which will be generated on shipment document creation, and then we should trigger our Z- workflow.
Please let me know how to achieve this fuctionality....
With Regards,
Arun.

Solved....
Reference:
http://help.sap.com/saphelp_nw70/helpdata/en/c5/e4af23453d11d189430000e829fbbd/content.htm

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

WE03 Output type with print version '3' (Collective Slip)

I am using output type WE03 with combination of print version 3 (Collective Slip) to print GR slips.
My requirement is to print all the line items on single page (unless there is no room) .
However with this output type one line item is printed per page.
Does anyone manage to print items continously on the page without page break?
Is there any other output type/print version for that?
Well, the last option will be to change the print program and sapscript, but I am trying to avoid that...

Created new print program and replaced sapscript with smartform

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

Assigned the output type with AR also,It is printing in ENGLISH Only.

Hi,
I have written a Z Smartforms and Z print program.
I have used ZRV56TD00(Copied from standard program RV56TD00),Inside it I have submitted the program(Z print Program) for the shipment number for the transaction code VT03N.
It is now printing the form in english well and good.
Now I want the same to work for the ARABIC.
I had done the arabic translation in SE63 and If I run the program It is printing only in English.
When the assigned the output type with AR also,It is printing in ENGLISH Only.
Suitable answers will be rewarded.
Regards
Manohar S
Edited by: Manoj on Jun 17, 2008 4:13 PM
Edited by: Manoj on Jun 17, 2008 4:14 PM
Edited by: Manoj on Jun 17, 2008 4:15 PM

Hi Manoj,
Goto transaction NACE and check wether you have mentioned the language in Mail title and texts for the particular message type.
let me know if you require in more detail.
Regards,
Sharath

WTA: How to use output type with medium T (Task)

Similar Messages

Maybe you are looking for