Wvc54gc cannot change it to the proper subnet...

I have had a wvc54gc for some time but it does not work on our subnet. If I change a computer to the 192.168.1 subnet I can access the camera using both the camera monitoring software and the web interface. However, using the camera monitoring software I try to change the camera settings to the proper subnet IP address and nothing happens. I type using no user and password or I try the default of admin. In both cases the software says successfully saved but nothing changes. If I try to use the web interface using the settings tab it does not accept the default user and password of admin. I have reset the camera several times so I know it is at the factory defaults.

Try doing a Soft Reset:
Use a paper clip and hold the reset button IN for 30 secs or so and then release the RESET button and disconnect the power cable from the camera.....wait for 60 secs or so and then try logging into the camera set up page using Username - blank / admin....Password - admin....
Or you may even try doing a Hard Reset:
Use a paper clio and start holding the reset button IN....after initial 20 secs disconnect the power cable from the camera and keep holding In the reset button....then again after 20 more secs re-connect the power cable back in to the camera and continue holding IN the reset button....again after 20 more secs finally release the reset Button....disconnect the power cable from the camera....wait for 60 secs or so and then try logging into the camera set up page using Username - blank / admin....Password - admin....
With the procedure of HARD RESET....you are actually holding in the RESET button IN for 60 secs if i am correct...
Keep posting....

Similar Messages

My calendar date is not automatically changing, what's the proper setting?

My calendar date is not automatically changing, what's the proper setting?

If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.

Cannot change and display the file in document CV02N

Hi All,
When i create a document in CV01N transaction ,upload a word file ,
save and change the status, for some reason the uploaded word document file goes in unchecked (unlocked ) mode.
and this doesn't happen daily, its one of those situations when user does something funny.
Later when the Approver wants to approve the document in CV02N he cannot open the file because (of error "cannot be accessed") its not uploaded properly in content server and cannot change status to Reject because of error "Status can only be set when all originals are stored".
Please can anyone help me to find out what might be the problem for these kind of scenarios and how do i deal a document in a status where the the uploaded file is in unlocked status.
NOTE: Around 2500 users using the present process and i get only 2 to 5 scenarios like the above once in a while . so looking for a permanent fix for this problem.
Thanks in Advance
Sud
Edited by: Sud on Jul 22, 2011 12:36 PM

Dear Sud,
I think we should focus here on the reason for the error message (26 172) and therefore I would recommend you to see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26172-Reasonforthiserror
Best regards,
Christoph

So I created my Apple ID when I was 12 and used a fake email, now that I have a real email I can't remember the answered to my Apple ID therefore I cannot change it to my proper email. How do I change my email because?

HHow do I change the email to my apple id when I don't remember security questions and its a fake email?

Which email address are you trying to change ?
You won't be able to change the rescue email address until you can answer your security questions, if you can't remember your answers and gave a fake email address for it then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form to contact Support : https://www.apple.com/emea/support/itunes/contact.html
When they've been reset you can then change your rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID
If it's the primary email address that you are trying to change : Change your Apple ID - Apple Support

Sales Order Material Determination Cannot Change Quantity of the Sub-item

Hi SAP Guru's,
Has anyone encountered this scenario?
1. Created a standard order with an item as material substitution
2. Created a pro-forma invoice referencing the sales order created
3. Went into VA02 to change the item quantity of the higher level item in the material substitution
Expectation is that once you change the quantity of the higher level item, the quantity of the sub-item should also reflect whatever is in the quantity of the higher level item.
Actual Result is that only the higher level item quantity is changed, the sub item quantity remained the same.
Is there any configuration or copy control that we can check regarding this?

Hi Maurice,
Apologies! The qty of the sub item should change when you change it in VA02 even after proforma is created.
Could you pls check the item categories TAX and TAPS config i.e. the material entered should get item category TAX and the sub item should have TAPS or the item categories should have same configuration as TAX and TAPS.
Please check.
Regards,
Raghu.

I cannot validate the serial number and I tried several things like shut down firewall, change hosts (cannot change it by the way the computer won't let me), etc.

I cannot validate the serial number on premiere elements and photoshop elements. Stil saying that i do not have any connection with the internet. I already tried to contact the adobe chat. They did help me, but what they say did not work.
They said that I had to contact helpdeks, but they would not help me. I had to go to the chat again. The chat does not work.
I also tried al of the things that is mentioned on this site https://helpx.adobe.com/nl/x-productkb/policy-pricing/activation-deactivation-products.htm l.
Can someone help me, because I don't know what to do know.

Celina
Did you purchase Premiere Elements 13 from Adobe direct? If so, you can get your money back within 30 days of purchase.
I can post an Adobe Chat Orders link for that if necessary.
Did Adobe Chat or any of its representatives offer to do a remote control of computer troubleshooting to get to the core of your
problem? We in this user to user forum cannot do that, Adobe Chat might. But, again, we are not Adobe.
Do you have a computer shop or an associate with computer software knowledge who can assist you on this matter?
Excuse the question, but I do not want to take anything for granted. Are you sure that you have the right serial number and are
entering it correctly
xxxx-xxxx-xxxx-xxxx-xxxx-xxx
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Just to summarize...
a. In the hosts file....you saw nothing but the default entries
b. You download and installed the Adobe Application Manager and that did not solve the problem
c. You renamed the SLCache and SLStore Folders and that did not help
But, can you disable the antivirus and firewall(s) to see if resolves the issue in anyway?
What antivirus program does your computer use?
ATR

CANNOT change Icons in the dock or other places like I used to in 10.5.8

I found a nice set of icons that I would like to set to my MBP that I recently upgraded to Snow Leopard. So far I really haven't had any real problems that I wasn't able to work through except for this one. I've even opened up the "Info" box and changed the sharing and the permissions and changed them so that as an administrator I could change the icon but no luck! On my G5 tower I have no problem at all using the standard procedure but when I apply it to my laptop it just doesn't want to work. I'd appreciate any suggestions.
Thanks

I've been playing around with that problem for a bit now: Apple changed it with Leopard and Snow Leopard and it's not as easy as it was with Tiger... but I found a way around it:
When you control click on any of your folders (to the right of the System Prefs icon), you need to have the following checked:
Sort by: Name
Display as: Folder
View content as: List
Having changed icons dozens of times, I found that any other setting will keep your pretty icon within a Finder window, but as soon as move it to the Dock, it'll revert to the stock view.
So, once you choose above settings, go ahead and change an icon on one of your folders and then drag it into the dock. It should work - mine have been there for 2 weeks now.

I have an apple ID, but for some reason my phone has saved my previous Apple ID. I cannot change or add the old email address because the address no longer exists and I don't have access to the mailbox. Therefore, when I try to delete my iCloud account fr

x

If you can't remember the password for the ID, and no longer have access to the email account associated with the ID to reset it, try contacting iTunes Store support: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID password issues.

How can I reset preferences on my desktop file arrangement? I cannot change it using the prescribed way.

I am running OS 10.5.8. Recntly I have been unable to set the arrange preferences on my desktop icons to anyhting but by "name". I can select the other options but it always returns arranged alphabetically by name.

If you have the B&W G3 mini-tower, it has an ATAPI interface for the optical drive on the motherboard. If someone has installed a SCSI CD-ROM drive in it, it would have to be connected to a SCSI controller PCI card. If you don't mind investing about $30-$35 in the computer, replace the CD-ROM drive with an ATAPI Pioneer DVD±RW drive in the optical drive bay. Because it isn't Mac-specific, it can be purchased anywhere - including PC stores. I recommend a Pioneer drive because it tends to be more compatible with Macs, in terms of booting to the "C" key at startup. Set the jumper on the back of the drive to Master (factory default is typically Cable Select). The B&W G3 doesn't support the Startup Manager feature, so the Option key doesn't function for that purpose. Additionally, the B&W G3s don't support FireWire booting. If you have an alternate (supported) bootable source, it's best to use the 4-key combination at startup: Command + Option + Shift + Delete to select it. The CD versions of Tiger look the same as the DVDs (black disk with silver X across it) and aren't grey restore disks. The CD versions of Tiger are more scarce, so the price for them is quite high. The same has become true for the Tiger universal installer DVD.

I accidently erased all content on my ipad, now the only thing that comes on the screen is a language portal and it is some foreign language, cannot change it??

I accidently erased all content on my ipad, (which my son had set up for me) now the only thing that is on the screen is a language portal, and some language I do not understand. I cannot change anything on the screen, HELP???

Slide to unlock then follow the process until you find back from itunes or icloud.

Cannot change anything in user account and family safety, even logging as an administrator account.

My 1st user account was an administrator account, 2nd user account was a standard account. 3rd user account was a guest account of window 8 single language, however i accidentally made a mistake by setting guest account from standard account to become an
administrator account. I also set down the 1st user account from administrator to standard account and after these stupid settings, the guest account becomes administrator account anyone can access in without any password, the 1st and 2nd accounts become standard
accounts! Before this mistake, the 1st user account was the main account of mine, 2nd and 3rd (guest account) were logged in very rarely.
The problem is when i logged in guest account as administrator, i cannot set the 1st or 2nd back to become another administrator account. Something has gone strange, it has been prevented me to set the others to be administrator and the guest back to standard
account. Being as an administrator account, the guest account was totally useless in changing settings. When i logged in with 1st and 2nd account, i also cannot change anything in the user account settings (change type of user account) and family safety, all
attempts to change the user account settings was useless such as i never tried. I also tried "refresh your computer without losing files" but not worked. Please provide me some advices!
I did not find the forum for win 8 single language, so i place my question here.

Thanks for your reply. I tried to go to safe mode of win 8 by holding the shift key while clicking "restart" on the login screen. (My login screen now shows 3 account users). Then i chose troubleshoot -> advanced options -> windows startup
settings-> i went to safe mode. The safe mode only showed a complete black screen with an only window: "Administrator: cmd.exe". I did as you said (typing NETPLWIZ) and the User accounts window appeared. I went to "properties" of each
user account and set 1st and 2nd accounts to Administrator but got the error: "This user cannot be added. Access is denied." and another error window: "Usert accounts: the group membership for ... could not be updated."
Yesterday, i went to elevated command prompt as an administrator and typed "net user administrator /active:yes" with hope that the built-in administrator would be activated and i would use it for full control settings of 3 other user accounts.
But i got the error: "system error 5. Access is denied."
Now, my position is quite bad. Login with guest account which was set as administrator, i still can not have full control of this laptop, so that all attempts of mine to change the user account settings is denied. This guest account also does not have a
password at all so that everyone can open my computer without typing a password. Because access is denied, i cannot set a password for the guest account even now it is the administrator account and i am loging in it.
p/s: I tried to refresh the system but still got the error: "There was a problem refreshing your PC. No changes were made". And i also tried to restore the system, but got the error: "System restore did not complete successfully. Your computer's
system files and settings were not changed. Details: A volume shadow copy service component encountered an unexpected error. Check the Application event log for more information (0x80042302)"
I went in registry editor in safe mode and did as you said but there was no "AutoAdminLogon", "DefaultUserName", "DefaultPassword". I only saw "AutoLogonSID" and other different names...
The problem i got half year ago has still remained and recently i made this mistake. https://social.technet.microsoft.com/Forums/en-US/8ebd868c-bdfd-412e-95a6-9dc0095d431c/cannot-paste-any-online-pictures-from-any-websites-into-wordpowerpointonenote-2013?forum=officeitpro
I am a young woman who always creates mistakes when setting computer because of my carelessness.
Hi,
These phenomenon should be access rights problem, you need to check your current system User Accounts status. In my opinion, your administrator account probably disabled.
Open Run, type LUSRMGR.MSC, press Enter.
Then check your current system account which Group they are belongs to.
If there is any progress, please feel free let me know.
Roger Lu
TechNet Community Support

I want to buy an in app purchase, I have forgotten my security questions. And I can't change them in the apple website unless I answer those as well. What do I do ?

I Want to Purchase something from an app, and I can't do so unless I answer the security questions. I have forgotten my security questions. I cannot change them in the apple website either. Unless I answer my original security questions. What do I do ?

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(108901)

Cannot change admin user to standard user (2 Admin Accounts)

I have an issue that I would like some help with. When I purchased my iMac a few years ago, I created one user account and just started using my computer. I am trying to implement a few Safe Computing practices by creating a new Admin user account and changing my original user account to a Standard user.
For some reason, I cannot change either of the accounts to a standard user after I type in the password. I've logged in as both and tried to change the other user profile to a standard user, but the checkbox is greyed out on both of the Admin User accounts.
I can create a new standard user, but I have everyting set the way I like it on my current Admin user account. It would be much easier to have a new Admin User account and "Downgrade" my original Admin account to a standard user account.
Any thoughts on why the option to change from an Admin user to a standard user would be "Greyed Out"? The support articles walk me through, what should be a few simple steps, but I can not change the settings because the checkbox is greyed out.
Thanks in advance for any thoughts, suggestions, ideas....

In a way it makes sense that the original Admin Account can;t be changed. If a user changed that account to non-admin and that was the only admin account it would be a mess to undo it. I agree that there should be some indication of this and even the ability to over rider it in a case like yours.
As there isn't the next best thing will be for you to duplicate the current admin account as a new user account and then use that duplicated account.
See How to copy a user account for instructions on how to duplicate an account.
post back if you have any questions.
regards

My app store shows wrong id and it is greyed out so I cannot change it to install updates

I am trying to install updates from the App store.
However, when I try to sign in, the dialogue box shows an old and wrong email address as my apple id.
Since the email is greyed out, I cannot change it to the correct current one.
I have checked that I am at the right location etc, restarted several times but no success.
Please advise.
Thanks
Sajeev53

Do you recognize the wrong ID, or is it unknown to you?

Get Info "Change All" button doesn't keep the proper "Open With" app

I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
The problem is:
-With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
Can anyone offer any tips on what might cause this and what fix is needed?
Thanks so much in advance!
Wade

Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
Thanks for the tips but I am still back at square one.
Wade

Wvc54gc cannot change it to the proper subnet...

Similar Messages

Maybe you are looking for