WWI Template - validity area question inside of a composition slave group

I am reading composition with exposure limits (SAP_EHS_1012_006) of the real sub then drilling into the list sub Occupation Exposure Limits (SAP_EHS_1023_006).
I want to show a table of the list subs, and then show the Usage Validity Area "US" only regulations for that list sub.
But when I try to put a "G" type repeat group around the list sub for validity area "US" it doesn;t work.
I saw a S:VERW type slave group but I am unable to tell if that is what is needed, because I can't find any samples.
My data is setup that the Usage Validity area records are:
1 - CA
2 - US
3 - MX
Here are some of the things I have tried:
<11BRG002(M,SAP_EHS_1023_006;)> <15BIF061(OR:01GESTDRVLID (P;) LK "US"029><15EIF061><11ERG002>
even though I try to test the P;*, the condition does not test all phrases.
As I said above I have tried to wrap with a type G repeating group and this didn't work either.
Thanks

The problem was that I needed to wrap a G type repeating group for US, around the the specification repeating group. And I needed to modify the Gen Variant rating/validity to include a line item for region US.

Similar Messages

Template - issue with validity area - check on multiple usages at once

Hi all
One customer requirement Iu2019m trying to solve, and I donu2019t find a solution, is the following:
<b>When we have two or more validity areas in the generation variant, we want to check on both at the same time in order to get the data on the SDS.</b>
<b>Is this possible or not and, in case it is possible, can someone explain me how to do this?</b>
Thanks in advance.
Two examples.
In the generation variant we have validity areas:
A.     REGION                SE
                     USE_CAT             IND
B.     REGION                NO
                     USE_CAT             IND
C.     REGION                NO
                     USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
1.     REGION                SE
                     USE_CAT             IND
2.     REGION                SE
                      USE_CAT             FER
3.     REGION                NO
                     USE_CAT             IND
When I use generation variant A, I only want to see instance 1 on the SDS.
When I use generation variant B, I only want to see instance 3 on the SDS.
When I use generation variant C, I donu2019t want to see any instances on the SDS.
I donu2019t find how to solve this.
When I donu2019t use a repeating group type G for validity area, using generation variant A, I get instances 1 and 2. Using generation variant B or C I get instance 3 on the SDS.
When I use a repeating group type G for validity area USE_CAT, using generation variant A or B, I get instances 1 and 3. Using generation variant C I get instance 2 on the SDS.
Similar with the exclude check put.
In the generation variant we have validity areas:
D.     REGION                SE
                     USE_CAT             IND
E.     REGION                NO
                       USE_CAT             FER
In the specification data of one VAT we have several instances. The usages added to these instances are:
4.     REGION                SE
                     USE_CAT             IND        excl
5.     REGION                REG_EU
                      REGION                SE           excl
                      USE_CAT             FER
6.     REGION                NO
                      USE_CAT             IND
When I use generation variant D, I donu2019t want to see an instance on the SDS.
When I use generation variant E, I donu2019t want to see an instance on the SDS
I donu2019t find how to solve this.
When I donu2019t use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 4 on the SDS. Using generation variant E I gent instance 6 on the SDS.
When I use a repeating group G for validity area USE_CAT, using generation variant D, I get instance 6 on the SDS. Using generation variant E, I get instance 5 on the SDS.
Kind regards,
Luk

Hello Luk
You wrote: When I understand the documentation of the validity area's correct, options subset, superset, 1:1, ... always reflect to the relation of the entry in the generation variant and the usage that is maintained one on the data.
This is exactly how the link is done between data in EH&S and the data which show up in WWI document (please exclude the topic of G group at the moment; this is special). Therefore the validity area entered in GenVar is the "Leading" validity area.
Regarding you questions some "basic" work is needed. May be this help you to find new options to solve your issue:
SAP EH&S uses the "validity area type" and the "validity area". Common used are the validity types:
REGION
DGREGION
PLANT
It seems that you have created a new validity area type USE_CAT with validity areas wich you have defined by your own.
I will give you only an overview about the "normal" use of REGION. In this case the validity area is normally a 1:1 relation to a country (defintion is done via customizing). A "special" validity area is REG_WORLD (please refer to SAP docu). REG_WOLRD contains automatically (without further doing) all other validity areas of type REGION. Now it is always possible to generate new "fictive" validity areas. E.g. you Could define the validity area "NAFTA" which would have a link to the countries: US, MX etc. These validiyta areas can be used in data maintenance and in the GenVar as well.
As I have no knowlede how you have defined the USE_CAT" validity areas I can not provide you hints. But I would like to provide further hints in using the "Excl." Flag of usage of the VAT
Example: if you use Rating 1 in combination with REG_WORLD, DE excluded and the GenVar has the leading validity area DE this value is not used in WWI report. But if the genVar would have the leading validity area BE it would be used.
Please check really carefully the topic of "subset, superset, 1:1,.." because this is the "key" issue if or if not a VAT will show up in WWI.
Now back to your next question:
when on the data a validity area is excluded and the same validity area is present in the generation variant, data should not be displayed even when there is a positive match prasent as well. (e.g. positive match on region, negative match on use category).
Now as explained above: if in VAT level a validity area is excluded but the same validity area is used as leading Validity area in WWI report the value will not show up. The same should be true if you have used "G groups" with discrete validity areas
Next question:
when you defined the data as relevant for region EU and use category industrial, data should only be displayed when the generation variant contains both a region related to EU AND this industrial use.
Here I would need more information. The GenVar contains by default only one leading validity area. Therefore any further "logic" must be applied by using "G Group" in the template and now things get "worse" in some sense.
If I remember correct the following should be true:
If you have used properly the G Group with "Use_CAT" in your WWI document this should work:
You have defined the VAT as : Rating + DE + IND. Now in a special section of your WWI report you have used the G Group. By using this the value should be printed but not a parallel VAT value with Rating + DE + FER.
If you have used this logic in your whole template I really salute because the WWI template is in my opinion very complex to understand and the logic how to retrieve the data from EH&S into the WWI report is complex too and the length of the report should have increased by at least 20 % or something like that
Now you have mentioned a further option you are using:
"Currently we solve this by creating multiple characteristics (use category specific) and selecting only on validity area region based on the generation variant."
If I underdstood your explanation correct you have done the following:
If necessary you have entered a further characteristic in the Class called "use CAT" which must have values. Then using the "if else etc." logic of WWI you select only those VATs into the WWI report which does have the correct "Use Cat".
Once again:hard work which you have done. In my opinion you should go on with this approach. In doing so you have implemented an "and" logic. Only if the Value does have DE and the UseCat (in characteristic) Is e.g. FER the value will be printed.
It is complex yes but the "G Group" is much complexer
Natural solution of demands like this is using further ratings to select the data properly. It seems to be you have excluded this option.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 4, 2011 5:50 PM
Edited by: Christoph Bergemann on Sep 4, 2011 5:54 PM

Content Area in a page Template should not be inside a h:form

In my template page I have some buttons which reside in a <h:form> tag. If I place a Content Area somewhere inside the <h:form> tag, the ACTION methods of the buttons DO NOT WORK!!!!
e.g. Action methods of the buttons WORK PROPERLY
<f:view>
<BODY>
<h:form styleClass="form" id="frmTemplate">
...some buttons...
</h:form>
<%-- tpl:insert attribute="bodyarea" --%>Default content of bodyarea<%-- /tpl:insert --%>
</BODY>
</f:view>e.g. Action methods of the buttons DO NOT work
<f:view>
<BODY>
<h:form styleClass="form" id="frmTemplate">
...some buttons...
<%-- tpl:insert attribute="bodyarea" --%>Default content of bodyarea<%-- /tpl:insert --%>
</h:form>
</BODY>
</f:view>Any ideas why?

AFAIK there's no practical way to do what you require. Sorry. This is one of the many downsides to Framed sites. It also makes bookmarking and printing pages difficult. Not to mention user unfriendly from a web accessibility viewpoint. Re-think your need for Iframes throughout an entire website. The best websites use one complete page for each topic. Index, About Us, Contact Us, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

How to make a dynamic wwi template?

Hello,
I have to develop a wwi template for a label product. In this template I have 3 boxes to put SAP phrases in 3 different languages.
Depending of the material for which I want to print my label, the 3 languages to print are not the same.
My idea is to create a specific table in SAP, and depending of the material, the template will get, with a modul function for example, languages to use.
Ex:
material1 EN
material1 FR
material1 IT
material2 DE
material2 PT
material2 ES
If I want to print a label for material2, the template will find languages DE, PT and ES and used it to put phrases in boxes of my wwi template (1 boxe = 1 language).
Do you think it possible?
Do you have other solutions to meet my need?
Thank in advance for your help.
Best regards,
/Ludovic

Hello Ludovic
luckily you created two "subthreads". Therefore I try to answer per thread:
Thread 1: answer:
1.) a WWI report of any kind (MSDS, Label SOP etc.) does always ! have one "leading validity area" and one ! leading language
This is an very important aspect in label determination !
Therefore you do not ! realize in using cg54/cg50 on first glance by SAP standard that a combination of genvar with leading languages (released) contains languages
1.) FR, IT, ES as in your first example or
2.) EN, IR, DA in your second example
and this is one of the reasons why label determation is quite tricky and very hard to find "solutions".
Now if we still discuss the "label to stock" topic and if you carefully read
http://help.sap.com/erp2005_ehp_05/helpdata/en/a7/288aa30a6c11d28a220000e829fbbd/frameset.htm
you will realize that there is the option to perform "Additional user entries" which in my opinion could be used to "change" the label determination process so that the system will find "automaticaly" the "correct" label (e.g customer is in italy !)
In any case: I hope you realized that it is "not" easy to find the right label. In my opion it is not "allowed" to have an overlap.
That means the G groups must be designed in such a way that they "contain" always three different languages (or you would need more logic etc.)
Coming back to your example:
Assuming that you have used genvar1 to create the label you "must" define the "leading" languages. Normally only the e.g. "R phrases" etc. must be printed on the label in more than one language. Therefore the "rest" of the template can be described by using one language (keep in mind that you need often "phrases" to be printed on the document. E.g. Phrases which could contain information like the word: "company" which is once again language dependent). Therefore as europe is quite complex you need a lot of labels (I believe we have 25 and more languages in EU). Now it is very important to define based on thje leading languages which "sublanguages" should show up in the document.
May be this gives your further hints in finding options/solutions
Thread 2 answer:
Once again back to the topic "validity area" in general. I am sorry. I can not provide you a "specific" answer to your question
The validity area "aims" as the linkt between "country" and content of WWI document (in some sense).
From the point of report at least the "released" WWI report (or the report which is generated on the fly) is of interest. Normally as in the SAP standard there is a "link" between plant (make to stock scenario) and legislation which an help. It is clear that a label regarding a plant in europe should have R/S sentences (or H/P) as a content. Now on the "top" (to make it more complex) you have different sizes of packaging of materials (drum, ...); therefore you need "sizes" (like A4) to descirbe the "max" size of label there "all" informaiotn should be placed on.
The "label view" as well the "label stock" topic (to my understanding) aims as a "further" help to find the right label (right size, right validity area, right content etc.)
May be you "misunderstood one WWI topic (or I misinterpret you)
- in label printing transaction: change countries: IT
Normally this does not change the language of the label (if we are talking about released reports).
The "G group" is expanded during "raw report" generation. Only the "mat name" and other information is expanded later.
Regarding GLM: this is from my point of view a "comlex" submodule of EH&S and you need very ! good business concepts and set up to get the desired result (in label determination etc.).
So im sorry: I can not provide to you a final answer.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 14, 2011 2:21 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:23 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:35 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:36 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:37 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:37 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:39 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:40 PM
Edited by: Christoph Bergemann on Sep 14, 2011 2:41 PM

WWI Template - Repeating Group -S:CLASS

Dear Experts
while editing the WWI templates,
In Repeating Group - Slave group (S:CLASS), we are suppose to insert the Report Symbol using Expansion Mode NM Method, using C14N_SYMBOL_DGREG_SUPPRESS this method.
Can any body please convey me the Significance or Use of this C14N_SYMBOL_DGREG_SUPPRESS
Thanking You,
Regards
Amol Joshi
Edited by: Amol Joshi on Jan 10, 2011 7:31 AM

Hi Amol,
If the symbol for the dangerous goods regulation (G1022024LW) is defined within the repeating group S:CLASS, the characteristic values that are not relevant are suppressed by the UN listed substance.
This ensures that the system only outputs the UN listed substance legal data valid for the corresponding regulation.
[link to help|http://help.sap.com/saphelp_45b/helpdata/en/e3/4536cd199b11d286fd080009b98822/frameset.htm]
Regards
JCD

Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

Hi,
I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
We are unable to reproduce this issue in our Dev Envt.
Could anyone of you please help me.
Thanks in Advance!
Regards,
Venkat

Hi Venkat,
I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
Does that help?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Restrictions/ Usage/ Validity Area/ Validity Area Category for DG

Hi Experts,
Following situation:
At the moment we have the dangerous goods management in EH&S active.
So we use the substance to build our "UN-Numbers" and we use the Classification "CL***" to build the dangerous goods classification.
For each legal UN-Number we create one Substance with value assignment instance for each regulation. For example for UN1993 we create the substance UN1993 and in the property tree we assign for each regulation one value assignment instance.
Means 3 instances one for ADR, IATA_C and IMDG. For each of these instances we use the standard usage (Validity Area) "DANGEROUSG:REG_WORLD"
Now we create one Classification for the Substance UN1993, for example CL1993. So we do it so, that CL1993 inherits from UN1993. In this classification in the Transport Class. Tab we assign to each DG Regulation the UN1993 and release them.
So, now we assign a material which is related to this UN-Number to the classification and do the filling (DGE5).
Problem:
Everything is ok, the Dangerous Goods Master is created for 3 Regulations.
But the filling log (DGP7) shows error msg DGA422 "Specification CL1993 value assignment SAP_EHS_1022_024 not saved (same priorities)"
But everything is ok.
Question:
If I now change the usage of the Substance UN1993 instances for ADR to "DANGEROUSG: DGADR", for IATA_C to DANGEROUSG: DGIATA_C, for IMDG to DANGEROUSG: DGIMDG the filling will be ok.
But now my questions is. Where I have to use which Usages? because, also in the header of the Substance and classification there must be a Restriction (Validity Area).
We have only the SAP standard values in the EH&S:
VAreaCat | Val. Area   | Description
REGION | ADNR     | ADNR states
REGION     | ADR       | ADR states
REGION     | DE     | Germany
DGREGION     | DGADNR     |   ADNR regulation - inland waterway
DGREGION     | DGADR     | ADR regulation - road
DGREGION     | DGCFR     | CFR regulation - all modes of trans. USA
DGREGION     | DGGGVE |      GGVE regulation - rail
DGREGION     | DGGGVS     |   GGVS regulation - road
DGREGION     | DGIATA_C     | IATA_C regulation - plane / cargo
DGREGION     | DGIATA_P     | IATA regulation - plane / passenger
DGREGION     | DGIMDG     | IMDG regulation - sea
DGREGION     | DGRID     | RID regulation - rail
REGION     | ES     |   Spain
REGION     | FR     |   France
REGION     | GB      | Great Britain
REGION     | REG_EU      | European Union
REGION     | REG_WORLD      | World
REGION     | RID      | RID states
REGION     | TEXAS     | Texas
REGION     | US |      USA
So what is the right way to use the restriction/ usage ?
Thank you in advance.
Edited by: Thomas Neehoff on Jul 22, 2010 12:59 PM

Hello
I did not catch perfect your question. There is a "restriction tab" on "specification header". This restriction tab has a special purpose. It is not related / linked to the DG master filling (to my knowledge) and it is used "rarely".
Regarding the "restriction tab" refer to this help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/286c740a6c11d28a220000e829fbbd/frameset.htm => Specification Management => Specificaiton Editing => Restrictions
Now coming back to your topic: based on the DG customizing you can specifcy which "usage" is that which is used to retrieve the data during filling (you need to define regulatory lists etc.).
This topic is a little bit complex in my opinion. Based on your set up you need to maintain the UN substances "different" so that the filling does work.
May be take a look here:
http://help.sap.com/erp2005_ehp_04/helpdata/en/de/5174db4c4b11d18a110000e816ae6e/frameset.htm
In one of the customizing acitiviies there is a "flag" with which you specify the priority regarding rating. Normalyl the "prioritty "is selected you have done "first DANGEROUSG and than STANDARD.
I believe in a different customizing acitvity the link between regulatory list (IMDG) an validity area (DGIMDG) is done. Based on this set up the filling is done.
So my proposal is to do a recheck of DG customizing.
With best regards
C.B.
PS: On the top you have this validity area type (DGREGION) which you need take care
Edited by: Christoph Bergemann on Jul 22, 2010 9:01 PM
Edited by: Christoph Bergemann on Jul 22, 2010 9:02 PM
Edited by: Christoph Bergemann on Jul 22, 2010 9:04 PM
Edited by: Christoph Bergemann on Jul 22, 2010 9:06 PM

Where default validations are being done in ATG?

Hi All,
I want to know where default validations are being carried out for login name and password and user existing already conditions (in which class). How the error message is being created and populated?
For example, when i try to register with a email (lolgin value) that is already existing, then i'm getting the following error message -
     "A user already exists with the login [email protected]". I want to know how this error message is created.
     Also,another example- You must supply a value for the 'login' field of this form.     login.
     Here, i'm getting the propertyName also with the error message. If i want to generate the same type exception message, how to create?
     And where those error messages are being added to formExceptions list
Please let me know.
Thanks,
VishnuVardhan

Hi,
I want to know where default validations are being carried out for login name and password and user existing already conditions (in which class). How the error message is being created and populated?
For example, when i try to register with a email (lolgin value) that is already existing, then i'm getting the following error message -
     "A user already exists with the login [email protected]". I want to know how this error message is created.
     Also,another example- You must supply a value for the 'login' field of this form.     login.
     Here, i'm getting the propertyName also with the error message. If i want to generate the same type exception message, how to create?
     And where those error messages are being added to formExceptions list
Please refer to the below link for the handling of the form exceptions in ATG.
Oracle ATG Web Commerce - Form Error Handling
The error messages are added as FormExceptions to the formExceptions Vector in the form handler. The actual text of the error message can be given in the form handler directly or can be given in a resource bundle file and can be referenced from the form handler.
Hope this helps.
Keep posting the updates / questions.
Thanks,
Gopinath Ramasamy

Oracle.apps.xdo.template.fo.area.NoAvailableAreaException

Hi
We are getting below error for Commercial invoice report for some deliveries (with more than one order)
Template code: SDSCOMINVKBI
Template app: SDS
Language: en
Territory: 00
Output type: PDF
[6/29/12 6:14:26 AM] [UNEXPECTED] [582604:RT86396421] oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area. Please look into the incomplete output file for cause.
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:719)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:710)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.createNewPage(FormattingEngine.java:475)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout(FormattingEngine.java:263)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.run(FormattingEngine.java:121)
at oracle.apps.xdo.template.fo.FOHandler.endElement(FOHandler.java:600)
at oracle.apps.xdo.common.xml.XSLTHandler$EEEntry.sendEvent(XSLTHandler.java:594)
at oracle.apps.xdo.common.xml.XSLTMerger.startElement(XSLTMerger.java:51)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1315)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:362)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:308)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:213)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:320)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1051)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Thanks
Kamalaka.G

You cannot use BIP Desktop 11g with EBS - you need to use a special version. Pl see these MOS Docs
How To Download Oracle XML Publisher Desktop 5.6.3 (BI Publisher 10g)? [ID 556032.1]
How To Obtain The Latest Version Of Oracle BI Publisher Desktop? [ID 1362518.1]
Overview of Available Patches for Oracle XML Publisher embedded in the Oracle E-Business Suite [ID 1138602.1]
HTH
Srini

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

If you have Pages you can create customs pages for your book as TD suggested. If you have Pages from iWork 09 or 11 this app will add 80 or so additional frames to those offered: Frames and Strokes Installer. Don't use it on the latest Pages version, however.
This tutorial shows how to create a custom page with the theme's background: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book. Once the page is complete to get it into iPhoto as a jpeg file follow these steps:
Here's how to get any file into iPhoto as a jpeg file:
1 - open the file in any application that will open it.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 300 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. For books to be printed choose 300 dpi.

One or more PDF documents are open inside a web browser - message

Hi,
I have a new L series notebook and its great. The only foible I can think of is a message I keep getting when I try to shutdown. There is a message box that says "One or more PDF documents are open inside a web browser. If you exit adobe reader now, those documents will be closed. Are you sure you want to exit?".
The thing is I do not have any PDF's or web browsers open at the time! Can you help me please?
Thanks, Mark.

Hi Mark
Believe me its nothing serious the same happens on my notebook from time to time
Usually the PDF files can be read with the Adobe Acrobat reader. This application service runs in the OS background and this message can appears if the Adobe Acrobat reader cannot close the background process automatically
I have solved this tiny problem by removing the acrobat reader from the system. After new reboot I have reinstalled it again
Now the message does not appear and all runs like a dream ;)

Get error when add start:body tag, ERROR: oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area

I'm using "Oracle BI Publisher Template Builder for Word"
Version: 10.1.3.2.1 Build 87
When I try to add <?start:body?> and <?end body?> tags get error in preview to pdf
My structure is:
for-each G_INVOICE
[TABLE WITH HEADER INFORMATION]
<?start:body?>
[for-each G_DISTRIBUTION_LINE
TABLE WITH DISTRIBUTION LINES INFO
end G_DISTRIBUTION_LINE]
<?end body?>
"text for special instructions"
end G_INVOICE
The log generated is:
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: Z:\projects\AEROSTAR\reports\AERO - AP - Disbursal Request\AEROAPDISREQ.xml
FOProcessor setLocale: en-us
oracle.apps.xdo.template.fo.area.NoAvailableAreaException: Not enough rendering area. Please look into the incomplete output file for cause.
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.createNewPage(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.startLayout(Unknown Source)
at oracle.apps.xdo.template.fo.elements.FormattingEngine.run(Unknown Source)
at oracle.apps.xdo.template.fo.FOHandler.endElement(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTHandler$EEEntry.sendEvent(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTMerger.startElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
at oracle.apps.xdo.template.fo.FOProcessingEngine.process(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at RTF2PDF.runRTFto(RTF2PDF.java:632)
at RTF2PDF.runXDO(RTF2PDF.java:466)
at RTF2PDF.main(RTF2PDF.java:254)
Please, Need help.
Thanks in advance.

The cause for this seems to be that a row in a table is larger than a page, and there is no place left for the Header row.
Check the bellow action plan:
1. Edit the template in MS Word.
2. Click on the table.
3. Right click on the little crossed square in the upper right corner of the table.
4. Click on 'Table Properties' / tab 'ROW'.
5. Look at all rows by using the button 'Next Row'.
6. If 'Repeat as Header at the top of each page' is checked, please uncheck it.
7. Save the template and retry.
BR,
Alex

Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad

Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad

On your iPad - go to Settings>Mail, Contacts, Calendars>Load Remote Images>On. Try that first.
You can also try a reset. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail and all other apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

XMl report output error oracle.apps.xdo.template.fo.area.NoAvailableAreaExc

All,
Here is the error I'm getting when AR invoice is printed in PD fformat. I dont see this issue for all invoices, I ahve this issue when invoice has 9 lines.
oracle.apps.xdo.template.fo.area.NoAvailableAreaException: object = 'oracle.apps.xdo.template.fo.area.BlockArea@186f3b3', aInfo: (x, y, w, h) = (0, 0, -18050, 353403)
Any idea how to fix this error, or where can i look into template to fix.
Thanks
Pallavi

Hi,
Could you please let me know how this issue is fixed.
I am facing the same issue.
Thanks for you help

Enter validity area between years 1996 - 2010

Dear Expert,
We are trying to change factory calendar as 2012, earlier it is open from period 1996 to 2010.
but the system is giving the error "Please enter validity area between years 1996 - 2010."
pl. give us solution
thanks
Abhay.

Hi,
Please change the validity of the holiday calandar at SCAL Aand then try chage the factory calandar difinition.This will solve your problem,
Regards,

WWI Template - validity area question inside of a composition slave group

Similar Messages

Maybe you are looking for