Wyse Thin client not connecting to Windows 2008 R2 server
Configuration
SBS 2011 Server
Windows 2008 R2 server with Remote Desktop Services installed, License Manager installed.
WYSE WT3125SE thin clients with Windows CE 5
I setup the Windows 2008 with Remote Desktop Services and was able to successfully connect the Thin client. Then I installed the License Manger and applied my Open license using User Cals. Was able to login. Next day I get the following
error-"Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again" I still can connect fine from other machines even Windows Home Ed.
I remove license server and still was unable to connect. Built a second Windows 2008 R2 server with RDS on it. Was able to connect without issue. Pointed it to the first RDS server license manager and have still been able to connect with
the Thin Client. The thin client can rdp to the SBS server without issue in admin mode, can connect to RDS2 server but not RDS1 with the license manger. So my issue is with the license and so my question is what is it with the license server
running on that server that is keeping thin client from connecting. I even did a reload of RDS1 and tested connecting throughout the process and it worked up until I applied the license and then it stops. And then if I uninstall the license, rds, remove
from domain still not able to connect. Any help would be appreciated.
We had the same problem with older terminals after cloning a 2008R2 rds server and sysprep it.
The original rds server worked fine but when the old terminals connect to the new 1 they come up with the error : Because
of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again"
After reading all of the postings about this issue and tried the reactivate solution of the license server,
I was sure that it had something to do with the x509 certificates that are generated the first time you connect to a valid license server.
What I did, I installed a new license server activate it but did not install licenses on it.
I pointed the defective rds server to the newly installed license server and deleted the following registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Certificate
X509 Certificate
X509 Certificate ID
X509 Certificate2
Then reboot.
After the reboot all old terminals can connect fine again. As final step I pointed the rds server to the same license server as the other ones,
reboot and all worked fine.
So conclusion is that when you pont a rds server to a license server that has the new type of licenses on it it will generate the wrong x509 certificates
that are not supported by the older clients, by pointing it first to 1 without any rds calls on it, it generates the older x509 certificates which are compatible with the older rdp clients then the switch to new license server will then not regenerate the
x509 certs so it keeps working.
I hope this helps someone
This issue was driving me crazy so very happy that it is resolved now
Cheers Frits
Similar Messages
-
System.Windows.Forms.SaveFileDialog not working under Windows 2008 R2 Server
I am using Windows Server 2008 R2 (64-bit) that is been virtualized with Hyper-V and it is being used as a "Remote Desktop Server".
I am trying to use this PowerShell code that will open a "Save-File-Dialog" box to select the PDF file and send it to my "batch" file for scanning. This code works great on my Windows Vista machine and my Windows 7 32-bit machine
but I cannot get it to work on the "Windows 2008 R2 Server (64-bit)". It will not come up with any window at all and it will not produce any errors at all, so I can't exactly google for this issue. I am using PowerShell 2.0 from 2009.
Any ideas? I tried it from an Admin account and a regular domain users and neither worked at all, no errors, no window, no nothing.
*** Update ***
I took Out-Null out and I received this...
GAC Version Location
True v2.0.50727 C:\Windows\assembly\GAC_MSIL\System.Windows.Forms\2.0.0.0__b77a5c561934e089\System.Windows.Forms.dll
I then checked the path and the DLL file was in there and it had read and execute permissions for Domain users and Administrators and the window still won't pop up...
Here is the entire code in question.....
# Uses the dot net assembly to give the users a Save-File-Dialog box so they can decide where to put the pdf file
Function Get-SaveFile($initialDirectory){
[System.Reflection.Assembly]::LoadWithPartialName("System.windows.forms") | Out-Null
$SaveFileDialog = New-Object System.Windows.Forms.SaveFileDialog
$SaveFileDialog.initialDirectory = $initialDirectory
$SaveFileDialog.filter = "PDF files (*.pdf)| *.pdf"
$SaveFileDialog.ShowDialog() | Out-Null
$SaveFileDialog.filename
# open dialog box to select the .nessuss file.
$OutputFile = Get-SaveFile
# User selected where they want to put the scanned.pdf file and it will automatically set it to .pdf for them
start-process Scan $OutputFileI ran the code you have in your function on a Windows 2008 Standard server, and it seems to be hanging on the line
$SaveFileDialog.ShowDialog()
| Out-Null
It just sits there and nothing happens, but if I run it on my Windows 7 machines, it runs without any issues. So it seems like the dialog opened, but behind the scenes, and is waiting on the user, but since it doesn't open, the user can't do anything.
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet -
Solaris nis client can't connect to Windows 2008 NIS Server across subnets
I have been using Microsoft Windows Server for NIS for years to centralize some accounts accessing Solaris and Linux OS.
Windows 2003 R2 Indentity Management for UNIX version of Server for NIS was last working version with Solairs.
After upgrading Domain to Windows 2008 all Solaris clients that are on different subnets fail to bind and connect to NIS servers now.
These servers already were setup using ypinit -c to manually add the NIS servers to connect to and prior to Windows 2008 this worked.
Now no Solaris nis clients on different subnets (no firewall between) can connect , but other Unix/Linux OS connect fine.
Is this a known issue and can we get a resolution as it seems only Solaris is affected?Hi Mid.Hudson-IT,
Before we begin ,we should ensure we have configured the printer server correctly .
Here is a link for reference of configuring the printer server .
Print server role: Configuring a print server
https://technet.microsoft.com/en-us/library/cc775791(v=ws.10).aspx
"I can map all of the printers on the network to the print server as-well as install the drivers correctly and I can resolve the IP and server name via DNS"
From this sentence ,I can`t figure out whether you have tried to ping the server both with the IP adress and name adress from the client ?
If we can ping the print server from the client,we can ensure the connection to the printer server is good .
Then we can try to install the printer driver directly to have a check .In the adress bar of Windows Explorer ,input "\\server name \the printer name"
If we cannot ping the print server ,we should troubleshoot the network issue firstly.
We also can check the event viewer for more information to troubleshoot this issue .
Best regards -
Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy -
How to connect to Windows 2008 VPN server with certificate support
Unfortunatelly if I select any Windows 2008 server compatible protocol (PPTP, L2TP) I cannot select PKI certificate, its only available for Cisco VPN. Yet my company has 1000 laptops and utilizing Windows 2008 Server for VPN (Cisco is too expensive and unnecessary because VPN is part of Windows Server). PKI certificate is required for connection security.
Any plans to enable certificates for PPTP or L2TP in 2.1 firmware? Even better would be to add SSTP protocol with certificate support, because it takes only one standard TCP connection (https) per user (uses least possible NAT resources for heavy loaded NATed WiFi spots). Also in some public places https is the only option to connect as PPTP and L2TP are filtered.Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SAPSprint installation on Windows 2008 R2 Server 64-bit
Dear Gurus,
as we change our print server to Windows 2008 R2 Server 64-bit I need to install SAPSprint for SAP printing with connection type 'S' out of a NW7.0 based system on HP-UX.
Till now we used SAPlpd on a 32-bit Windows Server......
1) Do I simply need to install the xSPrint.exe or can this happen only in combination with the whole SAPGui?
2) According to note 66971 for Windows 2008 R2 Server 64-bit only SAPGui 7.20 is supported.
Does this mean that I also have to use SAPSprint release 7.20 or can I use any other release as well.
On our Windows clients we run SAPGui 7.10.
Is there any correlation between the SAPGui running on the clients and the SAPGui / SAPSprint release running on the print server or can I simply install the highest SAPSprint release 7.20 on the print server to be sure that it will work with WK8 R2 64-bit?
I hope I could explain my problem and I am looking forward to your reply.
Thanks a lot in advance!
GünterDear Günter.
Your question is spread over some different areas. Let me point out some tracks to follow:
There is only a 32-bit version of SAPSprint but that one works also under 64-bit; please refer to SAP note 894444.
Regarding SAPgui, in general it is recommended to have the last version as it is downwards-compatible with older versions.
But specially, let me highlight that Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released.
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See SAP note 1383873 ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
--> Support of Microsoft Windows Server 2008 R2
Cheers! -
Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.
Hello...
It seems I got it fixed!! I had been trying the Fixit tool from
http://support.microsoft.com/kb/306759 while typing up there :))))
This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
Hope it helps someone. -
We have updated our site server to Windows 2008 R2 and now we are experiencing sporadic issues with our Wyse thin clients D90D7. After the server OS upgrade, some of our thin clients are experiencing memory leaks. Anyone come across this?
Thank you!!!I would recommend that you contact Wyse Technical Support for assistance. Maybe there are some fixes to install on the application side.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Windows 2008 R2 Server not showing update history and not detecting new updates
Hi Sirs,
We have a Windows 2008 R2 server which is showing an empty windows update history, and is not detecting new updates from the WSUS server. It says that the windows is up to date, no error when trying to detect new updates, but I doubt it because when I checked
the installed updates menu, it shows that that the most recent update date installed was last 2013, it just stop detecting and installing updates. I've already tried the ff workarounds but to no avail:
1. restart wuauserv and bits service
2. rename/delete the software distribution folder
3. reinstalled the update agent/restarted the server
4. deleted the susclientid on the registry
Thanks in advanced for your help.
here's the windowsupdate.log:
2014-07-22 00:57:06:728 928 a34 AU #############
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:06:728 928 a34 AU Featured notifications is disabled.
2014-07-22 00:57:06:728 928 a34 AU AU setting next detection timeout to 2014-07-21 20:50:56
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:11:727 928 abc Report REPORT EVENT: {AF0753F1-F6F9-4583-87B0-A0B0AEA0C6A7} 2014-07-22 00:57:06:728+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 00:57:11:727 928 abc Report REPORT EVENT: {188957AA-577F-4DC5-9CDB-2D8CFEE96670} 2014-07-22 00:57:06:728+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 00:57:11:727 928 abc Report CWERReporter finishing event handling. (00000000)
2014-07-22 01:11:10:931 928 abc Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 01:11:10:947 928 abc Report Reporter successfully uploaded 2 events.
2014-07-22 04:50:56:736 928 1130 AU #############
2014-07-22 04:50:56:736 928 1130 AU ## START ## AU: Search for updates
2014-07-22 04:50:56:736 928 1130 AU #########
2014-07-22 04:50:56:736 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:50:56:736 928 d08 Agent *************
2014-07-22 04:50:56:736 928 d08 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 04:50:56:736 928 d08 Agent *********
2014-07-22 04:50:56:736 928 d08 Agent * Online = Yes; Ignore download priority = No
2014-07-22 04:50:56:736 928 d08 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 04:50:56:736 928 d08 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 04:50:56:736 928 d08 Agent * Search Scope = {Machine}
2014-07-22 04:50:57:017 928 d08 Setup Checking for agent SelfUpdate
2014-07-22 04:50:57:017 928 d08 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 04:50:57:017 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 04:50:57:017 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:611 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 04:50:59:611 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:611 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 04:50:59:611 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:626 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 04:50:59:626 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:626 928 d08 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 04:50:59:626 928 d08 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 04:50:59:626 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:095 928 d08 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:095 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:110 928 d08 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:110 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:142 928 d08 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:142 928 d08 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 04:51:01:860 928 d08 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 04:51:01:860 928 d08 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 04:51:01:891 928 d08 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 04:51:01:891 928 d08 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 04:51:01:891 928 d08 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 04:51:04:485 928 d08 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 04:51:04:485 928 d08 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 04:51:04:875 928 d08 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 04:51:04:875 928 d08 Agent *********
2014-07-22 04:51:04:875 928 d08 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 04:51:04:875 928 d08 Agent *************
2014-07-22 04:51:04:875 928 1278 AU >>## RESUMED ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:51:04:875 928 1278 AU # 0 updates detected
2014-07-22 04:51:04:875 928 1278 AU #########
2014-07-22 04:51:04:875 928 1278 AU ## END ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:51:04:875 928 1278 AU #############
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:04:875 928 1278 AU Featured notifications is disabled.
2014-07-22 04:51:04:875 928 1278 AU AU setting next detection timeout to 2014-07-22 00:38:28
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:09:874 928 d08 Report REPORT EVENT: {FE398C01-75A1-4AD8-8C43-0894FCFCE13F} 2014-07-22 04:51:04:875+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 04:51:09:874 928 d08 Report REPORT EVENT: {CDA386AD-6392-4C34-859E-35307BCB5EA0} 2014-07-22 04:51:04:875+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 04:51:09:874 928 d08 Report CWERReporter finishing event handling. (00000000)
2014-07-22 05:05:09:109 928 d08 Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 05:05:09:109 928 d08 Report Reporter successfully uploaded 2 events.
2014-07-22 08:38:28:883 928 1130 AU #############
2014-07-22 08:38:28:883 928 1130 AU ## START ## AU: Search for updates
2014-07-22 08:38:28:883 928 1130 AU #########
2014-07-22 08:38:28:883 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:28:883 928 53c Agent *************
2014-07-22 08:38:28:883 928 53c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 08:38:28:883 928 53c Agent *********
2014-07-22 08:38:28:883 928 53c Agent * Online = Yes; Ignore download priority = No
2014-07-22 08:38:28:883 928 53c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 08:38:28:883 928 53c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 08:38:28:883 928 53c Agent * Search Scope = {Machine}
2014-07-22 08:38:29:195 928 53c Setup Checking for agent SelfUpdate
2014-07-22 08:38:29:195 928 53c Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 08:38:29:195 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 08:38:29:195 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:804 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 08:38:31:804 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:804 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 08:38:31:820 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:820 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 08:38:31:820 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:835 928 53c Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 08:38:31:835 928 53c Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 08:38:31:835 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:241 928 53c Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:241 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:272 928 53c Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:272 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:288 928 53c Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:288 928 53c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 08:38:33:991 928 53c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 08:38:33:991 928 53c PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 08:38:34:038 928 53c PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 08:38:34:038 928 53c PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 08:38:34:038 928 53c PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 08:38:36:616 928 53c PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 08:38:36:616 928 53c PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 08:38:37:022 928 53c Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 08:38:37:022 928 53c Agent *********
2014-07-22 08:38:37:022 928 53c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 08:38:37:022 928 53c Agent *************
2014-07-22 08:38:37:022 928 aa8 AU >>## RESUMED ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:37:022 928 aa8 AU # 0 updates detected
2014-07-22 08:38:37:022 928 aa8 AU #########
2014-07-22 08:38:37:022 928 aa8 AU ## END ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:37:022 928 aa8 AU #############
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:37:022 928 aa8 AU Featured notifications is disabled.
2014-07-22 08:38:37:022 928 aa8 AU AU setting next detection timeout to 2014-07-22 04:15:53
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:42:021 928 53c Report REPORT EVENT: {45B5AD35-C612-4C43-8FE0-DFC63B114FC9} 2014-07-22 08:38:37:022+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 08:38:42:021 928 53c Report REPORT EVENT: {BA606714-0153-41BA-ADC8-78520F678D97} 2014-07-22 08:38:37:022+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 08:38:42:021 928 53c Report CWERReporter finishing event handling. (00000000)
2014-07-22 08:52:41:224 928 53c Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 08:52:41:240 928 53c Report Reporter successfully uploaded 2 events.
2014-07-22 12:15:53:027 928 1130 AU #############
2014-07-22 12:15:53:027 928 1130 AU ## START ## AU: Search for updates
2014-07-22 12:15:53:027 928 1130 AU #########
2014-07-22 12:15:53:027 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:15:53:043 928 a58 Agent *************
2014-07-22 12:15:53:043 928 a58 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 12:15:53:043 928 a58 Agent *********
2014-07-22 12:15:53:043 928 a58 Agent * Online = Yes; Ignore download priority = No
2014-07-22 12:15:53:043 928 a58 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 12:15:53:043 928 a58 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 12:15:53:043 928 a58 Agent * Search Scope = {Machine}
2014-07-22 12:15:53:308 928 a58 Setup Checking for agent SelfUpdate
2014-07-22 12:15:53:308 928 a58 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 12:15:53:308 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 12:15:53:324 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:901 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 12:15:55:901 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:901 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 12:15:55:917 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:917 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 12:15:55:917 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:933 928 a58 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 12:15:55:933 928 a58 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 12:15:55:933 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:167 928 a58 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:167 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:167 928 a58 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:167 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:198 928 a58 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:198 928 a58 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 12:15:57:917 928 a58 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 12:15:57:917 928 a58 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 12:15:57:963 928 a58 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 12:15:57:963 928 a58 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 12:15:57:963 928 a58 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 12:16:00:572 928 a58 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 12:16:00:572 928 a58 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 12:16:00:932 928 a58 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 12:16:00:932 928 a58 Agent *********
2014-07-22 12:16:00:932 928 a58 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 12:16:00:932 928 a58 Agent *************
2014-07-22 12:16:00:932 928 1120 AU >>## RESUMED ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:16:00:932 928 1120 AU # 0 updates detected
2014-07-22 12:16:00:932 928 1120 AU #########
2014-07-22 12:16:00:932 928 1120 AU ## END ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:16:00:932 928 1120 AU #############
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:00:932 928 1120 AU Featured notifications is disabled.
2014-07-22 12:16:00:932 928 1120 AU AU setting next detection timeout to 2014-07-22 08:15:22
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:05:931 928 a58 Report REPORT EVENT: {25E75367-1205-4F59-A812-02DA28BB3234} 2014-07-22 12:16:00:932+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 12:16:05:931 928 a58 Report REPORT EVENT: {FE1434F8-C6AF-4F87-B3DF-6E4D6C4B05FB} 2014-07-22 12:16:00:932+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 12:16:05:931 928 a58 Report CWERReporter finishing event handling. (00000000)
2014-07-22 12:30:05:116 928 a58 Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 12:30:05:131 928 a58 Report Reporter successfully uploaded 2 events.
2014-07-22 14:05:29:584 928 10a0 AU Triggering AU detection through DetectNow API
2014-07-22 14:05:29:584 928 10a0 AU Triggering Online detection (interactive)
2014-07-22 14:05:29:584 928 1130 AU #############
2014-07-22 14:05:29:584 928 1130 AU ## START ## AU: Search for updates
2014-07-22 14:05:29:584 928 1130 AU #########
2014-07-22 14:05:29:584 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:29:584 928 8e0 Agent *************
2014-07-22 14:05:29:584 928 8e0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 14:05:29:584 928 8e0 Agent *********
2014-07-22 14:05:29:584 928 8e0 Agent * Online = Yes; Ignore download priority = No
2014-07-22 14:05:29:584 928 8e0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 14:05:29:584 928 8e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 14:05:29:584 928 8e0 Agent * Search Scope = {Machine}
2014-07-22 14:05:29:584 928 8e0 Setup Checking for agent SelfUpdate
2014-07-22 14:05:29:584 928 8e0 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 14:05:29:584 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 14:05:29:600 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:616 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 14:05:29:631 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:631 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 14:05:29:631 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:647 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 14:05:29:662 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:662 928 8e0 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 14:05:29:662 928 8e0 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 14:05:29:662 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:662 928 8e0 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:662 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:694 928 8e0 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:694 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:709 928 8e0 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:725 928 8e0 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 14:05:30:037 928 8e0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 14:05:30:037 928 8e0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 14:05:30:053 928 8e0 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 14:05:30:053 928 8e0 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 14:05:30:053 928 8e0 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 14:05:35:630 928 8e0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 14:05:35:630 928 8e0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 14:05:36:411 928 8e0 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 14:05:36:411 928 8e0 Agent *********
2014-07-22 14:05:36:411 928 8e0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 14:05:36:411 928 8e0 Agent *************
2014-07-22 14:05:36:411 928 1360 AU >>## RESUMED ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:36:411 928 1360 AU # 0 updates detected
2014-07-22 14:05:36:411 928 1360 AU #########
2014-07-22 14:05:36:411 928 1360 AU ## END ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:36:411 928 1360 AU #############
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:36:411 928 1360 AU Featured notifications is disabled.
2014-07-22 14:05:36:411 928 1360 AU AU setting next detection timeout to 2014-07-22 10:01:01
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:41:410 928 8e0 Report REPORT EVENT: {6A2B180E-A95F-42F7-B775-5750DFFD6ECD} 2014-07-22 14:05:36:411+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 14:05:41:410 928 8e0 Report REPORT EVENT: {83041427-693D-4A42-AED0-E8E7BFB8E7E3} 2014-07-22 14:05:36:411+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 14:05:41:410 928 8e0 Report CWERReporter finishing event handling. (00000000)No Service Pack 1 installed. Does this mean that no updates will be detected if SP1 is not installed? thanks
That's exactly what that means!
Updates have not been available for Windows Server 2008 R2 *RTM* systems since April, 2013.
http://support.microsoft.com/lifecycle/?p1=14134
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I have a Windows server 2008 R2 and I'm using backup feature to backup all computers in the network on it. Recently I ran into an issue and had to re-image my Windows 2008 R2 server and had to restore 2 of my client computers but now I can't restore
files from my client computer backups because they are not listed under Backups & Devices anymore however all backup files are still available on my Backup drive. How can I retrieve files from these backup files?Anyone out there to help me with this issue?
-
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
IPhone 4S not connecting to Windows XP Pro
My iPhone 4S is not connecting to Windows XP Pro. I've already tried restarting my Apple USB Driver but it still will not connect. Any suggestions?
After plugging it into my computer for roughly the 173rd time in the space of 6 hours it randomly opened itunes installed 3 drivers and started working.
For future reference, what in gods name just happened? -
Ipod is not connect to windows or itunes but it still shows up on ipod
i had to re set my ipod the other day and ever since then it will NOT connect to windows of itunes but every time it shows up on the ipod that it is connected!
Welcome to the discussions,
try again to reset by holding the sleep and home button until the Apple logo comes up again. If still no luck, restore "as new ipod"
Restoring: http://support.apple.com/kb/HT1414 -
TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?
why doesnt my 5th gen ipod nano not connect with windows 8?
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
ITouch not connecting to windows or itunes, and will not charge.
Okay, so, I was charging my iTouch one day in my computer, and every time I plug it in, iTunes launches and then starts to automatically sync my iTouch, which I DO NOT WANT. Anyways, I quit the sync from itunes as I always do, but this time, when I tried to quit, nothing happened and itunes froze up. 1 Ctrl+Alt+Dlt later, I tried to end the program, it was being pesky so I had to try and end it a few times. My iTouch finished charging and I hane not thought anything of it since then. The day after that, I was trying to charge my iTouch before work, and I went to get ready while it was charging. I came back to an iTouch that was not charged at all. It does not connect to Windows or iTunes, but still for some reason retains enough battery to display the battery symbol. I have used the iTunes helper to try and guide me through the problem, but the steps I took did not fix the problem and I do not feel like taking my iTouch in to get serviced. So, in overview, my iTouch will not charge, connect to windows or iTunes, all after I ended iTunes from the task manager. My iTunes works just fine, my iTouch is the problem. I dont know what operating system it is running on, and I dont know how to update it, but it is at least 4.3.1.
P.S. I would love to get some speedy help on this. If its any reward, you have many internets up for grabs for answering my question. Over 9000 ^_^- Try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try placing the iPOd in recovery mode to see if that will make the iPod visible in iTunes so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
I didnot start my admin server here i am attaching the thread
awt.toolkit = sun.awt.windows.WToolkit file.encoding = Cp1252 file.encoding.pkg = sun.io file.separator = \ java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment java.awt.printerjob = sun.awt.windows.WPrinterJob java.class.path = C:\WEBLOG~1\patch_
-
I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?
-
NIC install problem under Solaris 10
I have an old 3Com NIC card (ISA) under Solaris 10. 3C509B Etherlink III card and prtconf -pv command shows correct PNP80f7 device id, all correct resources, IRQ, I/O address .... But fail to work. Is it sun does not support elx driver or something I
-
Hi I want to know how to customize the workflow settings? In Swu3, maintain background job for missed deadlines. Schedule background job with work item with errors. Schedule background job for condition evaluation.
-
Droid razr m still having promlems after kitkat update
My droid razr m still seems to be having problems. I am very frustrated since the update was in May and it is now nearly September. My Bluetooth cuts in and out. my apps sometimes will not open at all. my battery randomly drains for no reason. The