X-FI Elite Pro sound problems HELP PLEASE !!!!!!!

Message Edited by Nemurytorul on 04-0-20070:43 AM

I have tried several different power connections. Now I have connected a cable directly from the power supply unit.
Another problem that I have is that different games freezes my system after a while. I have tried World of warcraft and Guild wars and they both freeze after 5 to 60 minutes.
I had Audigy ZS 2 before without any problems at all and did a clean install with the new card.
The card is at IRQ 20.
I have a ATI Radeon X800 to. Is that the problem ?
Any suggestions ?
Message Edited by Mike_B on 0-3-2005 02:03 PM

Similar Messages

XFI ELITE PRO SOUND PROBLEM

Hello i was wondering if someone could help me. I have the Xfi Elite Pro sound card but when im playing a game or watching a film on my pc the computer will just freeze and i get these crazy high pitched screaching noises.Sometimes it scares the hell out of me when it happens it only happens when im watching films or gaming i have to reboot the pc to get it to stop does anyone have any ideas whats going on its like a really loud screatching noise. I have the latest drivers and tried old ones but still happens alot.Does anyone know what this could be thanks rich.

C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

NO SOUND PROBLEM HELP PLEASE!

i have a lenovo g580 and it has been owrking fine since i got it (christmas) until a week ago.
I turned on my laptop in the morning and i message pops up saying that it cannot connect to the dolby advanced audio driver, reinstall it if the problem persists. but startup sounds and youtube sounds would play, nothing else. so i turn it on the next day to fix it and there is no sound AT ALL. so i hover over the sound icon and it says no audio output device is installed. so i try to fix it day after day. then yesterday i turn it on and reinstall some drivers and stuff and now it says no headphones or speakers are plugged in and under playback devices, my speakers dont show up.
-Lenovo G580
64 bit operating system
windows 7
8GB RAM
someone please help

hi FunnyMar5ian,
Welcome to Lenovo Community Forums!
Here,
Make sure to un-install the Audio driver first under Device Manager
   > Open device Manager
   > Go to sound, video and game controllers
   > Look for Realtek High Definition Audio or High Definition Audio
   > Right click on it and select uninstall put a check on Delete the driver software for this device
Check you Control Panel / Programs and feature / Uninstall a program list for any Realtek Audio and Dolby Advanced audio.
Uninstall both
If non then just proceed to the next step,
Download and install this first
Realtek Audio Driver
0lau07ww.exe
187MB
After installation go to
Your Drive "C:" under My Computer then go to
               /Drivers
               /Realtek Audio Driver
               /PCEE4
               /DolbyAdvancedAudio.msi
Install the DolbyAdvancedAudio.msi.
Then Restart your computer and Check your sound.
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Solution to common Windows 7 Xfi Elite Pro installation problem

Solution to common Windows 7 Xfi Elite Pro installation problems Hello,? I have just solved what I understand to be a common problem when upgrading a machine with an Xfi Elite Pro from XP to 64 bit Windows 7. Apparently the console control software for the "older" PCI Soundblaster cards for Win7 isn't done yet. If you've installed Win 7, updated the product identification module and run the new driver that you can find easily on Creative's support site and you still have no sound, try going to the Control Panel in windows. Switch the display to the "small icons" option and select "sounds".
Choose the "playback" tab. You should find a list of possible sound output devices that exist on your machine. You need to highlight the Xfi on that list and then click the "Set as default" button at the bottom of the screen. That should do it for you.
It did it for me.

C The 'solution' you provided only touches a very small fraction of the problems with Creative sound cards. Only very unexperienced users may not control which sound card is choosen by their operating system. Many of us work with PCs for decades, being used to modify the registry and so on. The drivers of Creative are of an unexcusable low quality.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674

I am getting white screen of death on my Macbook Pro, can someone help please?

I am getting white screen of death on my Macbook Pro, can someone help please?

Intermittent or inconsistent situations as you describe are the most difficult to resolve. First step you should do is be certain that you have your data backed up. I suggest that you do this by creating a bootable clone using Carbon Copy Cloner. The advantage to this is that not only is it a backup but can immediately be used to run your MBP in the event of an internal HHD failure.
The article that I gave you to start your search contains a link to this article:
https://discussions.apple.com/docs/DOC-3353
Though lengthy, it can resolve most issues if you go through all of the sections. If you cannot achieve success, then an Apple store genius bar is the last option.
Ciao.

Adobe Flash Pro Sound Errors. Please Help.

I have been working on a kinetic type project for my Electronic Arts II class and an issue with the sound has come up. Every time I go to preview, the work I have done the sound from the song I have been using becomes misaligned. When I go to realign the text to match the lyrics of the song, it seems to work fine. If I preview it all lines up, but when I continue with the project to line up other parts of the animation, the whole thing becomes misaligned again. I have each line of the song separated into different layers and am using motion tweens for movement and to fade the text in and out. I also have the layer containing the song locked to prevent accidental editing. Despite these precautions to prevent accidental rearrangement, the animation never seems to line up for more than two or three playthroughs. This has become a great irritation because the due date is rapidly approaching and because of this error, I have been unable to get very far, and what little work I do have has been ruined. My teacher and I have done what we could to fix it, but have not been able to figure out this problem. Please help me. Any suggestions would be greatly appreciated.

if your sound is attached to a timeline, assign its sync property to stream.
also, set your stage frame rate at the sound's rate and export your sound with the best option selected.

The application logic pro quit unexpectedly (HELP PLEASE)

Hi there,
Logic keeps quiting unexpectedly when i try to open it...
it hangs at "intializing core audio" then quit..
I ve tried to erase "logic PM data" , preferences , restart holding alt apple p+r ,
disk repair authorisation but still not working...
can anyone help please...?
Tanx
Mac OS X (10.4.6) G4 733 MHz

Hey DATAMUZIK.
Are you opening Logic from the Dock/Applications folder? I had a similar problem when opening Logic, having worked on a project who's file had gone a bit 'wobbly' (my Logic opens up the project file that I have worked on last).
Try opening the application from an old project file that you've not had any problems with before, it might not work but will be worth a try.
Good luck,
Lou.
Emac 1.25 GHz Superdrive (Jan 2005) Mac OS X (10.3.9) 1G RAM, 80GHD & 80G Lacie, Logic Pro 7 1.0.1, FCE 2, iWork '05, Shuffle
Emac 1.25 GHz Superdrive (Jan 2005) Mac OS X (10.3.9) 1G RAM, 80GHD & 80G Lacie, Logic Pro 7 1.0.1, FCE 2, iWork '05, Shuffle

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Sound problem. help me pls

Help me pls i have hp pavilion dv 7 1125ea and i dont find my driver. Itry lick this.
1.install MS UAA
2.install IDT audio driver but this driver give me this error... the hardware detected is not supported by this idt software package. the install will be aborted....pls help me and sorry for bad english
I need for windows XP. Ty

Ordered system restore cd's. Restored back to factory settings. My sound problem is fixed. I hope this helps you out.

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

X-FI Elite Pro sound problems HELP PLEASE !!!!!!!

Similar Messages

Maybe you are looking for