X marks is blocking me from using firefox as soon as i open it up X marks pops up and freezes everything
I click on Firefox to open the browser then X Marks pops up on the screen tells me it is lading then it shrinks to a bar . I can't close it nor can I click anywhere on my screen with out my computer going bonk bonk and not doing anything i click on. How do I fix this I have gone into my program list to delete X marks but i can't find it. please help me so i can use my Firefox
Hi cjernigan-
Are you using the Xmarks addon for Firefox? [https://addons.mozilla.org/en-US/firefox/addon/xmarks-sync/ ]? I would suggest trying to download it again, and hopefully that will help sort out the problem.
Similar Messages
-
my antivirus(macfee) has blocked me from using firefox browser. how do i unlock it?
Several tried to but no one seemed to understand the real problem.
I COULD, because it was mine too. So it follows the only ultimate solution:
1. Open Firefox
2. On the address bar, type – about:config in the URL. Press Enter.
3. You will be warned about Warranty. Click on “I’ll be careful…”
4. On the Filter dialog box type – search.conduit
5. It will display all related entries. Right-click on Preferences Name and Reset.
It worked for me, after trying a dozen of "fake" solutions. ;) -
Why does Adobe Flash Player block me from using Firefox?
Every time I try to use Firefox, Adobe Flash Player blocks me from doing so.
I get continual messages that keep reappearing: """""""Adobe Flash Player 11.5 r502 has stopped working.
A problem occurred to make the program stop working correctly. Windows has closed... etc. """""""
This message just keeps re-appearing, and I can't do anything else by close out of it........
and then switch to another browser. I CAN'T USE FIREFOX.
I went in and downloaded the new version, just to make sure it wasn't being blocked by an old version,
but that didn't matter at all. It still blocks me out.
HELP!!!!!!! How do I stop this?
((((Note: I haven't been in here for over a year, and have no idea what email account you
have listed, or even how to find out. Thus, please send reply to: RogerHimesCoach at G mail dot com.))))
I know my username only.
RogerI'm sorry you're going through this. I suspect you're running into a conflict with our Protected Mode which was introduced in Flash Player 11.4. Please try the troubleshooting steps outlined in this FAQ:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue. If it does, please re-enable it and give our latest Flash Player 11.6 beta a shot. You can download it here:
http://labs.adobe.com/downloads/flashplayer.html
Thanks,
Chris -
I have run a virus scan, and there were no viruses or bugs found. I have uninstalled Foxfire, restarted my computer, and then reinstalled Foxfire again. This window continues to keep coming up and blocks me from using the web browser. What else can I do to get rid of it?
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.''' -
I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id
There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons, -
How do you block a website using Firefox 5.0
How do you block a website using Firefox 5.0
You can use a program such as [http://www.123blockme.com 123BlockMe]. It will allow you to block any website on Windows and it works with all browsers including Firefox.
-
I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )
There is nothing that anyone here on a user forum can do to help you. If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
Nobody here can help you. -
x husband blocked us from using face book and u tube on home computer.
what do I need to do to re istall it ??There is no reinstall process for facebook it is a website that you visit stored on servers far away from your Mac.
However, If you go to System Settings, then Parental Controls, you will however need to be logged in as Administrator or know the password. -
ISP is blocking us from using their smart host, they think we are spamming.
Our ISP is blocking us from using their smart host a few times these days. They told me that one or some of our computers were infected and spamming. I checked Trend Micro console, but have not seen any viruses so far.
We migrated from SBS2003 to SBS2011 a few days ago. And our ISP blocked us from using their smart host on the very next day. Ever since then, this has happened 3 times in a week.
If I use our own server to send out emails, some recipients will reject because of their spam filtering system.
Any thoughts, suggestions??
Thanks in advance!On your network firewall, you can block outbound SMTP (25) for all of your network systems and create an allow outbound SMTP (25) for your server. Thus if a workstation is trying to send direct to the internet your firewall should prevent the communications
but it will allow your server to send mail out to your smarthost. If your firewall can support unified threat protection, enabling such services will aid you in assuring yourself and your ISP of the clean bill of health for your messaging environment.
You can also force a password change on all of your user accounts as a preventative measure. If you were dealing with ISP mailboxes or an external provider, this would be where the vendor would start.
You should also be able to get support from your ISP; if they are blocking your connection they must have some information to work with that will help you narrow your approach. Another option would be to look into third party smarthost/sanitation services
such as Forefront Online Protection for Exchange which can certify your email and can allow you to bypass your ISP. Usually an ISP offers a free smarthost service but what you get in return is entry-level service, but if you pay for outbound smarthost
services, you get a service level and support agreement.
Hope that helps,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP -
Blocking neighbors from using my signal
I've recently noticed that someone has been using my signal to get online. Is there a way to block others from using my signal? I have two eMacs that are hard-wired to a di-614+ router. I have disabled the WEP and SSID Broadcast wireless settings but have not noticed any difference. Any help will be greatly appreciated.
Thank you.You indicate that your Macs are hardwired to the router. If you don't have any need for the wireless option, you can turn it off entirely. This is explained on page 11 of the manual that is available from the D-Link web site.
Matt -
Firewall Blocks me from using hostnames... and
I am running Mac OS X Server 10.4.9 I have setup AFP, Software Update, and Print. (also SSH, and Remote Desktop). When I turn on Firewall I cannot connect to ssh or afp using the local networks hostnames from the server.
ex. Server.local or PowerBook.local
I can only connect using IP's. The active rules on my ipfw are:
01000 0 0 allow ip from any to any via lo0
01010 0 0 deny log logamount 1000 ip from any to 127.0.0.0/8
01020 0 0 deny log logamount 1000 ip from 224.0.0.0/4 to any in
01030 0 0 deny log logamount 1000 tcp from any to 224.0.0.0/4 in out
12300 0 0 allow tcp from any to any established
12301 0 0 allow tcp from any to any out
12302 0 0 allow tcp from any to any dst-port 22
12302 0 0 allow udp from any to any dst-port 22
12303 0 0 allow udp from any to any out keep-state
12304 0 0 allow udp from any to any in frag
12305 0 0 allow icmp from any to any icmptypes 8
12306 0 0 allow icmp from any to any icmptypes 0
12307 0 0 allow igmp from any to any
12308 0 0 allow tcp from any to any dst-port 3283,5900
12308 0 0 allow udp from any to any dst-port 3283,5900
12309 0 0 allow tcp from 172.16.1.0/24 to any dst-port 427
12309 0 0 allow udp from 172.16.1.0/24 to any dst-port 427
12310 0 0 allow tcp from 172.16.1.0/24 to any dst-port 515
12310 0 0 allow udp from 172.16.1.0/24 to any dst-port 515
12311 0 0 allow tcp from 172.16.1.0/24 to any dst-port 548
12312 0 0 allow tcp from 172.16.1.0/24 to any dst-port 631
12312 0 0 allow udp from 172.16.1.0/24 to any dst-port 631
12313 0 0 allow tcp from 172.16.1.0/24 to any dst-port 3689
12314 0 0 allow udp from 172.16.1.0/24 to any dst-port 5353
12315 0 0 allow udp from 172.16.1.0/24 to any dst-port 626
12316 0 0 allow tcp from 172.16.1.0/24 to any dst-port 8088
12317 0 0 allow tcp from 172.16.1.0/24 to any dst-port 311
12318 0 0 allow tcp from 172.16.1.0/24 to any dst-port 625
65534 0 0 deny log logamount 1000 ip from any to any
65535 2848 308072 allow ip from any to any
When the firewall is non-active I can use local hostnames or IP's to connect to local clients. What do i need to open in the firewall? for hostnames to work when connecting to ssh, and afp?
Also when I port scan my server from out side my local network. it show's rules that are only avaliabe for the local subnet 172.16.1.x. like afp, Print, and software update. how do i change this to limit accsess to services?
This is a double header sorry about that. =)
Blessings,
Robert LaRoccaEven when you're using .local hostnames, your machine still uses it's NS resolver. Open up port 53 in the firewall and try it again.
MacBook Pro Mac OS X (10.4.8) -
When using firefox, I can no longer open attachments, pdf or downloads. A new window will open and it is blank. The only way to open an attachment or pdf is to shut down firefox and use safari. Everything works with safari so I can't understand what went wrong with firefox. I even download adobe reader thinking that would help. I then deleted my original firefox and re downloaded firefox again. It still doesn't work.
I am using a 10.6 operating system on my Mac.Try to disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file -
I have used Firefox for over a year. For some reason it quit working and I can't seem to fix it. I uninstalled and reinstalled the download and it's still not working. When I click on the icon it says unable to connect.
Yes, if you repurchase it you may lose your progress. The exception would be a game that stored all your progress on a server under your ID
If you want to retain your progress you have two choices:
1. Don't apply the update.
2. Use your fathers account password to update the game. -
OK..this forum help me locate my iPhoto so HOPEFULLY ya'll can help me w/ 1 another issue. When I open an event in iPhoto...I can see the pics but when I click on the event itself a HUGE exclamation mark pops up and not my pic. Its really weird that I can see the pic but cant open it. Hopefully we can correct this issue. Also, if anyone has the energy....pls tell me how I can export from my iphoto-I want to place all my pics on CDs or my external hard drive and when I try to export it says.."unable to export.." I dunno!
Help PLZZZZZ!
Lost again,
AmandaThe two problems are related.
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
And that's why you can't export as well.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)Open Containing Folders is never active.
Maybe you are looking for
-
MSI DK790 GX (non platinum) - Flashing bios
Hello there! First things first, please accept my apologies if my language seems wrong. I'm not a native english speaker, and do not hesite to ask to repeat. Second thing, i've read some similar topic but i'm still confused about how i have to flash
-
Network setup, help needed..
Since i am getting a new internet connection (100mbit glass-fibre) i want to make a perfect setup network. Since im not entirely sure how to set it up i ask for some help. First off, what i have on the network (or want to have): -Several Macs (100/10
-
Hi Experts, How to create the UDF in XL-Reporter. My B1 version is 2007B PL08 Glen
-
BPM Linking of two receivers?
I have a BPM process and I need to link the two receivers. I have the first message coming into the Process through Asynch Adapter (JDBC) the second Receive is not kicking off. Is there something I need to do to link the two Receive steps, using t
-
Just updated to 3.0, and I quickly noticed more options for the Contacts app, but every listing I had prior now has two listings each. At the top is "All Contacts" - Below that "from my Mac", with groups from my Address Book from my Mac and below tha