X11 between Macs
Has anyone run X11 programs between 2 macs over ssh ? Say Xterm , clock , xeyes, etc. If so what options did you use to start the ssh (-X) ? And/or did you edit the sshd_config file or others ? I keep getting the 'can't open display' error.
Dennis
Also, it's probably a good idea to ssh into the remote system from an X11 xterm window. Terminal won't know your X11 display ID unless you set the DISPLAY variable, and if you've got more than one X11 session running at once (under different user accounts), it can be tricky to guess what the desired ID is.
Similar Messages
-
Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26) -
Kernel Panic while transfering data between MAC HD and network drives
Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID: 3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.trendmicro.kext.KERedirect 1.0.0
com.trendmicro.kext.filehook 1.5.0
com.vmware.kext.vmx86 3.1.3
com.thursby.kext.cifs 5.1
com.thursby.kext.NetBIOS 5.1
com.apple.filesystems.smbfs 1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPort.Atheros9388 426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.1
com.apple.driver.AppleThunderboltEDMSource 1.1.1
com.apple.kext.ATI6000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions. -
Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?
I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
Regards,
Mahendra Panchal.Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
Toggle how? What are you doing? Why do you have the MacMini connected to the TV? That is the whole point of AppleTV. It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
it becomes an issue.
What does? What is the issue? What specifically fails or does not work? -
I am looking for a fool-proof way to share files between Mac 10.6 and Win 7
I need to share files BOTH WAYS between Mac OS 10.6 (latest rev - 10.6.3 at the time of this post) and Windows 7 Premium. Both computers are on a private network and both are on the same workgroup.
I followed this tutorial:
http://macs.about.com/od/filesharing/ss/file-sharing-with-snow-leopard-win7.htm
and I got part of the way there. This tutorial shows me how to set up sharing using the "Sharing" pref pane. I set up a few folders for sharing to specific users (me) from the PC. I set permissions properly, and enabled SMB. Everything was by the book (I have shared between XP and older macs in the past, this is not totally new to me).
For some reason, my Win 7 box is only able to see my public folder. I can set that folder (using the sharing panel in OSX) to read and write, so I can move files to and from it in Win7, but none of the other folders I shared on my Mac are available in Win7.
I am accessing my shares in Win7 like this:
\\192.168.123.130\Desktop
that's my Mac's static IP and then the Desktop is one of my shared folders on the Mac.
When I type that, I get an error in Win7 that says that folder is not accessible, and that I may not have permission. I am not prompted for a username/password at any point in the process.
the only way I am able to access the Mac's public folder is because I type "\\192.168.123.130" in Windows 7 and I am presented with a list of shared printers on my Mac and then the public folder. My other Mac shares are not listed there.
What am I doing wrong?
Oh, one more thing. Is there a good tutorial anywhere for sharing Win7 folders to my Mac? All the ones I have found are not working.
God, I really hate Windows sometimes.
Thanks
-----------SLAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
Still, only the public folder is visible.
By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
Message was edited by: Steve Dorsey -
Syncronising address book and Calander between macs
Hi
I have Mini Mac (Tiger), Macbook (Leapord) and Airport express. I want to keep the address book and calander syncronised automatically.
I do not have mobile me. I mainly use google mail.
Does isync help of howelse do I do it?
BadrakumarNo, iSync is for syncing Contacts and Calendars to third-party mobile phones and PDAs. It does not sync anything between Macs.
Apple's MobileMe is for syncing Address Book and Calendars between multiple Macs.
You might also be able to use Google's new CalDAV feature:
http://www.google.com/support/calendar/bin/answer.py?answer=99355&topic=13949
Or SpanningSync:
http://www.macupdate.com/info.php/id/24117/spanning-sync
Or BusySync:
http://www.macupdate.com/info.php/id/25922/busysync -
My home sharing continually fails between mac and apple tv 2.
my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.
Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test. -
What format i should use for my external hard drive that can be used interchangeably between mac and pc?
Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930 -
I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer. -
Is there a way to stop the text shifting between mac and pc?
I can't believe there is still no fix to the vertical text shift issue when transferring fla's between Mac and PC's. Create an fla on a Mac put some text in it, save the file and open it on a PC and see how the text has dropped.
Adobe please tell me I'm missing something here or at least acknowledge the problem and explain the cause.
This problem has plagued flash for as long as I can remember. None of the other applications (Photoshop, Illustrator etc) have this problem. It wastes huge amounts of time and causes massive quality control issues especially when outsourcing work.
We're using CS3 now and the problem is as bad as ever. It happens with all text fields and all font types.
Please help.Don't get your hopes up that anyone from Adobe will see your posting. These are user to user forums and appearances by anyone from Adobe are rare.
suggestions to Adobe - Wishlist
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform -
Share files between Mac and Windows in same iMac with boot camp
Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
EricHi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan -
Has anyone tried home sharing between mac and windows using parallels on the same machine?
I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!
In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.
-
Share filing between Mac and Windows Vista
Hello,
I am trying to file share my iBook and Vista.
On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
When I click on it it says:
The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
Delete Alias, Fix Alias , OK
I hit OK it does nothing
I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
I do not want to Delete Alias.
Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
I verified this by reading the support docs on the Apple website.
System Preference >>>Systems >>>Accounts >> verified and changed password.
Still no luck. Can someone give me some advice? Thanks!!There are more than a few threads on the topic across the web; so I guess a search
would be in order and some sorting of results to enable a wise choice from them.
There's also the Apple Help built into OS X and some ideas present themselves.
Firewall changes would probably be necessary, and the Sharing (system preference)
panel has some access settings for some of this sort of thing.
(The closest I have been to sharing between a Windows machine and a Mac, is when
I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
brought into my space and they temporarily shared a workbench. I found out what
was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
•Networking Mac OS X and Windows Vista - google search
http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
•File Sharing between Mac OS X and Vista - google search
http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
•Networking Windows Vista and Mac OS X - google search
http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
•File Sharing between Windows Vista and Mac OS X
http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
edited. -
8 hours time difference between Mac OS & Windows XP for Macbook
I got my macbook yesterday. Next to the problems I've heard before,today I found that the time for MAC OS is always 8 hours before the time in Windows XP no matter how I adjust the time zone. I've tried many ways, but found no way out. Is there somebody else can give me some tips. Tks!
I got my macbook yesterday. Next to the problems I've
heard before,today I found that the time for MAC OS
is always 8 hours before the time in Windows XP no
matter how I adjust the time zone. I've tried many
ways, but found no way out. Is there somebody else
can give me some tips. Tks!
Official answer
http://docs.info.apple.com/article.html?artnum=303572#faq1
Why is the time different between Mac OS X and Windows XP on my computer?
The Windows XP and Mac OS X operating systems handle your computer's date and time information differently, so the date and time may be different when you switch operating systems. For best results, use a network time server and resync the date and time whenever you switch operating systems. In Mac OS X, use the “Set date & time automatically” option in the Date & Time preferences. In Windows XP, click the Update Now button in the “Date and Time Properties” control panel.
Nice solution
http://discussions.apple.com/message.jspa?messageID=2378497#2378497
"I found a better solution to this whole thing. The problem with the Windows clock being off is because the hardware clock (the one on your actual motherboard) is being set to "Universal" time, or GMT, when you shut down your MacOS bootup. When you boot Windows, Windows assumes your clock is set to your local timezone because that's what Windows does by default. This explains why the people who set their MacOS clock to GMT got the right time in Windows... If the hardware clock is being set to "GMT," when it's actually the local time, Windows will pick this setting up as local time as it did before.
To fix this, you need to add a key to your Windows system registry to tell Windows that your hardware clock will always be GMT.
* WARNING: Editing your registry improperly can render your Windows installation inoperable. Proceed VERY carefully. I am not responsible if you mess something up. *
The short solution for people who know how to edit the registry:
A DWORD key called HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation\RealTimeIsUniversal needs to have the value of "1"
The step-by-step solution is as follows:
1. Boot Windows
2. Click Start --> Run and type regedit. Click OK
3. The Windows Registry Editor should pop up. Navigate within the explorer to:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
4. Click on the TimeZoneInformation "folder" from the navigation pane if you haven't already done so.
5. This assumes the correct key doesn't exist. If it does, you will just change the existing key's value: Right click on the white space within the folder (If you don't have a right mouse button, you may need to download a program called applemouse to emulate the "control-click" of the apple 1-button mouse). Select new --> DWORD Value. Title the key "RealTimeIsUniversal" (No quotes). Set the value to "1" (No quotes again). Hexidecimal should be fine.
6. Either reboot and set the clock in MacOS or set the clock in Windows. You should now be able to reboot into either OS and have a correct clock."
iFelix -
What is the best way to share a specific folder between macs????
Hello, I would like to share a specific folder between macs, heres what I need to do:
1) share one folder that resides in my home folder
2) the other mac should be able to view it without any login information (no password etc)
How? What is the best way?aapl.up wrote:
Rick, are you saying that if you try to share a folder outside of home and use sharepoints, then the other mac wont prompt you to log in? Have you tried that? It is hard to believe that is the case
I am sort of saying that. Have you tried it? I know it's hard to believe, but you really need to help us out by trying some steps that you don't believe.
We can't see what your exact situation is. We sort of know what's worked for us out here. Just trying to help you get this going in less than 24 hours!
Sharepoints manages the samba configuration file. It's free software that puts a pretty face on an otherwise cumbersome config file.
Give it a shot.
windows will not prompt for passwords, I have tried this with multiple computer at home for both vista and xp
As I stated. You will not get prompted on windows, if you have set up sharing in an insecure fashion. You are not using a secured sharing situation.
No argument with your statement.
Maybe you are looking for
-
Can't install Vista through Parallel
When I tried to install Vista through parallel I recieved the following error: "This computer is not compliant with the Advanced Configuration and Power Interface (ACPI) standard. Windows must be installed onto a computer that supports ACPI. Contact
-
I am trying to assign same varible to Field and corresponding text filed. But it is not allowing as it same duplicate field . All though I have done that for couple of screen elements. Please share your thoughts.
-
Req. settings in R/3 for Sales and Distribution
Hi Friends, Do we need to do any settings in R/3 for Sales and Distribution implementation?. If so please give me some info. Regards RogerS
-
For full document retrieval and inserts is there a performance difference between declaring a XMLType or a simple CLOB database column type in table. Thanks in advance.
-
I'm in desparate need of some help. Up until now I've done "basic" web pages and uploaded html web pages to FTP sites with no problem. I am currently working on Catalog web site and am using ASP Javascript. I was told those were compatible with IIS s