X3-02 RM-639 v7.51 fw not seen from Nokia update
Why does the 7.51 version firmware not appear from within the Nokia Suite as an available update? x3-02 RM-639 here currently at v5.65.
Updates vary by region and product code and operator handsets,which may be locked and in most cases you are left waiting,
Contact your provider if your handset is locked and ask them.After that you may just wait.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Similar Messages
-
I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera). However, it will not download from the "Update" option in CS6. I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade. HELP please.
What OS do you have? You say you have explained what you had (computer/opsys) but I honestly don't see it here. If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system. There is more information here (look specifically for the "Revert to 8.3 ..." titles).
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
What you've done/written in your last post confuses things further, unfortunately. Photoshop 13.1 is strictly a Creative Cloud version. The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
And as far as I can recall, that version can work on Windows back to XP:
System requirements | Photoshop
I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
Here's what I suggest you try:
1. Remove Photoshop entirely with the Creative Suite Removal Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
2. Install Photoshop CS6 from your original media or from here:
Download CS6 products
3. Update the application using its own Help - Updates process. That really should get you the latest Camera Raw version that will work. If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
-Noel -
C1-01 not working after Nokia update
Hi,
C1-01 not working after Nokia update.
Message shows "Updating" then blank screen, any ideas?How did you start the update? OTA or using Nokia Suite?
Try to run the update through Nokia Suite again.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button. -
HP Driver "Can't install because it is not available from Software Update Server"
Proplem: Can't use my HP Officejet 6500 E709n on my MacBook Pro, even using USB connection. I click on sign, get add printer window showing the HP 6500 printer as USB Multifunction. I select and press 'add'. I get 'setting up ...' window. After a while I get the error window, "Can't install the software for the HP Office jet 6500 E709n because it is not currently available from Software Update Server." Only option is cancel.
HP site says that it supports Mountain Lion and the only way to get the driver is through Apple's Software Update.
Apple's site says Mountain Lion supports HP 6500 printer.
The Windows 7 computer on the netword prints fine to it.
I would really like to get this connected. Does anyone have a clue why the driver is not on the Software Update Server what the fix is?
Thank you for the help.Fantastic, Mene1 & John. Thank you. I deleted the HP Folder, deleted trash, reboot, and reinstalled. USB installed like a charm. Was able to print and scan. I even noticed that the Fax printer came up for both USB and 192.168.1.65. I installed the fax printer for the network and it works great without USB.
However, the network for the printer never showed up in the list. I tried IP option and entered the address. It correctly identified the printer in the "use" field. However, when I click on 'add' is has a window that says, "Unable to verify the printer on your network. Unable to contact to '192.168.1.65' due to an error. Would you still like to create the printer?" I choose Continue, and it creates the printer. Printing, it just sits there trying to connect with the printer. Again, the printer is hardwired into my home network and I am using my AT&T U-verse Wi-Fi connection to my MacBook Pro (which works for Fax on the printer).
Any ideas? -
Secure storage not seen from configtool and Portal not starting
Hi,
My Portal is not starting. The dispatcher and sdm are starting,but server0 is not able to start.The exit code displayed was -11113.
I checked up the log files and the error displayed was :
No active user store set.
I opened up the Configtool , and the secure storage node and ume ldap storage node are not seen at all.
Here is a what was found in the trace file:
<b>#
#1.5#000180522ADA001E0000000A000017A4000408D055EC5E0A#1135590794609#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_58##0#0#Error#1#/System/Server#Java###Core service security failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:186)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:98)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
at com.sap.engine.services.security.server.jaas.LogonInfoLogger.update(LogonInfoLogger.java:322)
at com.sap.engine.services.security.server.jaas.LogonInfoLogger.<init>(LogonInfoLogger.java:57)
at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:54)
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:146)
... 5 more</b>
Can anyone explain how I must solve this problem.
(People who answer the question will be richly rewarded)
Regards,
HarishHi Harish,
Check whether your SecStore.properties file exists in <SID>\SYS\global\security\data folder. If not, place that file from the backups you have.
Regards,
Siva
P.S: Award points if you find this useful. -
Organizations are not seen from Application R12
Hi,
I have installed R12.1 Fresh Database in my laptop and its running fine. I created Location, Organization and Organization classification using HRMS super user responsibility. When I opened the organizations window the organization that I created is not seen but they are stored in database. Is there any setup that I am missing?
Thanks in advance.Hi,
To access UK SHRMS Manager I changed the profile value for UK SHRMS Managers responsibiity. I choose "HR User" value at Responsibilty level for "HR User Type" Profile.
Then I created location.
UK SHRMS Manager>Work Structures>Location
Then I created Organization
UK SHRMS Manager>Work Structures>Organization>Description
I classified this organization as Business Group.
I closed all the windows. When I tried to query the organization that I created, only the default Business Group (Setup Business Group) is seen. But I can see all the organizations that I created in the database.
I hope this will give you some idea to fix my problem.
Thanks in advance -
Wired network in office not seen from relay base station side
After a number of false starts I have a wireless set-up between my office and a remote location. All five Macs in the office are wired to a router which is wired to the cable modem. The Airport base station in the office is connected with the the WAN port to the router. Base station is set up as a WDS.
The remote base station is set up as a relay base station and WDS and we go wireless between it and the Mac at that location.
While I have a fast internet connection from the remote location, I expected to see the 5 Macs in the office and be able to connect to them. I don't.
What settings must I play with to be able to connect to Macs in the office? I might note that I don't see the remote computer from the office either. So the problem is both ways.
TimMy question was answered on this other discussion list:
Getting Online and Networking
Thanks. -
Printer shared from my Mac is not seen from a PC using Bonjour for Windows
I am going nuts here, hope someone can help.
I have a Canon multi-function printer (MP830) attached via USB to a Mac G4 (with Mac OS X Tiger). At one time, I had it set so a Windows 2000 PC could print to it but deinstalled it after some printing issues, and have been unable to get to working again. The machines are connected together via a Netgear router. As far as I know, everything is the same as it was before, yet I cannot get it to work as it did.
- The printer works fine from the Mac.
- If I connect the printer to the PC, it works fine.
- On the PC, using Bonjour for Windows, I cannot see the printer attached to the Mac but I can see, and print to, an Epson printer that is attached to a different Mac.
- And from the second Mac, I am able to see -- but not successfully print to -- the Canon printer. The print job stays in the queue of the second Mac and says "Unable to connect to SAMBA host, will retry... Error: Connection failed with error."
- I have tried:
-- de-installing and re-installing Bonjour for Windows and the Canon print drivers on the PC
-- and have de-installed and re-installed the Canon drivers on the Mac
-- I have removed and re-added the Canon printer on the Mac. Printer Sharing is on, and this printer is checked in the Sharing box.
Any suggestions?
G4 Quicksilver and Dell PC with Windows 2000 Mac OS X (10.4.9) Canon MP830Thank you. Those are beautifully written procedures.
Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
You must enter the following URL, you must use the Queue Name you noted down earlier
http://<IP address of Mac>:631/printers/Queue Name
which I do, entering
http://192.168.0.4:631/printers/MP830
and I get the following error:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
And then I am toast!
Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
Not sure where to go from here -- any ideas?
The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
TIA... -
Recently stated by nokia
As for X7/E6: they are getting updates (PR1.1 is already in the pipeline and distributed as we speak) - but as I've stated we are not doing a big activity on those and I'm therefore not tracking them. If you are interested in those, switch on the software update autocheck in your phone and let it tell you as soon as it becomes available.
Here we see AGAIN nokia customers been let down and tossed aside like an empty can.
We where told nealry two weeks ago that the update for anna is available in ireland/uk.
From what im reading and hearing on irish networks be it sim free or not, a handfull and i mean a handfull of people have been able to update.
Why show lack of support for ireland/uk and the US. And leaving another batch of customers(current X7/E6 users) lagging behind.
Nokia should be supporting ALL variants,ALL regions and ALL countries.at ALL times.
As it stands we are still seeing ANNA been released in dribs and drabs.almost half way into september.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520vsigma wrote:
The point that Jimmy (and others I might add!) are trying to make is this:
Nokia has promised an update by a certain date a while back for Anna for everyone. They couldn't deliver. Users are now questioning why they, Nokia, promised something that they couldn't deliver, or *KNEW* that they couldn't deliver by that time frame, and simply *&^#&@%! bad PR moves by a company that which they love(d) products from.
@jraduga - you seem to be almost trying to do damage control FOR nokia's bad PR decisions on this forum based on the posts that you have thus far. Yeah - some people should chill out about this whole update. Heck, as a former Nokia loyalist - I would be freaking about it too. See, people wouldn't have cared or worried about this whole Anna business if Nokia didn't just randomly decided to tease folks about from Feb on. Heck, I am more than positive that most users would still be 99%+ content if they hadn't know about the whole Anna+Belle update is coming!
But the point is that Nokia promised and couldn't deliver. If they know they can't deliver - then stop teasing the user base and getting them annoyed. They're better off hammering it out throughly and then just releasing it quietly. It's not like they've sold *millions* of these particular batches of smartphones that *ALL* their servers would crash assuming that all of them attempted to update simultaneously. Nokia *KNOWS* that with their regional product code sets that how many devices are actually being used with every query from the device asking for an update from the previous smaller updates. They could easily do the math and determine what kind of server response they would need to have ready to dish out such an upgrade!
But then again, I'm speaking from a logical software/hardware management update schedule. Based on their previous trackrecord with other devices.. i'm not so sure it applies, and why Nokia wonders why their userbase is shrinking...
Ok so nokia is not perfect I've not commented either way on what has been said by them in regards to the promises made early in the year. Many companies that are releasing software or firmware based product fall behind. there is other phone manufacturers, one in particular
that are currently more than 9 months behind on their expected release date, but you know what i dont see people on their forums jumping up and down like those on here.
In regards to this point only, as far as I am concerned a general statement would be a better option for companies like these such as " we are currently working on a new release of ... and we believe it will benefit our customer base because of ..." something to keep interest in the company and the products without creating an unreal expectation of delivery timeframes.
I agree with you if you let it just slide thru the system then most people would be happy when they saw that they have an update, as opposed to waiting and expecting, which you will see that commented on in another post. The thing that gets me is that regardless of what was said as far as time frames, the release is happening, and yet people are still jumping up and down when it has been clearly explained that it being rolled out and that timeframes for each country or product code cannot be given until agreements are signed off and it is released. It been said over and over again, and yet they are still asking. Jimmy is concerned that his recently released x7/e6 is not getting some updates that he thinks he should be, so he is jumping up and down, when he 2 has been told only yesterday that roll outs are happening but that skyee is not tracking these herself as she is concentrating on the anna roll out. I truely dont care what promises were made or who teased who. we are not kids here. We are talking about roll out that are happening as we speak (or type lol), cant people show a little patience when they see things happening. cant people like jimmy whose phone has only just been release handle having to wait for a short time. What even gives him the impression that his phone even needs an update. This discussion is not about who said what 8 months ago or how long people have had to wait till it started to be rolled out.
Its about people demanding and constantly asking for things that they have already been told the answer to. I can understand frustration, i have used nokia products for more years than i care to remember and have been waiting for the release of the E7 in australia since it was first announced, even when it was available overseas for months before we got it here. All because the carriers had to agree with it and sign off on it after changes were made etc. when my old phone was dying more every day, when i could only be heard on it, if i used a bluetooth headset cause the mic wasnt working towards the end. but that little E90 hung on for me and even with all the faults that were going on with it, I was still able to use it and get all my details across to the E7. But did you see me on here complaining or whinging NO you didnt.
I can certainly undertand why the world has wars all the time. no body has any patience, as you would have seen in my other posts i'm from australia, we dont have the anna update and may not have it for a month. As you may or may not know Australia is about the 2nd largest market for smart phones in the world, and Nokia is still huge out here and yet we still dont have anna but how many of us do you see complaining, a couple here and a couple there. So what is it about the rest of the world that they all need to complain about it even when they have been given the answers they need.
They all defnietly need to chillout, if they cant and feel so strongly about it that they fill like they need to change their phone, then dont whinge about it, just do it. nokia will learn one way or another, if you all just leave then someone will have to ask questions. Soemtimes the loudest voices are the queitess ones. Cause when there is total silence people will start to listen. In the mean time read the posts, understand the posts and DONT keep asking the same questions over and over again when you have been told the answer!!! -
Software not available from software update server
I have a MacBook Pro, mid-2009, 2.53 GHz; 8 GB memory, running OS X 10.9 (13A603). Yes, I upgraded to Mavericks just this afternoon. And now I want to use Boot Camp to install Windows 7. This is the first time I've tried to do this.
I read through all the information I could find about using BCA. I know my machine won't run Win 8, so I'm going with Win 7. I finally found a thumb drive that was big enough for the job and reformatted it. I launched BCA, and it headed for the download thing. But then it hit a snag: a little error box that reads, "Can't install the software becase it is not currently available from the Software Update server."
I have no idea what that means, so please ... someone tell me what to do next. Please, please don't tell me that I can't get there from here.
For what it's worth, my machine started out running Snow Leopard, and I've dutifully upgraded every time a new OS comes out.I got past this problem with help from another post in this forum. Now I have another problem: an error that interrupts the partitioning. I'll ask about that in a new post if I can't find an answer here.
-
N95 not seen by nokia products
My problem is that no nokia software can see my phone
I use winxp sp3 up to date
neither my phone, nor my wife's one are seen by nsu or pc suite whereas windows sees them
i've tried on different computer with the same conclusion
with fw or wo, with antivir or wo...
i've tried to de-install and re-install software, the same
any idea ?just for the sake find the firm ware version by *#0000#
is it a true nokia device......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos. -
Email not Sending from Nokia Email (E7) - anyone e...
On precisely 1st April my Nokia e7 (on 3 (UK)) stopped sending email. I've tried configuration using both smtp2go.com (a general smtp commercial gateway with wide access) and with my ISP "traveller" SMTP configuration. None of it works.
There isn't a connectivity problem with the ISP as the email is downloading fine - but it won't send.
Is anbody else experiencing the same problem because I think it's an issue with Nokia's own servers rather than the mobile network I'm on?Have you tried this smtp setting: smtp.three.co.uk ?
-
New installations not pulling from Adobe Update Server?
Hello,
I have an Adobe Update Server v3 running on a Mac 10.7.5 that is working fine for 5 Macs in our office.
This weekend I nuked one of the Macs and installed the OS fresh as the machine was having terrible crashing problems.
After installing the OS fresh and installing all OS updates, I
- downloaded the Creative Cloud App and installed it
- put the overrides file where it needs to go.
But all the Apps still pulled from Adobe's servers instead of our own. Is this by design? Is there something different I need to do for initial installations so I don't kill the internet bandwidth and my sanity waiting for the downloads to happen?
Thanks,
-JohnHi @keatonj
I am nearly certain we can fix this quickly!
Please leave the printer on and unplug the power cable, then shut down the computer for a minuter, please do don't do a restart, do a full shut down. Then plug the printer back in, turn the computer on add the printer!
I trust this will do the trick
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Every time I manually ask computer to go see if there is any new update after several seconds it will come back and say that I'm up to date. I am skeptical that I am up to date. Is there a way of checking a log somewhere in the computer that will show me if indeed I''ve been taking software updates all 2013?
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
RAID disk not seen from WInPE boot
Dear all,
We have a system with 3ware raid controler card configure as RAID1.
We are trying to build a standard Windows server 2008 image that can be installed in any System, by providing a system dependant unattend.xml file.
As a test first I have generate an unattend.xml file using WAIK. Then I have generate a WinPe boot disk.
When generating the WinPE boot disk, I have follow this procedure in order to add to WinPE boot my Raid controler driver:
http://www.windows-noob.com/forums/index.php?/topic/2349-guide-adding-drivers-to-a-custom-winpe-30/
The problem I have when booting from WinPe and listing volumes from DISKPART is that I cannot see my Disk mounted as RAID 1.
Any idea what can be wrong ?
regards
serge
Your knowledge is enhanced by that of others.Hi Serge,
Can you please post how did you resolve the issue? I am having similar issue here & I am unable to see the Disk Drives in WinPE 3.0. I have 2 3TB Hard Disk Drives connected & it needs Intel RAID drivers to load to see the drives in DISKPART "List
Disk" command. I used drvload.exe & it shows success but actually it didn't load the drivers & I am unable to see the drives.
But interestingly I am able to load the RAID drivers manually in Windows 7 Setup screen.
Please help me to load the drivers in WinPE.
Thanks,
Sourav D Gupta
Born to Learn
Maybe you are looking for
-
How do I save a Report to file using Report Generation vi's?(not HTML)
Hi, Sorry about re-stating the problem. I am using the Report Generation vi's to create a report. There is an option to save HTML reports to file, however I must use Standard Report because I need to print in Landscape mode. HTML reports will not p
-
Best Practice Questions: Method signature for CRUD operations
Hi, I am reading a book about EJB3.0 which has been very helpful to me so far. However I now find myself in a dilemma which is not clearly covered in the book and I would really like to know how best to proceed. In the book it says that an Entity Man
-
PLEASE HELP Lightroom 5 assertion failed.
I followed the below fix and still get assertion failed Open Windows Explorer. Go to C:\Users\[your user name]\. Check for the folder named Pictures. If you don't see the folder, create a folder named Pictures under folder C:\Users\[your user name]\.
-
I have Mac OS X 10.6.8 and I need to update my iMovie, but it will not let me because I need version 10.7.4 or later. I tried downloading this version but it would not let me because I need 10.7. My question is how do I download 10.7 in order to upda
-
new itunes up date will not down load says i have older version bonjour can not be removed tried removing bonjour with revo uninstaller takes bonjour off but then my internet will not work