X509 Cert Authentication Scheme - 403 HTTP Error

The user is been thrown a 403 HTTP error as part of this configuration to support X509certs.
Environment is OAM 10g running on Sun One Web Server6.1 and Solaris 2.8 O/S.
Any pointers on troubleshooting this issue ?
Thanks in advance.

This generally points to a certificate trust or certificate revocation issue. I have a bunch of questions that might point you in the right direction.
1 - Does the web server trust the CA that issued certs to the clients?
2 - Does the user certificate have a CRL Distribution Point?
2a - If so, can the web server follow this CDP to ensure the user cert is not revoked?
3 - Is the user cert revoked?
4 - Does the server cert have a CRL Distribution Point?
4a - If so, can the user browser's follow this CDP to ensure the server cert is not revoked?
5 - Do the clients trust the CA that issued the cert to the web server (not likely a cause)?
6 - Does this happen to all users or just one? (if it only happens with one user then that user's cert is likely revoked).
FYI - this isn't a OAM issue really, it's a mutual SSL client / server authentication issue between your web server and your browser. You should also check the web server docs, these may point you in the right direction.

Similar Messages

Apex Custom Authentication Schema Page Sentry Error

Hi,
I am using Application Express 4.0.0. I am struggling with a strange problem while trying to implement custom authentication schema.
I declare a page sentry function 'page_sentry' which returns TRUE or FALSE based on certain conditions. My page_sentry is as follows:
FUNCTION PAGE_SENTRY RETURN BOOLEAN
IS
l_username VARCHAR2(512);
l_session_id NUMBER;
BEGIN
IF USER != 'APEX_PUBLIC_USER' THEN
RETURN false;
END IF;
l_session_id := wwv_flow_custom_auth_std.get_session_id_from_cookie;
-- check application session cookie.
IF wwv_flow_custom_auth_std.is_session_valid THEN
apex_application.g_instance := l_session_id;
l_username := wwv_flow_custom_auth_std.get_username;
wwv_flow_custom_auth.define_user_session(
p_user => l_username, p_session_id => l_session_id);
RETURN true;
ELSE
--redirect to login page using OWA_UTIL.REDIRECT_URL
END IF;
RETURN false;
END page_sentry;
And Cookie Name : _AUTH
At first, It always returned FALSE. I wasn't getting any error. However, even after forcibly returning TRUE from the page_sentry function the redirect was still not happening. I tried to look into what cookies were being set for the same and I found this:
Name: ApexLibErrorStack1
Content: page%3D1%3Cbr%20%2F%3EERR-1201%20session%20ID%20not%20set%20on%20custom%20authentication
I couldn't find any relevant help for this. Worst of it is I cannot set any cookie from the page_sentry function at all. Please help!

Hi all.
Can someone please help me out with the above issue. I am not sure if things are wrong at my end or is this an apex bug.
--Update:
The source of my problem perhaps lies in the manner in which I have configured my Oracle HTTP Server. When I disable port HTTP server on port 80 and run apex without it on default port 8080, the custom authentication schema cookie gets set.
Executing the following with Oracle HTTP Server:
OWA_UTIL.PRINT_CGI_ENV;
gives:
HTTP_COOKIE = ApexLibErrorStack1=page%3D1%3Cbr%20%2F%3EERR-1201%20session%20ID%20not%20set%20on%20custom%20authentication.; ORA_WWV_R1=%23ALL; ORA_WWV_R2=%23ALL; ORA_WWV_R3=%23ALL
And without HTTP Server:
gives:
HTTP_COOKIE = WWV_CUSTOM-F_1420403886791332_100=9625AAC49B9951D8;......
Did I miss something in my HTTP server configuration ?
Edited by: pc on Jan 2, 2012 3:15 AM

WebService Proxy and x509 cert. authentication

Does anybody know if JDeveloper 10.1.3 generated WebService proxy by default is trying to use wallet other then keystore?
We have generated a web service proxy and trying to make a call to a WebService over SSL to the site which require x509 certificate.
Setting up keystore properties like :
System.setProperty("javax.net.ssl.keyStore","c://temp//keystore/myKeystore.jks");
System.setProperty("javax.net.ssl.keyStorePassword","password");
does not have any affect. And debug shows the following:
{Thread-10} [1:42:59.187] URLC: (https:twss.trac2es.transcom.mil:443) Connecting ...
{Thread-10} [1:42:59.187] Conn: Creating Socket: twss.trac2es.transcom.mil:443
{Thread-10} [1:42:59.328] Conn: using SSL version Oracle
{Thread-10} [1:42:59.390] Using wallet:
{Thread-10} [1:42:59.437] Conn:
And then shows the errors:
{Thread-10} [1:42:59.437] Unable to connect to URL: https://twss.trac2es.transcom.mil/trac2es-pmr/WebServicePmrSoapHttpPort due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
Any help will be apreciated
Alex

Bruce,
We are trying to setup X509 Client Cert to involve CAC(Smart Card) processing as a part of the initial part of our Jdev 10 or 11g app utilizing jsf/toplink. We are running OAS 10.1.2.0.2 presently but we can move to OAS 10.1.3 or OAS 10.1.4 without any problem.
I am hearing a lot of references to Jdev and creating the WebService.
Do you know if I am better off using what comes with OAS for the authentication or using Jdeveloper? If there is any good document you can refer me to we'll greatly appreciate it.
Thank you in advance for your response.

Custom 403 http-error page

Hi,
one of our http-server-listener is running with ssl-client-certificate-required. If the client doesn't send its certificate to the server, we get a message:
"Forbidden
Your client is not allowed to access the requested object."
How can we customize this error message? We use AppServer 8.1
regards Jonathan

You have to either modify appserver's "config/default-web.xml" or your web application's "web.xml".
Here is an example:
<error-page>
<error-code>403</error-code>
<location>/myapp/403.html</location>
</error-page>

OfficialFile.asmx The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. ERROR

We are getting an error on the authentication piece when trying to submit a file to the OfficialFile.asmx web service to submit a document to the Drop-Off Library. Here is the code snippet -
public string FileUpload(HttpPostedFile FileInput, RecordsRepositoryProperty[] properties)
string strFileUrl = string.Empty;
RecordsRepositorySoapClient repository = new RecordsRepositorySoapClient();
BinaryReader b = new BinaryReader(FileInput.InputStream);
byte[] binData = b.ReadBytes(FileInput.ContentLength);
repository.ClientCredentials.Windows.ClientCredential = new System.Net.NetworkCredential(iUserID, iUserPassword, iUserDomain);
repository.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
repository.SubmitFile(binData, properties, null, FileInput.FileName, HttpContext.Current.User.Identity.Name);
strFileUrl = repository.GetFinalRoutingDestinationFolderUrl(properties, null, FileInput.FileName).Url;
return strFileUrl;
Although we are setting the network credential in the client call we still get the error
- The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'.
Ideas?
Thanks in advance.

Hi,
Based on the error message, the issue is related to the authentication type.
I suggest you can specify the credential type like the below:
CredentialCache credentialCache = new CredentialCache();
NetworkCredential credentials = new NetworkCredential(UserName, PassWord, sDomain);
credentialCache.Add(new Uri(recordCenterUrl), "NTLM", credentials);
Here is a detailed code demo for your reference:
http://blogs.msdn.com/b/mcsnoiwb/archive/2011/06/06/sending-files-to-a-record-center-using-the-sp2010-webservice-officialfile-asmx.aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

The HTTP Request is unauthorized with client authentication scheme negotiate - MDS Excel Plugin error

Hi,
Some users in my company are experiencing a strange issue when connecting to our MDS server using the MDS Excel plugin. They receive the error message:
"The HTTP Request is unauthorized with client authentication scheme negotiate. The authentication header received from the server was "NTLM,BASIC real="DOMAIN NAME IWA"
They are receiving this error when first trying to connect. For some reason they only receive this error when connected to the work network via the VPN. They don't receive this error from within our network.
Does anyone know what might be causing this issue and how to resolve?
Many Thanks,
Phil

Try the following links and see if it helps:
https://support.microsoft.com/en-us/kb/896861/
https://social.technet.microsoft.com/Forums/projectserver/en-US/912c7179-8858-4c48-a71d-d9a21ff10a1b/the-http-request-is-unauthorized-with-client-authentication-scheme-ntlm-the-authentication?forum=project2010custprog
-Nithesh Shetty Software Engineer, C & E -> IMML -> MDS, Microsoft.

HTTP Error 403.16 - Forbidden, Your client certificate is either not trusted or is invalid.

Dear Experts,
I have tried mutual authentication with sample website as per below link:
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
1. Created a Root certificate, client and server certificate based on this root certificate by using Makecert command as per below link:
2. Import these certificates in Trusted Root Certification authority of both the stores (Local and Current user)
3. Created a sample website with HTML page
4.Hosted this website in IIS with HTTPS binding and selected the above server certifcate
5. Enabled "Require SSL" and selected "Require" under SSL settings of website
6. Exported the client certificate in base64 format --> Edited in notepad --> made the key into single line
7. Placed the above key under Configuration editor --> system.webServer/security/authentication/iisClientCertificateMappingAuthentication --> one to one mapping with user credentials.
8. I tried to access the website
But, I ended with below error :(
HTTP Error 403.16 - Forbidden
Your client certificate is either not trusted or is invalid.
Detailed Error Information:
Module    IIS Web Core
Notification    BeginRequest
Handler    ExtensionlessUrlHandler-Integrated-4.0
Error Code    0x800b0109
Requested URL    https://localhost:443/
Physical Path    E:\SampleRoot
Logon Method    Not yet determined
Logon User    Not yet determined
Could you please let me know what I missed here.
Note:
I am using windows8, IIS8.0.
Thanks in advance.
Regards,
M. Prasad Reddy.

Hi Prasad,
As per this case, I have been shared the corresponding details below
1.First of all,make sure that you import the certificate whether it belongs to Trusted RootCertification or not .
    If that is the case ,Goto Microsoft Management Console (MMC), open the Certificates snap-in.
    For instance, the certificate store that WCF is configured to retrieve X.509 certificates from, select the Trusted RootCertification Authoritiesfolder. Under the Trusted Root Certification Authorities folder, right-click the Certificatesfolder,
point to All Tasks, and then click Import.
2.you configured the server certificate as well, But check the client certificate whether have root certificate or not by following command?
makecert -pe -n "CN=SSLClientAuthClient"
         -eku 1.3.6.1.5.5.7.3.2 -is root -ir localmachine -in WebSSLTestRoot
         -ss my -sr currentuser -len 2048
3. Also check the Service Certificate whether its configured on the WCF Service side
4.Make sure that you followed all the steps are done correctly from your given referred link below
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
5.Besides, please try to set the require SSL as ignore to see if you can access the website.
If the above details cannot able to resolve this issue, please post your config file here.

HTTP 403 Service Error, HTTP 500 Internal Server Error

My scenario is:
Rfc adapter --> XI --> WebService
I am get the following error(403,500) at the Call adapter. I like to know whether the following error occurs due to the timing out occuring as the client is not sending back a response? Any suggestions/help would be appreciated.
<SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="0" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Body><SOAP:Fault><faultcode>SOAP:Server</faultcode><faultstring>com.sap.aii.messaging.srt.BubbleException: Can't call the endpoint; Exception raised by com.sap.aii.messaging.net.TransportException: HTTP 403 Service Error</faultstring></SOAP:Fault></SOAP:Body></SOAP:Envelope></Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
<Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
<Trace level="0" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
<Trace level="0" type="System_Error">HTTP status code 500 : Internal Server Error</Trace>
</SAP:TraceHeader>

from SM59 I tested the connection of INTEGRATION_DIRECTORY_HMI(HTTP connection to ABAP system)
detail:
staus HTTP response 500
status text : internal server server
duration test call 17173 ms
Please help me out to resolve this issue

UPK - Player gives HTTP Error 403 error

I have created a animation using UPK. A player.exe was generated. It was playing fine on my local drive but when I post it to shared interface it gives me this error -
Contact localhost:3282 home
HTTP Error 403 - Forbidden
Internet Explorer
Have anyone of you encountered this? Please help.
Thanks

Jay,
You should use this URL:
https://ipaddress/certsrv/mscep
If you try to get the cert from an http address, you will get an error. You should be using https. Also, the mscep.dll should not be part of the URL.
You can test this connectivity from any browser by putting that URL in the sddress bar. You should see a page similar to this:
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

HTTP Error 403 - Forbidden on Cisco ISE and SCEP RA

Dear Experts,
We are in process of deploying ISE 1.2 in our environment for BYOD.
The initial step of this process is to configure ISE as an SCEP Proxy and it requires certain configuration on the local CA. We have done all the required configurations on the local CA server.
Now, when we try to connect ISE with the local CA using SCEP RA Profiles, it gives "HTTP Error 403 - Forbidden". The URL we are using is http://ipaddress/certsrv/mscep/mscep.dll.
It seems that the local CA is not letting the ISE access the mscep.dll file. Now I dont understand how to allow ISE to access this file or the url. Please advise if there is any step by step process guide. Although, I have followed the ones from Cisco but it doesn't state how to give ISE the required rights for accessing mscep.dll.
Thanks in advance.
Jay

Jay,
You should use this URL:
https://ipaddress/certsrv/mscep
If you try to get the cert from an http address, you will get an error. You should be using https. Also, the mscep.dll should not be part of the URL.
You can test this connectivity from any browser by putting that URL in the sddress bar. You should see a page similar to this:
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

HTTP request was forbidden with client authentication scheme 'anonymous'

Hi,
We have updated our support Package for version BPC NW 10.0 release 801 from 0002 to 0005.
After the update we are not being to access the server folders in EPM Add-in.
We have the following error "HTTP request was forbidden with client authentication scheme 'anonymous'". Nevertheless we only can't access to the content of folders that are not public or local.
In SLG1 log, we have the error " Access not granted, You are not the member of team: BUSINESS ADMIN". This is not true because the user has SAP_ALL in BW and is a primary administrator in BPC. The data access profile associated is the administrator member access profile.
Has anybody seen this error?
Best regards,
JA

Hi Nilanjan,
We are able to log in into EPM Add-in.
We have the error when we try to open input forms or reports from server, but only from some folders.
When we select the folder we have the error.
For example we can see the content from:
WEBEXCEL\REPORTLIBRARY\
ADMIN\WEBEXCEL\TEAMREPORTLIBRARY\
But we can't see the content from:
BUSINESS ADMIN\WEBEXCEL\TEAMREPORTLIBRARY\
TEAM FI\WEBEXCEL\TEAMREPORTLIBRARY\
The user has administrator member access profile ans is included in all teams (ADMIN, BUSINESS ADMIN and TEAM FI)
We really can't see what could be the problem
Hope you can help us.
regards,
JA

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

KM Access via URL aborts with HTTP Error 403

Dear experts,
i am currently working on the following problem:
- we want to use 'KM Deep Links' to documents (open documents via URL Access)
- when people are authenticated they can use this deep links (no problem in this case)
- when they are not authenticated -> HTTP Error 403 is displayed
     -> we want a login form to be displayed and after successful authentication the document is displayed
- example:
     http://localhost:50000/irj/go/km/docs/documents//SAP%20Portal%20Documents/Members%20Area/Contracts%20_%20Guidelines/example.pdf
This is our scenario:
- Our Portal is a SAP Nw 7.0 with SP20
- We run an External Facing Portal and therefore we have applied SAP Note 837898 (Standard Configuration in current SPS)
   -> URL Access to Documents to which Anonymous Users have access works fine
- as a test we used the 'old Content Acess Path' mentioned in SAP Note 837898, which looks like this:
     http://localhost:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents//SAP%20Portal%20Documents/Members%20Area/Contracts%20_%20Guidelines/example.pdf
       - this access works as desired. Login Form is prompted and after authentication, the document is displayed. Problem here is that this Content Access Path doesn't work with Anonymous Access to KM.
So the goal is: Display Login form instead of this Error 403 Page. What configuration mistakes could we have done?
With best regards,
Marcus
Edited by: Marcus Böhm on Jan 25, 2010 12:08 PM

Update:
He tried a file extension other than txt or htm/html, and he still gets the error.
He also tried fiddling with IE -- Internet Options -- Languages to remove extraneous languages, and he still gets the error.

Reproduce 403 Forbidden Http error

how to reproduce 403 Forbidden Http error using web technology like servlets or jsp with basic authentication method.
* why this will be caused

Slowly I'm beginning to think that this Forum needs a bouncer (not just for Goldie).
I don't expect a lot, but just some basic rules:
* Know how to google.
* Reproduce error messages when you get them ...
* Mention the environment you are having the problem in
* Show us the relevant code if there is one (use the code-tags)
* Basically know How To Ask Questions The Smart Way (ok, fullfilling all of the items mentioned there would probably be to much to ask for a beginner, but some of the basics would be nice!)

Getting HTTP 403/500 errors when accessing SharePoint 2010 pages

Hi,
I'm getting intermittent HTTP 403/500 errors when accessing SharePoint Foundation 2010 pages.
When it happens, any SharePoint pages I access I get a HTTP 403 error (example: /sites/test/default.aspx) . If I don't specify a page, I get a HTTP 500 error (example: /sites/test/). What's odd is that I have non-SharePoint .NET applications running on the
same server under the "_layouts" directory and those still work just fine.
After recycling the IIS application pool, it starts to work again, but sometime won't stay up very long.
Does anyone encounter this problem before?
TIA
Also, I'm hoping to understand what the "Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo" method does to help me track down this issue. If you have any info on what the above method is doing, I really appreciated.
EVENT LOG
Nothing
ULS LOG
System.Runtime.InteropServices.COMException: Cannot complete this action. Please try again.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)
at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts,
Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent,
Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags,
Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)

These are the associated lines in the ULS.
01/07/2014 02:59:24.33   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Name=Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)
e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   High   Leaving Monitored Scope (PostResolveRequestCacheHandler).
Execution Time=6.79828022835305   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Runtime   tkau   Unexpected   System.Runtime.InteropServices.COMException:
Cannot complete this action. Please try again.    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32
iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid&
pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl,
Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage,
String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders,
String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32&
pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder)   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.48   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.50   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   General   8kh7   High   Cannot complete this action. Please try
again.   e8e08e76-1b88-4913-bce6-b9300e7b63f6
01/07/2014 02:59:24.51   w3wp.exe (0x1988)   0x10A4   SharePoint Foundation   Monitoring   b4ly   Medium   Leaving Monitored Scope (Request (GET:https://XXXXXXXXXXXXXXXXXXXXX)).
Execution Time=187.132582493026   e8e08e76-1b88-4913-bce6-b9300e7b63f6
Thanks,

X509 Cert Authentication Scheme - 403 HTTP Error

Similar Messages

Maybe you are looking for