Xbox one microphone problems?

My stock mic wont work with xbox one skype? It worked before any help?

Can you confirm what you mean by "stock mic", please? When you say that it "won't work with xbox one skype" do you mean that you can't hear the other person, the other person can't hear you, or both? When you say "it worked before", when did it work properly?
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

  • Xbox one Controller Problems in-game (FIX)

    Hey
    I hada problem when I play games with my Xbox one controller. Whenever I press the RT (right trigger) button while in game, either the trigger does not work or performs an action of another button on the controller. When
    this happens the controls are not reverse. Whatever button action it performs, that button still performs the way it should. 
    For example:
    I press RT it performs LT. And when I press LT it performs as LT, so the controls are not reverse. 
    This problem occurs in all games I played in Windows 10 (not in previous version of windows). However when I go to the controller settings in the controller panel to calibrate, the RT trigger performs how it should. So i'm
    not sure what the problem is maybe its an xinput problem or drivers problem IDK. This problem DOES not happen with the XBOX 360 controller. Only XBOX ONE controller. On a side not this with the original XBOX ONE controller drivers that was release in the summer.
    The new controller drivers that was release in the end of march don't work at all.
    If you are having these problems a fix to this, to install "Xbox one Controller (DFU)" drivers. To install this driver,
    1. Go to device manger, right click on the Xbox one controller tab. Click "update driver software".
    2. Then click "Browser computer for driver software".
    3. Next click "Let me pick from a list....".
    4. Last uncheck "Show compatible hardware". Then Scroll down the list till you see "Xbox one controller (DFU)" NOT "Microsoft Xbox One Controller (DFU).
    5. Install drivers. 
    If you don't see "Xbox one controller (DFU)"driver on the list go to step 1 and instead click "Search automatically for updated driver software". Once it's done that it will install a "bad driver". Now go back and continue form
    step 2, and the driver should be listed

    report this with the feedback in windows 10
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • Having problems connecting my xbox one to my aiport Extreme.

    Asked for public (static) IP's from my ISP and then got directed to Apple then Mircosoft. Having a lot of problems just trying to connect for my xbox live. More details: i live in an apartment complex that provides my internet through a jack in the wall, every other game console i own works perfectly (Nintendo Wii U and 3DS) any help would be appreciated becuase i feel close to pulling all my hair out trying to figure this out

    I am assuming that you can connect your Xbox One to the Internet but just not to Xbox Live! successfully ... correct?
    If that is the case, the issue is that you may need to reconfigure the router in order to open ports that are required for Live!. Since you live in an apartment complex that provides Internet service, that may not be possible if the complex owns the router.

  • Open NAT problems with Xbox One .

    When I first got my 1900ac I used Media Priortization to get an open NAT for Call of Duty Advanced Warfare on my Xbox One ; prioritizing the Xbox . It worked fine for about 6 months until I changed cable/net provider to Nextech in Ks. This company uses the 1900ac to hook up it's system for all it's customers ( since I already had one they're using mine ). Unfortunately I'm unable to get an open NAT in this game anymore ; I've tried just about everything , NAT forwarding , triggering , Media Prioritization . Nextech support & Xbox Live support , useless . Tried Portforward . com , nothing . Forwarding port 53 cuts off net connection & doing the static ip change for Xbox didn't help . Almost everything I've looked at seems out of date & I'm at my wits end . It would seem by now Linksys should have solutions available , any ideas ?

    Thank you chin_pamz13 for your response . I tried to check if my modem had a public or private ip address but I'm not sure how to do that ; I've read about double NAT's elsewhere . Regardless , I think I've finally found a solution that seems to be working so far . I went to the website " tech - recipes . com " & found an article , " Xbox One open NAT " by Aaron St. Clair . I tried his first suggestion about port triggering , with extra ports I had'nt seen before . That did not work for me so I followed his instructions for putting the Xbox in the DMZ & it's working ! I think my problems from before were the result of improperly setting up the static ip address for my router & Xbox . Previous instructions had me changing the ip in the console along with the router ; Aaron said not to do so in the Xbox , let the router do the work it's supposed to do & make sure the settings in the console are on automatic . In the router at the DMZ , I was'nt sure how to proceed , but at the bottom is a section labeled DHCP reservations list ; clicked on that , saw XboxOne , clicked on that & it filled out the MAC address above for me . Then I went to the Xbox network settings , advanced settings & clicked " automatic " at ip address , subnet & DNS . I checked mutiplayer connections & did the " hold bumper & trigger buttons " trick & finally got an open NAT ; fired up CoD Advanced Warfare & got the open NAT there also . I may have screwed up when I did the port triggering but since the DMZ fix seems to work I'm going to leave things alone . Hope this helps others with open NAT problems .

  • Xbox one and HH5 problems

    Set up my xbox one and HH5 on a wired connection.  My d/l and u/l speeds are only around 10mbps also my Nat is moderate.  Tried my old HH3 and speeds are 75mbps down and 17 up, but Nat is still moderate.  Have now gone back to HH5 and did hard reset on router and still have the same problems as mentioned above. I also deleted any mention of my HH3 in my manage network connections.
    My xbox 360 worked fine with open nat and fibre optic speeds.  Any have any idea on fixing this as i have been trying for the last 4 hours.
    Thanks

    I had problems with Xbox one and HH5.
    I have set my HH5 up this way and dont have any problems, with XB1 or any other device connected to the HH5 (wired or Wirless)
    Makes sure you have seperate ssid for both 2.4 and 5 Ghz wirless networks.
    Turn off upnp.
    Turn off Smart setup.
    Save
    Reboot router.
    Enjoy

  • WRT1900AC Problem With open NAT with multiple Xbox One's

    I am starting a new thread for some possible help with this. I have just recently replaced my r7000 with the wrt1900ac router and for the life of me cannot get my 2 xbox ones in the house to have open nat. Only one of them will show open NAT. Anyone get this to work and work 100% of the time? I have reseverved the IP's. I tried port forwarding.. I tried putting one in the dmz. I have tried port triggering. None of it works. One will be open the other stays at moderate. I have got it in strict before as well. I have upnp on. I cannot figure out what is wrong with it. Ideas? Also It seems my router reboot on its own and turning the LED's off after a reboot the wireless led's come on. Seems like a bug.

    Hewligun, found this on another Linksys thread, it appears that Linkysy may need to update their UPnP and all should be good. Original thread:Packet Dropping thread  Excerpt from thread: Re: WRT1900AC packet dropping[ New ] Options  ‎05-01-2014 06:16 PM  I did some research. Microsoft documents that port forwarding will only work for the one xBox in the forwarding rule. In the same document it mentions that the only way to have two xBoxes running at the same location behind a router is with UPnP. The UPnP protocol has be the newest version in order for it to work. I guess the WRT1900AC is running a later version of UPnP in which case a firmware upgrade will solve this. Keep in mind that Microsoft xBox Live itself is having documented issues as well so we can't really know for sure if the UPnP on the WRT1900 is the newer version or not at this point. Look at the affect services in the current xBox Live status: Affected platforms:Xbox Onexbox one outage;Social and Gaming,Xbox 360xbox 360 outage;Social and Gaming, Affected services:Accessing all game featuresJoining other Xbox Live members in online gamesPosting game performance or viewing the performance of other Xbox Live members https://support.xbox.com/en-CA/xbox-live-status
    Please remember to Kudo those that help you.
    Belkin\Linksys
    Communities Technical Support

  • OS X Delay over HDMI rougted through Xbox One (no delay using Windows)

    I have my Mac Mini (late 2012, OS X 10.8.5) connected via HDMI to my Xbox One, which is connected to my tv via HDMI. I have been experience a very annoying lag, especially noticeable when using my trackpad. There is a noticeable delay between my trackpad input and the movement of the cursor on my tv. At first, I thought this was due to the signal being routed through the Xbox, considering the fact that I never experienced any delay prior to routing through the Xbox One. I just assumed the Xbox was causing the slight delay. However, I have a Windows partition which I hardly ever use. Today, I booted into Windows for the first time since I've been routing through the Xbox. To my surprise, there was no delay whatsoever. My cursor moved perfectly in time with my trackpad input. Now that I've booted back into OS X, I'm experiencing the delay again. The Xbox does seem to be introducing the problem, as the delay is gone when I connect my Mac Mini directly to my tv, bypassing the Xbox. Why would there be a delay introduced to OS X when there is absolutely no delay on Windows 7? Is there something I can do to fix this? Is there some sort of preference that I can change in OS X to reduce this delay? I know the Xbox is introducing the problem, but it doesn't really seem to be the cause, and I can't help but think that it can be fixed since the Xbox isn't causing the problem with Windows running on the same computer.
    I know that I could just bypass the Xbox, but I don't want to do that. I'm aware that this would fix the probem, but it would be very inconvenient. Also, that doesn't really solve the problem, it just ignores it. Whatever the cause of the delay, it appears to be unique to OS X, not caused solely by the Xbox.

    try another smtp relay service...
    in either case, you may want to setup an SPF record for your domain which specifies the relay service is authorized to send mail for your domain.
    Jeff

  • Xbox One Strict NAT won't switch to Open

    Linksys Model: Linksys EA6350-4A
    I have set up a DMZ with the correct settings, reset both my cable, linksys, and xbox, yet it still shows up as strict. When I tried port forwarding, my wiFi goes to ****, and my xbox still stays on strict. I would appreciate some help with this as I have already reset my router (which I just bought two days ago) to factory settings about 4 different times already.
    EDIT: This is also on a WIRED connection to the Xbox.

    Your ISP modem has NAT so your in a double NAT condition which isn't recommended:http://na.smc.com/products/residential/voice/smcd3gnv/ If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Be sure to disable all other filters and firewalls on the ISP modem. Configure the 6350 router for Port Range Triggering :https://community.linksys.com/t5/Wireless-Routers/Open-NAT-problems-with-Xbox-One/td-p/944929/page/2 Setup a reserved IP address for the xbox at 192.168.1.199 on the router then reboot the router. Performe a Network Setting Factorty reset on the xbox. Turn Off the xbox then back on then chk NAT status. You should get OPEN, however if the ISP modem is doing any processing then you could see moderate... 

  • Not able to connect to uplay on xbox one

    Hi there,
    I seem to have a problem where I can't connect to any ubisoft games on my xbox one. I have both Assassins Creed : Black Flag and Trials Fusion and both constantly say the servers are unavailable. I am able to connect to the uplay app via the xbox one and also the website but no luck at all with the game servers, is this still a widespread issue?
    Regards,
    Mike.

    Hi Mike_f_81,
    Welcome to the forum and thanks for posting. 
    We are not aware of any issues affecting Ubisoft at the moment but send me in your details and I will be in touch. 
    Click on my username and under the "about me" section you will the link to get in touch with us.  Whenever we receive your details we will go from there. 
    Cheers,
    Olga 
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Getting an Open Nat on XBOX One?

    Hi all, first post here.
    I'm trying to configure my Xbox One so that I have an open nat type as opposed to the moderate one I have now but have abosuletly no idea on how to go about this. I've followed a few guides, but not made any progress. In terms of hardware, i'm running with a BT HH5 Type A on Infinity Option 2. I know for a fact I'm not on Carrier Grade Nat.
    So, any ideas? I'm a bit lost really...

    The Home Hub 5 has poor UPnP support. Because of this it is not fully compatible with the xbox one.
    There are work-arounds you can try
    To tell you how to get round the problem I need to know a couple of things
    Do you own more than one Xbox One?
    Do you also own an xbox 360?
    Do you play Call of Duty Ghosts on the xbox one?
    There is a workaround to open the NAT but this wont work for call of duty ghosts.
    Go to the Network settings in the xbox settings app then run a multiplayer test. When test is finished press and hold both the triggers and the bumper buttons at the same time to go to detailed stats screen.
    When on this screen press A then press A again. Hopefully your NAT should now be open. You sometimes have to do this two or three times though to get the NAT open.
    Because of the home hub 5's poor UPnP support though there is no way to open the NAT in cod ghosts using UPnP. You need to forward port 3075 to open the NAT in Ghosts.
    This is all a total pain and I keep hoping BT will update the firmware with a fix but i not holding my my breath.
    It should be said though that NAT doesn't matter for games that use dedicated servers. So for games like Forza or Titanfall you don't need to worry about NAT. It's only games that use p2p that need the NAT open like COD or assassins creed black flag.

  • Xbox One Portfowarding on WRT310N to get NAT open

    https://support.xbox.com/en-US/xbox-one/networking/network-ports-used-xbox-live
    Can someone help me out with this? Ive tried with single port and the port forwarding but my NAT is still moderate.

    Read the entire thread in link below. It mentions/speculates that the UPnP for Xbox one is not compatible with many routers. I would say that is a really good speculation. The NAT/UPnP problem has been reported with some linksys, netgear and asus routers. The problem is linksys and netgear are really slow about updating firmware. Sometimes they won't update at all. Asus, on the other hand, updates frequently and will most certainly release an updated version of UPnP to be compatible with xbox one , if they haven't already. I'm not sure if dlink routers are having the same UPnP/NAT problem with Xbox one. Some googling would be probably reveal more.
    http://forums.xbox.com/xbox_forums/xbox_support/xbox_one_support/f/4267/p/1627170/4384186.aspx

  • HH5 and Xbox One - randomly open and moderate NAT

    Having this annoying problem where the NAT keeps showing as randomly open and moderate. I have set a static I.p for it with no luck so far. I can switch it on and off a dozen times and it can show open, then be turned on the next dozen times and be moderate.
     The odd thing is that I have a PS4 and Xbox 360 attached and they both show as always having an open NAT. All devices are connected wired. Tearing my hair out over this.  I can't recall the last time I had to mess around with static I.p's a d whatnot. Everything just worked with my old Virginia set up. I do a fair bit of online gaming and so having an open Nat is important to me as even moderate with xbox live can be a real nuisance.  Thanks for any help.

    Well after googling non stop since around 4am this morning I have found what I think the problem is - and that makes the most sense.
     I can't port forward because the HH5 has assigned some of the ports to my Xbox 360 (this was with me only using upnp and NOT having tried any port forwarding) and so now it won't let me manually assign those ports to my Xbox one - hence the error message that I'm getting.
     The worst part is, that upnp SHOULD open those ports as needed when I switch my Xbox One on (I live alone and so both machines are never conencted at the same time) but it isn't, because for some reason it is keeping the shared ports solely for the Xbox 360.
     So I was trying to manually assign those ports with port forwading to force it to open those same ports on my Xbox One...but so far I haven't got as far as doing any port forwading whatsoever.
     I had a router with DD-WRT firmware on my old Virgin connection, and that allowed me to open whatever ports I wanted to whatever device I wanted, but it didn't matter because upnp worked properly on it. Unlike the HH5 which after all my reading has the same problems going back as far as the HH2. The internet is awash with people who couldn't get upnp or port forwading to work how it should.
     So far the only people gettng a stable open NAT seem to be those with one Xbox or the other, but NOT both. Which is ridiculous and only seems to affect home hub users.

  • Moderate Nat On PS4 & Xbox One

    Hello There!
    As the title says my PS4 and Xbox One Are both Having Moderate Nat Problems And Im Pulling My Hair Out, Any Help ?

    G33MAN wrote:
    Yeah but did you do the multiplayer test and then hold all the bumper buttons and the two triggers ? It works just google xboxx one wireless issues and one of the very first links is by MS telling people to do this to open the nat.
    Yes but this is only temporary.
    As soon as you restart even in energy saving mode the nat goes moderate again.
    I am using wired as well so the problem isn't just with wireless.
    I think the xbox one has major UPnP bugs that makes it incompatible with the bthomehubs.
    The only NAT I can get to stay open is call of duty ghosts. Thats through port forwarding port 3075.
    But the xbox one dashboard is having problems even though I port forwarded port 3074.
    I think the problem is that the home hub overwrites this port forward rule whenever I switch on my xbox 360 as the xbox 360 opens port 3074 by UPnP. I still get open NAT on the 360 suggesting the home hub has allowed the 360 to steal port 3074 which is when I start getting the nat problems on xbox one.
    Oh and can someone with a bit of knowledge explain what this cone NAT is and whether it is a problem?

  • Received a beat up xbox one...

    Hi guys, I ordered the sunset overdrive xbox one bundle and received it today (super quick shipping) The problem is the box was not shipped in anything, you just slapped a label on the consoles box itself and sent it out. Well, it arrived ripped up, full of dirt and soggy. I know the box isn't a huge deal to most, but when spending almost 400 for a limited edition bundle you want to keep everything in collectors shape, I think it's a bit unacceptable to pay that price and get sent something that looks like it's out of Amazon warehouse deals.
    I'd like some sort of compensation for this or to at least know what my options are. Not mad about it, just disappointed.
    Thanks in advance.

    Hello Packersfan420,
    While not much of a gamer myself, I do like to purchase collector editions of my favorite movies. It’s rare for one of them to arrive in less than pristine condition, but it can be incredibly disappointing if it happens. I’m glad to hear that your console isn’t damaged as a result of something like this, but I do understand why receiving a damaged box is less than ideal. Limited edition items can be expensive, and even though you got yours a great price, I know I wouldn’t be happy to find myself in a situation like the one you describe.
    Please know that I’d like to discuss this with you in greater detail and have sent you a private message to collect further information. You may view it by logging into the forum and clicking on the envelope icon in the upper right-hand corner of your screen.
    Thank you for posting,
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Can't log into skype on xbox one.

    I am trying to use skype on my xbox one and about a month ago it worked fine but now will not work. When I go to sign in it says you have been signed out of skype please sign into an xbox account to use skype. It just gets stuck in a loop like this. I saw someone had a previous problem like this, I made sure my microsoft account is linked to skype which it is, which is linked to my xbox live profile. I can use skype fine from my laptop or phone but when I try to do xbox have this problem. 

    Well I already figured out the problem I had changed my microsoft password since last time I logged into skype I just had to remove my xbox profile and then re add it with new password. 

Maybe you are looking for