Xcode 3.0 & InterfaceBuilder (IB) - IB Write Files & xcode syncing problems

Anybody tell me why IB in Leopard is broken?
After I create a new project in xcode & then I open up the .NIB. I'll start designing my UI with custom objects. When I perform either a write file.. or Sync with xcode, it doesn't work?
Is this a bug? If so what is the work around? Create the files in xcode first, then when performing a write files replace them???????
Thanks,
Jim

Perhaps you should try to create a new project from scratch and see if that new project exhibits the same problem. If so, there is a problem with your system. If not, there is a problem with that particular project and/or NIB file. Both Xcode and the new IB work fine for me.

Similar Messages

How to find corrupted music files causing sync problems (dotted grey circle)?

I'm having the dreaded dotted grey circle problem and it's driving me mad. Based on what I read in the for a it could be because a new music upload is corrupted, but how do I find it, when each try to sync last two hours? And then to de-sync again lasts another half hour, to resync again lasts another two hours ... My life is not long enough for this crap!
Often I have no idea what it's doing - "waiting for changes ..." ... should I wait hours for something happen only to realise nothing's happening??

Is that even possible? We're talking about a 6-year-old iPod thereabouts.

JNI Invocation: open file in Java, write file in CPP

Hello,
Warning: I am a dunce, bad CPP code ahead!
Using JNI invocation, I am trying to read a binary file in Java and write it in CPP.
Everything compiles and runs without error, but the input and output jpg files are of course different.
TIA to any help,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("Testing:" + strInfo);
        File file = new File("1.jpg");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length
               && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
#include <stdlib.h>
#include <string.h>
#include <jni.h>
#include <windows.h>
// for file operations:
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jstring jstr;
     jobject obj_print;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     jstr = env->NewStringUTF(" from C++\n");
     obj_print = env->NewObject(cls,id_construct);
     // signature obtained using javap -s -p ByteMe
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray jbuf = (jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          jlong size = jsize(jbuf);
          printf("size is: %d\n", size); // size shown in output is
          std::ofstream out("data.jpg", std::ios::binary);
          out.write ((const char *)jbuf, 100000);
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

Hello,
Me again. Well, not such a dunce after all. Here is code that works correctly, and compiles with no errors and no warnings.
Will much appreciate help with clean-up code.
TIA,
kirst
(begin ByteMe.java)
import java.io.*;
public class ByteMe
    public long getFilezize(String strInfo) throws IOException
          // demonstrates String parameter passed from CPP to Java:
          System.out.println("(getFilesize) Hello world" + strInfo);
          File file = new File("1.bmp");
          InputStream is = new FileInputStream(file);
          // Get the size of the file
          long length = file.length();
          is.close();
          return length;
    // Returns the contents of the file in a byte array.
    public byte[] getBytesFromFile(String strInfo) throws IOException
        System.out.println("(getBytesFromFile) Hello world" + strInfo);
        File file = new File("1.bmp");
        InputStream is = new FileInputStream(file);
        // Get the size of the file
        long length = file.length();
        System.out.println("length is: " + String.valueOf(length));
        // Create the byte array to hold the data
        byte[] bytes = new byte[(int)length];
        // Read in the bytes
        int offset = 0;
        int numRead = 0;
        while (offset < bytes.length && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0)
            offset += numRead;
        // Ensure all the bytes have been read in
        if (offset < bytes.length)
            throw new IOException("Could not completely read file "+ file.getName());
        // Close the input stream and return bytes
        is.close();
        return bytes;
    public ByteMe()
          //System.out.println("in constructor");
}(end ByteMe.java)
(begin ByteMe.cpp)
          Signature obtained with command:
               "C:\Program Files\Java\jdk1.5.0_15\bin\javap.exe" -s -p ByteMe
               Compiled from "ByteMe.java"
               public class ByteMe extends java.lang.Object{
               public long getFilezize(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)J
               public byte[] getBytesFromFile(java.lang.String)   throws java.io.IOException;
                 Signature: (Ljava/lang/String;)[B
               public ByteMe();
                 Signature: ()V
     Compiled VC++ 2005 Express, run on Vista
#include <stdlib.h>
#include <string.h>
#include <jni.h>
// file operations
#include <fstream>
int main( int argc, char *argv[] )
     JNIEnv *env;
     JavaVM *jvm;
     JavaVMInitArgs vm_args;
     JavaVMOption options[5];
     jint res;
     jclass cls;
     jmethodID mid;
     jmethodID sizeid;
     jstring jstr;
     jobject obj_print;
     jlong filesize;
     options[0].optionString = "-Xms4M";
     options[1].optionString = "-Xmx64M";
     options[2].optionString = "-Xss512K";
     options[3].optionString = "-Xoss400K";
     options[4].optionString = "-Djava.class.path=.";
     vm_args.version = JNI_VERSION_1_4;
     vm_args.options = options;
     vm_args.nOptions = 5;
     vm_args.ignoreUnrecognized = JNI_FALSE;
     // Create the Java VM
     res = JNI_CreateJavaVM(&jvm,(void**)&env,&vm_args);
     if (res < 0)
          printf("Can't create Java VM");
          goto destroy;
     cls = env->FindClass("ByteMe");
     if (cls == 0)
          printf("Can't find ByteMe class");
          goto destroy;
     jmethodID id_construct = env->GetMethodID(cls,"<init>","()V");
     printf("%s\n",id_construct);
     jstr = env->NewStringUTF(" from C++!\n");
     if (jstr == 0)
          // Normally not useful
          printf("Out of memory (could not instantiate new string jstr)\n");
          goto destroy;
     obj_print = env->NewObject(cls,id_construct);
     //BEGIN BLOCK to get file size
     sizeid = env->GetMethodID(cls, "getFilezize", "(Ljava/lang/String;)J");
     if (sizeid == 0)
          printf("Can't find ByteMe.getFilezize\n");
          goto destroy;
     else
          printf("got here\n");
          filesize =(jlong) env->CallObjectMethod(obj_print,sizeid,jstr);
          printf("got filesize\n");
     // END BLOCK to get file size
     // BEGIN BLOCK to write file
     mid = env->GetMethodID(cls, "getBytesFromFile", "(Ljava/lang/String;)[B");
     if (mid == 0)
          printf("Can't find ByteMe.getBytesFromFile\n");
          goto destroy;
     else
          jbyteArray ret =(jbyteArray) env->CallObjectMethod(obj_print,mid,jstr);
          // Access the bytes:
          jbyte *retdata = env->GetByteArrayElements(ret, NULL);
          // write the file
          std::ofstream out("data.bmp", std::ios::binary);
          //out.write ((const char *)retdata, 921654);
          out.write ((const char *)retdata, (long)filesize);
     // END BLOCK to write file
     destroy:
         if (env->ExceptionOccurred())
            env->ExceptionDescribe();
    jvm->DestroyJavaVM();
}(end ByteMe.cpp)

How to write Header and Footer elements in Write file Adapter

Hi,
I have a requirement to write the file.The write file contains header and footer elements ,how we can write these elements. These elements are fixed for all files.these are not come from any input.below is the sample file.
$begintable
name,Id,Desg
ad,12,it
$endtable

Hi,
I have created the XSD for you, and i created a sample SOA Composite which writes the file same like what you want, the below XSD can write a file with one header record, multiple data records and one trailer record.
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/WriteFile"
targetNamespace="http://TargetNamespace.com/WriteFile"
elementFormDefault="qualified" attributeFormDefault="unqualified"
nxsd:version="NXSD" nxsd:stream="chars" nxsd:encoding="UTF-8">
<xsd:element name="Root-Element">
<xsd:complexType>

<xsd:sequence>
<xsd:element name="RECORD1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="header" type="xsd:string"
nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:quotedBy='"'/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="RECORD2" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="data1" type="xsd:string"
nxsd:style="terminated" nxsd:terminatedBy=","
nxsd:quotedBy='"'/>
<xsd:element name="data2" type="xsd:string"
nxsd:style="terminated" nxsd:terminatedBy=","
nxsd:quotedBy='"'/>
<xsd:element name="data3" type="xsd:string"
nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:quotedBy='"'/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="RECORD4" nxsd:conditionValue="$endtable">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="trailer" type="xsd:string"
nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:quotedBy='"'/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Hope this helps,
N

Error while relocating (Can't write file (no space)) - Help please

I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
Hoping for a solution!
Message was edited by: thomas80205

It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

WARNING: Cannot "Read or Write" files on iPod

My iPod has been behaving very curiosly as of late. For the past month a wanring has flashed up on my iTunes screen when attempting to sync music files. The warning says *"Cannot read the disk 'iPod'. Unable to read or write files"*. Despite this warning my iPod has been able to update daily podcasts without issue. However, when I recently purchased new music I could not get it to sync to my iPod. I have no problem listening to this new album in my iTunes library, but it just will not sync to my iPod. I created a playlist for it and attempted to add it, but I discovered that the iPod was not syncing the playlists either!
In a recent attempt to remedy the problem I selected only to sync the playlist that had the new album. What happened was frightening. All my music was no longer on the iPod, with the exception of my podcasts! I tried altering the settings to return all the music, but now I am unable to add any of my music from the library.
I am wondering if anyone has experienced this difficulty before, and if so, if they have any trouble shooting techniques. I have already been ti Apple's support page and completed the 5 recommended steps, to no avail. Any suggestions or thoughts as to what might be occuring.

Luckily, backing up your itunes library is easy. Just duplicate the folder(s) with your music in it. (Most likely, it's user/Music/ITunes.) Once the copy is made, you might want to move it to a different part of your hard drive.
Now, restoring your ipod WILL wipe the device. If there's anything on your ipod that isn't in your itunes library (unlikely but possible), you want to make sure you've got a copy of it somewhere before restoring.
Before restoring, check to see if there is an update to the ipod's firmware that needs to be installed. This is a "longshot" but might help. Just click the "check for update" button on the ipod's "Summary" pane in itunes. (Current version is 1.2.3, I think).

Fstream can't read or write files 4GB even with -m64?

Using C++-style streams, I have been unable to read or write files >4GB. For example, when writing 5GB in one go, I get only 1GB. The header for write uses the type streamsize for the size parameter, and according to sizeof, streamsize is 8 bytes (when using -m64). Looking at the assembly for a simple testcase, I verified that size parameter was not truncated before calling the write function.
What makes this interesting is that I can read or write large files if I do it in the C-style (fopen, fwrite, fclose) or if I use the C++ functions and manually do it in 1GB blocks. I tried the instructions for LFS, but they didn't work and it seems like it shouldn't since this is C++ and I am building a 64-bit app. I have observed this with solaris studio 12.3 and 12.4.
Is this a bug or am I missing a compiler flag?
A simple testcase to expose this:
#include <iostream>
#include <fstream>
#include <stdio.h>
using namespace std;
int main() {
streamsize goal_size = ((int64_t) 1<<32) + ((int64_t) 1<<30);
cout << goal_size << endl;
char* data = new char[goal_size];
fill(data,data+goal_size,'c');
FILE* f = fopen("classic.data","w");
fwrite(data,1,goal_size,f);
fclose(f);
fstream file("stream.data", std::ios::out | std::ios::binary);
file.write(data,goal_size);
file.close();

Eh... sorry, didnt read the source close enough
I can reproduce your misbehavior when compiling "by default" (with default -library=Cstd).
It fails somewhat differently with Apache STL (-library=stdcxx4), which is kinda the modern version of Cstd.
It works fine when compiling with -library=stlport4, or -library=stdcpp (-std=c++11).
Looks like it is a deficiency of those particular STLs.
regards,
Fedor.

How to write file at server end?

Hi,
I use a af:inputFile component to receive uploaded files. And want to write files to the directory of server. However, when execute java.io.File.createNewFile(), it throw exception. How to resolve it?
import org.apache.myfaces.trinidad.model.UploadedFile;
import javax.faces.event.ValueChangeEvent;
import java.io.InputStream;
import java.io.File;
public class UploadFileHandler {
    public void doUpload(ValueChangeEvent event) throws IOException {
        File file = new File("C:\temp.txt");
        *file.createNewFile();* //Error happen here.
}

Hi Cheney,
It is good practice to use System.getProperty("file.separator") instead of hardcoding "/" or "\" .
Though your issue is resolved by using "//", you might want to consider changing to the above.
-Arun

How to write file to server side?

hello,
Could anyone pls help me...
I just want to see an example how can I write to a file that is placed at the server(save place as the applet).
p.s. I have been successfully read a file from there...
Suppose I have signed the applet (self-signed), anymore security problem I need to pay attention to?
Thanks a lot!!

hi mandy, from the applet u can send the file to be written into the server to a servlet running in server and the servlet can in turn write the file into the servlet. by applet - servlet communication, u can easily read and write files to the server.

Cannot Write Files to my Formatted External Hard-drive

I've been struggling with this problem for awhile now. I have a 200GB external hard drive that I used on my windows box. I have music on it and would like to use it on my macbook. When I plug it into my macbook, it mounts and shows up on the desktop. I can go into it in finder, and view the files and folders that are on it. I can also create new folders. However, when I try to read or write files to/from the hard drive, finder stalls at 'zero KB of x MB written'. If I try to copy a file to the drive, the file will be created but it will be of zero or very very small size.
I reformatted the drive with Disk Utility and also via the command line with 'diskutil reformat /dev/disk1s5' and these reformat the drive successfully, but the same problems occur.
What could be going on? The drive is not faulty, and it mounts just fine. I just can't read or write from the drive in OS X.
Please help! Thank you in advance.

The NTFS file format is not really that compatible with macs (you can only "read" files, but not "write" to them). Also, while you can reformat a hard drive with the same or different file type, the NTFS type is the only one that will not let you go from having a NTFS formatted drive and reformatting it as a different format (you can do it again as NTFS but that's it). If you have a FAT or FAT32 formatted drive, you can go and reformat it as NTFS, but once it has had the newer windows format style done to it, you can't change it to anything else.
Also, as I think you said you could read from it at first, and then were not able to?, this would be because the reading of the files would have been fine, but as soon as you went and reformatted it again (which basically wipes the slate clean), you lost all the data that possibly was on there, and now as an NTFS format with no data, therefore nothing for a Mac to get a chance to "read", you have nothing and can only use this as an NTFS drive for windows (or any other possible OS that is NTFS compatible).
Sorry about the bad news... Try to sell it to a windows person and get another external hard drive (formatted as FAT32 or not pre-formatted yet, then format as FAT32) so that you can use that with your Mac...

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

StarOffice 8 - finding all different font types in a Writer file

Hello,
I am currently using StarOffice 8 on a Windows XP system.
I frequently transfer a large Writer (.odt) file between different computer systems as I constantly update the file with new information. As part of the updates, I use different fonts. As I install a particular font on one machine, this font may not be installed on another machine when I add new information to the file on that particular machine.
When I open the Writer file on a machine that has some font not installed, the WYSIWYG appears incorrectly (since the proper font is not installed on that computer, of course) but if you highlight the incorrectly-displayed info, it says what the font type should be (ie, "WP Hebrew David" font). I then go online to download that specific font type for this the computer. Then the data is displayed correctly.
When you have many, many different font types used in a file, it is hard to keep track of all different fonts used. Before anyone questions me on using so many different fonts in a file, it is important for my file to visually display the correct data, and this means using a quantity of fonts.
What I am wondering is the following:
Is there a way from within StarOffice 8 to scan a particular file and then let the user know every different font name used in that file?
That way, if the file contains a font which was used on another machine but not currently installed on the current machine -- when I am updating information in the file -- I can then see a list of fonts used and then install new fonts accordingly after checking to see if they are installed (by checking the Fonts folder in C:/Windows)
I hope this makes sense, or is it "clear as mud"?
Please excuse my bad English grammar as I am not a native English speaker, but have picked it up living in Canada for the last 20 years :-)
Cheers & thanks in advance for any help !
David
Edited by: Broad_Arrow on May 18, 2009 11:18 PM

May 20 2009
There is a Fonts Used macro writer_printAllFonts.sxw Further checking this is the wrong StarBasic macro. The one I use came from an OOo forum I think. I use it with SO7, SO8 and SO9.
It is at the end of this message. To install it:
[1] Copy the macro below to the clipboard
[2] Go to Tools>Macros>Organize Macros>Basic>Standard
Select New. Highlight what is there, paste, and close.
[3] Go to Tools>Customize>Menus>Tools
Highlight Word Count, then go to Add>Macros>My Macros>Standard>Module1
Highlight FontsUsed, Click Add, Close, Ok
Phil
REM ***** BASIC *****
Sub Main
End Sub
Sub FontsUsed 'Version 1 John Vigor 4/25/06
'List fonts used in Writer document. Appears to work in normal text,
'Sections, normal Tables, and Frames. Will currently crash on a Table
'within a Table.
oDoc = ThisComponent
Dim fonts as Integer: Dim aFonts(1)
oTC = oDoc.Text.createTextCursor
oTC.goRight(1,true) : CurrentFont = oTC.charFontName
fonts = fonts + 1 : aFonts(fonts) = CurrentFont
REM Do "normal" text.
partEnum = oDoc.Text.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
REM Do Frames.
oFrames = oDoc.getTextFrames
If oFrames.Count > 0 then
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = "NEW FONTS, IF ANY, FOUND IN FRAMES:"
For I = 0 to oFrames.Count - 1
thisFrame = oFrames.getByIndex(I)
partEnum = thisFrame.createEnumeration
PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
Next
EndIf
REM Prepare list.
For I = 1 to fonts
s = s & aFonts(I) & Chr(10)
Next
iAns = MsgBox(s,4,"FONTS FOUND. Create font list document?")
If iAns = 7 then
End
Else
NewDoc = StarDesktop.loadComponentFromURL("private:factory/swriter"," blank",O,Array())
oVC = NewDoc.CurrentController.getViewCursor
oVC.String = s : oVC.collapseToEnd
EndIf
End Sub
Sub PartEnumerator(partEnum,CurrentFont,fonts,aFonts())
While partEnum.hasMoreElements
thisElement = partEnum.nextElement
If thisElement.supportsService("com.sun.star.text.Paragraph") then
portionEnum = thisElement.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
ElseIf thisElement. supportsService ("com.sun.star.text.TextTab le") then
Cols = thisElement.getColumns.Count - 1
Rows = thisElement.getRows.Count - 1
For C = 0 to Cols
For R = 0 to Rows
thisCell = thisElement.getCellByPosition(C,R)
cellEnum = thisCell.createEnumeration
While cellEnum.hasMoreElements
thisPara = cellEnum.nextElement
portionEnum = thisPara.createEnumeration
PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Wend
Next
Next
EndIf
Wend
End Sub
Sub PortionEnumerator(portionEnum,CurrentFont,fonts,aFonts())
Dim found as Boolean
While portionEnum.hasMoreElements
thisPortion = portionEnum.nextElement
thisFont = thisPortion.charFontName
If thisFont <> CurrentFont then
For I = 1 to fonts
If aFonts(I) = thisFont then found = true: Exit For
Next
If found then
CurrentFont = thisFont : found = false Else
fonts = fonts + 1 : ReDim Preserve aFonts(fonts)
aFonts(fonts) = thisFont : CurrentFont = thisFont
EndIF
EndIf
Wend
End Sub

How to read write file in HTML5 extension

Hi,
I think it could be very generic question since moving from Flex to HTML5 extension is loosing ability to read write a file in local file system.
I'm trying to write a log file within extension space but It throws error as 'TypeError: Illegal constructor'
new File(csInterface.getSystemPath(SystemPath.EXTENSION)+"/log/Log_"+.getCurrentDateString+".txt");
does someone have solve for this.
Thanks in advance
MM

Yeah, It could be a reason for nested error but I got the error right before executing "getCurrentDateString". But I kind of figured it out as Javascript looses ability to read write file in user file system except Crome browser, you can read more here. However Adobe has added fs API within CEP which allows user to read and write file in user system.
Here is some peace of code on how to do it, complete API reference check here :
var result = window.cep.fs.writeFile(logFilepath, "Your data goes here");
if(result.err != 0)
throw new Error("Result object has error");
However still this does not provide any method to append the content in existing file as a result if you wanted to write kind of log file, every time you need to first read the file and then concatenate your content to file data then write data again to new file. sound hefty to append content?
I'm hoping if any Adobe staff has any comment on this.
Thanks
MM

Write file in pda

Hi!
Find attached a file which stores two variables (x, y) in a file .txt every time the button "Run" is pressed. I don't know why, but in Pocket Pc it doesn't work: the file .txt is created correctly, but this file is empty.
0,3232

Hello.
I have been able to solve my probelm. I attach the program for if somebody wants to use it.
Greta
Attachments:
write file.vi ‏52 KB

Write file to directory

Hi,
all the while i am able to write file to different apps directories...
just recently i asked Basis to create one more directory for which i am not able to write file...
I tried to put the same file in older directory, which i am able to do.
i tried CG3Z to keep the file but in vain and finally i tried command promt to put the file there the message is no authorizations...
Mainly my question is:
Is it possible to restrict USER ID for particular directory?
Where can i check the authorizations...

Hi,
As per my understanding i should have
S_DATASET
S_RZL_ADM
Can anyone suggest me!

Xcode 3.0 & InterfaceBuilder (IB) - IB Write Files & xcode syncing problems

Similar Messages

Maybe you are looking for