Xcode 4.6.1 won't load .mov movies with latest iMac

G'day
I've got a project in Xcode where I want to loop a small movie (.mov format). If the project is opened and saved on an older Mac, then run on mine, the movies load and run ok.
However, if built a project on my new iMac, the .mov movies refuse to be loaded in the Quicktime Player Window in the build phase.
My iMac is a 27" i7, 3.4 GHz, with 32 GB ram, and NVIDIA GeForce GTX 680MX 2048 MB graphics card, and 3TB fusion drive.
I believe the iMac might be the problem, but I can't re-load Xcode from the App Store, as it keeps saying it's installed, even after trashing it.
If any using XCode with a similar mac can try the procedure, I'd appreciate it. The attached image is where the refusal occurs.
BTW, anyone know how to re-download XCode?

Well, I downloaded the Sorenson.mov from your suggested site xnav, and it didn't work either.
In addition, I've completely re-installed XCode, to no avail.
It looks like it's boiling down to the 'Choose' dialog, with the NVidia card.
Weirdly, I can choose the altered graphic from the expanded .zip file that was saved from an older Mac, from my main App, and it's selected. If I then delete the expanded .zip project, I'm told that the resource has been removed in my main project, and do I want to keep the resource in the Quicktime panel. If I answer yes, the .mov stays in the panel.
ATM it's a difficult and kludgy workaround, and I'd like a definitive answer.
I've lodged a bug, and hopefully someone with the same outfit as mine can verify this anomoly.
Regards
Santa

Similar Messages

My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

Deleting the System Preference or other .plist file
..Step by Step to fix your Mac

IDVD won't load the mov

I don't understand, in the past I move the .mov onto the project and it, in the status part, begins loading. But it doesn't do that, it doesn't even load in. Is it because it is so long perhaps??
thanks
Kate

you gave us very little info about your problem, Katherine.. :-/
iDVD doesn't accept all kind of .mov, mov is just a container, containing (sic!) many formats... not all are supported by iDVD... where did it come from, that misbehaving .mov?
secondly, iDVD accepts projects of max. lenght of 120 minutes... the size in MB/GB doesn't matter... e.g. if you try to burn a highly compressed .mov containing some h264/mpeg4/divx/whatever... data of letssay 1GB size, but 180min length, that doesn't work with iDVD....
reading "iBook" in your specs:
make sure, you have at last 10 - 15GB free on your internal drive AFTER you have imported your movies into iDVD to make the app work flawless....
helpful?

LoadMovieNum won't load the movie

I just built an app that loads multiple swfs (one at the
time). the loaded swf then loads text from a file. I built the
whole thing and tested it with Ctrl+Enter and all along the
building process it worked like a charm. If I go to the folder
where the swf files are and I execute "level 0" swf it loads but
nothing else does.
Here is a quick description. The user loads Level 0 which has
18 buttons on the timeline. all buttons are set to
on(release){
loadMovieNum("blabla.swf",10);
if I give any of the buttons any other function like laod a
page or change color it does it but it will not load the movie. I'm
stumpted!! I've done this many times. Any thoughts?
Thanks

Yes it is. The structure is as followes. 1 Shell with
"loadMovieNum("main.swf",5) on the first frame (that works).
Main.swf loads on level 5 and it has 18 buttons eache with a
command to load a third movie on level 10. All 18 movies, main.swf
and the html are in the same directory.
At first I thought something in Windows was preventing the
ActiveX control from running but I rulled that out when I give any
of the 18 buttons any other command other than loadMovieNum and it
executes no problem.
Weird........
Thanks for taking the time.

In safari, On my Ipad2,I get the error message, "too may redirects" and the page won't load. Anyone with advice? I have cleared the cache, cookies, and history and restarted.

In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

My MacBook Pro won't load my CD with pictures. Help me :(

I bought my laptop a couple months ago so I know it's not because my computer is old, but my picture CD won't load or open or anything. It makes a noise like it's going to start up, but still I get nothing. It works on my parents' desktop computer, but not mine please help me!

Hi JustinAlexa,
You don't say if other CDs or DVDs work. Please check out this article which goes through troubleshooting optical disc reading.
Archived - Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
http://support.apple.com/kb/ts2288
If it's just the one CD, it's likely an issue with that CD. See if another copy can be made and try that.
Best Regards,
Nubz

Apple tv says it's loading but won't load purchased movies anymore.

Wi-fi and internet are connected. It did load a previously bought episode last night but when I tried to purchase another episode it failed to load, even though it said 1 minute to complete it never happened. This has been going on for a while so I'm desperate.

These issues can often be tied to the network.
Some common things to check
Current connection, use speedtest
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, it will help to see if there's interference
On Apple TV go to settings - gneerl - network - configure DNS. DNS should be set to automatic.

Windows boots but won't load (Black screen with cursor)

[Sorry for the long post, but I feel the need to fully explain my situation]
I have the following problem:
I turn on my PC, and Windows shows it's normal loading screen, after which it goes into a completely black screen, with just the mouse in the middle. By the cursor size I can tell that it's in a low resolution, probably 800x600 (compared to my usual 1920x1080). I am able to move the mouse around, but with no particular use without something to click on. No other keyboard input seems to work, except for Shift key 5 times, which brings up the Sticky Keys dialog box (with just "Yes" or "No" options, no other link); and Windows key+U which brings up the Ease of Access center. Ctr+Alt+Del does NOT work.
So far this is what I have tried (in chronological order):
Boot into Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Booting in low resolution video, Last known good configuration: all yield the same result as booting normally.
Repair your computer:
Startup Repair: Found Registry Errors (I realized and fixed this later on)
System Restore: Did not find any previous restore points (I know for sure that there are, I made a habit of making restore points regularly).
Windows Memory Diagnostics: Did not find errors.
Command prompt:
Ran chkdsk /f /r command, did not report errors.
Ran sfc /scannow : I don't remember the exact report, but it asked for a restart to finish repairing problems. I restarted, and ran the command again for the same result.
Forced the scan with: sfc /scannow /offbootdir=c:\ /offwindir=c:\windows , it found and repaired some errors, still could not load windows.
Ran Dell Startup Diagnostics, found no errors.
Ran Startup Repair again, found the registry errors again. I found the solution to this in a Microsoft Help forum ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ), and fixed the issue. I rebooted, but the problem persists.
Startup Repair now finds no errors. I tried System Restore again, it found 2 restore points dated AFTER my problem started. I decided to restore anyways, but neither of them worked.
I ran Windows Defender Offline:
Quick Scan: and found 2 threats and removed them.
Full System Scan: found 4 more threats, removed 2 of them, the other two couldn't be removed because they were within an ISO file.
I tried Steps 1, 2 and 3 again with no luck.
With each step I am aware that I'm closer to having to reinstall Windows, so I decided to see if I could still access my HHDD to save my personal files. I made a Linux live CD (with Ubuntu), but I am having trouble mounting the drives, because they are in a RAID0 configuration. "sudo dmraid -s" gives the following error: "ERROR: isw: wrong number of devices in RAID set "isw_dbdffjficc_ARRAY0" [1/2] on /dev/sdb".
Important Details:
I changed my graphics card about 4 months ago (an Nvidia GTX 750ti for an ATI Radeon HD 6450), and I was told that I may be running short with the Power Supply. The new card asks for a minimum of 450W and I think my PSU is 460W. This may or may not have something to do with this issue, I have no idea.
The RAID0 configuration of my 2 500GB Hard Drives brought me a lot of problems from day 1. One of the HDD would randomly fail (I am able to hear a different clicking sound when this happens), and the computer would crash. Upon startup, it would ask for a boot device. The Dell startup utility would then only recognize 1 of the drives, but would finish without errors. After a restart or two, all would be fine and windows would boot normally (aside from the usual error recovery screen) without any sign of corrupted data or anything. Like I said, this has been happening form the day my PC arrived, but restarting a couple of times always fixed it. As of now, both HHDD seem to be working fine, the Dell utility recognizes both of them, and does not find errors in any of them, and I can access any directory from the command prompt.
Is there anything else I should try before reinstalling Windows?
Before the install, I would really like to be able to recover my files (I have important documents from college), is there any way to do this?
Sorry again for the extremely long post (and for any language errors, English is not my native language), and thanks in advance.

Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
Use a Windows 7 Reinstallation DVD when installing ensure you select...
Select Custom: Install Windows only (advanced)
If you do not select any of the drive options and simply highlight the largest partition and select next:
Windows will dump all the old installation files in the Windows.old folder

Safari won't load Java applet? (latest Java 7 update 51)

Hello,
I am trying to use the following website:
http://kidsnvue.com
It is a portal that allows me to watch my child at daycare over the internet with a password. The trouble is that the video works with Java 7.
So every since I downloaded Java 7 update 51 (the latest update) then no matter how I configure my security settings I get the message "Application Blocked. Your security settings have blocked an untrusted application from running".
Even if I go into the security settings and try every different option like "Run in Unsafe Mode". I still get blocked from running this website.... This wasn't a problem with the previous versions of Java 7...
However Mavericks won't even let me run a previous version of Java. When I try to do that I get the message that my Java is not up to date and it tells me to update it before loading anything in Java...
Any advice on how I can get this website to run in Safari (or even in another browser)?
Thanks!

Hi Richie
the logs are pretty specific about what's happened...
Symbol not found: _ZNK3KJS9ObjectImp11hasPropertyEPNS9ExecStateEj
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
which is a long-winded way of saying that Javascript core is missing or corrupted. Likely due to a software update failing part way through.
Do you have any other browsers available on the iBook? if so it might be possible to attempt running an OS update which would replace the file.
The 'official' line is an archive & install, but armed with a 3rd party app it is possible to extract the file from your install disks and replace it manually - of course this does involve some messing in the System folder, but isn't all that difficult in my opinion.
You probably can't copy the file from another mac, unless you have access to another one running 10.4
Let us know how you'd like to proceed - I'm happy to give detailed instructions on replacing the file; it's not an uncommon problem that you have. I've posted several times before on this, so I'll try to find an earlier thread - at least that will give you an idea of what's involved.
Andy

After looking at movies shared with my imac on my ipad, there is no option to not share the home library. How do I go back to just the movies on my ipad.

I downloaded, through wi-fi sync, a slides how I made on my iMac to my iPad mini. 1) I didn't see the slides how in the video folder 2) I saw a share option in the video screen and chose my iMac Library. Then I saw the video, but I can't play it on my iPad unless I have iTunes connected on my iMac. 3). I cannot find in Preferences, or on the Video folder on my iPad a way to not share my library from my iMac.
Can anyone help me with this?

Can you attach a screenshot and maybe post a link?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.

Quicktime won't load - along with another program

Fairly new computer, programs already on machine work fine and load with no problem. I installed ULead VS 10+, installed no prob, but won't load. Switched to Adobe Premiere Elements 3.0, install fine, won't load. Downloaded the latest Quicktime, installed fine, won't load. Had my firewall/AV off when installing and trying to load. The weird thing is, I installed Abdobe Photoshop Elements 5.0 and it worked fine. Also installed Window Washer and it works fine. Trying to figure out if something on my machine is not allowing certain programs to load b/c of a Quicktime file?

Think I might've discovered part of the problem. I'm seeing a Quicktime for Windows (32 bit) under my Add/Remove Progams. Can't remove it there, tells me it can't find a current version of QT, if I have an older version I can use the QT installer to remove it. Tried using the windows uninstall through All Programs, but get same error message. Tried using Add/Remove to get rid of my current 7.1.3 version, but it comes up with a fatal error message. How can I remove the QT 32 bit and the QT 7.1.3? I think if I could get rid of all that and reinstall 7.1.3, that might solve my prob.
Dell Windows XP

PDF document won't load.

When I try to download a document from a website I get the yellow triangle of death along with an error mesage that says "could not find Acrobat External Window Handler" and the page won't load.

A server with the name http is impossible:
http://http//www.co.saint-croix.wi.us/currentevents.htm#Foreclosure

Zen Micro won't connect to computer with WMP 10 or higher instal

I've searched high and low for what could be causing this problem and nothing seems to be working. I just recently formatted my hard dri've. Before I formatted it my Micro was working just fine with the computer and I had WMP installed. After the format the computer won't load the device with WMP installed, so I rolled back to WMP 0 and it still wouldn't load the device. Then I rolled back to WMP 9, that comes with Windows XP, and it loads it perfectly fine. I've looked for plug-ins and hotfixes and everything else and absolutely nothing is working. Everytime I plug the device in with WMP 0 or loaded it brings up the "Found New Hardware" wizard and then it times out when trying to load the MTP driver. However, I plugged it into my friends computer and it loads perfectly fine. The firmware on the player is the latest because I had to update it for WMP before.
The thing that I don't get is why it has trouble loading the MTP driver with WMP 0 or installed but when WMP 9 is what is installed it loads it right away with no problems. Does anyone know what I can do??Also, since I formatted the hard dri've all my music is currently backed up on the Micro so I don't want to have to format it. And as far as I know WMP is the only way to get all of the songs off of the Micro, if there is any other way to get all of the songs off that would be helpful too. I can get most of the songs off just by drag and drop, but I can't get all of them for some reason. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!! thanks

I have had this problem creep up on me lately, but it doesn't happen every time though. I've been able to get around it by trying two or three times to reconnect it, but a couple of times it got right stubborn. In that situation, it seemed restarting my PC did the trick.
Not sure if that helps, but...

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

Apple TV won't load or play movies from my MBP library (through both airplay and homesharing), but will from my mac mini. Help!

I have been using my apple TV seamlessly with all my apple products (Mac Mini, iphone, MBP, ipad). Everything worked perfectly until recently (I noticed the issue about 3 weeks ago), when the apple TV won't load and play any movies from my iTunes library located on my MBP. The Library loads, and I can see everything, but as soon as I press play, the spinning load icon appears and doesn't stop. Same when I play movie from itunes directly and send it via airplay. Desktop mirroring no problem.
I have checked, and films are being played perfectly from my other devices, as does airplay and mirroring

Hello Tourneurm,
Thank you for contacting Apple Support Communities.
This article might be of use for your issue.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Section 8 seems to be most applicable.
8. Cannot access my library when my computer is asleep
For Apple TV to access your library while the host computer is asleep, "Wake for network access" must be turned on.
Open System Preferences > Energy Saver and select (enable) the "Wake for network access" option.
In addition, the network that the host computer and the Apple TV (2nd or 3rd generation) is connected to must support Wake on Demand feature. This works by partnering with a service running on your AirPort Base Station or Time Capsule called Bonjour Sleep Proxy.
This article could also be of use.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
Regards,
Jeff D.

Xcode 4.6.1 won't load .mov movies with latest iMac

Similar Messages

Maybe you are looking for