XCOPY and ROBOCOPY commands are OBSOLETE?

Okay, I've talked to a couple of TechNet Support Agents and scoured google, bing, and the TechNet forums to no avail.
Apparently, my situation is so different that it's impossible to fix unless I use some sophisticated script and such.
My problem:
I need to copy all the folders in a Directory, while excluding everything else (e.g. subfolders and files). In basic terms, just need empty folders with names of all the folders you would see in one directory, and by "folders" I mean just the ones
you see in the root level of that directory. In layman terms, I want all the main folders from one folder (without their contents) copied to another.
Apparently, xcopy and robocopy commands are somewhat broken in Windows 8.1
Also, I'm not going to be making a new folder of each from scratch, because there's about a hundred of them and each have long names to type in. As for subfolders, there's about 5k of them which is what I'm trying to avoid (not sure if mentioning this
is relevant or not).
the xcopy /t command still copies all subfolders (of course /xf * is needed but I need something else for the subfolders). Robocopy /LEV:0 or 1 doesn't do jack for avoiding subfolders either.
I wonder if there's a script someone knows about that I can use with a batch file to do what I want?

Never mind, I solved my problem after reading about a similar issue on superuser.com
It turned out to be a robocopy command combination: robocopy [source] [destination] /e /create /lev:2 /xf *

Similar Messages

XCOPY and ROBOCOPY hang if file is locked and Destination is network drive

Using XCOPY or ROBOCOPY to copy an Outlook .pst file while Outlook is open and has the file partially locked causes XCOPY and ROBOCOPY opertations to abort immediately and report the file as partially locked if the Destination is another drive on the same
PC or a USB drive. But if the Destination drive is a network share (e.g.
\\Whatever\Whatever) then both XCOPY and ROBOCOPY hang forever - even after Outlook is closed and the file lock is released. The old DOS command COPY properly recognizes the lock abd aborts regardless of the Destination location. But COPY won't
replicate the file Create/Modify dates on the Destination location as XCOPY and ROBOCOPY do. I'm using straight DOS from a .bat file
Anyone have any suggestions as to how to recognize this condition and avoid or correct it? Sorry if this is the wrong forum. I didn't know where else to post this.

I really don't know why I bother with the Microsoft forums when facing technical issues with Microsoft products. I should really just write an Adblock script that takes Google results for this site out of suggested search results.
Marking this sort of unrelated comment as an "answer" is what I've sadly come to expect of the Microsoft forums. I take it your personal worth as a moderator is measured in some way by how many such 'answers' you produce.
I, and I'm sure many others, would prefer it if you were just honest enough to say "we don't know" rather than pretend that issues don't exist like this. Trying to create an impression that you've provided help when you have not is very probably what keeps
you from ever improving these forums.
RoboCopy is NOT a script it is a system utility. These forums are not customer support or a help desk.
The answers to this question are well known and should be asked for in the correct forum. If you really need the answer to this particular question then just read the help for RoboCopy. It is in there very explicitly.
When you call you PC vendor for support they will usually ask you to check to see if the PC is plugged in. This is standard procedure. It is like pointing out to new PC users that they should also call the correct vendor and give correct information.
Posting a utility question in a scripting forum is the same as giving bad information about your problem. After you have more experience with the technology you will see the importance of this.
¯\_(ツ)_/¯

XCOPY and ROBOCOPY hang if file is locked nd Destination is a network drive

This question was first posted to the Scripting Forum. They indcated I should switch to the Plarform Forum. I'm hoping this is the right place. So ...
On my home PCs, when using XCOPY or ROBOCOPY to copy an Outlook .pst file while Outlook is open and has the file partially locked causes XCOPY and ROBOCOPY opertations to abort immediately and report the file as partially locked if the Destination is another
drive on the same PC or a USB drive. That's good, and is as I expect. But if the Destination drive is a network share (e.g.
\\Whatever\Whatever) then both XCOPY and ROBOCOPY hang forever - even when specifying zero retries in ROBOCOPY and even after Outlook is closed and the file lock is released. The old DOS command COPY properly recognizes
the lock and aborts regardless of the Destination location. But COPY won't replicate the file Create/Modify dates on the Destination location as XCOPY and ROBOCOPY do. I'm using straight DOS from a .bat file
Anyone have any suggestions as to how to recognize this condition and avoid or correct it?

Ivan-Liu: Thanks for your input. The thread you referred me to looked promising, but ultimately was not a solution.
It focuses on ROBOCOPY and the use of an elevated command prompt.
First of all, as I initially reported, I found the same “hang” behavior with ROBOCOPY as with XCOPY.
Secondly, I prefer to avoid ROBOCOPY because one of the PCs I am trying to support is still running a version of Windows XP that does not make ROBOCOPY available to me.
I have not yet tried the operation when using “run as an administrator,” but my own login has administrator privilege and still exhibits the problem.
Moreover, the operation (both XCOPY and ROBOCOPY) always completes without issue when the .pst file is NOT locked.
The hang-up occurs only when I forget to close Outlook before initiating the XCOPY or ROBOCOPY operation.
I still need to confirm that the behavior is the same whether using a UNC pathname or a mapped drive name.
But my memory is that the copy operations still hang if the file is locked when the copy operation is initiated.
The two main PCs I use are running Windows-7 (one 64-bit and one 32-bit.)
The .pst file in question varies, but is typically between 100MB and 400MB.
The behavior is consistent, regardless of size. I have not tested the behavior with smaller .pst files or with other locked files of any size.
I’m now of the belief that my issue relates to the specific storage solution I have in place, which consists of an external 1TB Seagate USB drive plugged into a Belkin router, which subsequently makes the drive visible to my Windows home network as a network
drive. I don’t know if it’s a Seagate issue or a Belkin issue.
I’m still working to rule out Belkin by connecting the Seagate drive directly to a PC, but have not had time to complete that test yet.
I suspect Belkin, though, because attempts to XCOPY or ROBOCOPY to a thumb drive will abort immediately and report the file is locked.
Plus, I also have a separate problem wherein certain .xlsm files copied to the Seagate drive (when it is connected to the Belkin router) always report that they are corrupt if/when I attempt to use Excel to open the Seagate copy.
Excel always seems to successfully “repair” the files.
But I’ve been unable to discover a cause for that issue too. Testing has shown that behavior to be consistent with both UNC and mapped drive names.

After i have upgraded to snow leopard my copy and paste commands are not working

hello, i am very frustrated now, it's been two weeks since i have upgraded my mac os to snow leopard but the copy and paste commands are no longer working. i have searched thru the communities but i cannot find something that answers my query. please help as i do not want to resort to downgrading back my OS. thanks in advanced.

Maybe here http://support.apple.com/kb/HT3964
If you do not have a removable battery
power down, power back up and hold the following keys, left side shift, control, option. Hold these keys till the gears stops spinning, release. Reboot.

In what all Hyper-V related scenarios SCSI 2 and 3 commands are fired.

I am performing Hyper-V operations on a remote disk which is added to the hyper-V.
What to know if SCSI 2 and 3 commands like register, reserve etc. gets fired during hyper-V operations like creating VM's, checkpoint etc.
Please share any other Hyper-V related operations that can trigger SCSI commands.
Thanks
Shashank

Please post in the Hyper-V forum here:http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
You'll have a much better chance at getting an answer.
This forum is for the product Virtual Server 2005.

Why New-SPConfigurationDatabase and other commands are not recognized?

Hello Community
    In Sharepoint 2013 Server I am an Administrator and in
SQL Server 2012 I am a securityadmin, db_owner and sysadmin. In the
I am also a domain user and domain administrator.
    Below is what is returned from the Powershell command I entered:
PS C:\> $PSVersionTable.psversion
Major Minor Build Revision
3      0      -1     -1
    I am running WS2012 and the prerequisites for Sharepoint 2013 Server have been installed.
    However when I run the Powershell script to configure the
New-SharepointFarm the command fails with all of the Powershell
commands returning the following error message:
PS C:\scripts> .\New-SharePointFarm.ps1
Configure Database
New-SPConfigurationDatabase : The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At C:\scripts\New-SharePointFarm.ps1:20 char:1
+ New-SPConfigurationDatabase -DatabaseName $ConfigDB -DatabaseServer $DatabaseSer ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (New-SPConfigurationDatabase:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
    As you can see the error says: "The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet"
but as you can see $PSVersionTable.psversion shows the Powershell version I am using so my question is:
    How come when I run commands like "New-SPConfigurationDatabase" they are not recognized?
    Thank you
    Shabeaut

Hello Alex
    I should have included that while troubleshooting I did that too.
The results of "Add-PSSnapin Microsoft.SharePoint.PowerShell" were:
        Add-PSSnapin : No snap-ins have been registered for Windows PowerShell version 3
    and if I try to run .\New-SharePointFarm.ps1 again I get the same error:
        The term 'New-SPConfigurationDatabase' is not recognized as the name of a cmdlet,
    Shabeaut

ABAP commands are obsolete.

Hi all,
Currently my firm is doing the 4.6C to ECC6 upgrade, there's a few programs having obsolete errors and I'm tasked to correcting the coding of this certain program. Here is the coding and the errors i encounter:
report YPU0014 line-size 360
               line-count 65
               no standard page heading.
selection-screen begin of block b1 with frame title text-010.
select-options: s_banfn for eban-banfn,                "PR No
                s_badat for eban-badat,                "PR Create Date
                s_ekgrp for eban-ekgrp,                "PR Purch Group
                s_frgkz for eban-frgkz,                "PR Rel Ind
                s_werks for eban-werks,                "PR Plant
                s_matnr for eban-matnr,                "PR Material
                s_lgort for eban-lgort.                "PR Stor Loc
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-020.
parameters:     prs01 radiobutton group prst default 'X',
                prs02 radiobutton group prst,
                prs03 radiobutton group prst.
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-030.
parameters:     pos01 radiobutton group post default 'X',
                pos02 radiobutton group post,
                pos03 radiobutton group post.
selection-screen end of block b3.
* INTERNAL TABLES
data: begin of ITAB occurs 0,   *(error: Tables with headers are no longer supported in the OO context.)*
            BANFN LIKE EBAN-BANFN,            "PR No
            BADAT LIKE EBAN-BADAT,            "PR Date
            MATNR LIKE EBAN-MATNR,            "Material No
            TXZ01 LIKE EBAN-TXZ01,            "Short Text
            LFDAT LIKE EBAN-LFDAT,            "Delv Date
            MENGE LIKE EBAN-MENGE,            "Requested Qty
            MEINS LIKE EBAN-MEINS,            "Unit of Measure
            PREIS LIKE EBAN-PREIS,            "Price Unit
            WAERS LIKE EBAN-WAERS,            "Currency
            AFNAM LIKE EBAN-AFNAM,            "Requistioner
            BNFPO LIKE EBAN-BNFPO,            "Item No
            BEDAT LIKE EBAN-BEDAT,            "PO Date
            BSART LIKE EBAN-BSART,            "Doc Type
            BSMNG LIKE EBAN-BSMNG,            "Ordered Qty
            MEIN2 LIKE EBAN-MEINS,            "PR UOM
            EBELN LIKE EBAN-EBELN,            "PO No
            EBELP LIKE EBAN-EBELP,            "PO Item No
            EKGRP LIKE EBAN-EKGRP,            "Purch Group
            EKORG LIKE EBAN-EKORG,            "Purch Org
            EMLIF LIKE EBAN-EMLIF,            "Vendor
            FRGDT LIKE EBAN-FRGDT,            "Release Date
            FRGGR LIKE EBAN-FRGGR,            "Release Grp
            FRGKZ LIKE EBAN-FRGKZ,            "Release Ind
            FRGZU LIKE EBAN-FRGZU,            "Release Stat
            INFNR LIKE EBAN-INFNR,            "Info Rec
            KNTTP LIKE EBAN-KNTTP,            "Acct Assgn Cat
            LGORT LIKE EBAN-LGORT,            "Storage Loc
            LOEKZ LIKE EBAN-LOEKZ,            "Deld Indicator
            GSFRG LIKE EBAN-GSFRG,            "Overall PR Rel
            STATU LIKE EBAN-STATU,            "Processing Stat
            WAER2 LIKE EBAN-WAERS,            "Currency
            WEBAZ LIKE EBAN-WEBAZ,            "GR Process Time in Days
            WERKS LIKE EBAN-WERKS,            "Plant
       end of ITAB.
data: prfnd(1) type c,
      pofnd(1) type c.
*top-of-page
top-of-page.
format color col_heading.
     write: /1 sy-repid, 150 'Allied Technologies (S) Pte Ltd',
            314 'Date:',
            320 sy-datum.
     write: /1 sy-uname,
            160 'PR Listing',
            314 'Time:',
            320 sy-uzeit.
     write: 330 'Page:', sy-pagno.
     uline.
     write : /1 'PR No', 11 'PR Date', 22 'Material', 42 'Short Text',
             65 'Deld Date', 84 'Qty Reqd', 95 'UOM', 103 'Price Unit',
             115 'Curr', 120 'Requisitioner', 134 'Itm No',
             141 'PO Date', 152 'DocType', 161 'Ord Qty', 175 'UOM',
             180 'PO No', 192 'Itm No', 200 'PurGrp',
             208 'PurOrg', 216 'Vendor', 228 'Rel Date',
             239 'RelGrp', 246 'RelInd', 254 'RelStat',
             263 'Info Record', 278 'AA Cat', 285 'Str Loc',
             295 'Deleted', 304 'Overall Rel', 316 'Procd Stat',
             328 'Curr', 334 'GR Time', 344 'Plant'.
uline.
skip.
end-of-selection.
perform get_data.
perform output_data.
*      Form get_data
form get_data.
clear itab.
select * from eban where banfn in s_banfn and   *(error: SELECT without an INTO clause is not supported in the OO context. Use "SELECT... INTO wa".)*
                           badat in s_badat and
                           frgkz in s_frgkz and
                           werks in s_werks and
                           matnr in s_matnr and
                           lgort in s_lgort and
                           ekgrp in s_ekgrp.
      move 'N' to prfnd.
    if prs01 = 'X' and eban-loekz = 'X'.
      move 'Y' to prfnd.
      perform get_porecord.
    endif.
    if prs02 = 'X' and eban-loekz ne 'X'.
       move 'Y' to prfnd.
       perform get_porecord.
    endif.
    if prs03 = 'X'.
       move 'Y' to prfnd.
       perform get_porecord.
    endif.
    if prfnd = 'Y' and pofnd = 'Y'.
        move-corresponding eban to itab.
        select single * from ekko where ebeln = eban-ebeln.    *(error: SELECT without an INTO clause is not supported in the OO context. Use "SELECT... INTO wa".)*
          if sy-subrc = 0.
            move ekko-lifnr to itab-emlif.
          endif.
        append itab.    *(error: An explicit work area is necessary in the OO context. Use " APPEND wa TO ITAB [SORTED BY])*
        clear itab.
    endif.
endselect.
endform.
form get_porecord.
      move 'N' to pofnd.
      if pos01 = 'X' and eban-statu ne 'B'.
         move 'Y' to pofnd.
      endif.
      if pos02 = 'X' and eban-statu = 'B'.
         move 'Y' to pofnd.
      endif.
      if pos03 = 'X'.
         move 'Y' to pofnd.
      endif.
endform.
* Output selected records to screen
form output_data.
sort itab by banfn badat matnr.
loop at itab.               *(error: At "LOOP AT ITAB", one of the additions "INTO", "ASSIGNING", or "TRANSPORTING NO FIELDS" is required. )*
    write: /1(10) itab-banfn, 11(10) itab-badat, 22(18) itab-matnr,
           42(20) itab-txz01, 65(10) itab-lfdat,
           78(15) itab-menge decimals 2,
           95(3) itab-meins, 100(14) itab-preis, 115(3) itab-waers,
          120(12) itab-afnam, 134(5) itab-bnfpo, 141(10) itab-bedat,
          152(4) itab-bsart, 158(15) itab-bsmng decimals 2,
          175(3) itab-mein2, 180(10) itab-ebeln, 192(5) itab-ebelp,
          200(3) itab-ekgrp, 208(4) itab-ekorg, 216(10) itab-emlif,
          228(10) itab-frgdt,
          240(2) itab-frggr, 248(1) itab-frgkz, 256(8) itab-frgzu,
          266(10) itab-infnr, 280(1) itab-knttp, 287(4) itab-lgort,
          298(1) itab-loekz, 308(1) itab-gsfrg, 320(1) itab-statu,
          329(5) itab-waers, 335(3) itab-webaz, 345(4) itab-werks.
endloop.
skip 1.
write: /25.
May i know how do i recode the areas with the errors?
Thank you for all the help i could get.

From this message ("error: Tables with headers are no longer supported in the OO context."), I'm thinking you are pasting this code inside a Class method. Do not.
But if you intend to make this as an individual report, it should work. Should it still show the same errors as "error: At "LOOP AT ITAB", one of the additions "INTO", "ASSIGNING", or "TRANSPORTING NO FIELDS" is required.", please add the TABLES statement at the top of your code.
(to show:)
report YPU0014 line-size 360 line-count 65 no standard page heading.
TABLES:
    itab
selection-screen begin of block b1 with frame title text-010.
Or better yet, see these changes
OLD
       data: begin of ITAB occurs 0,   *(error: Tables with headers are no longer supported in the OO context.)*
            BANFN LIKE EBAN-BANFN,            "PR No
            BADAT LIKE EBAN-BADAT,            "PR Date
            MATNR LIKE EBAN-MATNR,            "Material No
       end of ITAB.
NEW
       TYPES:
           begin of STAB,
            BANFN LIKE EBAN-BANFN,            "PR No
            BADAT LIKE EBAN-BADAT,            "PR Date
            MATNR LIKE EBAN-MATNR,            "Material No
          end of ITAB
       DATA:
         itab TYPE TABLE OF stab
As for the SELECT statements
OLD
    select * from eban where banfn in s_banfn and...
    " *(error: SELECT without an INTO clause is not supported in the OO context. Use "SELECT... INTO wa".)*
NEW
    DATA: wa_eban TYPE eban.
    select * from eban INTO wa_eban where banfn in s_banfn and...
    " and replace all uses of "eban" inside the select loop with wa_eban
   if prs01 = 'X' and wa_eban-loekz = 'X'.
    " DO THE SIMILAR THING WITH THE OTHER SELECT STATEMENTS
As for itab
OLD
loop at itab.
*(error: At "LOOP AT ITAB", one of the additions "INTO", "ASSIGNING", or "TRANSPORTING NO FIELDS" is required. )*
NEW
DATA: wa_tab LIKE LINE OF itab.
LOOP AT itab INTO wa_tab.
    " replace all occurences of tab with wa_tab inside the loop
   write: /1(10) wa_tab-banfn, 11(10) wa_tab-badat,...
ENDLOOP.
would really make me smile today
Edited by: Thomas Zloch on Jul 13, 2010 11:45 AM

The mouse and the trackpad are obsolete, Capacitive touchscreen the way ?

My shoulders ache and my hand cramps all because of these 2 legacy devices.
The touch screen on the Ipad and on other devices like Nintendo DSI, Paceblade PaceBook, Even the humble hardworking automativ teller at Tescos all do the job in a more straightforward and accessible way.
Is it posible to use the new link that disp;ays the ipad screen on a big display 2 ways so that the scomputer monitor can display on the ipad and respond to touch screen commands from the ipad screen?

I had to rush earlier, but what i have noticed is that cloud computing gives me exactly that functionality i want between the ipad and my desktop, so i know it can be done in that way through an app.
Is there an app that already does this? By this i mean links screen to touchscreen so touch screen can control the desktop, making a trackpad and mouse obsolete?

So am I correct in assuming that all of the Ipod touch 1st and 2nd gen are obsolete?

I can't seem to download any apps for my second generation ipod touch. I have looked on forums and searched the internet on what to do with no avail. Please do not send me any messages saying that I cannot go any higher than iOS 4.2.1 because I know this and you will be wasting my time. Basically my question is what do the people do that own older ipods? Do we simply toss them out? I think that this is a little ridiculous, I paid for a product that I can no longer use simply because it is older.

"Do we simply toss them out?"
No.
"I think that this is a little ridiculous"
Since you don't just "throw them out", there is no "ridiculousness".
"I paid for a product that I can no longer use simply because it is older."
Baloney. You can use the product, until it's no longer operational. If it breaks, you can have it repaired outside of the warranty.

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

I´d like to cancel my big CC plan and switch to photo plan. I need Ohotoshop, Lightromm and Acrobat, the rest are obsolete to me

Hi Tore,
You can follow the article: Cancel your membership or subscription | Creative Cloud to cancel your subscription.
Let us know if you still need any help with that.
Thanks,
Ratandeep Arora

IMAP commands are very slow and end up having the connection terminated by the server

Could you please help us on this topic ?
https://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/imap-commands-are-very-slow-and-end-up-having-the/652390ea-9658-4db6-ae2c-c8fff12a9142

Hi,
Sorry that I am not familiar with Outlook.com account and its server connection. This forum focuses on user clients issue when connect to Exchange server 2013 which is generally an on-premises mail server in domain environment.
Since your issue is related to Outlook.com account, I suggest we can also ask a question in Microsoft Outlook.com forum for more help:
http://answers.microsoft.com/en-us/outlook_com/forum?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1418613687794
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Winnie Liang
TechNet Community Support

Robocopy command and hidden files

Hi
To ensure that the robocopy command copy
also hidden files of a DVD, there
need some particular option or not?
Thanks
Bye
Balubeto

by default, robocopy does copy hidden files.
You can specify an attribute filter:
/IA:[RASHCNETO] :: Include only files with any of the given Attributes set.
/XA:[RASHCNETO] :: eXclude files with any of the given Attributes set.
get more info by running robocopy /?
MCP/MCSA/MCTS/MCITP

In ECC 6.0 I am getting Slin Error -ABAP command is obsolete

Hi All,
In Hr ABAP we will start basic coding with
TABLES pernr .
infotypes:0002.
By using this I am getting the following SLIN Error :
Program: ZHCP0026 Row: 32
he current ABAP command is obsolete
Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary
types, not "LIKE" or "STRUCTURE".
nternal Message Code: MESSAGE G/B
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
INFOTYPES : 0380,
The current ABAP command is obsolete
Tables with headers are no longer supported in the OO context.
Internal Message Code: MESSAGE G1D
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
Can some one help me , how to rectify this slin error ?
Thanks,
Suresh.
Edited by: suresh kumar on Feb 25, 2009 2:22 PM

Hi Suresh,
Am too facing the same problem. if you could find a solution, pls let me know.

XCOPY and ROBOCOPY commands are OBSOLETE?

Similar Messages

Maybe you are looking for