Xdo delivery config file: unknown server elements

I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.

Similar Messages

TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

Dear Experts,
I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
‘%Error: Config file transfer failed – Unknown error –refer to log
Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
WLC code: 7.4.100.0
PFA as the error snippet.
Thanks and Regards,
Adnan

Hi Kaneswaran,
Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this.
Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue.
Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
Best Regards,
Muhammed Adnan

WebLogic Server 10.3.4 external config files

Hey,
i have a question. I have external configuration files, and i dont know where to place, or better how to add the path where the configurations files located to WebLogic Servers classpath ?
I worked with JBOSS and there i added some lines in the start script. In glassfish there i can make it via administration gui.
The files are *.cfg files and the error output is this:
PATH_INSTANCIA:
log4j:ERROR Could not read configuration file [nullCONFIG.cfg].
java.io.FileNotFoundException: nullCONFIG.cfg (No such file or directory)
Thanks in advance :)

Hi Jack,
You will have to add the folder where the config file is present to the WLS classpath. Modify the CLASSPATH in setDomainEnv.cmd/setDomainEnv.sh (Take a backup of these files - just in case :) ) to include the config file folder path.
And restart the server and WLS should be able to pick the file.
In your code you can have the line as follows
Thread.currentThread().getContextClassLoader().getResource("filename")As you have already added the folder to the classpath, it will be able to get the reference to the file.
Thanks,
Patrick

Deploying 2005 package to server with manifest file, but deployment wont see my config file?

I have a package working and Ive installed it on one server, but cant seem to recall how I got it to see the config file Im using. I tried using a manifest file but it simply wont pick up the config file when running through the wizard. All Im
doing is copying over the manifest file to the server, remoting into the server, then running the package deployment wizard from there. Why would the config file not be seen?

Hi Shiftbit,
The issue occurs because you didn’t copy the XML Configurations file with the Manifest file and the packages to the new server. To install the manifest file in a new server, we must copy all of the following files:
Manifest file
.dtsx files of the packages
XML Configurations files
If we only copy the manifest file, the deployment will succeed without the package configurations stage but no packages will be installed in reality. If we only copy the Manifest file and the .dtsx files of the packages, the deployment succeeds without the
package configurations stage, and the packages will be installed successfully actually. Only when we copy all of the three type files, the deployment can recognize the package configurations successfully and install the packages properly.
Regards,
Mike Yin
TechNet Community Support

XSL-Maps: "Elements to Ignore Config File" broken

Hi,
We use Jdev Studio Edition 10.1.3.3.0 build 4157 in a SOA project.
The JDev XSL mapper displays only simply xslt structures.
Often, the xsl map generation fails after manually editing the code.
This applies to 100% valid xsl, sometimes restarting JDev helps.
According to:
http://download.oracle.com/docs/cd/E11036_01/doc.1013/e10295/xslt_mpr.htm#CFAIBFFJ ,
elements can be ignored to have JDev display a partial xsl map.
However, that does not work as described in the documentation.
Elements within <elements-to-ignore> still cause map generation to fail!
How can we get JDev to ignore code parts it cannot display?

Hi,
Thanks for your reply. When I created extensions.xml (as advised by you) and tried specifying it as User Defined Extension Functions Config file, I get the following error:
Invalid User Extension Functions Config File
Invalid value 'object' for attribute:'as' line 5 column 52
i.e. the following line:
<function name="extensions:getMSPDate" as="object">
Any pointers on what will be the correct value for attribute 'as' for element 'function'?
Also, what is the default namespace being used in the extensions.xml?
Is there a link for more documentation on the format for extensions.xml?

IChat Server Config File

Where is the manual config file for this service located?

Choose Go to Folder from the Finder's Go menu and provide /etc/jabber/ as the path; the file may be named jabber.xml.
(34893)

List the files from server

Hi Experts,
I have a requirement in my application, that list out the files from the server in table and also delete the file. Pls specify the code.
Regards,
Kiruba.R

Hi
List all the files from server
public void listServerFiles( )
    //@@begin listServerFiles()
    wdContext.nodeFiles().invalidate();
    IPrivateExperimentView.IFilesElement element;
    java.io.File file = new java.io.File( "D:\\Test");
    File list[] = file.listFiles();
    for( int i = 0; i < list.length; i++)
         element = wdContext.createFilesElement();
              element.setFileName( list[ i].getName());
         wdContext.nodeFiles().addElement( element);
    //@@end
Display the selected file
public void onActiondownload(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiondownload(ServerEvent)
    IWDResource resource;
    String name = wdContext.currentFilesElement().getFileName();
    String path = "D:\\Test\\" + name;
     InputStream stream;
     try {
          stream = new FileInputStream(path);
          resource = WDResourceFactory.createResource( stream, name,
                              WDWebResourceType.UNKNOWN, true);
          stream.close();
          wdComponentAPI.getWindowManager()
                         .createNonModalExternalWindow( resource.getUrl( 0), name).show();
     } catch (FileNotFoundException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
     } catch (IOException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
Delete the selected file
public void onActiondeleteFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiondeleteFile(ServerEvent)
    String path = "D:\\Test\\" + wdContext.currentFilesElement().getFileName();
    File file = new File( path);
    file.delete();
    listServerFiles();
    //@@end
vinod

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

HttpBinding not working when HttpHandler tag is present in web.config file

Hi,
I tried to add a WCF service in WCF Test Client using HttpBinding. But I couldn't add the service. I got the below error.
There was an error downloading 'http://localhost/Services/PostOffice.svc/_vti_bin/ListData.svc/$metadata'.
The request failed with an empty response.
Metadata contains a reference that cannot be resolved: 'http://localhost/Services/PostOffice.svc'.
The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.
If the service is defined in the current solution, try building the solution and adding the service reference again.
I removed the below code in the Web.Config, later I was able to add the WCF service to the WCF test client.
<httpHandlers>
<add type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" path="Telerik.ReportViewer.axd" verb="*" validate="true" />
</httpHandlers>
I'm not sure with the above code. Could you please let me what is the reason behind it and what is the use of above code and if I remove it how does it affect my application.
Thanks in advance.
Sandeep

Hi Sandeep Pinniti,
Please try to add the following config in your config file:
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
The validateIntegratedModeConfiguration="false" will allow us to keep our httpHandlers section populated without throwing an error. And I have tested in my side,
it works fine.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

XML file in the form of .config file how to convert it to class and store it in single object

Hi,
I have a config file in which i have to convert it to class and get an object.
example:
<?xml version="1.0" encoding="utf-8" ?>
<xyz xmlns="">
<Container name ="Basic">
<Connectivity user="" server="" protocol="udp"/>
<Connectivity user="" server="" protocol="udp"/>
</Container>
<Container name ="Cp">
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
<domain name="audio">
<section name="headset">
<setting name="audio_in_agc_enabled " value="1"/>
</section>
<section name="incoming">
<setting name="use_agc" value="1"/>
</section>
<section name="vad">
</section>
</domain>
<domain name="system">
<section name="qos">
<setting name="audio" value="tos 46"/>
</section>
<section name="dtmf">
<setting name="force_send_in_band" value="0"/>
<setting name="minimum_rfc2833_play_time" value="40"/>
</section>
<section name="network">
<setting name="dtx_enabled" value="0"/>
</section>
<section name="diagnostics">
<setting name="enable_logging" value="1"/>
<setting name="log_level" value="Error"/>
</section>
<section name="general">
<setting name="add_OS_version_to_user_agent_header" value="1"/>
</section>
<section name="indialog_notify">
<setting name="enable_indialognotify" value="1"/>
</section>
</domain>
<domain name="rtp">
<section name="2833">
<setting name="enabled" value="1"/>
<setting name="packet_time_in_ms" value="60"/>
<setting name="payload_number" value="101"/>
</section>
<section name="inactivity">
<setting name="timer_enabled" value="0"/>
</section>
</domain>
<domain name="proxies">
<section name="proxy0">
</section>
<section name="proxy1">
</section>
</domain>
<domain name="ggg">
<section name="device">
<setting name="use_headset" value="1"/>
<setting name="rrr" value="1"/>
<setting name="eee" value="480"/>
<setting name="eme" value="hhh"/>
<setting name="headset_name" value="vvv"/>
<setting name="manual_audio_devices_configure" value="0"/>
<setting name="audio_in_device" value=""/>
<setting name="audio_out_device" value=""/>
<setting name="ringer_device" value=""/>
</section>
<section name="system">
<setting name="export_settings" value="EndpointSettings.xml"/>
<setting name="enable_export_settings" value="0"/>
<setting name="log_level_AbstractPhone" value="0"/>
<setting name="log_level_Audio" value="0"/>
<setting name="log_level_Auto Configuration" value="0"/>
<setting name="log_level_CCM" value="0"/>
<setting name="log_level_Conferencing" value="0"/>
<setting name="log_level_Contacts" value="0"/>
<setting name="log_level_DNS" value="0"/>
<setting name="log_level_GUI" value="0"/>
<setting name="log_level_Jitter" value="0"/>
<setting name="log_level_Licensing" value="0"/>
<setting name="log_level_Media" value="0"/>
<setting name="log_level_Privacy" value="0"/>
<setting name="log_level_RTP" value="0"/>
<setting name="log_level_STUN" value="0"/>
<setting name="log_level_Security" value="0"/>
<setting name="log_level_Storage" value="0"/>
<setting name="log_level_Transport" value="0"/>
<setting name="log_level_USB Devices" value="Info"/>
<setting name="log_level_Utilities" value="0"/>
<setting name="log_level_Video" value="0"/>
<setting name="log_level_Voice Quality" value="0"/>
<setting name="log_level_XMPP" value="0"/>
<setting name="log_level_Endpoint" value="6"/>
</section>
<section name="beeptone">
<setting name="play_locally" value="0"/>
<setting name="enable_beeptone" value="1"/>
<setting name="beeptone_file" value="beep.wav"/>
<setting name="beeptone_timeout" value="30000"/>
</section>
<section name="dtmf">
<setting name="play_locally" value="1"/>
<setting name="pause_start_stop_dtmf" value="100"/>
</section>
<section name="control">
<setting name="auto_answer" value="0"/>
</section>
<section name="ctrol">
<setting name="auto_ans" value="0"/>
</section>
</domain>
</settings>
</Container>
</xyz>
Please help me out in creating an object from it.
Thanks,
Hiranmayee

It's one of those things you usually start from the other end.
IE with a class and then serialise / deserialize to xml.
Because you have a namespace in there:
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
I think you will find linq to xml will have issues with that.
You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
Why do you want to turn that into an object?
By the way.
This isn't a wpf question and you should probably have posted it on the c# forum.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support

Error in File UNKNOWN.RPT: The request could not be submitted for backgroun

I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
    Trust level: Full
    Application Virtual Path: /
    Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
    Machine name: FTG2009
Process information:
    Process ID: 3644
    Process name: w3wp.exe
    Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
    Exception type: CrystalReportsException
    Exception message: Load report failed.
Request information:
    Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
    Request path: /cgi-bin/crystaltest.aspx
    User host address: 70.173.237.72
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
    Thread ID: 5
    Thread account name: FTG2009\IWPD_1(yanoshftg)
    Is impersonating: False
    Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
   at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
    Sub CreateReport()
        Dim myReport As New ReportDocument
        'Try
        myReport.Load(Server.MapPath("CrystalReport.rpt"))
        'Catch ex As Exception
        'MsgBox(ex.InnerException.ToString)
        'End Try
        Dim g As Guid = Guid.NewGuid
        Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
        'Try
        Dim CrExportOptions As ExportOptions
        Dim CrDiskFileDestinationOptions As New _
        DiskFileDestinationOptions()
        Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
        CrDiskFileDestinationOptions.DiskFileName = _
                                    Server.MapPath(woPath)
        CrExportOptions = myReport.ExportOptions
        With CrExportOptions
            .ExportDestinationType = ExportDestinationType.DiskFile
            .ExportFormatType = ExportFormatType.PortableDocFormat
            .DestinationOptions = CrDiskFileDestinationOptions
            .FormatOptions = CrFormatTypeOptions
        End With
        myReport.Export()
        'Catch ex As Exception
        'MsgBox(ex.ToString)
        'End Try
        Response.Redirect(woPath)
    End Sub

Error in the input config file

Continue message previous.
I need deploy my application "notitia". Return message:
Failed to deploy web application "notitiancm". Error in the input config file. Attribute Options is a single value attribute.

Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken

Error in running package with config file

I have a 2012 package and it is referring to a config file which has the DB connectionstring. This config file was created through the "Package Configuration Organizer". When I execute the package through VS 2012, it works fine(Reads the config
from config file), but I get the below error when I run from DTEXEC.
Command:
C:\Program Files\Microsoft SQL Server\110\DTS\Binn>dtexec /f "C:\user\admin\Test\Pack1.dtsx /Conf "C:\user\admin\Test\P1.dtsconfig"
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 4:13:06 PM
Warning: 2013-12-13 16:13:07.19
Code: 0xC0048000
Source: Process File Process File (SSIS.Pipeline)
   Description: The registry key "SOFTWARE\Classes\CLSID\{7F88F654-4E20-4D14-84F4-AF9C925D3087}\DTSInfo" cannot be opened.
End Warning
Warning: 2013-12-13 16:13:07.19
   Code: 0x8004801E
   Source: Process File Process File (SSIS.Pipeline)
   Description: Cannot find the "CurrentVersion" value for component {7F88F654-4E20-4D14-84F4-AF9C925D3087}. The CurrentVersion value for the
t cannot be located. This error occurs if the component has not set its registry information to contain a CurrentVersion value in the DTSInfo
This message occurs during component development, or when the component is used in a package, if the component is not registered properly.
End Warning
Progress: 2013-12-13 16:13:08.00
   Source: Select the latest Vendor file from mailMonitor
   Executing query "select top 1 (ea.attachment_path), ea.attachment_f...".: 100% complete
End Progress
Progress: 2013-12-13 16:13:08.03
   Source: Check if file has already been processed
   Executing query "select count(*) from myTable where FileName...".: 100% complete
End Progress
Error: 2013-12-13 16:13:08.03
   Code: 0xC000F427
   Source: Unprocessed File? (This is an Expression Task)
   Description: To run a SSIS package outside of SQL Server Data Tools you must install Unprocessed File? of Integration Services or higher.
End Error

Please see if this link helps -
http://dba.stackexchange.com/questions/49786/error-to-run-a-ssis-package-outside-of-sql-server-data-tools-you-must-install
Narsimha

Xdo delivery config file: unknown server elements

Similar Messages

Maybe you are looking for