Xellerate setup with JBOSS

I'm using JBOSS for the application server and in the Xellerate install guide it states that you need to configure JBOSS for Xellerate but does not give any detail. What configuration changes in JBOSS are needed?

in my experience no additional changes are needed for JBoss configuration. Except maybe log levels and to clean up deploy directory (described in Best Practices document).

Similar Messages

Using Microsoft Network Load Balancing for Livecycle ES 2/2.5 with JBoss clustering?

Hi,
Has anyone tried using Microsoft NLB for Livecycle with JBoss clustering and get it working? Able to login to livecycle's admin ui page with the NLB IP
My enviroment:
- 2 jboss application server (different IP address)
- Horizontal clustered
- LC ES2 installed on both servers
For those who setup successfully, hope you can share your experience.
Thank you.

Thanks!
Just a few more questions...hehehe
In the document: Configuring LiveCycle ES2 Application Server Clusters Using JBoss.
Page 35 item 3.4. Have you had to configure the Caching Locators? If yes, where did you put them, in only one machine or in all of the nodes?
On page 29, iten 2.7 (Testing the JBoss Application Server cluster) says that for testing we can run the command specifying the server, in my case is:
run.bat -c lc_sqlserver_cl -b <ipAddress>
But in the Appendix C: Configuring JBoss as a Windows Service, it says: call run.bat -c all -b <ipAddress>
So when should I start JBoss with "lc_sqlserver_cl" or "all" ?

MySql with JBoss connection refused

hello,
I am using MYSql with JBOSS, but while running starting JBOSS it
gives
Connection refused error:
MySqlDB] at java.net.PlainSocketImpl.socketCon
MySqlDB] at java.net.PlainSocketImpl.doConnect
MySqlDB] at java.net.PlainSocketImpl.connectTo
MySqlDB] at java.net.PlainSocketImpl.connect(U
MySqlDB] at java.net.Socket.<init>(Unknown Sou
MySqlDB] at java.net.Socket.<init>(Unknown Sou
MySqlDB] at org.gjt.mm.mysql.MysqlIO.<init>(My
MySqlDB] at org.gjt.mm.mysql.jdbc2.IO.<init>(I
MySqlDB] at org.gjt.mm.mysql.jdbc2.Connection.
159)
MySqlDB] at org.gjt.mm.mysql.Connection.connec
MySqlDB] at org.gjt.mm.mysql.jdbc2.Connection.
va:89)
MySqlDB] at org.gjt.mm.mysql.Driver.connect(Dr
MySqlDB] at java.sql.DriverManager.getConnecti
MySqlDB] at java.sql.DriverManager.getConnecti
MySqlDB] at org.opentools.minerva.jdbc.xa.wrap
nnection(XADataSourceImpl.java:118)
MySqlDB] at org.opentools.minerva.jdbc.xa.wrap
nnection(XADataSourceImpl.java:151)
MySqlDB] at org.opentools.minerva.jdbc.xa.XACo
(XAConnectionFactory.java:246)
MySqlDB] at org.opentools.minerva.pool.ObjectP
ol.java:819)
MySqlDB] at org.opentools.minerva.pool.ObjectP
a:569)
MySqlDB] at org.opentools.minerva.pool.ObjectP
a:521)
MySqlDB] at org.opentools.minerva.jdbc.xa.XAPo
APoolDataSource.java:165)
MySqlDB] at org.jboss.jdbc.XADataSourceLoader.
der.java:330)
MySqlDB] at org.jboss.util.ServiceMBeanSupport
ava:93)
MySqlDB] at java.lang.reflect.Method.invoke(Na
MySqlDB] at com.sun.management.jmx.MBeanServer
java:1628)
MySqlDB] at com.sun.management.jmx.MBeanServer
java:1523)
MySqlDB] at org.jboss.util.ServiceControl.star
MySqlDB] at java.lang.reflect.Method.invoke(Na
MySqlDB] at com.sun.management.jmx.MBeanServer
java:1628)
MySqlDB] at com.sun.management.jmx.MBeanServer
java:1523)
MySqlDB] at org.jboss.Main.<init>(Main.java:21
MySqlDB] at org.jboss.Main$1.run(Main.java:121
MySqlDB] at java.security.AccessController.doP
MySqlDB] at org.jboss.Main.main(Main.java:117)
I used the following tag in in JBOSS.jacml

<mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=MySqlDB">
<attribute name="DataSourceClass">org.opentools.minerva.jdbc.xa.wrapper.XADataSourceImpl</attribute>
<attribute name="PoolName">MySqlDB</attribute>
<attribute name="URL">jdbc:mysql://192.168.0.6/AccountingDb:3333</attribute>
<attribute name="Properties">DatabaseName=AccountingDb</attribute>
<attribute name="JDBCUser"></attribute>
<attribute name="Password"></attribute>
<attribute name="MinSize">0</attribute>
<attribute name="MaxSize">10</attribute>
<attribute name="GCEnabled">false</attribute>
<attribute name="GCMinIdleTime">1200000</attribute>
<attribute name="GCInterval">120000</attribute>
<attribute name="InvalidateOnError">false</attribute>
<attribute name="TimestampUsed">false</attribute>
<attribute name="Blocking">true</attribute>
<attribute name="LoggingEnabled">false</attribute>
<attribute name="IdleTimeoutEnabled">false</attribute>
<attribute name="IdleTimeout">1800000</attribute>
<attribute name="MaxIdleTimeoutPercent">1.0</attribute>
</mbean>

and JDBC tag is

<mbean code="org.jboss.jdbc.JdbcProvider" name="DefaultDomain:service=JdbcProvider">
<attribute name="Drivers">org.hsql.jdbcDriver,org.enhydra.instantdb.jdbc.idbDriver,com.pervasive.jdbc.v2.Driver,org.gjt.mm.mysql.Driver</attribute>
</mbean>
plz help me out
thanks
bhuwan

I am just use that ...But it works...!!
MySQL is Runing good ...
the problem is that you must reset the defaultDS,
to be Mysql.
So,Jboss must have only one DefaultDS,
In My Setup...
1.standardjaws.xml
<?xml version="1.0" encoding="UTF-8"?>
<jaws>
<datasource>java:/mySQL</datasource>
2.jboss.jcml (must changed as followed)

<mbean code="org.jboss.jdbc.JdbcProvider" name="DefaultDomain:service=JdbcProvider">
<attribute name="Drivers">org.gjt.mm.mysql.Driver</attribute>
</mbean>
<mbean code="org.jboss.jdbc.XADataSourceLoader" name="DefaultDomain:service=XADataSource,name=mySQL">
<attribute name="PoolName">mySQL</attribute>
<attribute name="DataSourceClass">org.opentools.minerva.jdbc.xa.wrapper.XADataSourceImpl</attribute>
<attribute name="Properties"></attribute>
<attribute name="URL">jdbc:mysql://localhost/j2ee</attribute>
<attribute name="GCMinIdleTime">1200000</attribute>
<attribute name="JDBCUser" />
<attribute name="MaxSize">10</attribute>
<attribute name="Password" />
<attribute name="GCEnabled">false</attribute>
<attribute name="InvalidateOnError">false</attribute>
<attribute name="TimestampUsed">false</attribute>
<attribute name="Blocking">true</attribute>
<attribute name="GCInterval">120000</attribute>
<attribute name="IdleTimeout">1800000</attribute>
<attribute name="IdleTimeoutEnabled">false</attribute>
<attribute name="LoggingEnabled">false</attribute>
<attribute name="MaxIdleTimeoutPercent">1.0</attribute>
<attribute name="MinSize">0</attribute>
</mbean>

Error trying to get LiveCycle ES up and running with JBoss/SQL Server

I am having an error trying to get LiveCycle ES Trial up and running with JBOSS and SQL Server. The LiveCycle ES and JBOSS engines are running on Windows Server 2003 SP #2 under VMWare Server with 2 vCPUs/1 GB vRAM. The SQL Server database is SQL 2005 x86-64 with SP #2 on a separate server. I have carefully followed all of the instructions for setting up jboss, modifying all of the appropriate XML files, downloading the SQL JDBC drivers and putting it in the %JBOSS_HOME%\server\all\lib directory, etc. I tried both the SQL JDBC 1.1 and 1.2 drivers and they both fail. The error I get is on startup of jboss using cmd /c start /low run.bat -c all (and yes I also just tried run.bat -c all) it runs along file until it gets here 2008-06-18 16:00:03,123 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=IDP_DS' to JNDI name 'java:IDP_DS' 2008-06-18 16:00:03,123 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=EDC_DS' to JNDI name 'java:EDC_DS' 2008-06-18 16:00:03,373 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA' 2008-06-18 16:00:03,373 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=adobe_JmsQueueXA' to JNDI name 'java:adobe_JmsQueueXA' 2008-06-18 16:00:03,389 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=adobe_JmsTopicXA' to JNDI name 'java:adobe_JmsTopicXA' 2008-06-18 16:00:03,482 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS' 2008-06-18 16:00:03,514 WARN [org.jboss.resource.connectionmanager.JBossManagedConnectionPool] Throwable while attempting to get a new connection: null org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Failed to register driver for: com.microsoft.jdbc.sqlserver.SQLServerDriver; - nested throwable: (java.lang.ClassNotFoundException: No ClassLoaders found for: com.microsoft.jdbc.sqlserver.SQLServerDriver)) at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnecti on(LocalManagedConnectionFactory.java:164) [ lots more error scrolls ] this repeats multiple times I can see that it does acknowledge that I put the sqljdbc.jar file in the appropriate directory from the boot.log <snip> 15:59:44,856 DEBUG [SARDeployer] deployed classes for file:/C:/jboss/server/all/lib/sqljdbc.jar <snip> please help!

APJ We ran into many issues setting up a very similar environment. In the end we had to use a specially configured JBoss, supplied by Adobe, to make a connection with the SQL database. Since you have SQL w/ SP2 on it, you will need the 1.2 driver for sure, but you may want to talk to Adobe support about obtaining the version of JBoss they supplied us with. The Adobe Support Reference Number is: 1-52422366. Even with the alternate JBoss we had to perform the following steps to get the configuration right: 1. Install Livecycle from the installation DVD. Follow the instructions for installing LiveCycle supplied by Adobe, including all pre-installation instructions. Make sure NT service is installed with parameters, and dont run Configuration Manager. 2. Rename %LIVECYCLE_INSTALL%\jboss to %LIVECYCLE_INSTALL%\jboss_orig 3. Extract the zipped new, good instance of JBoss (supplied by Adobe) to the %LIVECYCLE_INSTALL%\ folder 4. Go to the %LiveCycle_Home%\deploy folder and make a copy of the file adobeimport_SQLServer.jar file. Rename the copy of the file to aadobeimport_SQLServer.jar. There seems to be a bug in configuration manager that looks for a file with the extra a appended to the beginning of the file name, where that file normally isnt there. Make sure that the adobeimport_SQLServer.jar file is still in this folder as well. 5. Edit the data source file (%JBOSS_HOME%\server\all\deploy\ adobe-ds.xml) to point to the correct database for the LiveCycle Server. a. Update the <connection-url>, <user-name>, and <password> tags with the correct database connection information. b. If BAM is to be used on the server (this should be done on the Production server) then delete both lines that state Remove this line, if BAM is used. 6. Go to the login configuration file (%JBOSS_HOME%\server\all\conf\login-config.xml), and edit the section labeled <application-policy name = "MSSQLDbRealm">. a. Change the Principal, UserName, and Password options to point to the correct database. These will be the same as what was changed in the adobe-ds.xml file from the step above. 7. Edit the system variables on the server. Add to the Path variable %JBOSS_HOME%\bin, and add the variable JBOSS_HOME with the path to the JBoss folder on the server. (D:\Adobe\LiveCycle8\jboss for example) 8. From windows services start the JBoss for Adobe LiveCycle ES v8.0 service. Review the JBoss server log (%JBOSS_HOME%\server\all\log\server.log) to verify that JBoss starts without throwing any exception errors (A document timeout exception is the only acceptable exception for starting the service). 9. Run the LiveCycle Configuration Manager (%LiveCycle_Home%\ConfigurationManager\bin\ConfigurationManager.bat). a. Select to Not Upgrade fromLiveCycle 7.x. b. Check all boxes on the Solution Component Selection screen. c. For the Task Selection screen check all the boxes except for the Import LiveCycle ES Samples into LiveCycle ES if on the production server. d. Run through the rest of the configuration manager interface to setup the LiveCycle server with the new application server. Follow the steps supplied by Adobe for this. 10. Once configuration manager has completed, reboot the server, and verify that JBoss starts up again without any exceptions or errors (again a document timeout exception is an acceptable exception. Look at the server log to verify this (%JBOSS_HOME%\server\all\log\server.log)).

Installing LC with JBoss on a clustered Win2003 environment

I need to install LC using JBoss on a clustered (1 node + failover node) Win2003 environment, and I have several doubts:
- Do I need to configure JBoss for clustering following the instructions on "Configuring LiveCycle ES Application Server Clusters Using JBoss"? Following such leads to LiveCycle not being able to get properly configured with the Configuration Manager... a lot of errors and exceptions get triggered, and Database doesn't get properly initialized.
- Somewhere on that document, at the "Modifying LiveCycle ES configuration files" section, it instructs to add some lines to the adobe-ds.xml file, referring to the "BAM Server Metadata Database", however, I'm installing no BAM Server. It's still necessary to do it??
I can't remember exactly which errors were being thrown by the Configuration Manager and the JBoss startup command line... I'll post them here as soon as I get a chance with the cluster.

OK, so I'm inatalling again from the beginning.
I've setup the jboss folder, and modified the JBoss configuration in order to set it up as two cluster nodes. So far, when starting up the nodes, they recognize each other.
However, this message also appears later on the startup process, and appears whenever there's another node already running:
2008-03-24 18:19:12,652 ERROR [org.jboss.deployment.scanner.URLDeploymentScanner] Incomplete Deployment listing:..--- MBeans waiting for other MBeans ---.ObjectName: jboss.mq.destination:service=Queue,name=adobe_PECommandQueue. State: CONFIGURED. I Depend On:. jboss.mq:service=DestinationManager..ObjectName: jboss.mq.destination:service=Queue,name=adobe_PEDCommandQueue. State: CONFIGURED. I Depend On:. jboss.mq:service=DestinationManager..ObjectName: jboss.mq.destination:service=Queue,name=adobe_PEInteractionQueue. State: CONFIGURED. I Depend On:. jboss.mq:service=DestinationManager..ObjectName: jboss.mq.destination:service=Queue,name=adobe_JobManagerQueue. State: CONFIGURED. I Depend On:. jboss.mq:service=DestinationManager..ObjectName: jboss.mq.destination:service=Queue,name=adobe_TaskEventTopic. State: CONFIGURED. I Depend On:. jboss.mq:service=DestinationManager..--- MBEANS THAT ARE THE ROOT CAUSE OF THE PROBLEM ---.ObjectName: jboss.mq:service=DestinationManager. State: NOTYETINSTALLED. Depends On Me:. jboss.mq.destination:service=Queue,name=adobe_PECommandQueue. jboss.mq.destination:service=Queue,name=adobe_PEDCommandQueue. jboss.mq.destination:service=Queue,name=adobe_PEInteractionQueue. jboss.mq.destination:service=Queue,name=adobe_JobManagerQueue. jboss.mq.destination:service=Queue,name=adobe_TaskEventTopic..
Is this normal?? I recall that's the only error that appears until trying to bootstrap the database.
This time I'm wiping out the jboss folder (A JBoss with no clustering, it went smooth) and copying the clustered-configured JBoss folder instead. Should I skip the DB Bootstrapping when running the configuration manager?? (Can I use the already initialized database?)

Petstore compatibilty with JBoss 5.0

Does any version of Petstore is compatible with Jboss 5.0 ???
What about Petstore version 2.0 ??

How are your connection pools setup vs how were they setup in WebLogic? It looks like your JBoss configuration is using a JTA pool that only allows reads while in a transaction.
Best Regards,
Chris

How do you use Struts with Jboss Portal

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

HT204053 I have an iPhone 4S and the new Apple TV, both setup with my email as the Apple ID. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. Is a second iTumes Match subscription required for her to use our music from iCl

I have an iPhone 4S and the latest Apple TV, both setup with my email address as the Apple ID. I subscribed to iTunes Match so our music could be played from iCloud. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. When I try to turn on iMatch so she can play our music from iCloud on her new iPad it tells me that she needs a subscription to iTunes Match. Is it Apple's intent that we would need two iTunes Match subscriptions? If not, how do I accomplish what I want to get done?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

Remove his phone number from your AppleID.
http://appleid.apple.com

HT4137 iCloud setup with one Apple ID and multiple devices

iCloud setup with one Apple ID and multiple devices

What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

We have a IPad setup with my ID, now we have I phones what if I use the same IDs? Or can I create a new one and use both on the iPad?

We have a I pad setup with my Apple ID, we have just got I phones today, can I create a different ID for my my wives phone and can she then sign into the IPad?

Stuartied wrote:
How do I sign out of the I Pad for for my wife to sign in?
Mac App Store: Sign in and out
http://support.apple.com/kb/PH11499?viewlocale=en_US
 Cheers, Tom

How do I get a new icloud account for my phone when it was setup with my wifes account?

How do I get a new icloud account for my phone when it was setup with my wifes account?

Go to Settings>iCloud and sign out. Any synced data, such as calendars and contacts, will be removed.
To get a new ID: go to http://appleid.apple.com and create a new ID - you will need a different non-Apple email address from any ID you already have.
Then go back to Settings>iCloud and sign in there, enabling any data types you want to sync in the list there. You will be asked to create a new @icloud.com address when enabling Mail.

Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

OIM installation with JBoss 4.2.3GA

Hello..
I have installed OIM 9.1.0.1 with JBoss 4.2.3GA. And getting the following error when access the http://localhost:8080/xlWebApp
INFO [TomcatDeployer] deploy, ctxPath=/xlScheduler, warUrl=.../tmp/deploy/tmp21688xlScheduler-exp.war/
INFO [WEBSTARTUP] Start the Scheduler on server startup : true
INFO [WEBSTARTUP] SchedulerInitServlet/initializeScheduler method reads data from TSK/TSA tables and initialize Quartz scheduler with the task and trigger details
ERROR [STDERR] javax.naming.NamingException: Could not dereference object [Root exception is javax.naming.NameNotFoundException: jdbc not bound]
ERROR [STDERR]      at org.jnp.interfaces.NamingContext.resolveLink(NamingContext.java:1215)
ERROR [STDERR]      at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:758)
ERROR [STDERR]      at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:774)
ERROR [STDERR]      at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:627)
ERROR [STDERR]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
ERROR [STDERR]      at com.thortech.xl.util.DirectDB.getDataSource(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.util.DirectDB.getConnection(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.util.DirectDB.getConnection(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.scheduler.common.SchedulerUtil.getManagedConnection(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.initializeScheduler(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler(Unknown Source)
ERROR [STDERR]      at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init(Unknown Source)
ERROR [STDERR]      at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
ERROR [DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
java.lang.NullPointerException
     at com.thortech.xl.util.DirectDB.getConnection(Unknown Source)
     at com.thortech.xl.util.DirectDB.getConnection(Unknown Source)
     at com.thortech.xl.scheduler.common.SchedulerUtil.getManagedConnection(Unknown Source)
     at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.initializeScheduler(Unknown Source)
     at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler(Unknown Source)
     at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init(Unknown Source)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4071)
please help me resolve this issue. Thanks in advance

Hi,
The server started with some errors.
INFO [WEBSTARTUP] SchedulerInitServlet/initializeScheduler method reads data from TSK/TSA tables and initialize Quartz scheduler with the task and trigger details
ERROR [STDERR] javax.naming.NamingException: Could not dereference object [Root exception is javax.naming.NameNotFoundException: jdbc not bound
Oracle DB is running fine. But not sure on how to verity the connectivity between the OIM and the database. Some more hints would be helpful
Thanks.

Xellerate setup with JBOSS

Similar Messages

Maybe you are looking for