[XI 3.1] Installing BO3.1 Enterprise server in BO 6.5 Enterprise Win server

We have a BO 6.5 server where we installed an running BO 6.5 server (Web server) and repository server DB is in separate box (3 tier). We planed to upgrade BO 6.5 to BO XI 3.1. Please kindly let me know whether it is possible to install BO XI server in the same BO6.5 web server. It is possible to run both BO 6.5 server and BO XI 3.1 server in the same server box in parallel. Please kindly let me know the impacts if both of them run in parallel. OS versino is : OS Version: Windows-2000 Service Pack-4

Hi,
technically thats possible but really not recommended. Two BO Versions one one Host will require a high HW base. Performance will be not the best.
If its for Test and Q&A Environment than its maybe OK - but not for production.
Regards
-Seb.

Similar Messages

Installing contact center enterprise 6.0 in new server and upgrading to 7.0

Hi,
I am trying to install contact center enterprise 6.0 into a new server ( earlier both call manage 4.3 and enterprise 6.0 were in the same BOX). So now i am upgrading cucm4.3 to 7.0 and installing enterprise 6.0 onto a new server taking backup from the old server and restoring in the new server. and after that i am planning to upgrade the Enterprise version to 7.0. Is this the right way or there is any other way.

Take a look at the 7.0 Upgrade Guide for your options. You'll be looking for Tech Refresh.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/installation/guide/Upgrade_Guide.pdf
Is there any reason why you are not upgrading to UCCE 7.5 which is compatible with UCM 7.0?

Can BI 4.0 be installed on Windows enterprise instead of Windows server?

Can I install BI 4.0 FP3 on my laptop which runs Windows 7 enterprise instead of on a windows server? The prerequisite check gives only "yellow warning" fo rthe windows server version and shows as "optional". Does that mean it is OK to install on a non-server version windows?
Thanks for any input!

Not recommended. Installing the BI Platform 4.0 Server product on your laptop would likely completely tank your laptop to the point where it is unusable. The BI Platform 4.0 product is a massive install and we recommend installing it on a server because you need a very powerful system for it to run correctly. Installing on a laptop would give you a very poor impression of the product.

Ho to install the "BC4J Enterprise Manager Bean" in Application Server 10g

Hi
I'd like to monitor my BC4J Application installed on a 10g Application Server. According to the help system I can find this information on the Enterprise Manager Website of the 10g Application Server: open the OC4J (not "home" in my case), open "Administration" tab, click on link "BC4J". After entering the OC4J Admin password you should come to a page where you can monitor BC4J-Pools and so on.
If I try this on my (custom created) OC4J I get an error message that I should install the "BC4J Enterprise Manager Bean". What is this? I installed the BC4J.EAR Application, but to no avail. However: It works well on the default OC4J "home", but unfortunately my application is on a different OC4J :(
Can anyone give me a hint, how to install the "BC4J Enterprise Manager Bean"? Can anyone point me to some documentation on this?
Thanks.

BC4J Enterprise Manager Bean is the bean to manage the bc4j framework in the oc4j instance. By default, it is only pre-installed by home instance. For all other instances, you have to do it yourself.
You can use the EM to deploy this bean to the oc4j instance you want, the ear file is located in your iAS_HOME\BC4J\oem directory.

How to install AquaLogic BPM Enterprise server in UBUNTU linux

Hello everyone,
I really dont know if it is here that I need to post this, but I cannot find any documentation about how I can install AquaLogic BPM Enterprise server in a machine with UBUNTU server. Can anyone help me with that?
Thanks
Mario Mesquita

Hi,
SAP B1 will not support linux OS. Please check below guide:
http://rels.co.il/wp-content/uploads/2013/02/System-and-Hardware-Requirements-Guide-for-SAP-Business-One-8-8-and-higher.…
Thanks & Regards,
Nagarajan

How do we we install Windows 10 Enterprise/Server version of Hyper-V Hypervisor?

How do we we install Windows I Enterprise and Server version of Hyper-V Hypervisor?
This topic first appeared in the Spiceworks Community

print:currentQueues = 3
print:setStateVersion = 1
print:currentJobs = 0
print:logPaths:logPathsArray:arrayindex:0:name = "Print Service Admin log"
print:logPaths:logPathsArray:arrayindex:0:path = "/Library/Logs/PrintService/PrintService_admin.log"
print:logPaths:logPathsArray:arrayindex:1:name = "CUPS: error_log"
print:logPaths:logPathsArray:arrayindex:1:path = "/var/log/cups/error_log"
print:logPaths:logPathsArray:arrayindex:2:name = "CUPS: access_log"
print:logPaths:logPathsArray:arrayindex:2:path = "/var/log/cups/access_log"
print:logPaths:logPathsArray:arrayindex:3:name = "CUPS: page_log"
print:logPaths:logPathsArray:arrayindex:3:path = "/var/log/cups/page_log"
print:logPaths:logPathsArray:arrayindex:4:name = "AppleTalk: HPLJ4250"
print:logPaths:logPathsArray:arrayindex:4:path = "/Library/Logs/atprintd/atprintd.100_151.log"
print:logPaths:logPathsArray:arrayindex:5:name = "AppleTalk: HPJ4250CSR"
print:logPaths:logPathsArray:arrayindex:5:path = "/Library/Logs/atprintd/atprintd.100_152.log"
print:logPaths:logPathsArray:arrayindex:6:name = "AppleTalk: HPLJ2200"
print:logPaths:logPathsArray:arrayindex:6:path = "/Library/Logs/atprintd/atprintd.100_153.log"
print:state = "RUNNING"
print:readWriteSettingsVersion = 1
print:pluginVers = "10.4.140"
print:startedTime = "2007-05-24 16:55:05 -0400"
================================
All 3 queues are setup for SMB.
================================
Access has:
"Use same access for all services" checked.
"Print" does not show up on the grayed out list underneath it.
However, AFP, FTP, iChat, Login Window, Mail, SSH, VPN, Web, Weblog, Windows and Xgrid all do.
"Allow all users and groups" is chosen as well.
================================
PowerBook G4 12 867MHz Mac OS X (10.4.9) iMac G5 20 2GHz, iPOD Nano 1GB & 60GB, AppleTV 40GB

Unable to install SQL 2012 Enterprise on Windows 8.1 OS

I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
Wizard disappears from this screenshot onwards.
Tried installing from Command Prompt.
Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
Still wizard disappears.

Hello,
I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
support files as well.Refer below link to remove it completely
http://technet.microsoft.com/en-us/library/hh231731.aspx
Similar issue docemented here
If you face any issue below manual method for removing SQL server will be helpful
1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
    2. Backup the registry.
    3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer.
    7. Reboot the machine.
Revert if you face any issue.
EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to install PEAR on Linux server

Hi
I have PHP installed on one linux server and developers are using it already. I have been given the task to get the oci8 (oracle connectivity) done on this same server. I can not do the reinstall of whole PHP again. During the install of OCI extention I got many errors for missing PEAR files.
So I went through the PEAR document and found "php go-pear.php" command to install the PEAR package. This command fails with below error.
download of http://pear.php.net/get/PEAR?uncompress=yes failed: Failed to parse address "" (0)
The problem is this Linux box does not have direct internet connectivity so I had to download all the required packages as per go-pear.php on my local machine and I am FTPing them to this linux box. I have kept the "PEAR-1.8.1.tar" file in the same directory where go-pear.php file exists but still the above command tries to download it from internet.
Could you please tell me how can I overcome this problem. Please let me know if there are any RPM's that I can use to install PEAR rather that "php go-pear.php" command.
Thanks
Shelly

Hi CJ.
It has been more than 4 weeks that I am strugling to get PHP-Oracle work on my system. You are the only hope right now. I have gone through so many articles and white pages that I am totally confused and starting to hate PHP or actually Suse Linux. :-)
Below are the details of my system.
more SuSE-release
SUSE LINUX Enterprise Server 9 (i586)
VERSION = 9
PATCHLEVEL = 4
rpm -qa php* No results
rpm -qa ph* --No results
rpm -qa oracle*
oracle-instantclient-devel-10.2.0.4-1
oracle-instantclient-basic-10.2.0.4-1
* which php*
*/usr/bin/php*
* php -version*
PHP 4.3.4 (cli) (built: Jan 17 2008 09:55:23)
Copyright (c) 1997-2003 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2003 Zend Technologies
This is what I see on my system
*/usr/bin> ls -l |grep php*
-rwxr-xr-x 1 root root 100308 2008-01-17 05:03 asp2php
-rwxr-xr-x 1 root root 1392441 2008-01-17 04:55 php
-rwxr-xr-x 1 root root 684 2008-01-17 04:55 php-config
-rwxr-xr-x 1 root root 593 2008-01-17 04:55 phpextdist
-rwxr-xr-x 1 root root 2082 2008-01-17 04:55 phpize
/usr/bin> whereis php
php: /usr/bin/php /etc/php.ini /usr/lib/php /usr/include/php /usr/share/php /usr/share/man/man1/php.1.gzI see that PHP is already installed on my system which is version PHP 4.3.4.
Question.
1) Do i have to upgrade the PHP version to the latest to get OCI8 configured?
2) If the answer to the above question is Yes than could you point me to any reference doc?
3) If the upgrade is not needed, how can I configure PHP to use OCI8 to connect to database?
Thanks in advance
Shelly

Error while installing Oracle 9i Application server

Hi All,
I am trying to install oracle 9i Application Server 9.0.2.0.0 Enterprise Edition on Windows 2000.
The installation gets stuck up after 40 percent , while trying to copy a file named 'PGPUS.MSB' .
There is no update in the Install Actions Log File also.
While I tried to install oracle 9i Application Server 1.0.2.1.0 for Windows NT and Windows 2000, installation goes OK till 100 percent, after which it encounters Errors in JRE.Exe
Pls help ! Its urgent
thanks in advance
rgds..
Subhas

App Server forum is here:
Oracle Application Server - General (<=== repost question there

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Error in installing sun java directory server

dear ,
i am trying to install sun java directiry server from sun java enterprise server using command line ( ./installer ), but this error reported to me when i issue the installer command .
# ./installer
Error occurred during initialization of VM java/lang/NoClassDefFoundError: java/lang/Object
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
Thanks in Advance,
Basem

Sorry for the delay in response.
It could be a patch issue. Have you read http://docs.sun.com/app/docs/doc/820-2210/gduwe?a=view
Have you checked if the problem exists in Web Server 7.0 update 3 as well?
Can you send more details like :
isainfo -v
file /home/sjws7.0/lib/libadminsecurity.so
ldd /home/sjws7.0/lib/libadminsecurity.so

Installing Oracle 8i Enterprise Edition on NT Workstation

I got an error: "An error during runtime." when I try to install Oracle 8i Enterprise Edition (8.1.6) on a Windows NT Workstation Machine, could anyone tell me why it happens?
Thanks

You can set up the Enterprise Edition on either, and you can create databases with either.(The Oracle installation program installs the scott/tiger example databases.) What I haven't tried, and what you probably need the server version for, is an actual server running a real commercial database. If you are just a student and want to run EE to learn it, go for it. That is what I am doing.

CRystal 8.5 Pro install asking for Enterprise cd but I only have one CD

The setup screen comes up after registration and
says -
>
Crystal reports has been successfully installed.
A web server has been detected. .....
Note : if you are ugrading from Crystal reports 8. the previous web component server has been removed. if you want to continue to distribute reports via web, you MUST install Crystal Enterprise
To install Crystal Enterprise, please insert the Crystal Enterprise CD now....
There is now crystal product installed on this server.
Can i get the enterprise CD from you or do i need to change something on the server registry or...
all help will be much apprciated
John

Please re-post if this is still an issue to the Business Objects Forum

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

What is required to install in remote desktop server services - windows server 2008R2 for VMs internet access ?

Hi!
I have a lab with a hyper-v host with windows server 2012 R2 (in workgroup).
I have many vms since Windows Server 2003 including WS 2012 R2.
My colleagues an I wan't to acess lab vms from desktop (windows 7 e 8) trought the internet.
My understanding this can be accomplished with remote desktop server services. What I need minimum
to install in version Windows Server 2008 R2 sp1 (enterprise edition) 64 Bits ? Best Regards
Best regards

you need a small VM, 2-4GB RAM that's internet facing in order to host RDWeb role which runs on IIS. users connect to the web page portal and login, and can launch an RDP session to whatever VMs you have. this requires you to obtain RD CALs.
you can also go with the RDGateway route but it's somewhat more complicated, requiring certificates.
in either case, you need a server with specific port forwarding to the internet through whatever firewall/proxy you have and licensing to go along with it.
it's much easier to just setup a VPN in my opinion.

[XI 3.1] Installing BO3.1 Enterprise server in BO 6.5 Enterprise Win server

Similar Messages

Maybe you are looking for