XI content for SRM and CCM scenario - mapping

Hi All,
We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
SAP SRM SERVER 5.5
CatalogUpdateNotification_Out
CatalogTransmission
http://sap.com/xi/EBP
SAP CATALOG CONT.MGMT. 2.0_700 ,
CatalogUpdateNotification_In
CatalogTransmission
http://sap.com/xi/CCM/CAT
Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
The service pack details are as follows:
PI 7.0 SP level 14
XI content
u2022 SAP BASIS 7.00 - SP 14
u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
u2022 SAP SRM SERVER 5.5 - SP 11
u2022 SAP ABA 7.00 - SP 14
Thanks,
Shravan

ditto, anybody received a response from SAP with regards to this problem?
As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
Regards, Kyle.
OK Received a response from SAP dated Oct. 9, 2008
I assume that you have installed NW 7.00 SP14 (or higher).
Within earlier versions the mapping from XML to ABAP was to lax.
The XML message was processed witout regarding the name of the root
element. This was fixed with SP14.
When you call an interface the XML message must match with the type
defined in the WSDL used for proxy generation.
Either the message or the WSDL used to generate the proxy seems to be
wrong here.
Here is a work around should solve this problem until we make available in a standard note soon.
I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
Disable the new check by adding the following entry in transaction sproxset
-Name: ST_USE_LAX_ON
-Value: X
-User: <empty>
-Inactive: <empty>
Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM

Similar Messages

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

Using XI Content for SRM 2007

Hi,
We are configuring a scenario for SRM which has following landscape
ECC <=> SAP PI <=> SRM
I am trying to use XI Content for SRM 7.0 and I have imported SAP SRM 7.0 Software component into ESR. But there are no Process Integration Scenarios which I can use to configure objects in Integration Directory using wizards. Also there are no IDoc imported in this SC and no mappings defined. Does that mean We have to create our own mappings? But this was not true when we used SRM 5.0 content.
I am not able to find any document which talks how to configure PI scenario using SRM 7.0 XI Content. Do let me know if there is any?
There is another thing which comes to my mind if SRM 7.0 XI Content is using web services instead of IDoc for communication with ECC system. If that is the case then i cannot find predefined proxy in ECC system and thus i have to create custom web service server proxy (where again i have to write custom code).
Do let me know if anybody has used XI Content SRM 2007. So that I can get some help on this.
Thanks,
Divyakumar

Hi Divya,
We have done with SRM 5.0 but not with SRM 7.0
When i see content for SRM 7.0 in Market Place i donot find , From where did u get download those XI content for SRM 7.0 ???
Did u find any Integration Scenarios depecting the flow , we used the same for the business flow.
Please do update how u have proceeded.
Thanks
rgds
srini

BI content for SRM

Hello,
I would like to understand　Concept　of　BI content for SRM.
For some reason we cannot use BI.
【structure of the system】
BI7.0
SRM5.0(Decoupled Scenario)
ECC6.0
■transaction data(Decoupled Scenario)
How does BI eliminate crossover of documents and gather documents?
by　document number?product category?
■master data(Decoupled Scenario)
WHen we use master data for analysis, should I use master date of SRM?
In that case, should we copy the master data of ECC to SRM?
【Decoupled Scenario】
Master date and transaction date (by unit of record) exist in
1. ECC
2. SRM
3. ECC and SRM

NO migration of data from old to new model data.
I implemented the new model and reload the data into BW.

Where to download the standard content for SRM to import to PI 7.4

Hi experts:
i am implementing the MM-SUS by PI. My SRM is 7.03 and PI is 7.04.
i have not implement this before. When i configure the PI Integration repository ,it need to import the Standrad Content for SRM.
My question is where i can find the standard content to download, can anyone help me with more detail? thanks a lot!

user8683895 wrote:
Where to download the latest driver for X4447A-z?
Sun 4-port network card Interface:PCI-E x 8Are you restricting your search to "X4447A-z" ?
What happens when you search MOS for "X4447A"
or for "Sun 4-port network card Interface: PCI-Ex8" ?

What are the standared Bi contents for Aerospace and Defense.

Hi All,
Please let me know where can I find the standared Bi contents for Aerospace and Defense ( IS- A&D) in Bi system.If you have any specific material. Pla help me in this regard.
Thanks
kvr

Hi,
Please go to the ffollowing link.
http://help.sap.com/saphelp_dimp50/helpdata/en/19/71fe40f652f323e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/85/c0c0911f6f4556b0473e36d9b62bda/frameset.htm
All Articles on the Aerospace&Defense Industry
Regards,
Ravi.

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

Business Content for SRM 5.0 in SP9

Hi All,
We have BI_CONT release 702 with Level 0005. But when I try to install the transformations or any new objects like DTP, I'm not able to find many of those in Business Contents. Are these objects not yet delivered with the standard content? Do anyone have any official information on this or any OSS Note? Any planned release dates?
Also any information on existing contnts for SRM 5.0
Thanks in advance
Amit

Hi,
But i know from the documentation of SRM 5.0 --> master Guide ---> It has been mentioned as follows
1) THE SRM 5.0 CONFIGURATION DOCUMENTATION IS DELIVERED WITH THE ST-ICO 150 CONTENT SHIPMENT FOR SOLUTION MANAGER
2) SOLUTION MANAGER CONTENT REPLACES THE BUSINESS SCENARIO CONFIGURATION GUIDES , WHICH WERE DELIVERED WITH EARLIER SRM SHIPMENTS
3) THE USE OF SOLUTION MANAGER IS MANDATORY FOR MYSAP SRM 5.0
4) if you have a look at the Master guide for SRM 5.0 ---> there is one seperate section available --->
1.2 Solution Manager ---> which gives more details of the solution manager and its content.
Edited by: khan voyalpad usman on Feb 12, 2008 7:49 PM

SOLAR01 - BPR content for Oil and Gas - JVA processes

Hello
We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR. In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil and Gas Soluton Map. We are not able to find any of those processes in the BPR. We look any process with joint or venture words in it but there is none. We have Solman 7.01, stack 25 and ST-ICO 150 level 27 (the latest available)
Any suggestions?
Regards
Esteban Hartzstein

Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh

Service hierarchy for SRM-MDM catalogi scenario

Hello,
We tried setting up the 'new' SRM-MDM service hierarchy catalogi. I've looked over some sdn threads already and read the SAP help http://help.sap.com/saphelp_srm70/helpdata/en/6b/7fb967f6cd4df0a5a9d5dec7e4aa72/frameset.htm. Both told me the service hierarchy should work in the SRM 'bidding/RFx' scenario. Since service hierarchy should work for RFx we continued trying setting it up but ran into the following problem:
Up on opening our service hierarchy catalogi it returns the following message 'Table is empty' and does not show us any items(mss hierarchy is enabled in the SRM-MDM UI configuration for this catalogi). If we change thé UI setting to 'products' the items do show-up in a 'flat' manner (without hierarchy).
- We've set up grouping in the SRM-MDM catalogi for these items
- We've set up an entry in the MSS hierarchy lookup table and assigned this entry some of the catalogi items
- We've not setup any MSS Hierarchy price
- We've setup the item types, the outline item is of type 'MSS header' the subtypes are of type 'Free Text' and the MSS hierarchy entry is of type 'MSS header' aswell.
- we've setup the hierarchy manually with testdata via the important manager (no pi/ix).
Could anybody confirm service hierarchy works in the RFx scenario (mss hierarchy enabled)? Is there something we've missed or are forgetting? Any other pointters are greatly appreciated.
Kind regards,
Tim

Hello Masa,
We have not loaded our service hierarchy catalogi items from ECC nor SRM. We've manually set-up test-date via the import manager and data manager tools. This, as long as you set it up correctly, should still work in my oppinion?
For the UI configuration the service (mss) is enabled causing the 'empty table' line to show up. If we would change it to 'product' the items would show but in a flat manner.
Do you have any other pointers . F.e. what the item types should be (subitems: free-text and header: mss-header) and what the role of the mss-hierachy and mss-pricing table are and what we should do with those? We've configured grouping (main item, component item, substitute item ..) to enable hierarchy is this correct?
Ps. What does 'MSS' stand for, what does it mean?
Kind regards,
Tim

Customizing for extended and classic scenarios

Hi,
I know what is the difference between classic and extended classic scenarios.
But i want to know what is the difference in the customizing.
I understand that there is a badi that decides on the product categories and also there is a customizing for assigning product categories to back end systems.
I want to know what is the significance of this customizing?
Regards
abaper sap

Hi Abaper
in spro
activate extended classic scenario determines the technical scenario as ECS.
and your PO created in SRM system so it is a leading system in SRM.
your PO messages are created in SRM and sent it suppliers from here not from ECC.
all PO transaction type must be defined in SRM system.
you can go EBP_SUS scenario if customer interested.
like many..
Here in ECS , you can use local contracts....
br
muthu

Best Practices in use of ABAP for SRM and/or CRM Configuration

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Compliance Calibrator for SRM and SCM???

Hello,
Can we use the compliance calibrator for the modules like SRM and SCM? Do we get any ruleset for these modules from SAP or need to create ourself?
Thanks in advance
Eric

Alexander,
Thanks for your prompt response. But the note available from SAP is not included SCM?
<b>Note 1033326 - Compliance Calibrator 5.2 Rule Upload</b>
SOD Action and Permission level rules are provided for R/3, APO, ECCS, CRM
and SRM. HR and Basis rules are included in the R/3 but also broken out
separately.
Could you tell me what all other modules are included in the standard ruleset?
Thanks in advance
Eric

How to publish comics content for Iphone and ipod touch on itunes store ?

hi,
i am trying to figure out, how to publish content for the APPLE store ?
my situation:
i draw a comic book and i would like to sell it on itunes store under the:
home\app store\numericbook category
there are a lot of books sold here, and i would like to do the same, but my big problem is : i am a noob in programming and stuf so i beg you to help me !
thx
paradoks

In order to develop & create apps for the iPod touch/iPhone, you need to be a registered developer, download the iPhone SDK (Mac OS only) here -> http://developer.apple.com/iphone/program/download.html then create the app and submit it to Apple.

Change the standard XI content for SRM SUS scenario

Hello everyone,
I am implementing the "Plan driven procurement with supplier integration" scenario which integrates the SAP R/3 and SRM-SUS.
I have imported the standard XI content available on service market place for the scenario.
Now i have to modify the scenario. I have to add some additional fields in the inbound message for purchase order request.
The proxy classes for these interfaces were already created in the SRM system.
So now after changing the message type what all things i shd take care of e.g like creating the proxy newly etc.
Thanks and Regards
Rahul Nawale

Hi Shabarish,
Thanks for your reply, but i have a couple of more questions.
1.I can find a function module called from the method present in the proxy class generated.
METHOD ii_bbpx1_preq_request_in~execute_asynchronous.
CALL FUNCTION 'BBP_SAPXML1_EXTREQU_UPDATE_IN'
EXPORTING
is_purchreq_request = input.
ENDMETHOD.
so since i am changing the purchase order request do i have to do any changes in the function module as well.
In the function module Proxy Structures are mapped to the API Structures and then the API is called using BBP_API_EXTREQU_UPDATE function module.
Thanks and Regards
Rahul Nawale

XI content for SRM and CCM scenario - mapping

Similar Messages

Maybe you are looking for