XI R3.1 publication success / fail notifications not sent

I have a set of 3 publications created and working fine in R3.1 (EDGE), each of which distributes a report to a UNC fileshare location. Upon success or failure, each is configured to send an email notification to an admin.
The publications work and distribute the reports fine, but 1 of the 3 email notifications will sporadically fail (not an explicit failure, but the notification email is not sent), and I do not see any errors captured for the recurrence itself nor in the publication log - everything indicates success. To add to this, it is seemingly random which one of the 3 notifications is not be sent - I don't see any pattern.
All 3 publications finish at nearly the same time, so I'm wondering if there is some sort of SMTP block going on that cannot be captured within the BOBJ layer? We only have a single job server that these destinations are processed through, and the SMTP destination is enabled and configured fine.
Has anybody come across anything like this? Any thoughts on what the root cause may be?
Thanks.....

Hi
can you check the logs of your SMTP server to see if the BOBJ server tried indeed to send 3 mails?
Regards,
Stratos

Similar Messages

Notification not sent when deadline passes

Hi all!
I have defined deadline monitoring Latest End and Requested End for several steps in Workflow.
The time is static (X days from Work Item Creation).
The action is Modelled. When deadline passes, notification must be sent to receipient.
The problem: notification is not sent and workflow is in ERROR status in PRODUCTION environment.
In QA environment everything is OK and notification is always send.
The deadline definitions in SWU3 are similar in QA and PROD.
Can somebody help me?
Thanks in advance,
Nina Korotayev.

Hello Nina,
It wasn't my recommendation to make it SYST-UNAME, but it should work.
So you say that in the binding you have:
&NUMBER.RF_PARTNER_MANAGER& -> &ADDRESSSTRINGS&
and yet the values are:
RF_PARTNER_MANAGER = USMORISSU
AddressString=US
I assume you mean AddressStrings (with an s at the end).
It's strange that a simple binding doesn't work.
Is RF_PARTNER_MANAGER a virtual attribute? Does the underlying database field perhaps receive its value just before this step? That could explain it, the workflow isnj't up to date with the database.
Remind me, have you been able to reproduce this problem in the test system?
regards
Rick Bakker
Hanabi Technology

Notification successful but email not sent untill PM shuts down

Hello,
I was trying to email from a BPEL process and edited the ns_emails.xml file; corrected the SMTP host and port. The BPEL processes (with the email notification) succeed but the emails are not delivered until the BPEL PM shuts down.
My network administrator told me that he could see a session connecting to the SMTP host but that there is no disconnect. Shutting down the PM does disconnect resulting in delivery of the message.
Not a desirable situation...
Does anyone have a suggestion to solve this or does anyone have a similar problem?
We are using Lotus Domino 5 as a mail server; perhaps that is a problem?

Hi,
I'm having the same problem and my firewall is turned off, so I'm wondering what's the issue.
Can anyone suggest what's going wrong?
Thanks,
Aashish

App Ready Notification not sent to External Accessory in iOS7.1

We have an iPad application which communicates with External Accessory connected to ipad via USB/Bluetooth. While communicating to external accessory, application sends app ready notification to external accessory after initial handshake. But after debugging and carefull observation we have found that the app ready notification do not go to external accessory hardware from iPad. This issue is only observed in iOS 7.1 and 7.1.1 onwards. On previous iOS version it is working fine. What might be cause and resolution of this issue.
Thank you for the help and input.

Is the SMTP server that is setup in the Mailer Configuration connected to the Internet? Please use this same SMTP server in your e-mail client such as Outlook or Netscape Messenger and send an e-mail to Yahoo!. If you receive the e-mail in your Y! account, the SMTP server is good to send e-mails internal as well as external.
So, please check your SMTP server configuration to make sure it is able to communicate outside the firewall. No changes required in Workflow Manager.
Hope this helps.
Vijay

Report scheduled for delivery runs perfectly, but sends failed notification

Our BI Publisher 10.1.3.4 has spontaneously started refusing to deliver reports. The same reports that have always been delivered via email are now sending failed notifications instead.
I have put the server in debug mode and watched the process from beginning to end, and there is no indication of any problem. The relevant log section is below. You can see that it gives absolutelly no indication of why it is sending the failed notification.
Furthermore, the report output is generated successfully, and I can open the PDF from the job history and it looks good.
[010912_021559677][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Finished processing the document.
[010912_021559677][][STATEMENT] [ID:48848] Time elapsed for report processing : 15259, time from begining : 15311
[010912_021559677][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Document content type : application/pdf
[010912_021559678][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Delivery 0 : Start processing email delivery
[010912_021559679][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :smtp_email
[010912_021559699][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[010912_021559730][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[attachment.pdf], [content-type]=[application/pdf], [index]=[-1], [disposition]=[inline]
[010912_021559734][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021559734][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021559736][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Called
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): default server properties are loaded for this request type (smtp_email) : {HOST:String=smtp.mtus.mtnet, server-name=smtp.mtus.mtnet}
[010912_021559736][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[TEMP_DIR:String] [u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[HOST:String] [smtp.mtus.mtnet]
[SMTP_TO_RECIPIENTS:String] [[email protected]]
[SMTP_ENCODING:String]
[SMTP_CONTENT_FILENAME:String] [message.txt]
[SMTP_CONTENT_TYPE:String] [text/plain;charset=UTF-8]
[SMTP_SUBJECT:String] [terr_cust_perf-1T-DEBUG-1]
[BUFFERING_MODE:Boolean] [true]
[SMTP_BCC_RECIPIENTS:String] [ ]
[SMTP_FROM:String] [[email protected]]
[TEMP_FILE_PREFIX:String] [dlvr]
[RETRY:Integer] [0]
[SMTP_ATTACHMENT:Attachment] [(oracle.apps.xdo.delivery.smtp.Attachment]
[SMTP_CURRENT_DIRECTORY:String] [u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/]
[RETRY_INTERVAL:Integer] [60000]
[TEMP_FILE_SUFFIX:String] [.tmp]
[SMTP_ATTACHMENT_FIRST:Boolean] [(java.lang.Boolean]
[server-name] [smtp.mtus.mtnet]
[SMTP_REPLY_TO:String] [[email protected]]
[SMTP_CHARSET:String] [UTF-8]
[ASYNC_TIMEOUT:Integer] [86400000]
[SMTP_DIRECTORY_MAPPINGS:Hashtable] [(java.util.Hashtable]
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is ON.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): TEMP_DIR found, start document buffering : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Starting document buffering.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Creating temporary file for buffering : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/dlvrswaKldQcDE8872.tmp
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): 7 bytes have been written to the temporary file.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] filterDocument(): Starting document preprocessing.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] filterDocument(): No native command found for preprocessing, exiting.
[010912_021559737][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] backupDocument(): Finished document buffering.
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Start reading the buffered document file. : /u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/dlvrswaKldQcDE8872.tmp
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): called
[010912_021559738][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): This request has never been submitted before.
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[message.txt], [content-type]=[text/plain;charset=UTF-8], [index]=[0], [disposition]=[inline]
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021559740][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021559757][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character set for MIME headers : UTF-8
[010912_021559757][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character encoding for MIME headers : B
[010912_021600017][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021600050][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600051][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600051][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600054][][STATEMENT] ToplinkDataHandler.getOutput() : called
[010912_021600054][][STATEMENT] ToplinkDataHandler.getOutput() : obtaining client session.
[010912_021600054][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600054][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600054][][STATEMENT] ToplinkDataHandler.queryOutput() : calling executeQuery().
[010912_021600492][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021600521][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600522][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600522][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021600525][][STATEMENT] ToplinkDataHandler.getOutput() : called
[010912_021600525][][STATEMENT] ToplinkDataHandler.getOutput() : obtaining client session.
[010912_021600525][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600525][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021600525][][STATEMENT] ToplinkDataHandler.queryOutput() : calling executeQuery().
[010912_021600998][][STATEMENT] ToplinkDataHandler.queryOutput() : finished calling executeQuery().
[010912_021601016][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021601017][][STATEMENT] Read connection pool max:20, min:5, total:5, available:5
[010912_021601017][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021614773][][STATEMENT] [ID:48848] Time elapsed for delivery : 15096, time from beggining : 30407
[010912_021614773][][STATEMENT] [ID:48848] Time elapsed for report archiving : 0, time from beggining : 30407
[010912_021614774][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Updating the output info in the database.
[010912_021614774][][STATEMENT] Write connection pool max:10, min:5, total:5, available:5
[010912_021614833][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[010912_021614833][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Done updating the output info in the database.
[010912_021614833][][STATEMENT] [ID:48848] Time elapsed for updating history in db : 60, time from beggining : 30467
[010912_021614833][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Sending failed notification to : [email protected]
[010912_021614834][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :smtp_email
[010912_021614834][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[010912_021614834][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Called
[010912_021614834][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): default server properties are loaded for this request type (smtp_email) : {HOST:String=smtp.mtus.mtnet, server-name=smtp.mtus.mtnet}
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[SMTP_FROM:String] [[email protected]]
[SMTP_CHARSET:String] [UTF-8]
[server-name] [smtp.mtus.mtnet]
[SMTP_CONTENT_TYPE:String] [text/plain;charset=UTF-8]
[ASYNC_TIMEOUT:Integer] [86400000]
[SMTP_ENCODING:String] [B]
[HOST:String] [smtp.mtus.mtnet]
[SMTP_CONTENT_FILENAME:String] [message.txt]
[RETRY:Integer] [0]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[SMTP_TO_RECIPIENTS:String] [[email protected]]
[TEMP_FILE_SUFFIX:String] [.tmp]
[SMTP_ATTACHMENT_FIRST:Boolean] [(java.lang.Boolean]
[SMTP_SUBJECT:String] [Delivery Failure]
[TEMP_FILE_PREFIX:String] [dlvr]
[RETRY_INTERVAL:Integer] [60000]
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is OFF.
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Start reading given document InputStream.
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[010912_021614835][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): called
[010912_021614836][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): This request has never been submitted before.
[010912_021614836][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Adding an attachment ...[filename]=[message.txt], [content-type]=[text/plain;charset=UTF-8], [index]=[0], [disposition]=[inline]
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character set for MIME headers : UTF-8
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Character encoding for MIME headers : B
[010912_021614837][oracle.apps.xdo.delivery.smtp.Attachment][STATEMENT] addAttachment(): Exiting addAttachment()
[010912_021614843][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character set for MIME headers : UTF-8
[010912_021614843][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): Character encoding for MIME headers : B
[010912_021615508][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler][STATEMENT] submitRequest(): exiting
[010912_021615509][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Finished calling DeliveryRequestHandler.submitRequest()
[010912_021615509][oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequest][STATEMENT] submit(): Process done successfully. Exiting submit()
[010912_021615509][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Done sending failed notification to : [email protected]
[010912_021615509][][STATEMENT] [ID:48848] Time elapsed for notification : 676, time from beggining : 31143
[010912_021615509][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:48848] Scheduler finished the job. Exiting...

Hi Joseph,
1. I would clean my temporary directory. If not set then it will be ORA_HOME/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp
In your case it is:
/u01/oracle/product/10.2.0/BIPHome1/oc4j_bi/j2ee/home/applications/BI Publisher 10.1.3.4.0/xmlpserver/xdo/tmp/
And test again. Ensure it has enough space.
2. If it does not work then I would read Oracle Support Note 797057.1 and see if there is a new patch for your installation.
The latest is from Nov 2011. Apply it and test it.
If none of the above work then I would open a ticket with oracle support.
From the BIP code I can only notice the issue happens during the delivery of the attachment through email delivery channel.
It is strange you can not deliver a document using email delivery channel but still can send notification using the same email server!.
good luck
regards
Jorge

The project publication has failed

I am getting the following error:
error: the project publication has failed.Reason:'_ConfirmReceipts' is not a member of 'Feugo_AutoGen_Screenflows_'..
I am using OBPM studio10g R3 and OS is windows 7 Enterprise.
I am trying to complete the tutorial for expense report management.
I have completed all the steps successfully and when i try to run the process using the start engine button, I am getting this error.
Please help me
Edited by: user13364377 on Aug 20, 2010 3:52 AM

There are a few issues with the tutorial that I wish Oracle put out an errata on.
Judging from your error, it sounds like you collided with one or more of these issues, because most of the problems deal with the variable mapping and screenflow sections.
Re: Problem with Expense Management tutorial - If you do not see "reportSf" in your dropdown, this might get you going. This discusses problems found on pages 12, 32 and 38.
Re: Screeflow argument problems - Expense Management Tutorial - This might help you through another problem with the way the tutorial describes mapping.
Re: ALBPM 6.0 process instance is not showing in workspce - Helps with a problem found on page 17.
Re: Urgent with step by step example - Helps with problems found on pages 36 and 37.
Re: Cancel button on a screenflow - Provides a screenflow best practice recommendation very different from the technique used in the tutorial.
Feel free to ping the forum if you run into something you don't understand.
Problems Tab
You engine's probably not starting correctly check the Problems tab for errors in your project.
Log Viewer Tab
There's a bug in Oracle BPM 10g Studio (actually an incorrect default property setting) that causes hundreds of messages to be pumped into the Studio log files unnecessarily. The default for Studio's Engine logging is "Debug" instead of the more appropriate "Warning". This makes reading the log files almost impossible until it is manually changed by the developers (you and me) using Studio. This needs to done before starting the Engine for every project.
Here's how to make your log file only store the meaningful information:
a) In Studio, stop the Engine
b) right mouse click your project in the Project Navigator tab
c) click "Engine Preferences"
d) click "Runtime" on the left side
e) in the "Messages logged from Server" change it from "Debug" to "Warning"
f) in the "Messages logged from BP Methods" change it from "Info" to "Debug"
g) click "OK"
h) restart your Engine - as you are restarting the Engine, be sure to check the "Delete Log Files" checkbox. This will remove the confusing and useless Engine debug log messages that make reading the log files a pain
i) duplicate the problem you were having in the Workspace
j) click the "Log Viewer" tab again
k) note that there are two icons on the left side of the Log Viewer tab. Click the "Refresh" icon (the one below the one that looks like a clock)
You should now see very few log messages and those displayed are germaine to the problem you are having.
Here are a few tips that also might help you view information in the log file:
1. Inside of your logic, create "logMessage" statements using this syntax:
logMessage "The value of the order amount is: "
+ orderAmount using severity = DEBUGThis will cause the current value of the orderAmount variable to be displayed in the log file. After running a work item instance in the process, click the "Log Viewer" tab to see the log file's contents.
2. Before clicking on the "Log Viewer" tab, be sure that you have the process diagram selected in the panel above it.
3. Inside the "Log Viewer" tab there is a refresh button inside the tab (the icon below the one that looks like a clock). Be sure to click this button to refresh the view of the log file entries.
4. If you do not want to view your log file from the Log Viewer tab inside Studio, your log file is stored where your project is stored. Not to be confused with the end user "Workspace", Eclipse (the IDE Studio uses) stores it's project is a folder also called the workspace. This is determined by the dialog box with the name of the file folder you select when Studio first initializes. You'll be able to find the log files for your project in this directory:
C:\<your Workspace folder>\<your project's name>\system
Dan

CO54: Message is not sent to any destination: Commit Work is getting failed

Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010                                         Dynamic List Display                                                1
Type
Message text
LTxt
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
       IF (LEIN-LGTYP = LK01-NLTYP AND
             LEIN-LGPLA = LK01-NLPLA) OR
              NOT P_LEDUM IS INITIAL.
       ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
         FLG_NO_LE_UPDATE = CON_X.
        MESSAGE A558 WITH P_LENUM.
       ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PM

Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Voicemail notifications not working for iphone 4s

voicemail notifications not working for iphone 4s

I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have) but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

Notifications are not sent to some users, even after the status is green.

Hello
There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
The users who has mail id say for example [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
[email protected]
And the * (star) is maintained in the address area of the Node Dummy.
Can you please give me some clue which can help me in resolving this issue.
Thanks for your time.
Chetan....

Hello Balaji,
Thanks for your inputs.
As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
Thanks for your inputs.

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

How to clear/send the failed notifications?

Hi
When i query and checked the wf_notifications table, is shows around 300 notifications that are with failed status. How to fix and send these notifications to the users?
The query that i have used is as follows:
select notification_id, status, mail_status, begin_date,message_type
from WF_NOTIFICATIONS
where status = 'OPEN' and mail_status = 'FAILED' order by begin_date desc;
Regards
Arizuddin
Edited by: arizuddin on Sep 11, 2012 1:02 PM

Hi ariz;
Did you check workflow log file? Please review:
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
Notifications Not Being Sent In Workflow [ID 1012344.7]
Workflow Mailers Not Sending Notifications [ID 560472.1]
Regard
Helios

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Publication has failed

In BPM studio 10g, a process has 4 interactive activities. After activity A, there is a conditional gateway. In each brunch, there is an interactive activity. Then, it is the final interactive activity.
I set the runtime property of all activities to user select transition. However, it shows error as follow:
The project publication has failed. Reason: This activity has the user select transition property enabled and has outgoing transitions with measurement marks or outgoing tranitions that target a conditional activity.
Then, I unselect the select transition of activity 1. It works.
However, the participant of the activity 1 cannot select the participant before send the activity.
How to let the participant of the fist activity can select the participant before sending?
Thanks

Hi Ye,
Others will disagree (and rightly so), but I don't use Conditional activities (commonly referred to as "Decision Diamonds) very often. Typically I'll just have the transitions that would have come out of the Conditional activity instead come directly out of the preceding activity. While business analysts who use Conditional activities are modeling processes correctly and in accordance with what industry pundits like Bruce Silvers would prefer seeing, my personal feeling is that their use just adds clutter to a process. There's an elegance to a well designed business process. I always strive to keep them as simple and as understandable as possible to both the business and IT.
I'll use Conditional activities in two cases:
1) When the business is more familiar with Condtional activities and have used them extensively when modeling processes in the past using process modeling tools (e.g. Visio). If they're used to seeing Conditional activities, not using Conditional activities would be a distraction that some business analysts or business people would find annoying.
or
2) When I have a process design pattern where there are nested Conditional activities. For example:
<pre class="jive-pre"><p />
"Activity A" -> Conditional -> "Activity B"
V
"Activitiy C" -> Conditional -> "Activity D"
V
"Activity E"</pre>
Here, the work item instance flows from A to either B or C. If it goes to C then it either flows to D or E. While having Conditional activities for this use case is not essential (again - you could have the transitions come out of A and C directly), it makes the process easier to understand for business analysts and the business. I think not having the Conditional activities here makes the process look a bit like an electronics wiring diagram.
Hope this helps,
Dan

Loading jperflib failed. jperflib (Not found in java.library.path)

Please:
We are working with SAP Netweaver EHP1 7.0, Red Hat Enterprise Linux 5, Oracle 10g,
SAP Application Server JAVA/Oracle, Central System
Java versión installed IBMJava2-amd64-142
java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20100916a (JIT enabled)
J9VM - 20100914_64612_LHdSMr
JIT - 20090210_1447ifx2_r8
GC   - 200902_24)
step 23 de 37: Configure UME:
Message error:
INFO 2010-11-19 20:04:41.532
Output of /opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/
CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.s
ap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/tools/iaik_jce.ja
r:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/global/security/l
ib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/BJD/
SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/ins
tall/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/oracle/client/10x_
64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/BatchConfig.xml i
s written to the logfile batchconfig.log.
WARNING 2010-11-19 20:04:43.908
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW
701/AS-JAVA/ORA/CENTRAL/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.Offlin
eToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/BJD/SYS/global/security/lib/t
ools/iaik_jce.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BJD/SYS/g
lobal/security/lib/tools/iaik_smime.jar:/usr/sap/BJD/SYS/global/security/lib/tools/iaik_ssl.j
ar:/usr/sap/BJD/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW701/AS-JAVA
/ORA/CENTRAL/install/lib:/tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/install/sharedlib:/or
acle/client/10x_64/instantclient/ojdbc14.jar /tmp/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/B
atchConfig.xml" finished with return code 183. Output:
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h).
hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
WARNING[E] 2010-11-19 20:04:43.909
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of log file batchconfig.
log: '
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.pat
h)
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration. '.
ERROR 2010-11-19 20:04:44.7
FCO-00011 The step runBatchconfig with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_S
ystem|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i
nd|ind|ind|ind|5|0|runBatchconfig was executed with status ERROR
Thanks for your comments nad suggestion

good afternoon:
the error loading jperflib failed. jperflib (Not found in java.library.path) is fixed,
Solution: LD_LIBRARY_PATH=/sapmnt/SID/exe
but other error appear
/usr/sap/BJD/JC01/j2ee/admin/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/admin/cfg/adminCFG.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/dplOptions.options doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/configtool/config.properties doesn't exist and will be created by batchconfig.
/usr/sap/BJD/JC01/j2ee/deploying/rdb.properties doesn't exist and will be created by batchconfig.
.hotspot_compiler is missing in cluster_data.
ChangeServicePropsTask has finished successfully. Service: ssl on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager: ClusterManager on dispatcher
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.NameNotFoundException: A property with the name "java.parameters" cannot be found in the PropertySheet "cluster_data/server/cfg/element-info.ID139743".
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.<init>(PropertyEntryImpl.java:85)
        at com.sap.engine.core.configuration.impl.addons.PropertyEntryImpl.readPropertyEntry(PropertyEntryImpl.java:54)
        at com.sap.engine.core.configuration.impl.addons.PropertySheetImpl.getPropertyEntry(PropertySheetImpl.java:127)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.setElementInfoProperties(ElementInfoTask.java:243)
        at com.sap.engine.configtool.batch.task.ElementInfoTask.go(ElementInfoTask.java:184)
        at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:60)
        at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:98)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)

ACS v. 5.1.0.44."Runtime" Execution failed or not monitored after patching

Hello,
I've installed on my ACS appliance the following patches:
5-1-0-44-1
5-1-0-44-2
5-1-0-44-3
5-1-0-44-4
The installation of the fourth one was interrupted - I don't know why - and since then, the Process 'runtime' shows the status Execution failed or Not monitored.
The system logs are:
Aug 13 15:16:12 ACS03 sshd[14948]: Accepted keyboard-interactive/pam for admin from 10.250.131.250 port 53196 ssh2
Aug 13 15:16:12 ACS03 sshd(pam_unix)[14951]: session opened for user admin by (uid=0)
Aug 13 15:16:12 ACS03 debugd[2774]: hangup signal caught, configuration read
Aug 13 15:16:12 ACS03 debugd[2774]: successfully loaded debug config
Aug 13 15:16:12 ACS03 debugd[2774]: [14956]: utils: cars_shellcfg.c[118] [admin]: Invoked carsGetConsoleConfig
Aug 13 15:16:12 ACS03 debugd[2774]: [14956]: utils: cars_shellcfg.c[135] [admin]: No Config file, returning defaults
Aug 13 15:16:22 ACS03 admin: info:[ACS start-stop-process] CLI is called: 'acs stop runtime'
Aug 13 15:16:22 ACS03 admin: info:[ACS start-stop-process] Stopping runtime
Aug 13 15:16:22 ACS03 monit[4589]: monit daemon at 4589 awakened
Aug 13 15:16:22 ACS03 monit[4589]: Awakened by User defined signal 1
Aug 13 15:16:49 ACS03 admin: info:[ACS start-stop-process] CLI is called: 'acs start runtime'
Aug 13 15:16:49 ACS03 admin: info:[ACS start-stop-process] Starting runtime
Aug 13 15:16:49 ACS03 monit[4589]: monit daemon at 4589 awakened
Aug 13 15:16:49 ACS03 monit[4589]: Awakened by User defined signal 1
Aug 13 15:16:49 ACS03 monit[4589]: 'runtime' start: /opt/CSCOacs/bin/exec_wrapper.sh
Aug 13 15:16:49 ACS03 ACS runtime INFO: executing /opt/CSCOacs/runtime/bin/run.sh start
Aug 13 15:16:49 ACS03 ACS runtime INFO: Checking core files. Total size 90 M
Aug 13 15:16:49 ACS03 ACS runtime INFO: Core cleanup complete.
Aug 13 15:16:49 ACS03 ACS runtime INFO: iAnywhere Solutions, Inc. One Sybase Drive, Dublin, CA 94568, USA
Aug 13 15:16:49 ACS03 ACS runtime INFO: Copyright (c) 2001-2007, iAnywhere Solutions, Inc. Portions copyright (c)
Aug 13 15:16:49 ACS03 ACS runtime INFO: 1988-2007, Sybase, Inc. All rights preserved. All unpublished rights reserved.
Aug 13 15:16:49 ACS03 ACS runtime INFO:
Aug 13 15:16:49 ACS03 ACS runtime INFO: LD_LIBRARY_PATH is set to: /opt/CSCOacs/runtime/lib:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/db/dbsrv/jre150/lib/i386/client:/opt/CSCOacs/db/d
bsrv/jre150/lib/i386:/opt/CSCOacs/db/dbsrv/jre150/lib/i386/native_threads:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:/opt/C
SCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:
Aug 13 15:16:49 ACS03 ACS runtime INFO: starting rt_daemon in /opt/CSCOacs/runtime/bin
Aug 13 15:16:49 ACS03 ACS runtime ERROR: /opt/CSCOacs/runtime/bin/run.sh: line 96: ./rt_daemon: Permission denied
Aug 13 15:16:49 ACS03 ACS runtime INFO: Waiting for rt_daemon to come up..
Aug 13 15:16:49 ACS03 ACS runtime INFO: Number of rt_daemon processes running is 0
Aug 13 15:17:07 ACS03 last message repeated 9 times
Aug 13 15:17:09 ACS03 ACS runtime INFO: .
Aug 13 15:17:09 ACS03 ACS runtime INFO: rt_daemon failed to start
Aug 13 15:17:09 ACS03 MSGCAT58007: rt_daemon failed to start
I already tried to remove the patches, install next patches, rename patch n°4.
Nothing changes.
Could you please tell if there is a solution before I re-install everything with the DVD?
Thanks,
Best regards,
Patrick

Hi,
I had no error message except for patch 4 for which I get a message:
Patch '5-1-0-44-4' is already installed.
% Error: Failure to open / validate the patch
That's why I did change the name to patch_5-1-0-44-4.tar.gpg.
The install went well, but the problem is still there
Rgds,
Patrick

XI R3.1 publication success / fail notifications not sent

Similar Messages

Maybe you are looking for