XI--Table for communication channels

Hello Gurus,
In which Table does Communication Channels stored?
Can anyone explain the Few tables Related to XI.
Thanks and Regards,
Ravi.

Hi
SMPREL3 abap table contains comm channel info
SMPPREL3: this table contains information about interfaces; here you can find information on sender (party, service, interface and namespace) and receiver (party, service, interface and namespace) as well as information on maps (their GUID and name as well as namespace).
SXMSPFRAWH: this table contains runtime performance data for successful message and sender and receiver information is stored as address id that derive information from SXMSPFADDRESS, from this table you can find out volume and latency also.
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i

Similar Messages

  • URL for communication channel monitoring

    Can anyone help me out with the url for communication channel monitoring as we have for adapter engine monitoring
    http://<host>:5<sys#>00/mdt/amtServlet     
    Mudit

    Hi,
    http://hostname:server/rwb/index.jsp
    to monitor the CC go to RWB and click display...there u will find CC...........click on it then u can check the cc log.
    Regards,
    Pphani

  • Alerts for Communication Channels

    Hi All,
    I wanted to know whether it is possible to trigger alerts if an error occurs in the communication channel.If yes,how do I go about it?
    Thanks and Regards,
    Jishi

    Hi,
    For Alert rules configuration:
    Remove the Check from Suppress Multiple Alerts of this Rule
    For where did the error occur, see that you have selected Radio button with 'No Restriction
    When creating the Alert Category, have u put some parameters in Container tab and Long and Short text.
    If allt he above is done check if you have any dumps in ST22.
    Regards
    Vijaya

  • Table for Communication structure Info Objects

    Hi all,
    Is there any table which has list of all infosources along with the Info objects assigned to it.
    I tried to see in RSKSFIELD but some of the infosources are not present in this table.
    regards,
    Rk

    hi krishna,
    RSIS for the available Infosources but this is for the transaction data. If you need to know which Infosource is from which Infocube then check RSUPDINFO table.
    RSDCUBE table: displays the list of available cubes.
    RSODS table: to find the ODS/DSO.
    regards,
    raghu.

  • Availability Times For Communication Channels

    I'm am new to XI.   I have been trying to set the Comm channels to run hourly during between the hours of 9:00 AM and 6:00.  I have used the Planning availability times procedure to try accomplish this. Just for testing I have the channel set up to run every 10 minutes after an hour I set it up to stop.    I receive an alert when ever my comm channel is scheduled to start and stop,  but the channel does not stop.Is there something I am missing that still needs set up?  Any help would be greatly appreciated.
    Thank You
    Carl Seidita

    Hi Carl
    Check out all your steps as per below....it will help you to find out issue..
    http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
    Nilesh

  • Error for Communication Channel Monitoring

    Hi
    Getting the following error when trying to read the file using Content Conversion.
    Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified!
    Pls. suggest me where it's gone struck.
    Regards,
    Yeswanth.

    Hi Gabriel,
    I has given in sender comm channel
    =>set processing mode : test
    and in Receiver comm channel. am using FTP login
    so, here i just read this file and then placed using FTP in R/3 system.
    Now, am getting the following error.
    Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified.
    even i checked my input data also...it's every thing fine.
    File content : 32 fields
    input data i has given : 32 fields showing correctly
    Pls .give me the solution ASAP.
    Regards,
    Yeswanth.

  • Communication Channel information in abap tables

    Hi ,
    Could you let me know any abap table which contains information about communication channels in PI 7.0.
    I have checked the following link
    Re: XI--Table for communication channels
    But the table SMPREL3 is not active in our data dictionary. is there any other table which stores this information.
    My requirement is to get the list of all channels which have quality of service as EOIO in the processing tab of the comm channel.
    Let me know if there are any other ways of checking this.

    Hi,
    Some tables in following blog:
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0366444450DB00849302769976173098End?blog=/pub/wlg/2754
    Regards,
    Giuseppe

  • Configuring a Communication Channel for an AE other than the default IS

    Configuring a Communication Channel for an Adapter Engine other than the default engine.
    See:  help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
    It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
    I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    Maybe some background would be helpful:  This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape.  BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.

    Hi Anesh,
    >>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    in order to use some other adapter engine you
    have to install it first by dafault only one
    (central) adapter engine is used and it is all
    most clients need
    if you'd like to use some other adapter engine
    (decentralized for example) have a look at thid guide:
    <b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

  • Party communication channel for multiple stores with multiple user id and passwords in sap pi

    Hi Exeperts,
    I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company   with single user id and password in communication channel.
    but requirement  is changed now  i have 20 stores  with 20 user id and password for communication channel.how can i achieve this requirement?
    Can i create 20 communication channels  for 20 stores  or can handle through the party based communication ?
    Please  help us achieve the requirement.
    Regards
    Ravinder.s

    Hi,
    In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
    1. 2 business components/2 SOAP receiver communication channels.
    2. 1 receiver determination with xPath for username to determine correct business component
    3. 1 interface determination
    4. 2 receiver agreements (one for each cc)
    Hope this helps,
    Mark

  • Communication Channel in error

    Communication Channel in error though the error has been resovled. New files are processed succesfully !!!
    CC still in RED.
    I tried the basic steps which can change the status .( by deactivating the channel and activating the same , stopped and started the same ) . It resulted the same.
    Thanks,
    Karthik

    The information that is displayed for the status of a channel on the individual cluster nodes is status information that is accumulated to give the overall status of the channel in the table of communication channels.
    If the cluster nodes have at least one status that is above all other statuses in the status hierarchy, the channel receives this status as the overall status. The possible statuses correspond to those in the table of communication channels and have the following hierarchy:  (red),  (yellow),  (green), and  (gray). A combination of green or yellow with gray is not possible.
    ○       The information displayed for the processing entries of the selected cluster node is current runtime information on message processing. You get to Message Monitoring by selecting the message ID displayed.
    Depending on the adapter used, the type and occurrence of the information here can differ. The information forms the entry in the Processing Errors column in the table of communication channels. The newest result is taken from the table of the cluster nodes.
    ○       The information about channel administration displays when and by whom a channel was previously started or stopped. You can only start or stop a communication channel for an entire server cluster, not on individual cluster nodes. However, since errors can occur on individual cluster nodes during the execution of these actions, error information is also displayed for each cluster node.
    ○       If the channel is controlled by availability times, the Availability Times tab page is displayed. All other availability times that are relevant for this channel are also displayed. You can exclude specific availability times and, if necessary, reschedule them.
    Since only active availability times are displayed, it is possible that availability times do exist for the selected communication channel even if none are displayed.
    ○       The information on the Settings tab page displays how often an attempt is made to send messages to this channel, and at what time intervals.
    The default settings are taken from the outbound properties for the J2EE service SAP XI Adapter: XI. You can overwrite and save these values. You can also restore overwritten values.
    Information about changes made to the settings is always displayed.
    The Settings tab page is only relevant for receiver channels and is therefore only displayed for channels of this type.
    regrads
    chandra

  • If message failed at communication channel, then need to send idoc to R/3

    Hi folks,
    i got a requirment like .....If message failed at communication channel, then need to send idoc to R/3.
    can anybody suggest the possible solution.

    HI
    If you use a catching a MAIL - PI ALERT and based on that alert if u creating an IDOC then it is good if u really supress the alert immediately once the ALERT comes but if u really check and supress the ALERT fine Otherwise a CONTINOUS IDOCs will get created at SAP system.
    Also there might be some natural generic reasons for communication channel fails
    a)  somtimes if the target FTP is down
    b)  if there is some issue with FILE ENOUGH
    c)  If File adpater is placing same file already exists or with already Opened by some target application
    d)  Dynamica file naming issue. (technical issue)
    WHy cant u do scenario in the below steps without keeping BPM, CATCHING ALERTS which doesnt give exact QUARANTEE
    Do one thing make a technical design in such a way into 1 flow or 2 flows in worst case
    In INTERFACE MAPPING-->
    a) Insert your current Normal Graphical mapping
    b) Javamapping:- This code will take the first mapping output as Input through Stream Transformation and create a same FILE through JAVA FTP Comments at specified Cleint Location. I recommend in order to avoid direct interraction of writing a file at client FTP better always write at your Local PI NFS Application outbound directory which doesnt require host name and user and pwd. Even if it requires you can do a RFC lookup and maintain a host, Port, User ID, pwd, Directory, FIle naming pattern in that table or else simply DO VALUE MAPPIING and pass it through XML INPUT from FIrst mapping as additional fields
    c) WITH IN THE SAME JAVAMAPPING: -
       If it successfully writes a file - wRite a TRACE log ("FILE NAME+ Sucecssfully written+ File Bytes")
       Then create an simple small XML OUTPUT and PASS that JAVA MAPPING OUTPUT To 3rd Grahical Mapping as Input it might be less than 5KB.
    Note: - Remember that this output XML should be ina Multmapping SPLIT MERGET FORMAT with 1 FIELD or required INFO
    as KEY FIELD INFO using DOM FACTORY
    d) GRAPHICAL MAPPING: -
      SOURCE IS JAVAMAPPING OUTPUT and TARGET HAS 2 messages
                           Message 1) SAME INPUT SMALL XML OUTPUT COMING FROM JAVA MAPPING OUTPUT
                           Message 2) IDOC TY{E STRUCTURE
    Keep a Condition based on KEY VALUE Coming from source field execute either 1 Message1 or Message 2
    In this way you can complete in a single Flow. 
    Later you can deifnee a simple flow to PICK and DROP from SOURCE file  Writing through javamapping to client location Or else
    WRITE A small OS SCRIPT and CALL in Receiver FILE COMMUNICATION at OS Command so that while writing a LOG file it will move the file from Source FTP to CLient FTP location.
    Regards
    Amar Srinivas Eli

  • Communication Channel Monitoring using CCMS/Solution manager

    Hi ,
            I have configured everything in solution manager for message monitoirng of PI system, but my requirement is to monitor communication channel error in ccms.
    Is there any possibilty to trigger alerts for communication channel errors ??
    Regards
    Veeramalla

    Hi,
    Please refer following threads
    SAP Solution Manager and PI
    In addition you can refer solution manager wiki:
    http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager
    Regards,
    Deepak
    Edited by: Deepak  Shah on Feb 23, 2011 11:15 AM

  • XI: Sender JDBC Communication Channel is not getting picked the records

    Hi All,
    Here I 'm facing an Issue with my sender JDBC communication Channel. Previously it was working fine but It is not Picking the records from the JDBC table.
    Communication Channel is in active mode only.
    I have checked in RWB communication Channel monitoring there i didn't get any error or success messages but channel is showing healthy status only(Green)
      But i had created the new communication channel..with the same parameters which are in the older communication channel.. and sender agreement level also i had changed.. so now  new channel is working fine.... I didn't understand what is the problem with previous communication channel.
    Thanks

    Hi yadav,
    do you have TWO CCs polling at the same time via JDBC?
    This could be the problem --> a conflict between both CCs.
    Switch off ONE CC:
    Regards Mario

  • How to resolve conflict in ID  Communication channel

    Hi  Experts ,
    I am getting conflict while importing a communication channel in QA . Basically we have done a change in Interface determiantion in dev system to get this change refelcted iin QA instead of transporting only interface determination whole config scenario has been transported . Transport got imported succesfully but while activating the change list it failed and shown conflict in Communication channel . Now If in Object tab I select SELECTDSPLAYED VERSION  then geeting error merge relation is null if selecting the displayed version then changelist get rejected .in that case it works now but in future also I will not able to make any change in the communication channel and whenever I make change and try to activate it it shows the same version conflict issue .
    KIndly help me with your inputs in this regard as sooner or later these transport will be moved to production and I want to keep myself prepared before it goes to production.
    Regards,
    Saurabh

    Hi Saurabh Sharma,
    Sorry for missing out that, this issue is with ID (Integration Directory)
    I think this has gone wrong in your case. Only interface determination has been changed, but, you have imported whole configuration scenario (along with communication channels).
    SAP help [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/39/f3103e02db137de10000000a114084/frameset.htm ] . Note the following for communication channels: To avoid messages being sent from a productive system to systems in the test landscape, the Integration Builder only exports a selection of attributes. Therefore, address data (host, port) and access data (user, password) are not contained in the export. In the adapter metadata in the ES Repository, such attributes are flagged as not transportable (they depend on the adapter type and are fixed). Once new objects have been imported, you must add the non-transportable attributes in the target system. These additions are retained in any further import of the object.
    FYI. Unlike when importing in the ES Repository, when importing objects to a directory, version management always creates a new version for the objects.
    Solution, as you are not able to activate objects in ID (Integration Directory) due to error message, reject them. Export only Interface determination and import it in QA system.
    Regards,
    Raghu_Vamsee

  • Table for pricing komp and komk.

    Hi gurus,
    My requirement is i need to get a transparent table for 'Communication for Pricing Header' Structure is KOMK.
    I need the table or view or through any function module by which we can get the pricing data.
    I have values from table VBRP and VBRK.

    Hi
    Try the standard Fm " PRICING".
    Tables for refernce : KONV and T683s.
    Cheers
    Ravish

Maybe you are looking for