XIServer:LCR_ERROR:No own business system

Hi Experts,
I am having a inbound scenario SOAP - > XI - > PROXY where I am gettiing the following error while testing from SOAP UI for Sender SOAP Adapter.
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:LCR_ERROR:No own business system
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
 at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:910)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
 at java.security.AccessController.doPrivileged1(Native Method)
 at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault
I have tested the SLDCHECK, SLDAPICUST and also the LCRSAPRFC working fine. Also the business system in SLD is OK.
I have no clue why the error is thrown.
Please help me in resolving the issue.
Thanks,

Check if the user mentioned in SLDAPICUST is locked. What is the type of Business System used in SLD?
Regards,
Prateek Raj Srivastava

Similar Messages

XI server: External XML to SAP interface: No own business system

Hi, we have inbound XML interfaces into SAP via XI using JMS queues. We have a dev, test and int. test environment. The dev and test environments work OK. The int. test environment has just been set up. The XML appears in the XI server, viewed via monitor SXI_MONITOR. It has a red flag error, within the XML trace, No own business system, seee below for full msg. I've test in config and the receiver is determined correctly. Can anyone help? Using XI version 3.0, SP14.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="CONFIG">LCR_ERROR</SAP:Code>
<SAP:P1>No own business system</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No own business system</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

hi,
have you tried executing TCODE - SLDCHECK
on your XI ?
if not check it and see it everything
is ok over there
if not check your busines system inside SLD
Regards,
michal

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
Error while reading ID of own business system from the SLD for system D18 and client 200
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

SLD Error in IE:Error while reading ID of own business system from the SLD

Dear Champs,
Scenario : JDBC to Proxy(APO system)
We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>R/3 Sys ID</SAP:P1>
<SAP:P2>"Client"</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Manikandan

Hi Mani,
Solution 1:
Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
Solution 2:
Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Parties, Business Systems and Business Services

Hi guys,
I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD, and for Web service I use Business Service... just as we use business services for web services
--- Am I right here? Will it work ok in reciever determination, agreement?
Thank you.

Hi,
You are doing the usage of business systems and services in proper way.
The scenario will difinately work with combination of business system and service.
It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
Please see below the importance of Parties, Business Systems and Business Services
A communication party
A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process.
You can assign a communication party one or more services to address it as the sender or receiver of messages.
A business system
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
A business service
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Thanks
Swarup

What is the difference between Business System and Business Service?

Hi
Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
Best Regards
Ravi Shankar B

HI,
Business system:
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service:
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Regards,
Sudheer.

Business System and Business Service

Hi,
A lot of confusion in this situation .When we will go for a Business System.. and When we will choose Business Service...we are using some SAP systems only.. even though we are configuring those as a business services...
can any one clarrify some clearly..
Thanks
babu

URL
http://help.sap.com/saphelp_nw04/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm and then navigate back up the tree to the Service heading
I have provided an excerpt from the documentation
Business System
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.

Need to include the R/3 Business system in SLD.

Now i need to include the R/3 Business system in SLD.
To do that i have to establish an RFC connection, could anyone guid me what type of RFC connection i need to use like HTTP connection or else other..... Get me the details.

The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

XI system as a business system in XI SLD?

Hello,
I recently saw an XI SLD where not just the R/3 business systems, but also the XI system itself was configured as a business system. Is there any need to have the XI system itself in its own SLD as a business system?
If yes: Do I also have to configure transport target for the XI business system (e.g. from XI dev to XI prod)?
Thanks,
Christoph

Hi,
yes the XI has to be configured as business system with role 'Integration Server'.
Regards
Patrick

Business system name important for IDoc scenario message routing?

Hello all,
I have following problem.
I have to setup with our client an IDoc scenario which is a little difficult.
The client sends project IDocs from Client ERP system to his own XI system next to our XI sytem and at last Internal Order IDocs to our ERP system. We use for each environments (DEV, TEST, PROD) a separately SLD, the client a central SLD. In each environments we use the same business name for our XI system "BS_XI". Now the problem. The client aren't able to configure two times the same business name "BS_XI" for routing to our TEST respective Production environment. DEV will not used. I know the B2B scenario should be used in this case but i have no chance to think about this. Manager decision!
So what can be the workaround.
I think about to provide our client a different Business system name "BS_XI_PROD" with different technical system informations for our PROD environment. So for my understanding, the business system name is unimportant in this case, important here the technical informations which you are able to see in "Display Adapter-Specific Identifiers". Technical system, Port and RFC configuration.
The namings convention for Business system is unimportant in this case, yes?
Many thanks in advance!
Regards,
Jochen

Dear Jochen,
Can you please clarify a bit? Is it a problem between customer's XI system and your XI system?
I think you can use Parties here. In the Party you can define some additional identifiers, with which you can differentiate the incoming IDocs.
(e.g.: in the identifiers tab, Agency=BS_XI, Scheme=ALE#KU (defined in the customer's partner profile), Name=a defined name in the IDoc control record)
So with this you will have a "Business System+Party" as an identifier, where you can use several parties with the same business system.
I hope it helps!
Regards,
Andras

XIServer:LCR_ERROR:No own business system

Similar Messages

Maybe you are looking for