XI server: External XML to SAP interface: No own business system

Hi, we have inbound XML interfaces into SAP via XI using JMS queues. We have a dev, test and int. test environment. The dev and test environments work OK. The int. test environment has just been set up. The XML appears in the XI server, viewed via monitor SXI_MONITOR. It has a red flag error, within the XML trace, No own business system, seee below for full msg. I've test in config and the receiver is determined correctly. Can anyone help? Using XI version 3.0, SP14.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="CONFIG">LCR_ERROR</SAP:Code>
<SAP:P1>No own business system</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No own business system</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

hi,
have you tried executing TCODE - SLDCHECK
on your XI ?
if not check it and see it everything
is ok over there
if not check your busines system inside SLD
Regards,
michal

Similar Messages

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Adding a interface to a Business system

What permissions do i need to be able to add interfaces ..sender and reciever to a business system. If the business system is defined as a third party system..can i add the sender and reciever interfaces.
venkat

Aamir,
Can you elaborate a bit...what i was looking for was this..when you have a business service...in the tab for reciever i can assing the inbound and/or outbound interfaces.
Thats what i meant. of course we do have to create the rest of the Configuration items.
However in my case we are unable to add the inbound and outbound interfaces to the Business system...Why..?
That was my issue.
Venkat

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

SAP PI Modeling: Two Business systems with party

I am triing to create SAP BPVT Interaction model that describe connection of 2 process components. Each of that components must be business systems with party. As I understand process component must be Process component at business partner for assigning business system with party.
If I create SAP BPVT Interaction model with two Process component at business partner, I get they connection in type of "Other Interaction". When I try create new assigment, I get error "Unable to assign the model to this connection type due to the method or profile in use".
How can I create correct connection?

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

No interface Idoc in Business system Receiver

Hello,
I have one question concerning my interface for receiver.
My scenarion is File to Idoc and when I configure my receiver determination, and I choose my business system receiver 'BS_ER6CLNT001' I don't find my interface 'CREMAS.CREMAS05' insinde, I have to click first to 'All' and there I find it.
Is it normal? Because I receive in 'sxmb_moni' the error receiver could not be determined.
Thank you,
Mohamed.

Hi
This is not like that. It depends on the software component in which you have imported the idoc.
If the software componet where the idoc was imported ,is included in the Business System then you can find all the interfaces,idocs,rfcs directly.
In your case you might have imported the CREMAS in a different software component ,which is not included in your Business System.
You can just check by adding that softwar component to Business System in SLD,then you can
try in Integration Directory .
Thanks
Prasad Nemalikanti

Testing same interfaces from other Business System

Hi,
Till now we have been testing with BIDCLNT100.
Now we want to continue testing with BIDCLNT200 for which there was no config before.
Apart from adding new Business System for new client in SLD, what is needed to be done in ID to configure interfaces for this client.
Regards,
Anirudh.

Hi Prateek,
I think I also need to add the SWCV which are used for these scenarios to this new BS in SLD.
Please confirm.
Also, will there be any changes in IR?
regards,
Aniurdh.

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Missing Inbound Interface under Edit Service for Business System

Hello All,
I have to configure a Scenario at Integration Directory. Import from IR already done.
When i try to configure a Service under Party\Service\Business System I am not able to find the special IDoc type (here) PROJECT:PROJECT01 under register card "Receiver" (Inbound Interfaces) for the SLD defined Business System.
How can i add the IDoc type here?
Many thanks in advanced?
Regards,
Jochen

Hi,
please let me explain more in detail. All answer not really facing my problem.
At Integration Directory i want to create a Business System Service for a external incoming connection.
When i try to create under the Scenario e.g. "IS_WBSElements" the Service " BTS_Partner" under \Party\<partern>\Service\Business System\ at Display Service i couldn't find the IDoc Type PROJECT.PROJECT01. This will displayed at Display Services under Point Business System "Receiver" card (Inbound Interfaces"). There is a list of some Inbound Interfaces displayed with column Name, Namespace and Software Component Version.
When try to add a different Business System under Party\Service e.g. BTS_CCM i get much more Inbound Interfaces displayed incl. PROJECT.PROJECT01.
Perhaps there is a relation between Inbound Interface and the Business System?!
Many thanks in advance!
Regards,
Jochen

Related Integration server for Business System in SLD

HI All,
IN SLD we have one Technical System for PI and one TS for R/3 System.
When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
It is having None and Business System of PI TS System.
Please help me in this.
Regards,
Sree

Hey
Looks like you are defining this Business system as a Integration server.
See here is what you need to do.
Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
If yes,then simply select that
Thanx
Aamir

No interfaces listed for ECC Business System in PI 7.1 for intrf. Detrm

Hi all,
I have come across this situation earlier, did some settings in SLD ..tech system...(Don rembr it nw....)
I am not able to see the list of interfaces for an ECC Bus.System during Interface determination,
I manually have to key in the name of the BAPI instead of the values appearing in the value list....
I am sure that the is something missing while havin created the BS and TS in the SLD,
Can someone guide me what my approach would be.
Replies much appreciated. Thanks

Hi
Please assign the software component(Product) in which you have imported your BAPI in IR to your
Business System in SLD.
Then you can see all the interfaces of that software component in your Business System(ECC) in ID.
So just add the software component to your Business System in SLD then you can get the interface in
ID.
Check the following link for the same issue.
Re: No interface Idoc in Business system Receiver
Thanks
Prasad Nemalikanti

Business system - inbound interface issue

Hello,
I have created a business system in SLD and assigned required SWCV in installed products tab.now i imported that business system in to ID.
But in my business system i am not able to find the inbound interfaces of perticular SWCV. (able to see some other i/b and o/b interfaces)
i have configured SLD perfectly. ( in business system -installed products tab i have assigned the SWCV and product and check box was ticked). but the same SWCV and it's interfaces are not reflecting at the ID>business system.
now this business system is using in so many interfaces. so i can't reimport again. So kindly suggest how can i get the inbound interfaces to my business system in ID.
Thanks in advance.......SARAN

Hi,
Check Cache Overview to see if you are facing any problem,
also if you create the BS with the proper SWC, etc etc. and few days later you define a new SWC to this BS, you have to refresh the configuratio in the SLD-->I mean, go to BS and check if all SWC associated are selected. if not, select them and try again. this is important if you want to define a routing rule in the Receiver determination.
Now if you are in the ID and you cannot see directly services filtering by BS, dont care just change the filters to ANY ANY and you will see all services.
Hope Helps
Thanks
RP

Adding Message Interfaces to Business System

Hi All,
Can anyone tell me how and why we dont add message interfaces to a business system??..
The business system corresponds to Tech system which has software component...right?...
so how do we get interfaces from diff components into the same business system?

Hi Ravindra,
The logical relation ship between Business Systems Technical Systems, Product and software components is as follows.
1) Each business system will be associated with a technical System.
2) Each SWCV will be a part of a Product.
3) A Product is Installed on a Technical system.
4) Multiple Products can be installed on a technical system.
5) So, multiple SWCVs can be installed in a technical system.
6) hence a Business system can have Message interfaces belonging to different SWCVs.
Regards,
ravi

SAP's own database system ?

why not sap creates its own database system other then using the Microsoft ,Oracle and IBM's database's , which can reduce the sap installation cost for customers

Hello Siddesh,
have you ever heard of MaxDB? It was formerly called SAPDB. Support for MaxDB is not for free, but cheaper than the other RDBMS. The feature set is limited, but you get (almost) all you need for SAP systems.
SAP MaxDB
Regards,
Mark

Convert SQL server database into SAP readable (encrypted) XML for SAP tool?

Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

So If I understood it correctly there an existing propriertory question bank with SQL server. You are looking at an option to migrate all the tests and questions from the existing system to the LSO system. Right ?
I am still not clear on the xml conversion. Have you guys found a solution which could be achieved through a xml file ?
am not aware of a way through which you could import only a xml file and create tests/questions. If you have a sample xml file then forward me so that I could do some testing on my end.As per my knowledge you could do one of the following. I
1. Create the tests and questions manually in Authoring Environment. It will be a time consuming task. Based on the number of questions you have you might have to assemble a team of content developers to acheive this.
2. Alternatively, you could create a Adobe Flash based assessment. The Flash component would be the front-end and will read from a xml file to display the questions and to drive the funcationality. This would be a easier and less time consuming than creating the assessments manually in authoring environment. However, you might miss out some of the functionality available in the Test Author of Authoring Environment unless you have all the functionality replicated inside Flash. This would require one time effort in creating the Flash template and the xml file structure. Once that is created you could create multiple assessments by just replacing the xml file. If you select this approach then you would have to ensure the data from SQL is converted in the desired xml format required by your Flash component.
Please let me know if you require any further guidance or clarification regarding this.
Regards,
Ravi Sekhar

XI server: External XML to SAP interface: No own business system

Similar Messages

Maybe you are looking for