XL Report coming Blank

Dear Expert,
I have issued in XL Report.
I have one XL Report that can be open in Test Database but when i same Report open in Live Database it's coming blank.
Or sometime it's not give full result.
For Ex: I generate report AP Credit Memo for Period Dec - 2010
Total 2 Document for this period.
In test database it's give correct result but in live database it's display only one document
& for other period it's totally blank.
Thanks & Regards,
Tushar Nathwani

Dear Julie Jamieson    ,
Thanks for your reply.
If any filter on Sales Employee or any other filed then it's also not displayed in Test Database.
Because same report working in Test Database but its not working in Live Database.
Thanks & Regards,
Tushar Nathwani

Similar Messages

  • FEP 2010 Antimaleware action reports showing blank

    Hi,
    We have configured FEP 2010 with SCCM 2007. Every reports was working but suddenly now antimaleware action report showing blank for last week.
    When checked FEP dashboard it shows infected systems but its report is coming blank.
    So please help.

    Hi,
    The FEP DashBoard shows the data that is active in SCCM, the historical data and more in depoth reports are genrated from another database the FEP Datawarehouse, There are SQL Agent tasks that synchrinise this data and normally this error is caused by a
    problem whit these jobs. Here is a post on the error and where to start to look.
    http://social.technet.microsoft.com/Forums/forefront/en-US/57375e2c-6785-4680-a86e-99324afb4388/fep-reports-history-not-working-fepgetnewdatafepdw111-sql-job-fails?forum=FCSNext
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Report is Blank after Click on Save button

    Hi All,
    I am having a Real Time Infocube, which is been used by Monthly and Yearly report separately using different Aggregation Levels.
    During Monthly report testing, I made changes in Yearly Report (common for monthly as well) and clicked on SAVE button.
    As a result, a new request generated into the Cube, whereas my old request (yellow one) was still there and was containing only 700 records.
    Step1:
    Now,  after that when I activated aggregation level. The output of the report was blank.
    Same thing happened with monthly report also.
    Step2:
    So, I deleted that new request from Cube after changing its behaviour from Planned mode --> Load mode.
    Now, when I tried to get it back. It was asking me to green the existing request (old request).
    Step3:
    when the cube was containing only old yellow request (before changing the behaviour) monthly report was showing me correct data. But, Yearly report was blank.
    So, I manually green the request and changed the behaviour to Planned mode.
    Whereas, Now (after changing behavior to Planned mode) both reports are blank.
    Please help!!
    Best Regards,
    Jatin

    Hi,
    first you the correct settings in transaction RSDIPROP for your InfoCube:
    On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
    Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
    - if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
    - if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
    - if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
    Now check the values of your query again.
    Note 1136163 contains the recommended cache settings in RSRT.
    Regards,
    Gregor

  • Crystal Reports 2008 - Blank page on server only

    Crystal Reports 2008 - Blank page on server only
    My report is developed in the Crystal Reports 2008 Report Designer 12.0.0.683.
    I have a .NET application that takes the report file, an ODBC connection and exports the resulting report to PDF. This application is deployed as an MSI and includes the Crystal Reports .msm merge module. The report uses multiple views and tables from a single database to create invoices in PDF format.
    Problem: For one particular invoice, a blank page is being added to the end of the invoice. This blank page contains the report's standard page header. There is no missing data and no missing sections on the invoice. This is only occurring when the pdf is generated on a Windows Server 2008 x64 server where the application is deployed using the merge modules.
    I have installed the application locally on my Windows Vista Business x86 system and the generated PDF does NOT contain the blank page at the end.
    The blank page is not generated when previewing the report in Report Designer. For the particular invoice this is occurring on, footer F and footer G are blank and therefore suppressed.
    Please bear in mind that this happens only for one particular invoice that uses this report file and does not happen from my local system using the same .rpt file.
    The report is constructed of the following sections:
    -Page Header (suppressed on page 1)
    -Grp1 header A (watermark conditionally suppressed based upon a parameter)
    -Grp1 header B (Keep together - always fits onto a single page)
    -Details
    -Grp1 footer A (Keep together)
    -Grp1 footer B (Conditionally suppressed based upon data)
    -Grp1 footer C (Keep together)
    -Grp1 footer D (Contains sub report(suppressed when blank). Keep together. Suppress blank section. New page before but (Not OnLastRecord))
    -Grp1 footer E (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
    -Grp1 footer F (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
    -Grp1 footer G (Contains sub report(suppressed when blank). Keep together. Suppress blank section.)
    -Report footer (Always blank. Suppress blank section)
    -Page footer (Fixed static content, displayed on every page.)
    Edited by: alibaabaa on Oct 12, 2009 12:41 PM
    Edited by: alibaabaa on Oct 12, 2009 12:45 PM

    Thanks for responding, Jonathan.
    Is the same runtime installed on the 64 bit system? I notice from your version number that you do not have any service packs installed on the dev system. SP 2 is out and may help.
    I have installed SP1 and SP2 this morning, resaved the report file and tried again but the same problem remains.
    I'm not sure how to answer your runtime question. I am using the same application built with the same merge modules on both the dev machine and the production server. Of course, the dev machine has the additional complication of having Crystal Reports 2008 installed. Perhaps this is causing the difference?
    Compare the printer settings between the two systems. Try installing the same printer driver on the 64 bit system.
    Perhaps I am misinterpreting your suggestion, but I am not printing the invoices. I am only exporting them to PDF. It is the PDF that has the extra page. Is there a 'print to PDF' driver of some sort that I need?
    Also, was the .NET application compiled as 32 bit, or Any CPU? Whichever it was, try switching it then recompiling to see if that helps.
    I tried switching to Any CPU but this caused the Crystal Reports module not to load at all on the 64bit Windows server.
    Thank you for your suggestions, but my problem remains. Is it worth trying with the redistributable msi rather than using the merge modules? If so, could you recommend which one I should use? I am using Visual Studio 2008 Professional.

  • Webi report link to other webi report opening blank page

    I have put the hyperlink to link to the other webi report. But once I click on the links. It open the report with blank page. I have tried it in View mode or Edit mode, the browser will open up another blank page. Following is my links:
    <a href="http://server_name:28080/OpenDocument/opendoc/openDocument.jsp?sType=wid&sRefresh=Y&sWindow=Same" title="Page1" nav="web">Link to Page2</a>
    any advice? Thanks

    http://server_name:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AciEzxbPmxdHtQwnB4RHaCo&sType=wid&sIDType=CUID&sWindow=New
    Make sure the followings:
    1. The webserver runs at port 8080 (if not, use the correct port)
    2. the CUID is correctly copied.
    3. the target report here is a webi report. (sType=wid)
    4. the server name is correctly mentioned.
    5. you are using JAVA environment.
    If still this does not work, then please let us know :
    Are you getting any error? if yes, what error you are getting.?

  • Deski reports appear blank.

    Hi I can find data in BO XI 3.1 universe(connected to Sql Server 2008) but my Deski reports appear blank, any reason?

    Hi,
    If you are not getting any error message in reports it mean no issue in the connectivity. ODBC DSN i think so you have already setup.
    Have you tried with some sample report along with one or two objects only. see if you are getting the data or not.
    Copy the report SQL and see if you are getting the data in SQL client.
    Regards,
    Amit

  • Report is blank

    Hi all,
    Am new to this forum. We are using Financial reporting studio. In that when i click on a folder i could see the report in the GRID, but out of blue the report is blank. Could this be because the connection to the database went wrong? how do i  check the connectivity or is there something else that i need to look into ? Please need help.

    You could check the FRClientLogging.log under <FinancialReportingStudio_home>\diagnostics\logs\FinancialReporting folder for any errors.
    Thanks,
    KK

  • Some Monitoring Reports Are Blank

    Hello,
    We have deployed monitoring reports for Lync 2013 on SQL 2012 mirrored back end database servers.  When I try to open any reports under System Usage Reports, the report is blank.  For example, if I try to open report called "User Registration
    Report", it is blank.  However, if I open any reports under "Media Quality Diagnostic Reports" like "Server Performance Report", it works fine.  So, just wondering why I don't see any data for reports like "User Registration
    Report".  The SQL account I'm using has full sysadmin role on the SQL server.  Thanks.

    Hi,
    Please check if FE server have MSMQ with Directory Services integration installed to complete the message chain between FE and Monitoring server.
    Here is a similar case may help you:
    http://social.technet.microsoft.com/Forums/lync/en-US/6dfeaaf7-10e6-407c-a8e3-7485f210139b/lync-monitoring-server-empty-reports
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Invoice printout is coming blank through VF02 for New Output Type

    Hi ,
    I have copied a existing output type and create a new one and also copied a smartforms attached to the existing output type and created a new one. Because we want to create a new Invoice with different Layout so we have done this excercise. Now we have done all the required changes and create a new invoice with a new output type with the new layout. I can see the print perview properly, but when i take a print a blank paper comes out and printer goes in idle position and the printer spool also shows the status printing it does not gets complete while the LPDA show printing finished . What would be the reason. How can we resolve this problem. Has anybody gone through such situation?
    Regards
    Edited by: nau on Apr 16, 2010 2:19 PM

    Hi Hari,
    I have mantain VV32, but still the printout is coming blank and also the spool is showing blank doc. While in the Print Preview it is coming Proper. 
    Regards
    Edited by: nau on Mar 24, 2011 9:45 AM

  • BI Bean report shown blank

    What could be the reason for BI Bean report shown blank?
    1. I have checked that data is present in all the hierarchy fields in the dimension tables.
    2. I have checked all the dimenion ids used in the fact are present in the dimensions.

    Could you please log a TAR with Oracle Support using Metalink to resolve this issue. Our Support team can work with you to identify the exact problem.
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • EWA report getting blank report

    Hi,
    I have configured system in SOLMAN to gnerate EWA report, all the steps have been done succesfully.
    but the report is blank when in checked, what could be the reason.
    searched in SDN and check all the possiblities.
    Please help.

    Hello Saad,
    Depends if it is really a blank EWA or just not generated due to missing trust center settings in word - for that you could check SAP Note 199123.
    If ti is ABAP and the icon is a document ( not red, yellow, green, grey rated) then please review sap Notes 1496931 and 1415702, depending on what SP level you are on. If it is a Java system and is Grey rated it will also be blank, then you need to check SAP Note 1332428 for the T/S guide attached andcheck  Note 762696.
    These are the most common reasons an EWA might be blank.
    Also check the session in DSA and see if anything more comes to light.
    However if this doesn't help resolve, please provide as many details as you can.
    Regards,
    Paul

  • Crystal Report Coming out Blank

    Hi Guys
    I have been struggling for days now with a my vb.net app that is using sql server as DB. I am creating a crystal report but it seems it always comes out blank when i use my dataset as the datasource. If i change the datasource to my-pc it all works fine
    but i dont want this as it will be using another server after deploying the app.
    I have created a CrystalReportViewer1 and a rptAllEmployeesSalaries.rpt crystal report .The report is displaying data from two tables which i used an INNER JOIN Select statement. This is my code on the form load event;
    Private Sub frmrptAllEmployees_Load(sender As Object, e As EventArgs) Handles Me.Load
            Dim rpt As New rptAllEmployeesSalaries 'The report created.         
            Dim myConnection As New SqlConnection(ConfigurationManager.ConnectionStrings("TMS.My.MySettings.xConnectionString").ConnectionString)
            Dim MyCommand As New SqlCommand()
            Dim myDA As New SqlDataAdapter()
            Dim myDS As New xDataSet4 'The DataSet  created.  
            myConnection.Open()
            Try
                MyCommand.CommandText = "SELECT employeeWork_infor.jobTitle, employeeWork_infor.status, employeeWork_infor.branch, employeeSalaries.salary, employeeWork_infor.employeeSurname, employeeWork_infor.employeeName, employeeWork_infor.employeeNo
    FROM employeeWork_infor FULL JOIN employeeSalaries ON employeeWork_infor.employeeID = employeeSalaries.employeeID"
                MyCommand.CommandType = CommandType.Text
                myDA.SelectCommand = MyCommand
                MyCommand.Connection = myConnection
                myDA.Fill(myDS, "employeeWork_infor")
                myDA.Fill(myDS, "employeeSalaries")
                rpt.SetDataSource(myDS)
                CrystalReportViewer1.RefreshReport()
                CrystalReportViewer1.ReportSource = rpt
            Catch Excep As Exception
                MessageBox.Show(Excep.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
            End Try
            myConnection.Close()
        End Sub
    End Class
    Please help my report always comes out blank im not sure why
    Trevor

    Thanx Venkat786
    1) i tried Running my T-sql query in SSMS and it does give me the data that i     want.
    2) I put the "myDS.WriteXml("c:\temp\result.xml")" before my set datasource line inside my code and it does write all the retrieved data to the result.xml file.
    3)When the designer previews the report it populates it with what looks like sample data and not data from my DB.
    From steps 1 & 2 it looks like all is working fine not sure if the result im getting on 3 is ok, but still after all this my report is still coming out blank.
    Would really appreciate it if you continue to assist...
     

  • Printed XML Purchase Order Report - Printing blank Blanket PO page

    Hi,
    When printing the xml report of a Blanket PO Release, the release lines and headers print first but the last page is a page for the primary blanket PO (PO Num without any releases attached). This page does not contain any information in the header or line fields therefore it is a waste of paper. Looking into the XML code the blanket PO page is pulled in the same manner as the Release lines, against G_Headers. I'm going to look into the Reports Developer SQL to see if I can find something but I would rather not mess with the configuration of the SQL if I did not have to.
    Any ideas on how to get rid of this extra unnecessary page?
    Thanks,
    -Steve

    Hi,
    RDBMS : 11.2.0.1.0
    Oracle Applications : 11.5.10.2
    OS: Unix
    The issue can be reproduced.
    The report in question has had customization but the blank page prints in the Printed Purchase Order Report(Portrait) seeded function as well. From what I see the SQL might be able to modified based off of the input paramet "Print Blanket PO". When this is selected "No" the Blanket header is printed with no lines (that's where the blank PO page is coming from). When selected Yes the blanket header with all the blanket lines are printed. So I may be able to go in and change how that input parameter changes the output, unless there is a better way.
    -Steve

  • Sales Analysis Report - Items -- blank result

    Hi,
    I'm testing a setup and running the sales analysis report. It works for the Customer version but I get no results when running on Items.
    I'm on SBO 2007A SP01 PL07. There are open and closed invoices for inventory items; no credit memos have been posted. All Item type invoices.
    When I run by Customer, I get the correct data - open and closed invoices for that customer.
    When I run by Items, I get no results. The date range is the same for both reports.
    When I run the purchase analysis on Items, I get data for the same items I am trying to see in the sales analysis.
    Any ideas what could be causing this?
    Thank you,
    Heather

    HI Gordon,
    I left the default settings: 
    - Annual Report, Invoices, Individual Display, No Totals
    - Posting Date:  whole fiscal year
    - Main selection:  left blank/default (group = all, no properties)
    I have double/triple/quadruple-check even the Secondary SElection to make sure there's nothing there.
    I have also run it on Due Date instead of Posting Date, still no results (if run on Items).
    As I mentioned, the selection criteria is what I want but for some reason that one version, Items, does not work. The other 2 tabs work with the same selection.
    Heather

  • Sales Analysis Report - Monthly report shows blank output

    Hi,
    When i run the Sales Analysis Report - Customer (Annual) report for a data set it shows the correct data - large number of invoices
    However, there is no output available (blank output) when i use the the Monthly version of the same report using the same parameters. Even when i am taking the widest possible range of data sets ( large date range; no properties; All customers) i am not getting any output.  I am using Individual display.
    Please help out.
    Regards.
    Edited by: Manish Chaturvedi on Jul 14, 2009 11:56 AM

    hello
    In sales analysis report have u given posting date for a particular month if not give and select client /customer in group and run the report u will get exactly if not then u do have any postings for a particular month and definr due date that means posting period also
    regards
    jenny

Maybe you are looking for