XML-25003: Failed to find config file 'XSQLConfig.xml' in CLASSPATH

I am getting XML-25003: Failed to find config file 'XSQLConfig.xml' in CLASSPATH in the employee information sample. I copied to 'XSQLConfig.xml' OC4J_HOME\j2ee\home\lib and still it not working.
Where do I need to put the 'XSQLConfig.xml' file?

Where did you put your 'XSQLConfig.xml'?

Similar Messages

  • Wireless: wpa_supplicant failed to open config file [SOLVED]

    Hi,
    I'm having trouble configuring my wireless network. At the moment I'm following the guide from the wiki, I can scan for networks but when i try to connect with wpa_supplicant I get following error:
    Successfully initialized wpa_supplicant
    Failed to open config file '/dev/fd/63', error: No such file or directory
    Failed to read or parse configuration '/dev/fd/63'.
    So far I've tried to google the problem, but haven't found a solution that works. I hope you can point me in the right direction.
    Additional info:
    'ip link' provide following output:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: wwp0s29u1u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
    3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:24:d7:af:98:dc brd ff:ff:ff:ff:ff:ff
    4: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether f0:de:f1:53:66:eb brd ff:ff:ff:ff:ff:ff
    And lspci:
    lspci -k | grep Network
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
    And dmesg:
    dmesg | grep firmware
    [ 2.379351] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
    [ 2.379368] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
    [ 2.382114] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 8.560626] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
    I guess it have something to do with the firmware, but I'm not sure, as when I googled the problem I stumbled upon a site stating that the wireless card should be supported by the kernel.
    Last edited by cube2 (2015-01-07 14:00:34)

    Yes it is on the same line as this:
    sudo wpa_supplicant -D nl80211,wext -i wlp3s0 -c <(wpa_passphrase "SSID" "key")
    systemtcl list-units
    systemctl list-units
    UNIT LOAD ACTIVE SUB DESCRIPTION
    proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
    sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/backlight/acpi_video1
    sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-drm-card0-card0\x2dLVDS\x2d1-nv_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-LVDS-1/nv_backlight
    sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
    sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2dLVDS\x2d2-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-2/intel_backlight
    sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 6 Series/C200 Series Chipset Family KT Controller
    sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
    sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/rfkill2
    sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0
    sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
    sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill3.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3
    sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.1-tty-ttyACM0.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.3-tty-ttyACM1.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.6-net-wwp0s29u1u4i6.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.9-tty-ttyACM2.device loaded active plugged F5521gw
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged INTEL_SSDSA2M160G2LE 1
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged INTEL_SSDSA2M160G2LE 2
    sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged INTEL_SSDSA2M160G2LE
    sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged MATSHITADVD-RAM_UJ8A2
    sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
    sys-devices-platform-thinkpad_acpi-rfkill-rfkill1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill1
    sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
    sys-module-configfs.device loaded active plugged /sys/module/configfs
    sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
    sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
    sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
    sys-subsystem-net-devices-wwp0s29u1u4i6.device loaded active plugged F5521gw
    -.mount loaded active mounted /
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    run-user-1000.mount loaded active mounted /run/user/1000
    sys-kernel-config.mount loaded active mounted Configuration File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted Temporary Directory
    systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    session-c1.scope loaded active running Session c1 of user jakob
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running dhcpcd on enp0s25
    [email protected] loaded active running Getty on tty1
    kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
    systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
    systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
    systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
    systemd-backlight@backlight:nv_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:nv_backlight
    systemd-fsck@dev-disk-by\x2duuid-69c2b129\x2dd95a\x2d48f7\x2d84de\x2d058ba5f97b42.service loaded active exited File System Check on /dev/disk/by-uuid/69c2b129-d95a-48f7-84de-058ba5f97b42
    systemd-journal-flush.service loaded active exited Trigger Flushing of Journal to Persistent Storage
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-random-seed.service loaded active exited Load/Save Random Seed
    systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
    [email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill3
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
    systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
    systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    pstree
    systemd─┬─chromium─┬─chrome-sandbox───chromium─┬─chrome-sandbox───nacl_helper
    │ │ └─chromium─┬─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/662}
    │ │ │ └─{WorkerPool/663}
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ └─{OptimizingCompi}
    │ │ ├─12*[chromium─┬─2*[{Blink GC Sweepe}]]
    │ │ │ ├─2*[{Blink Heap Mark}]]
    │ │ │ ├─{Chrome_ChildIOT}]
    │ │ │ ├─{CompositorRaste}]
    │ │ │ ├─{Compositor}]
    │ │ │ ├─{HTMLParserThrea}]
    │ │ │ └─{OptimizingCompi}]
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{CompositorRaste}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/155}
    │ │ │ └─{WorkerPool/156}
    │ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
    │ │ │ ├─2*[{Blink Heap Mark}]
    │ │ │ ├─{Chrome_ChildIOT}
    │ │ │ ├─{CompositorRaste}
    │ │ │ ├─{Compositor}
    │ │ │ ├─{HTMLParserThrea}
    │ │ │ ├─{OptimizingCompi}
    │ │ │ ├─{WorkerPool/666}
    │ │ │ └─{WorkerPool/667}
    │ │ └─chromium─┬─{AudioOutputDevi}
    │ │ ├─2*[{Blink GC Sweepe}]
    │ │ ├─2*[{Blink Heap Mark}]
    │ │ ├─{Chrome_ChildIOT}
    │ │ ├─{CompositorRaste}
    │ │ ├─{Compositor}
    │ │ ├─{FFmpegDemuxer}
    │ │ ├─{HTMLParserThrea}
    │ │ ├─{Media}
    │ │ ├─{OptimizingCompi}
    │ │ ├─{WorkerPool/688}
    │ │ └─{WorkerPool/693}
    │ ├─chromium─┬─chromium
    │ │ ├─{Chrome_ChildIOT}
    │ │ └─{Watchdog}
    │ ├─{AudioThread}
    │ ├─{Blink GC Sweepe}
    │ ├─2*[{Blink Heap Mark}]
    │ ├─3*[{BrowserBlocking}]
    │ ├─{BrowserWatchdog}
    │ ├─3*[{CachePoolWorker}]
    │ ├─{Chrome_CacheThr}
    │ ├─{Chrome_DBThread}
    │ ├─{Chrome_FileThre}
    │ ├─{Chrome_FileUser}
    │ ├─{Chrome_HistoryT}
    │ ├─{Chrome_IOThread}
    │ ├─{Chrome_ProcessL}
    │ ├─{Chrome_SafeBrow}
    │ ├─{Chrome_SyncThre}
    │ ├─{CrShutdownDetec}
    │ ├─{IndexedDB}
    │ ├─{LevelDBEnv.IDB}
    │ ├─{LevelDBEnv}
    │ ├─{NSS SSL ThreadW}
    │ ├─{NetworkChangeNo}
    │ ├─{OptimizingCompi}
    │ ├─2*[{Proxy resolver}]
    │ ├─{WorkerPool/1890}
    │ ├─{WorkerPool/1936}
    │ ├─{chromium}
    │ ├─{extension_crash}
    │ ├─{gpu-process_cra}
    │ ├─{handle-watcher-}
    │ ├─{inotify_reader}
    │ ├─{renderer_crash_}
    │ └─{sandbox_ipc_thr}
    ├─2*[dbus-daemon]
    ├─dbus-launch
    ├─dhcpcd
    ├─login───startx───xinit─┬─Xorg.bin─┬─xf86-video-inte
    │ │ └─{Xorg.bin}
    │ └─awesome───{gmain}
    ├─systemd───(sd-pam)
    ├─systemd-journal
    ├─systemd-logind
    ├─systemd-udevd
    ├─xterm───bash───pstree
    └─xterm───bash

  • Spotlight fails to find existing files

    ?- why should spotlight sometimes fail to find files that are already on drives attached to our fileserver?
    Is there anything I can do to 'force' a rigorous search?

    Spotlight is notorious for its weaknesses and erratic behavior. You might try reindexing your Spotlight. Open up Spotlight in Sys Prefs, go to Privacy and drag the HD Folder there. Leave it a minute then remove it by clicking on the minus at the bottom. This will force Spotlight to reindex the drive, which may take some time.
    I mostly use EasyFind (free) instead of Spotlight.
    http://www.devon-technologies.com/products/freeware/

  • Multicast fails: Cannot find the file specified

    I have a deployment share that works great for unicasting, and I've now tried enabling multicast in preparation for a big rollout. The namespace was created successfully in WDS, and I've made sure my switches have IGMP snooping enabled, (multicast
    with Ghost works), however the process always falls back to unicast.
    LTIApply.log has this to say
    <![LOG[------ Applying Windows image using ImageX.exe ------]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim using ImageX]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\ReferenceImage]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1672)]LOG]!><time="10:59:58.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1672)]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Windows Deployment Services Multicast Client [Version 6.3.9600.16411]
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Copyright (c) Microsoft Corporation. All rights reserved.
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Transfer Started.
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Transfer Complete [0x80070002].
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Operation Failed. [0x80070002].
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > The system cannot find the file specified.
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console >
    ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > ]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = -2147024894]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer could not be completed, rc = -2147024894, falling back to using \\DeployShare\DeploymentShare$\Operating Systems\ReferenceImage\ReferenceImage.wim]LOG]!><time="10:59:59.000+000" date="07-23-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    During the deployment, I checked C:\MININT\Operating Systems\ReferenceImage, and sure enough the folder was empty. Any thoughts on why this process would be failing, or why it needs to even transfer the image file locally in the first place?
    Gracias

    Not sure what is going on here, not enough logging. Have you tried enabling WDS logging on the server side?
    The WDSMCast.exe tool can't find the file on the server side, you might want to verify that the namespace was created correctly. The "DeploymentShare$" namespace should point to whatever local directory is on your machine.
    wdsutil /get-allnamespaces 
    http://technet.microsoft.com/en-us/library/cc742155.aspx
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Spotlight in "Open Dialog" fail to find "Numbers" file

    Hi,
    when i use the spotlight search tool inside the open dialog box from Numbers it seem to be unable to find "Numbers file".
    Let say I have 4 files on my Hard Drive :
    - FileName1.xls
    - FileName1.Numbers
    - FileName2.xls
    - FileName2.Numbers
    If I type "FileName" in Finder > Spotlight It get all the 4 files.
    If I type "FileName" in Numbers > Open Dialog > Spotlight it get :
    - FileName1.xls
    - FileName2.xls
    Either I check or not different search options (filename / content / Start / My iMac ...)
    Any idea what's wrong ?
    Thank you.

    Bonjour,
    Concernant votre dernier message :
    oui, j'ai vu votre capture. C'est du Page, pas du Numbers :-) une différence serait possible, mais lire la suite ci-dessous...
    La corruption d'index est une piste. Mais comme Spotlight trouve mes fichiers dans d'autres conditions, cela indiquerait un Index correct. Toutefois, ce point est très technique et je ne ferrais aucun pari sur la "mécanique" d'Index Spotlight. J'ai donc utilisé l'outils recommandé dans la discussion donnée en lien (je n'aime pas trop l'idée qu'un outil tiers bidouille les entrailles de l'OS d'Apple, mais bon). Apparemment l`'outils détruit l'index et Spotlight se met au travail et ré-index le disque.
    Mais cela n'a rien changé.
    j'aimerais approfondire un peu si vous le coulez bien. Avec 37 805 points vous devez avoir quelques ressources en réserves ;-)
    Appelons ça le "bogue" ; même s'il peut s'agir d'un problème de paramètre quelconque modifié maladroitement dans mes préférences systèmes ... En explorant différentes pistes et en vous les soumettant je peux peut être vous mettre sur la voix d'une solution qui ne vous vient pas immédiatement à l'esprit car très spécifique à mon cas particulier.
    Nous sommes d'accord sur ce point : la recherche dans Numbers > Ouvrir est une implémentation de Spotlight. Manifestement cette implémentation est pleines d'options et présente des différences significatives avec le Bureau.
    Exemple 1 :
    Dans Finder la recherche par type > autre est un champ vide.
    Dans Numbers la recherche par type > autre est une liste de choix.
    Il semble que Spotlight dans Numbers ne prennent en considération que les fichiers que Numbers peut ouvrir. Et pour cela il se base sur l'extension. Et le bogue fait penser que les développeurs auraient oublié l'extension ".numbers" !
    ------------ EDIT
    J'ai effacé tout une série de tests tant la découverte finale est la plus importante ...
    En modifiant l'extension d'une application en .numbers elle est apparue dans ma fenêtre Numbers !
    J'en conclu que "mon" Numbers n'affiche via spotlight QUE les fichiers portant une extension compatible (xls, cwk, txt) ET que le fichier est de type "binaire / app / ???".
    L'erreur serait sur ce dernier aspect : les fichiers numbers ne sont PAS des fichiers "binaire / app".
    Ou orienter les recherches, puisque, manifestement, ça marche sur votre Mac ?
    Merci d'avoir étudier cette longue réponse.
    --Edit
    Numbers trouve les .php (des fichiers text assimilable à des executables) mais ils sont grisés donc impossible de les ouvrir.
    Là je dis, ça devient du n'importe quoi .... :-(

  • Fail to find the file include

    I am building a game and I just simply use a txt file to store the level reached.
    Everything goes smooth but today I find something wrong.
    I have included a levelrecord.txt in the included files section in iphone iOS setting.
    But I find that after the app was installed, the apps can't read the number inside the text file, so I write the following codes to test in my iphone.
    var testfile:File = File.applicationStorageDirectory.resolvePath("levelrecord.txt");
    showtesttext.text=String(testfile.exists);
    It returns False.
    But after I play the first level, the text file is updated and then the above codes return True. And the apps can successfully update the level.
    However, if I uninstall the app and reinstall it, the problem comes again and the number had to be read after I play the first level.
    Did I accidentally change any settings therefore my text file is not included in installation? Because it works before, but I don't know when it started to have problem...
    Thank you very much!

    Maybe the last message in this page might help?:
    http://forums.adobe.com/thread/728997?decorator=print&displayFullThread=true

  • Cannot run project - Cannot find config file bc4j.xcfg (9.0.5.2)

    Hi all,
    I've gotten myself in a situation and can't find my way out. I've got a project that does not use any business components. Just as a test, I created a business component (View Object, I think - can't remember for sure), and then deleted it and another file or two associated with the object shortly thereafter. Now, whenever I try to run the project (F11), I get the following error:
    oracle.jbo.JboException: JBO-33001: Cannot find the configuration file /com/my/package/datamodel/common/bc4j.xcfg in the classpath
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:345)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at oracle.adf.model.servlet.ADFBindingFilter.initializeBindingContext(ADFBindingFilter.java:328)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    I am assuming the error is related to the business object that is no longer there. My guess is that there is some reference somewhere that is telling JDev that there are business components associated with this project. I just can't find where that reference is (or my assumption is wrong ;) ).
    Does my project need the bc4j.xcfg file if it does not use any business components? Can anyone provide any guidance?
    Thanks for any help,
    Andy

    Thanks for the reply. I looked at the link supplied but didn't see how that could help me. Could you provide a little detail regarding what I need to do or where I need to look?
    And I want to make clear that I do not have and do not want any ADF components in my project at this time. I am simply looking to get my non-ADF project running locally as it used to do before I added and then deleted a component.
    Thanks,
    Andy

  • Advice on config file

    Hi guys and gals. I currently use a config.ini file for all my database set up (URL, driver manager, etc). My application is made up of two JAR files, one for the server-side, one for the client. I have put my config file in with my JAR and call it like so:
    InputStream is = ClassLoader.getSystemResourceAsStream("com/dmsltd/rmi/config.ini");
    As you can see I have put it into the rmi package of my application. Is this a sensible place? I am starting to think not. Would it make more sense to have the config.ini file outside my JAR file? The reason I ask is what if the network administartor at a site decides to change the IP address of a machine, or decides to use a different port number for RMI calls...this would require changing the config file + re-archiving. If the config file was called from outside the JAR, all that would need to be changed would be the config file.
    If anyone can steer me in the best direction, I would be ever so grateful.

    I suspect I wouldn't be able to use the ClassLoader to access a file from outside the JAR file. Not so, the technique you used there should find the file anywhere in your classpath. So it doesn't have to be in a JAR file, it could be in a directory in your classpath.

  • Adding external .properties files to a MANIFEST classpath

    Hi all;
    I want to package my application as an executable jar (let's call it app.jar), but leave the config (.properties) file outside of it, so it can easily be edited after deployment. The config file should be added to the classpath, so that it can be loaded with ClassLoader.getResourceAsStream().
    However, even though I add the directory where the config file lives to the classpath in the manifest of app.jar, it is not found by getResourceAsStream(). But if I package the config file in a separate jar (config.jar), and adds config.jar to the classpath of app.jar's manifest, it works.
    Could someone explain why the config file is not picked up when not in a jar?

    This external classpath thing for jars is quite frustrating.
    But actually you can reference external directory, it does not have be in the exact same folder as the jar.
    Lets say in the folder you have:
    app.jar
    lib/WrapperFramework.jar
    config/config.properties
    You can load the properties from a folder by:
    - in code, use "class.getResourceAsStream("/config.properties");", the initial "/" is important, otherwise some package string is prepended.
    - in manifest, use "Class-Path: lib/WrapperFramework.jar config/", the last "/" is important, otherwise it doesnt work. Super confusing since "." works fine.
    Note that the folder in classpath is considered to be relative to the folder in which the original jar file is located. Hence if you execute jar from a random folder, the classpath is not broken (that's fortunate).
    Edited by: AJG on Nov 15, 2007 5:33 PM

  • XSQL-003: Failed to find 'XSQLConfig.xml' file in server CLASSPATH.

    Hi,
    I'm trying to make the Tomcat 1.3.2 to work with xsql servlet, and have followed the instructions on how to do it, but i get the : XSQL-003: Failed to find 'XSQLConfig.xml' file in server CLASSPATH. - error.
    What am I doing wrong?
    null

    Forget it...
    I had pasted in:
    set CLASSPATH=%CLASSPATH%;directory_where_XSQLConfig.xml_resides
    istead of:
    set CLASSPATH=%CLASSPATH%;C:\xsql\lib
    works now....
    null

  • CRM 2015 Installing fails: Action MicrosoftCrm.Setup.Server.BackupUpgradeDataAction Failed Could not find the file 'C:\intpub\wwwroot\web.config'.

    I don't have many issues... but when I do it is usually a bad one.   
    I took my CRM 2013 install running on Server 2008 and did an upgrade to server 2012 R2.  No issues.   All updates applied.  From there I run the CRM 2015 installer to run the upgrade..... Yes, running as admin, and after the "Pre Flight
    Check"  everything is good.   From there the install starts to copy files.....  I get this error. 
    00:16:43|   Info| CrmAction execution time; BackupUpgradeDataAction; 00:00:03.0020974
    00:16:43|  Error| System.Exception: Action Microsoft.Crm.Setup.Server.BackupUpgradeDataAction failed. ---> System.IO.FileNotFoundException: Could not find file 'C:\inetpub\wwwroot\web.config'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite, Boolean checkHost)
       at Microsoft.Crm.Setup.Server.BackupUpgradeDataAction.Do(IDictionary parameters)
       at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
    I am finding no references to this issue any where.   Looking for suggestions.   It appears that this file does not actually exist.   Somewhere during the upgrade maybe it got deleted.     I have put an old web.config file in this
    path, rebooted everything and still get the same error.
    Looking for some suggestions.
    Pierre Hulsebus

    Sounds like a problem with the information about where the Crm website is installed. Crm uses 2 registry values 'website' and 'websitepath' under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM. Do these look correct, and is the Crm website under c:\inetpub\wwwroot,
    or elsewhere ?
    The last part of the 'website' value is the website id, which you can see in IIS Manager
    Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

  • Where can i find the doc about xml config file of 9ias?

    i cant find the "Oracle9iAS Containers for J2EE User&#8217;s Guide",
    it should contains the info about the xml config file, i dont
    know why oracle launch a product without the config guide, i
    have read ton of material for learning the configuration of 9ias
    but still have not find the answer!
    i cant find it in otn:
    http://otn.oracle.com/tech/java/oc4j/content.html#technicaldocs,
    it have jsp, servlet....etc guide but no config guide, if
    someone seen it in microsoft or sun or borland website, please
    call me :)

    i mean the deployment config file in the application server like: server.xml, application.xml, web.xml, it is the J2EE standard, and can be used between all application server, tomcat, 9ias, weblogic........

  • Startup class cannot find a config file.

    I have written a startup class to configure log4j in Weblogic.
    The class runs but cannot find the configuration file. The
    code for the startup class is as follows....
    package com.n2bb.ams.common.util;
    import java.io.FileInputStream;
    import java.io.File;
    import java.io.IOException;
    import java.net.URL;
    import java.util.Properties;
    import com.n2bb.ams.common.util.FileLocator;
    import org.apache.log4j.xml.DOMConfigurator;
    * Insert the type's description here.
    * Creation date: (12/5/00 11:12:13 AM)
    * @author: Administrator
    public class ApplicationStartUp implements weblogic.common.T3StartupDef {
         * ApplicationStartUp constructor comment.
         public ApplicationStartUp() {
              super();
         * setServices method comment.
         public void setServices(weblogic.common.T3ServicesDef arg1) {
         * startup method comment.
         public String startup(String arg1, java.util.Hashtable arg2) throws Exception {
              String resource = null;
              try {
                   resource = (String) arg2.get("configFileName");
                   System.out.println("ConfigFileName: " + resource);
                   URL configFileResource = ApplicationStartUp.class.getResource(resource);
                   System.out.println("configFileResource: " + configFileResource.toString());
                   String file = configFileResource.getFile();     
                   DOMConfigurator.configure(file);
                   return "Log4j configuration initialized completed.";          
              } catch (Exception e) {
                   System.out.println("Cannot open config file: " + resource);
                   return "Log4j configuration failed to initialized.";
    The section of the config.xml the calls my startup class looks
    like....
    <StartupClass
    Arguments="configFileName=/bea/user_projects/mydomain/log4j-config.xml"
    ClassName="com.n2bb.ams.common.util.ApplicationStartUp"
    Name="AMS Startup Class" Targets="myserver"/>
    I have tested the code in a standalone class and it works fine.
    Why can't I find the log4j-config.xml file? Any help would be
    greatly appreciated.

    Wow, your system must have a long history of having picked up assorted bad stuff ...
    You have CleanMyMac2, which should definitely be removed.
    You have other stuff (MacCleanse, for example) that I don't have first-hand knowledge about but should very likely be removed.
    You are using Google Chrome which is a resource hog.
    Further, your Adobe Flash player is not current.
    If I had all these issues, I would do a clean install of Yosemite and only reintroduce the essential stuff.
    You can search for the .plist files by opening finder, holding down the Option key, and doing Go > Library from Finder's menu and then searching for the file(s).

  • XML file in the form of .config file how to convert it to class and store it in single object

    Hi,
    I have a config file in which i have to convert it to class and get an object.
    example:
    <?xml version="1.0" encoding="utf-8" ?>
    <xyz xmlns="">
      <Container name ="Basic">
        <Connectivity user="" server="" protocol="udp"/>
        <Connectivity user="" server="" protocol="udp"/>
      </Container>
      <Container name ="Cp">
        <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
          <domain name="audio">
            <section name="headset">
              <setting name="audio_in_agc_enabled " value="1"/>
            </section>
            <section name="incoming">
              <setting name="use_agc" value="1"/>
            </section>
            <section name="vad">
            </section>
          </domain>
          <domain name="system">
            <section name="qos">
              <setting name="audio" value="tos 46"/>
            </section>
            <section name="dtmf">
              <setting name="force_send_in_band" value="0"/>
              <setting name="minimum_rfc2833_play_time" value="40"/>
            </section>
            <section name="network">
              <setting name="dtx_enabled" value="0"/>
            </section>
            <section name="diagnostics">
              <setting name="enable_logging" value="1"/>
              <setting name="log_level" value="Error"/>
            </section>
            <section name="general">
              <setting name="add_OS_version_to_user_agent_header" value="1"/>
            </section>
            <section name="indialog_notify">
              <setting name="enable_indialognotify" value="1"/>
            </section>
          </domain>
          <domain name="rtp">
            <section name="2833">
              <setting name="enabled" value="1"/>
              <setting name="packet_time_in_ms" value="60"/>
              <setting name="payload_number" value="101"/>
            </section>
            <section name="inactivity">
              <setting name="timer_enabled" value="0"/>
            </section>
          </domain>
          <domain name="proxies">
            <section name="proxy0">
            </section>
            <section name="proxy1">
            </section>
          </domain>
          <domain name="ggg">
            <section name="device">
              <setting name="use_headset" value="1"/>
              <setting name="rrr" value="1"/>
              <setting name="eee" value="480"/>
              <setting name="eme" value="hhh"/>
              <setting name="headset_name" value="vvv"/>
              <setting name="manual_audio_devices_configure" value="0"/>
              <setting name="audio_in_device" value=""/>
              <setting name="audio_out_device" value=""/>
              <setting name="ringer_device" value=""/>
            </section>
            <section name="system">
              <setting name="export_settings" value="EndpointSettings.xml"/>
              <setting name="enable_export_settings" value="0"/>
              <setting name="log_level_AbstractPhone" value="0"/>
              <setting name="log_level_Audio" value="0"/>
              <setting name="log_level_Auto Configuration" value="0"/>
              <setting name="log_level_CCM" value="0"/>
              <setting name="log_level_Conferencing" value="0"/>
              <setting name="log_level_Contacts" value="0"/>
              <setting name="log_level_DNS" value="0"/>
              <setting name="log_level_GUI" value="0"/>
              <setting name="log_level_Jitter" value="0"/>
              <setting name="log_level_Licensing" value="0"/>
              <setting name="log_level_Media" value="0"/>
              <setting name="log_level_Privacy" value="0"/>
              <setting name="log_level_RTP" value="0"/>
              <setting name="log_level_STUN" value="0"/>
              <setting name="log_level_Security" value="0"/>
              <setting name="log_level_Storage" value="0"/>
              <setting name="log_level_Transport" value="0"/>
              <setting name="log_level_USB Devices" value="Info"/>
              <setting name="log_level_Utilities" value="0"/>
              <setting name="log_level_Video" value="0"/>
              <setting name="log_level_Voice Quality" value="0"/>
              <setting name="log_level_XMPP" value="0"/>
              <setting name="log_level_Endpoint" value="6"/>
            </section>
            <section name="beeptone">
              <setting name="play_locally" value="0"/>
              <setting name="enable_beeptone" value="1"/>
              <setting name="beeptone_file" value="beep.wav"/>
              <setting name="beeptone_timeout" value="30000"/>
            </section>
            <section name="dtmf">
              <setting name="play_locally" value="1"/>
              <setting name="pause_start_stop_dtmf" value="100"/>
            </section>
            <section name="control">
              <setting name="auto_answer" value="0"/>
            </section>
            <section name="ctrol">
              <setting name="auto_ans" value="0"/>
            </section>
          </domain>
        </settings>
      </Container>
    </xyz>
    Please help me out in creating an object from it.
    Thanks,
    Hiranmayee

    It's one of those things you usually start from the other end.
    IE with a class and then serialise / deserialize to xml.
    Because you have a namespace in there:
    <settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
    I think you will find linq to xml will have issues with that.
    You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
    Why do you want to turn that into an object?
    By the way.
    This isn't a wpf question and you should probably have posted it on the c# forum.
    Hope that helps.
    Recent Technet articles: Property List Editing;
    Dynamic XAML

  • Offline Servicing of OS fails (failed to find properties of file 5)

    Hi,
    I'm unable to get the Offline Update Servicing of the OS to work. In the OfflineServicingMgr.log I Keep getting:
    Failed to get update applicability. Dism.exe command line is below:"C:\Windows\system32\cmd.exe" /q /c ""D:\Microsoft\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\dism.exe" /Image:"D:\ConfigMgr_OfflineImageServicing\I0100042\ImageMountDir" /LogPath:%WINDIR%\Logs\Dism\dism_sccmAMD64.log /English /Get-PackageInfo /Packagepath:"D:\ConfigMgr_OfflineImageServicing\fc1721b9-7ee8-44a6-9842-b7d89596f126\KB2890660.cab">>D:\ConfigMgr_OfflineImageServicing\I0100042\[email protected]"
    after this happened 5 times I get the following:
    Failed to find properties of file 5
    UnMounting Image (Commit Changes = 0) ...
    Completed processing image package I0100042. Status = Failed
    I also checked the dism_sccmAMD64.log but can't find a solution to this Problem, there are to much Errors in there.
    dism_sccmAMD64.log:
    2014-08-27 10:34:49, Info DPX Started DPX phase: Apply Deltas Provided In File
    2014-08-27 10:34:49, Info DPX File could not be expanded, Source=update.mum, Target=(null), status=0x80070002
    2014-08-27 10:34:49, Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab
    2014-08-27 10:34:49, Info DPX Ended DPX phase: Apply Deltas Provided In File
    2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020102
    2014-08-27 10:34:49, Info DPX Ended DPX phase: Resume and Download Job
    2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020217
    2014-08-27 10:34:49, Info CBS Failed to extract file update.mum from cabinet \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Info CBS Failed to initialize internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Error CBS Failed to create internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to open the package at location: "D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the list of packages from the command line. - CPackageManagerCLIHandler::ProcessCmdLine_GetPackageInfo(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed while processing command get-packageinfo. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
    2014-08-27 10:34:49, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the PE Provider. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat
    2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/system32/smi/store/Machine/schema.dat

    Right before, the error you mentioned, I see a couple of file not found message. You might want to check those, still it can be anything from a file that doesn't exist till too little disk space.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for